I stuttered for years. Singing helped me and my husband would build my self esteem.
@zachwilliams7632
4 жыл бұрын
Well I’m working on a 64 c10 with about 9 different layers of paint and I’m in the market for a da and Baxter was the one I wanted to go with however with the covid 19 I’m steering clear of all unnecessary travel and my nearest harbor freight is 1 hour and 45 minutes away 😡....upon searching for a review Of this particular sander you are the only one I could find and done a thorough job ....well done no need to watch another
@keithclark486
2 жыл бұрын
9 layers of paint' did you use paint stripper on it first?
@Peteanigans
4 жыл бұрын
Cool I've been interested in this sander for wet sanding clear coat. It looks like it will be good for that imo. Thanks for taking the time to make this review 👍👍
@thewatersedgechronicles3508
4 жыл бұрын
Yes , This is what I have been using it for myself !
@Danny-rk4xf
4 жыл бұрын
The "2.24" CFM is unfortunately a huge marketing scheme. The "CFM" is measured at a certain duty cycle, which can be anything to the manufacturer. The "SCFM" is the number that accurately represents how much air is being consumed as long as the trigger is depressed. This sander is pulling over 16 SCFM!!!!!! It's crazy how many loopholes exist in marketing. I used to think CFM numbers were very straight forward, then wondered why my 5.1 SCFM compressor can't keep up with a 3 CFM die grinder. Thats because the die grinder is 3 CFM based off a very low duty cycle. Even with my upgraded 10 SCFM compressor, my "3" CFM die grinder still manages to drain the compressor faster than it can keep up
@LFM80
4 жыл бұрын
Thanks for the video, great info! I saw the two different models myself today, and thought the 2.24 would be better for my needs due to the lower air usage but your video changed my mind for sure. Someone had placed a $29 model in the 2.24cfm box, so I didn't make the purchase and now I'm glad I didn't. Keep the vids coming.
@dngendron
3 жыл бұрын
Getting close to that magic number! Thanks for the review doing some rust repair and then paint my E30
@Charmcity199
3 жыл бұрын
Thank you for this video! I restore and smooth cast iron pans (including new pans that have the rough factory coating) and my old tried and true electrical orbital has caused quiet a bit of muscle fatigue. Now I know which one to get!
@bryanhunter1927
Жыл бұрын
Excellent video I was on the fence about buying. You sealed the deal. Thanks .
@tonycastillo8228
4 жыл бұрын
Your review is really professional, I will keep in mind get one of does Sanders!!!
@SlimeDonkeyTV
3 жыл бұрын
Hey man, great review! I bought one that is 4.5 cfm, a 3M 6".. I think I made the right choice, by buying a higher cfm. I make some massive live edge slab tables, and I don't want to have to use the lower powered electric anymore.
@SquirrelsForAll
4 жыл бұрын
Thanks for sharing this, it was very, very helpful, especially coming from a professiona. Thanks!
@CorvusCorps
Жыл бұрын
Just stumbled across your channel. Very cool stuff.
@glfmarmadison5126
4 жыл бұрын
Great review, I’m looking for the 4 CFM. I need it for paint and body, as I restore classic Chevy trucks down here in Texas.
@lmac36
3 жыл бұрын
I’m leaving you a comment.. 😉Thanks for posting such a great review!
@anthonyfloresca5243
Жыл бұрын
Thanks ! For the tip showing the two different sanders I'd go for the 4.0 and from now on I'll pay more attention to the details on the box instead of just looking at the photo on the box it's kinda of deceiving because both boxes were in the same location Thanks ! again. Tony Floresca , Austin Texas
@mredmister3014
Жыл бұрын
I’m notorious for picking up the wrong box than what’s posted on the ad. Great video!
@jg296
Жыл бұрын
Thanks for letting us know I was about to go buy I like the 2.4 for cutting and waxing you keep up the good
@Gwill456
4 жыл бұрын
Nice to see you back!
@MrRedex88
3 жыл бұрын
Bought one today for my detail shop.
@timothypizarro2711
4 жыл бұрын
I would like to use it on a aluminum Hood thank you for your comparison opinion
@firebladex8586
2 жыл бұрын
This is common. Sometimes the paper instructions inside say something different from the box cover
@Patriot-hz8xk
26 күн бұрын
I have a single stage 60 gallon dewalt 155 psi compressor, and I had to go with the 2.2 cfm sander, as my compressor would constantly run with my old 7 cfm sander
@paullaird7944
2 жыл бұрын
It’s ok everyone deals with something
@strobaholic
4 жыл бұрын
The Baxter probably has a shorter throw than your other machine. A longer throw gives you a more aggressive cut (I think)
@eksine
4 жыл бұрын
he showed 2 baxters, you're talking the 2.24 cfm
@rpb1961
4 жыл бұрын
Yes one is for bodywork and the lesser is for refinishing and sanding before buffing.
@MRScrubNasty
3 жыл бұрын
So the baxter is gear driven so should rip more material than a standard DA. I think that Baxter is the gear driven but might be the other one.
@strobaholic
3 жыл бұрын
@@eksine he showed 3 machines. 2 Baxters, and another one that looks similar to the baxters. The third one was way more aggressive than both of the baxters. I bought the 4.0 Baxter to work on my boat. It’s pretty good. Worth the price. I swapped the stock pad for a Velcro pad because of personal preference. Baxter does make a gear driven machine. They’re even more aggressive than the 4.0, but are too aggressive than what I need.
@eksine
3 жыл бұрын
@@strobaholic you replied sort of 6 months late but you were talking about the baxter and I was clarifying for everyone that there were 2 baxters, the other one was a different brand so there was no need to clarify that one. it's like if this video showed 2 honda accords and 1 bmw. it's important to point out which honda accord you're talking about, that is all
@gwbo3381
3 жыл бұрын
Would be using it on my son's first truck
@joaquinsanabria2734
Жыл бұрын
Gracias Señor: un saludo desde Colombia
@eksine
4 жыл бұрын
thanks for the review
@derekthrone6726
3 жыл бұрын
hey man thx for the info cus i know my dumbass prolly ended up walking outa hf with that 2.24 and not even knowing they had a 4.0 now i gota go to garage and check ! but yeah man keep up tha good work
@sunilseepersaud2574
4 жыл бұрын
Trying to do body work on my car. im now starting out and will sub.
@sunilseepersaud2574
4 жыл бұрын
did this pass already? any who thanks for the information!
@edisoncommunications2060
3 жыл бұрын
Great video, helps a lot. Thanks!
@PathtoWealthPodcast
4 жыл бұрын
thanks for the video.
@SkyHighLew
4 жыл бұрын
Good video keep it up!
@jordonbrown6259
Жыл бұрын
Of the timed event, what was the brand and model of the second sander that clocked in at the 2min?
@toycoma98
2 жыл бұрын
That looks exactly like Husky, must be the same but rebranded.
@HyperspeedMedia
3 жыл бұрын
great info.. thanks
@jorypratt118
Жыл бұрын
Great review brother!
@lexidewans629
3 жыл бұрын
I just baught a air compressor. I would want to restaure a old murray select from 1998 that i got for free
@luckygray9396
3 жыл бұрын
Will a 6 gallon 175psi High Performance Hand Carry Jobsite Air Compressor operate an 6in Orbit Palm Sander? Just wanting to sand the bumper of ny daughters car and paint it.
@francsg7622
3 жыл бұрын
Thanks for the video
@JustMe-ob3nw
Жыл бұрын
Can you use this one for wood work?
@cdm1250uhf1
4 жыл бұрын
HOW DO YOU LIKE THE SANDER SO FAR?
@thewatersedgechronicles3508
4 жыл бұрын
Yes, I like the sander so far so good.
@tlop1355
4 жыл бұрын
What 5” da model and brand is it?
@thewatersedgechronicles3508
4 жыл бұрын
The 5'' sander was a Si Fang 3/16
@tlop1355
4 жыл бұрын
The Waters Edge Chronicles Can you send me the link of it
Пікірлер: 57