I love it! You got 3 bikes for the price of 1 grom after dealer fees and prep!
@ladyjedi3D
Жыл бұрын
This is such a good clear video. A few days ago we put my nibbi carb on and son tuned it a bit. I have no experience tuning any form of Barb, but at 55 yrs young, I love my Vader and need to learn. One of my questions is did you secure the Petcock onto anything. Right now my is hanging and not screwed onto anything yet. It’s just floating up above the carb. Where did you secure yours? Your idle sounds pretty low. I have mine up between 1 and 2 on the Speedo. Also can hear with ear when’re is feels good.
@jacktheirishwolfhound2978
3 ай бұрын
Cool bike 🚲
@nickfields7375
2 жыл бұрын
Dope brotha
@kylehogan6577
4 ай бұрын
What size jets you using please on the pe26 thanks again
@_BlueCollarGamer
7 ай бұрын
When you buy this Nibbi Carb do you have to buy a new throttle and cable? I thought I saw somewhere the stock throttle cable does not fit for some reason??
@indio0360
2 жыл бұрын
thank brooo if it wasn't for this video i will never make it
@straycatzamora1465
Жыл бұрын
That 125 is bitchin. Love the exhaust
@jessycruz3490
2 жыл бұрын
Question, I’m curious is there any benefit to the idle adjustment ? Or is it just preference on how the bike sounds ? Lol sorry I know nothing about carburetors thanks
@LittleBear85
2 жыл бұрын
I would say if your able to take it up to top speed without to much bog the lower the idle the better atleast now with gas prices I want it as low as possible.
@brianfrawley296
2 ай бұрын
Whered you get the muffler
@wyattgrant9598
5 ай бұрын
What is you’re Elevation I’m at 4500 will the pe26 run just fine and not need re jetted ?
@eduardorsanchez5853
2 жыл бұрын
GOOD VIDEO THANKS 👍
@jonathangarcia6102
Жыл бұрын
What did you mean when you said the last ring for the needle
@originalwoodandresinvideos6286
5 ай бұрын
Idle waaaaayyyy to low. It’s not a Harley. Correct idle 1400-1500 rpm
@JamesMcGraw-ph1el
6 ай бұрын
An idle that low will kill your battery, the stator in the engine need at least 1500 rpm’s to charge correctly, and a little higher for smaller bike, don’t end up spending more money my guy
@tanopenaloza2371
6 ай бұрын
So what would you say is a normal rpm to idle at?
@ridingtrailsbmx5337
Ай бұрын
@@tanopenaloza2371it says in swing arm but 1.5k
@Christopher_R
10 ай бұрын
The needle advice is helpful. What elevation are you at?
@LittleBear85
9 ай бұрын
Just above sea level maybe 50ft
@Cheeseguy738
Жыл бұрын
Is this the boom Vader? From redfox? And do you do the emission/Airbox delete, how did you put up all the tubes, thanks!!!
@Christopher_R
10 ай бұрын
His airbox is definitely gone. Just remove everything.
@jawwhs
2 жыл бұрын
what shifter is that? where did you get it, a link would be awesome if you could!
@LittleBear85
2 жыл бұрын
Here is the link sorry I didn't respond faster. a.co/d/7Efu4A5 HIAORS CNC Aluminum Folding Gear Shifter Shift Lever for Honda XR50 CRF50 XR CRF 50cc 70cc 90cc 110cc 125cc 140cc 150cc Lifan YX 160cc YCF Pitster Dirt Pit Bike a.co/d/7Efu4A5
@jrow79553
Жыл бұрын
Any advice for not starting after swap.
@fernandomartinez-oh7sj
Жыл бұрын
how do i move the needle cuz i couldnt
@Gallaxyz
2 жыл бұрын
How did you take off the original carburetor cap off in order to put the new one? I can't take the elbow piece off
@LittleBear85
2 жыл бұрын
I will make a video on how to get the top elbow off the cap of the carburetor to do the swap, but I'm currently banned from uploading yesterday I had tried to do an upload it was the 8th day of my one week ban so I'm hoping today I'll be able to do it.
@Gallaxyz
2 жыл бұрын
@@LittleBear85 it's cool I was just over thinking it appreciate you
@LittleBear85
2 жыл бұрын
I made the video :) but still have the strike so I was going to put it on rumble for now just so its up and visible it's to help people so if youtube doesn't want it right now that's fine. rumble.com/v1b0v6h-bd125-10-disconnecting-throttle-cable-from-carburetor-cap-to-swap.html
@MoNeYMoRriSoN
Жыл бұрын
Can we get the link for the carb.?
@becomingamotovlogermrgonza2300
2 жыл бұрын
Can I use the N 24 instead of the N26 ?
@LittleBear85
2 жыл бұрын
Yes the 24mm vs 26mm is just oversized you will need to adjust the pin for the flow to be correct.
@jarodwagner
Жыл бұрын
are VM22s carbs tuned and jetted out the box? is it "plug and play" or manageable to do as a newbie not mechanicaly inclined
@DailyCbr
Жыл бұрын
you prefer this over the mikuni?
@tyleresmondson3983
Жыл бұрын
What jet sizes are you runn
@LittleBear85
Жыл бұрын
I had kept the stock size jet in that came with the 26mm nibbi carb sorry I did not disassemble the lower portion of the carb all the adjustment needed was done in the topend.
@brianfrawley296
2 ай бұрын
And pipe
@ItsGreg22
Жыл бұрын
I got a 26mm nibbi for my boom vader but it bogs out, doesnt like to idle and dies, and raises and lowers rpms on its own for the time that it does idle. Any idea of what it could be?
@ItsGreg22
Жыл бұрын
Also my bike is completely stock besides the carb i put on
@tmo9301
Жыл бұрын
@@ItsGreg22 im in the same boat, i emailed nibbi and they recommended i use their 22mm carb
@NookieStudios
Жыл бұрын
You don’t need no attachments or nothing with this carb ? I got a icebear and ordered a carb for it and it’s been running like shit ever since . So trying to get a new one
@shanemandoh420
2 жыл бұрын
What kit/intake did you use.
@LittleBear85
2 жыл бұрын
I used the nibbi carb 26mm from Amazon don't buy on ebay unless you have to.
Пікірлер: 44