Thank you for sharing. My 2012 S4 is starting to act like that, at least now I have an idea if I decided to DIY. I wish you guys have a shop here in Norcal. It seems like you are a trustworthy shop, and of course fully knowledgeable with Audi, I rather let you work on my car and give you the $ than taking it to the dealership (can't trust them anymore, based on couple of experiences). Well, more power to BoostDynamicTuning. God speed.
@boostdynamictuning
2 жыл бұрын
Thank you for the kind reply. I wish I could help! I worked for Audi and there are smart techs but you're talking 2 out of the 10 techs. It's such a gamble and you can see I my self had an issue with Audi programing my unit. Such a headache, but the car is ripping now and ready for ported and polished blower!
@gilbertgesmundo8214
2 жыл бұрын
@@boostdynamictuning you’re right, it only takes 1 or 2 bad apples to contaminate the whole basket. Maybe I’m just one of the unfortunate ones. Well, Audi diagnosed my car with 2 issues; thermostat and the DSG. recommendation is mechatronic circuit board replacement, and thermostat replacement (which I just replaced just a year ago) they quoted me for $5200 (parts and labor) that’s going to hurt and it will take me a while to come up with that $. Is it still ok to moderately drive my car? it is my daily car anyway. By the way, I have stg 2+ ECU and stg 1 TCU. Any info would help and appreciated. Thank you 🤙🏽
@camcam1676
Жыл бұрын
You didnt video the main harness connector being disconnected. You must do this or the viewers who watch your videos will make the catistrofic mistake of ripping off the main tcm connector. Like I just did today. Bad news for my project. Here is hoping I can find a reasonable solution to a unfortunate circumstance. 😢Cheers
@robertvalencia26
Жыл бұрын
Thank you for sharing this amazing video… I have a Q5 and behaving kind of the same way as you describe…. Salutes from Panama 🇵🇦
@MartinSeipel
Жыл бұрын
Did you solve it?
@mrappstate
3 жыл бұрын
Yet another great video. Also shows me what I've been wondering about my B8 S5 DSG. I hate that you say if you have a B8 DSG that I should sell it. I just bought it! lol. I still love it and when it comes time to change the mechatronic, I have a great video to watch again. Again, great video!
@boostdynamictuning
3 жыл бұрын
No problem lol Not trying to hate on b8's 🤣
@Trag_s
2 жыл бұрын
What a great video mate. Really appreciate your work. You made it look so easy. Feeling motivated to do it myself now.
@boostdynamictuning
2 жыл бұрын
You got this! It was that bad, I thought it was going to be harder than it was. Hardest part is getting the dealership to adapt it.
@tedjohnson64
Жыл бұрын
Really nice video!
@nissasin1
3 жыл бұрын
Great job!!!
@boostdynamictuning
3 жыл бұрын
Thank you my friend!
@BewarHassan-cq1rr
2 ай бұрын
I have an issue with P17E100 gear selector 2 mechanical malfunction after replacing the repair kit any tip or help??
@irizarryomar
3 жыл бұрын
Great video thanks
@boostdynamictuning
3 жыл бұрын
Not a problem! Glad double enjoyed the video 😎
@Danny-sh9ib
2 жыл бұрын
I have an Audi A5 2011 sportback and it’s jerks/pullsback at 5mph when I let go the gas Took it to the mechanic and there’s no code for the transmission. This only happens on 1&2 gear the rest of gears moves normal no slipping. Any answers?
@Danny-sh9ib
2 жыл бұрын
Drove in manual on 1st gear till It reached 5mph and still felt the jerk
@giani_c
Жыл бұрын
Great video! I am about to take my mechatronics unit our to be fixed, can you help me with the repair manual for me to see what measurements i need to set mine up to once i get it back from the shop please?
@MiIlerGD
24 күн бұрын
Question, why would you drop it off at Audi to get it programmed? When you can do this your self in VCDS ?
@boostdynamictuning
24 күн бұрын
@@MiIlerGD you can't adapt immobilizer with vcds.
@theeinsuranceguy
Жыл бұрын
Why not just try the mech pcb board repair kit?
@boostdynamictuning
Жыл бұрын
I don't use PCB board repair kits because I don't want to waste my time with incompetent repair facilities. I've personally seen 6/10 NOT work, and I don't have time to do it twice. Also, going cheap has never done me right when it comes to Audi/VW, but you do you.
@martinlopez5276
Жыл бұрын
Its not worth it
@JSSMORENO9
5 ай бұрын
Great video brother 👍🏼👍🏼 I’m about to work on 2013 S4 took it a transmission shop and I don’t think they knew why they were doing I purchased a used transmission but had to take the mech unit to one of my buddies to clone the new mech unit. My question to you is if I have to measure those white things with the hooks I looked at the original mech units code and it starts with an N24E so I’m a little confused what website can I use to see the measurements
@boostdynamictuning
5 ай бұрын
Glad I could help! I would take measurements that I stayed in the video. Or use measurements from old forks.
@JSSMORENO9
5 ай бұрын
Thank you 🙏🏼
@ericmiller1467
3 жыл бұрын
Is that neutral setting for the gear selectors before mech goes back in?
@boostdynamictuning
3 жыл бұрын
It's for a solenoids to know starting position. It doesn't actually do anything with gear selector it's self.
@hakam575
3 жыл бұрын
Hey man , had my gearbox showing the usual malfunction you may continue driving ... took it to a specialized trans shop and they rebuilt the DSG with a new cluth, TCM and they said they replaced the solenoids on the mech unit . However, the car again starting kind knocking once you lift ur foot at 2nd gear then accelerate again ( low speed ) as well as knock when when decelerating on 2nd to 1st ... a small nodge if get what i mean ...what could it be ... what are the things to replace more than the ones they replaced
@boostdynamictuning
3 жыл бұрын
Are you stock tcu tune? Rebuilding personally isn't the best route. Buy a new mech unit might be your only solution sadly. Plus wriring harness to ensure no issues. Catch it early and you won't have to replace clutches.
@damienharvey6285
2 жыл бұрын
I have a stage 2 tcu tune and mine is starting to do this high up drop gears and ban when slowing jumping forward
@K24-SRT
4 ай бұрын
Where can I obtain the information to find out what the measurement is, either 28 or 32, for my vehicle ? Was planning on doing this job now this week.
@boostdynamictuning
4 ай бұрын
Audi Elsa is the only good info.
@K24-SRT
3 ай бұрын
Faulty code 8056 select level sensor P179F is related to drive position sensor ?
@saabsquad
3 жыл бұрын
Did the car slam or clunk into reverse and drive? Did it have problems shifting? In the process of replacing my mech unit rn. Alsobif I swap my tcu onto new mech will it need to get recoded?
@cardno69
Жыл бұрын
Hey there.awsome info video.i need a little advice,would I need to have the immobiliser adapted if I was to have my old mech unit refurbished and refit it?
@boostdynamictuning
Жыл бұрын
You would not, but I really advise against being rebuilt. I've seen way to many people have a rebuilt not work after fixing it.
@Kfz.9
Жыл бұрын
Ich hätte noch eine Frage nach Einbau der mechatronik öl Befüllung muss mann welche cod neue eingeben. Oder nur Grundeinstellung und kalibrieren mit vcds wil morgen das gleiche arbeit durchführen. Danke im voraus
@alexsterjovki5950
3 жыл бұрын
Great video thx brother
@boostdynamictuning
3 жыл бұрын
No problem! Thanks for watching
@user-qo2lm3su7p
7 ай бұрын
Il faut débrancher la batterie avant le démontage du mecatronic ?
@Gaby2411.
Жыл бұрын
Great video. I wonder if you can help me with an advice for an s tronic box on a q5. I reconditioned the clutch, the mechatronics and made the adaptations. After the operation, the car has a shock from the 3rd gear to the 2nd, and when it is almost stopped, it gives another jerk. Likewise, when I switch from Drive to neutral and accelerate it in neutral, it starts moving forward a little. What should I replace? Thanks!
@boostdynamictuning
Жыл бұрын
I would start with checking fluid level
@Gaby2411.
Жыл бұрын
@@boostdynamictuning this was the first thing that i ve checked. The oil level îs ok.
@wheredahos1164
Жыл бұрын
Why do you have to take it to Audi? I have a 2013 s4 and it won’t go in reverse with a new mech unit is that the problem?
@tylerpadlina943
9 ай бұрын
Did this car have any codes? I'm having a hard time diagnosing my car and so are my local shops and would love some insight! My 2014 dsg has no codes but it has a hesitation starting and after gear changes, 2-1 clunk, it's very inconsistent and reverse often bucks like letting out the clutch too fast in a manual car. Also the power delivery is inconsistent feels like it has turbo lag if that makes sense. All of the sudden you get full power around 3k rpm.
@boostdynamictuning
9 ай бұрын
We didn't have any codes, but it's very common issue on these cars.
@valeriesharrak7091
Жыл бұрын
Hi boss just did a mech swap on a 2018, sent to dealer to get reprogrammed and they called me back saying that I have a parking brake fault so it won’t allow them to do it, Is that what you’re talking about ? Have them keep trying? :) your videos are super helpful so I appreciate you much
@boostdynamictuning
Жыл бұрын
Sadly it wasn't a parking brake error. They're not lying, the ebrake does need to work to adapt trans
@valeriesharrak7091
Жыл бұрын
@@boostdynamictuning what do you think can trigger that, wasn’t on before we removed the mech unit 😟
@colinswinney380
2 жыл бұрын
What year would you recommend an s4 thank you , been looking at b8 and b8.5 come across this common problem on a sales add for one and thought I’d do some research and come across your videos and it’s really put me off them
@IsaakMK7
Жыл бұрын
Did you buy one?
@cheesuschrist1477
22 күн бұрын
How much did the unit cost
@giani_c
Жыл бұрын
Do you have a part number for the hoses?
@Doll_M
Жыл бұрын
Hi recently had my mechatronic changed on my Audi a3, but car still isn’t driving. Parking gear is blinking and transmission isn’t picking up on scanner. Please help
@JRamirez943
10 ай бұрын
I don’t want this same issue could you reply
@JRamirez943
10 ай бұрын
@boostdynamictuning
@Toxikk_
9 ай бұрын
My 2013 s4 is doing the rpm jumping when you come to a stop but doesn’t slip when driving and this morning my trans malfunction came on scanned with obd11 and fault code p179D00 any thought on what this could be?
@boostdynamictuning
9 ай бұрын
Sounds like mech time
@Toxikk_
9 ай бұрын
@@boostdynamictuning better if buying a new One or can i get the rebuild kit ecs or fpc sells?
@boostdynamictuning
9 ай бұрын
@@Toxikk_ new is the only way!! These rebuild kids I've see so many not work
@Thomas-qo3qr
2 жыл бұрын
Can you Do it on Jack stands?
@Kev_Haggard
2 жыл бұрын
My 2013 s4 is immobilizing and throwing a transmission function. After I let it sit for a couple minutes, I can drive again, I'm pretty sure this is why previous owner traded it in. My question is what are odds this fixes my solution and how long is it gonna hold up? Lol you've probably got this question a ton. I'm wondering if the drive selector has anything to do with this.
@boostdynamictuning
2 жыл бұрын
I would start with scanning the codes. You don't want to guess on this repair
@martinlopez5276
Жыл бұрын
I had the same issue. 😢 i had to change the whole Mechatronic. It was pricey😢
@jobhollandDCP
2 жыл бұрын
How long did it actually take to do this? Great job!
@boostdynamictuning
2 жыл бұрын
If I took my time, I would say around 3-5 hours. It wasn't as bad as I thought it was going to be.
@Kfz.9
Жыл бұрын
Super arbeit Respekt schad das sie nicht gezeigt haben wie mann die Grundeinstellung macht ..kann mit vcds die Grundeinstellung machen schöne grüße aus deutschland s❤
@boostdynamictuning
Жыл бұрын
Greetings! We actually made a separate video for the adaptations! Thank you for the feedback! :) kzitem.info/news/bejne/zIeIyHh4f3d8e6g
@Kfz.9
Жыл бұрын
@@boostdynamictuningbitte habe gerade angeschaut super vielen danke ❤
@antoineharden7849
3 жыл бұрын
By any chance do you have the part number for those plastic seals?
@boostdynamictuning
3 жыл бұрын
Should be in the video. Call Audi if you don't see it in the video.
@abahsain
2 жыл бұрын
Hi .. I have Audi 7 2013.. transmission working absolutely fine just I’m getting error Gear is overheating change driving style .. and fault code is P1765 hydraulic sensor 2 adaptation limit reached .. pls advise what could be the actual problem??
@boostdynamictuning
2 жыл бұрын
Either wiring to sensor or actual sensor is faulty. You might get lucky and fix replace sensor and it work. Or you might have a valve body issue. You stated your car is an a7 right?
@abahsain
2 жыл бұрын
@@boostdynamictuning yes… this sensor are not replaceable .. attached with TCU
@boostdynamictuning
2 жыл бұрын
@@abahsain ouch, sorry to hear this. It's not the worst job, but it's going to be pricey.
@BigMotorLover
8 ай бұрын
Same process for a tuned tcu?
@boostdynamictuning
8 ай бұрын
Yes
@tariqmohammed8505
Жыл бұрын
did you replace the mechatronic to a new one just parts
@boostdynamictuning
Жыл бұрын
Brand new from Audi
@tariqmohammed8505
Жыл бұрын
@@boostdynamictuning is the mechtronic a service part or replace parts of original
@boostdynamictuning
Жыл бұрын
@tariq mohammed you can swap parts but I would never do so! Buy a whole new mech unit and be done
@HarpreetSingh-yo9ir
11 ай бұрын
it could be a clutch because clutch was slipping but he straight went for mechatronics unit like he knew what was wrong. if i was there i would have the clutch checked first. not only me but every single mechanic go for clutch first. i don't know after saying that mech unit dosent know when to engage clutch he didnt even bother to do the basic settings on the previous mech unit to see if its the clutch or the mech unit. surprising tech here
@jackweisenburger
8 ай бұрын
How can you check clutch without removing trans?
@normansabel1850
3 жыл бұрын
Why did you need to take it to Audi to code the TCM?
@boostdynamictuning
3 жыл бұрын
New mech unit needs immobilizer adapted. The car won't drive or move after mech replacement. Also only way to keep warranty on mech unit also.
@Gregevo
Жыл бұрын
hello what software did you use to code the mecatronic?
@boostdynamictuning
Жыл бұрын
Odis is the only way Sadly
@Gregevo
Жыл бұрын
@@boostdynamictuning not vcds ?
@boostdynamictuning
Жыл бұрын
@@Gregevo vcds is used for adaption and changing configuration bits, as for programing immobilizer data that is done via ODIS
@Gregevo
Жыл бұрын
@@boostdynamictuning thanks !
@pedrochavez515
2 жыл бұрын
My s4 has these codes can you help me out please a shop near me charged me $300 to tell me the didn’t know what was wrong with it P1624 P2846 P0726
Пікірлер: 95