You are a very good teacher!! Thank you for sharing! I always put a tiny dot of hyper cement glue on my final knot before hiding it in the bead!
@j-hoss8980
Жыл бұрын
Thank you for this tutorial! I have made a few keychains after watching it. Also, I ordered the CCDIY as it is your recommended UV Resin and I love it! It's now my go to. I tried many different resins and never cure easily. The only thing is that I wear a respirator and still get headaches. I switched to doing it outside and has helped a little.
@Stephslashesandboutique
Жыл бұрын
Could u tell me which uv lamp u use please
@ednaalvarado2334
4 ай бұрын
Im following just perfectly. Thank you for explaining it. I love it.
@peachyglittersnob
10 ай бұрын
Omg I literally just selected your video because I needed a refresher on the keychains and then I saw you are actually using PEACHY and its made my day :)
@oliviarobinson5460
2 жыл бұрын
Hi i was wondering if you could inform mw what the silicone mat/tray your using in and out of the lamp ?
@cyndiheinecke5074
Жыл бұрын
These are beautiful and I love your explanations of your process. Great job!!
@amandabaack7063
10 ай бұрын
When you are doing the 3 layers of UV resin on top of the glitter and/or vinyl are the layers of UV you put on thin? These turned out beautiful!
@suzannesola359
Жыл бұрын
Hi from Melbourne , Australia .. love and thankyou for showing us how to make
@rikionYT
Жыл бұрын
Welcome! I'm happy to have you! ❤️
@pink.ivy87
Жыл бұрын
Wow!!! Those are sooo beautiful. You explained everything perfectly. Thanks for the tutorial and the links for supplies. Liked, Subscribed with Notification 🔔 on!
@lopezrosierl27
24 күн бұрын
Amazing ❤
@nancyruiz5164
3 ай бұрын
Beautiful.....you explained it just fine. Thank you for sharing. If you don't mind me asking, how much do you sell them for?
@suzanneharper2881
2 жыл бұрын
Beautiful and I think you explained it well!
@stinsypierre5924
6 ай бұрын
So beautiful ❤
@kimberlyharden6641
Жыл бұрын
These are adorable! I have a question though...at 11:38 in your video, a pinkish/purple & blue tool comes into view on the screen. You didn't show using it in the video, but I'm very curious what it is/where to find it. I believe it's used to help pierce the existing hole on the blank and help clean it/smooth it out. Please let me know...need that tool. Thanks so much!
@sallymoodley1422
Жыл бұрын
Stunning....
@angelabaldwin2045
2 жыл бұрын
those are beautiful - purple is my fav 🙂
@rikionYT
2 жыл бұрын
Thank you so much!! I love me some purple too 😍
@rrane5961
Жыл бұрын
Thank you so much for sharing 😊
@hafsahamir641
Жыл бұрын
i understand purrrfekly... 😍😍😍
@doggo5065
Жыл бұрын
These are beautiful. UV resin is just as harmful and toxic as regular resin / epoxy and you should consider wearing PPE to minimize your risk of harmful effects which can show up at any time after repeated and prolonged exposure.
@nanettehuse8213
Жыл бұрын
Beautiful 😍
@pamelawright4054
10 ай бұрын
OMG!! I love it 😍
@Made_ByPaulaClough
7 ай бұрын
Thank you for sharing
@purpleroseh23
11 ай бұрын
So good
@Stephslashesandboutique
Жыл бұрын
Could u tell me what uv lamp you use I’m on a budget so when if it’s not the one u have which one would u recommend for a good price by uv reason always ends up sticky TIA
@tammyelkins8012
Жыл бұрын
Do you put the vinyl on the opposite side you did glitter on??
@cichris
2 жыл бұрын
Can you put vinyl over the resin and then reseal with resin?
@anquanettagolden9439
Жыл бұрын
Yes you can! As long as the resin is dry 😅
@sophiamunoz9871
Жыл бұрын
Is the resin ok with the heat of being in the car?
@SophiaOleike-je2vp
14 күн бұрын
Can I use eposy resin on this
@irishliwagbuno354
Жыл бұрын
Hi, is the UV resin different from Epoxy? Does this need the hardener?
@rikionYT
Жыл бұрын
Hi!! Yes, UV resin is different from epoxy. It doesn't need a hardener, but it will need a UV light source to cure! You can use a UV nail lamp, a UV flashlight, or even sunlight to cure the UV resin 😊
@rebeccayepez3651
Жыл бұрын
Question: after you glitter you said you put two layers of resin sand it alcohol it and then do a third layer. Do u put it under the light each time or only at the end of the 3rd layer?
@rikionYT
Жыл бұрын
Cure it each time! ❤️
@rebeccayepez3651
Жыл бұрын
TYSM
@jenniferwilliams4398
Жыл бұрын
What grit of sandpaper
@ebunny0297
Жыл бұрын
What is the name of the machine & glue? I’m a beginner at this and I’m trying to create badges for my coworkers.
@iamsunflower-fu3lk
6 ай бұрын
I wasn't adding enough coats of resin no wonder why mine was feeling gritty
@alyssawilda3061
6 ай бұрын
I made one for my sister-in-law and she's stretched it out, where half of the cord is like out now. How can I prevent this? Is there a better elastic cord to use?
@CaitlinPropst
18 күн бұрын
I don’t see why it’d have to be stretchy, maybe could use a heavy duty fishing line as an alternative?
Пікірлер: 47