I was shopping for 6.5 Grendel ammo some months ago. Good stuff hovering between $26~$32 a box. But in the search was Winchester OTM 6.5C ammo at $16 a box in volume. I bought 5 cases. Already had a BCA 308, so I ordered an upper. What a choice trick this has turned out to be! 3/4 MOA with the Winchester. I picked up a couple of boxes of ten other types of match and hunting ammo (still less than or equal to comparable 6.5 Grendel on almost every choice). S&B soft point 159gr is it's weakest point, but that's still just under 1.5 MOA. Remington AccuBond tipped ammo is 1/2 MOA; better than any of the match stuff I tried. Great piece!
@william99Z
Ай бұрын
I have a BCA AR10 in .308 with a 20in barrel. You have to put an adjustable gas block on it. They are way over gassed. That and a good three chamber brake and now it's like a 5.56 kick.
@hdc711
10 ай бұрын
I put this upper on my Aero M5 lower and took it to the range. I was super impressed with the accuracy. Sub MOA groups with Hornady ELD Match. Took it to FBI Sniper/Observer school and everyone had their rifles checked by the armorers with go/no-go gauges on the first day before shooting began and it passed. I noticed it was popping primers early on but kept going. It ended up dying at around 200 rounds on the 4th day of the school. The armorers checked it with the gauges again and it failed. I had to use a loaner rifle (Ruger Precision Rifle) to pass the school. I think these uppers aren't built to stand up to any sort of high round count. If it seems too good to be true it usually is.
@livefreeordie1776
2 ай бұрын
Why did it fail?
@Steelcity77
Жыл бұрын
I have a 556 and a 7.62×39 upper and both run flawlessly.
@DanielleBickes-rt6pg
6 ай бұрын
I have a BCA AR10 side charger 308 and it is not cycling.? Jams on just one round. Was wondering if someone would possibly know why this is.?
@sleepy1419
4 ай бұрын
Gas block isn’t aligned properly I guarantee it
@claybeck5547
9 ай бұрын
I am thinking about building 1 65 creed more.
@robertheywood141
Жыл бұрын
I have this upper coming. I sure hope it works with my PSA Gen3 PA10 lower....
@BradleY97.
Жыл бұрын
Absolutely should I took the risk with the bca 308 upper and pa10 gen 3 lower everything went together perfectly, I used SR25 10 round magazines. Cycles perfect not one malfunction!
@robertheywood141
Жыл бұрын
@@BradleY97. and anyone else interested in a PSA and BCA combo. I tried my PSA Gen3 PA-10 lower with 2 different BCA 6.5 CM Side charging uppers and they would not fit together. With the front pin installed the upper and lower receivers made contact with about 1/16" to go before I could install the rear pin. :( I've seen this comment before so there must be a tollerence issue between them where some work and some don't. Since I tried 2 different BCA Uppers I assume it was the PSA lower that was the issue but that's just a guess. I then ordered a BCA lower and it works great. I'm getting SUB MOA groups at 100 yards. ** I did prefer the feel and trigger of the PSA lower tho :( Wish it would have worked!
@PewpewKev
7 ай бұрын
What suppressor are you using?
@DarlingtonGunWorks
Жыл бұрын
Nice hat...
@Ryan-hw7qb
Жыл бұрын
I want a full top rail…… why does this have and mine not?
@AmmoLandTV
Жыл бұрын
No idea, it's likely an option or some such. Give them a call
@KD-lb9bg
Жыл бұрын
So, a face full of hot brass for left handed shooters. Alrighty then. Very thankful that my AeroPrecision M5E1 is traditional in construction.
@AmmoLandTV
Жыл бұрын
They do make a left-handed version for the same price.
@KD-lb9bg
Жыл бұрын
@@AmmoLandTV Good to know, thanks.
@LTLoudpack7100
Жыл бұрын
I'm sorry you're suffering from left-handedness, I hope you get better soon.
@KD-lb9bg
Жыл бұрын
@@LTLoudpack7100 Lol.
@sinistersilverado965
Жыл бұрын
LOL! you complain about the recoil of a heavy barrel 6.5 Creedmoor?
@AmmoLandTV
Жыл бұрын
Dude, it's the bolt carrier. Something about the way the gun operates, it feels like shooting a lightweight 308
@jangchief
Жыл бұрын
I saw that they have a new lower that actually lines up and matches with their uppers now. Idk why they say they machine/make these but they are obviously mixed-n-matched between handguard, upper, and lower. It's crazy that nothing inthe rifle actually matches! No contour lines match up! And their gas blocks are too big for their mismatched handguard so you can't use the built in qd stud because it will contact the barrel. These bca rifles work great and cost less then anything out there, but they are mismatched / mixed-n-matched assembled parts that absolutely don't aline and have No matching contour lines.
@jangchief
Жыл бұрын
Mix-n-match style assembled parts that absolutely don't line up with No fluid contour lines! Also their cheap barrels/budget feed ramps will Not cycle the high bc 264 bullets like the barnes match burner 145grains with bc of .703 It looks like they don't chamfer the inner barrel enough to pickup/cycle the long pointy bullets. I've called them and had to send back one of these and they suggest a different rifle because they say "you just need to find the right amo this gun likes" BS Long range 6.5 creedmoor rifles should all be able to shoot long range 6.5 creedmoor ammo! But apparently that's not the case here
@johnnyringo35
9 ай бұрын
Weird....I've put 1700 rounds of (name the ammo) different brand 6.5cm and only had 9 failures. I have a BC10 6.5cm with stainless steel barrel 20 inch. Also a BC10 .308 parkerized 18 inch barrel shot roughly 800 rounds. This one I did have to do some minor polishing but it's been fine since. As in no failures.... For the price they're fun. I own just under 20 rifles and over 25 hand guns. Some are top dollar and rare but I bought this two for family members to use on my 200 acre compound/farm when shtf.
Пікірлер: 26