Came here to learn some tween tips, got my mind blown by a quick comment about Essential Properties. Thank you for succinctly speeding my workflow with every video, Jake!
@mamanche
3 ай бұрын
That's the beauty of Jake's videos: You come expecting to learn about X thing and along the way you learn a dozen or two new more things!
@thestellarelite
3 ай бұрын
Yeah I'm still watching but I'm checking that one out right after I feel like I've been sleeping on some really big and obvious 😅
@themysteriousunknownrevealed
3 ай бұрын
Not all heroes wear capes. Not all heroes are buttery smoove.
@asquareportal
3 ай бұрын
Been a Motion Designer for 10 years and still got excited seeing the thumbnail. Thanks Jake, you inspired me to give back to the community and so much more. With you on the ride, keep going!
@gregkrazanski
3 ай бұрын
i like the idea of stacking eases. sometimes you have to use more than 2 keyframes to get the motion you want, but it can be a huge hassle to adjust the values after the fact, especially if the dimensions aren't separated. I've honestly found DuIK's interpolator tool to be totally invaluable to my workflow. it produces amazing looking eases that are not possible with 2 keyframes, and has so many keyframeable parameters, making it really flexible
@amandaradtke
3 ай бұрын
I learned the extra keyframe easing technique in a School of Motion course, and it's totally upgraded my animations. I could never figure out how people were getting such smooth easing! Haha. I've never thought of using a slider control - I'm sure that will come in handy! Excited for the rest of this series!
@pietr001
Ай бұрын
Do you remember which som course this was?
@JakeInMotion
Ай бұрын
@pietr001 it was Advanced Motion Methods.
@brynocerouss
3 ай бұрын
Bless you for this series! (and your videos in general, both on KZitem and elsewhere). I jumped into motion graphic design with near-zero experience and no formal training at all, so a workflow is something I haven't learned. Tutorials like this were an invaluable part of who I am today as a designer and continue to be helpful to refine skills :)
@indy4s
3 ай бұрын
Never turned the post expression graph on until today. Now I'm never turning it back off
@andres.am.
3 ай бұрын
Thank you very much for sharing in this way all those decades of experiences using the program.
@tombradshaw1905
3 ай бұрын
Great tip. I'd been using a Null to get that kind of longer ease in effect.
@JakeInMotion
3 ай бұрын
That's another great way to do it!
@KidIndia
3 ай бұрын
My man gives us the special AE sauce all the time 🔥!
@bharat5194
3 ай бұрын
Really useful! Thanks Jake
@chaosbreaker8737
3 ай бұрын
Very interesting! I've not come across this technique in 5 years of my career ! Thanks Jake, 🙂
@difevfx3275
3 ай бұрын
I can't say how much I appreciate your channel man. Thanks
@AGAROHAMEDIT
6 күн бұрын
good video need to work on this absoulety
@maesmaakt
3 ай бұрын
Love the video Jake, short and very clear!
@GroundUnderMedia
2 ай бұрын
You are a wizard, Jarry
@secondhdra
3 ай бұрын
so hyped for this series!
@leftclot
3 ай бұрын
First, he covered tools, no he covets skills. Modern day hero.
@Oldyellowbrick
3 ай бұрын
I’ve been doing this for years but by stacking nulls instead of sliders, interesting alternative method!
@jeraldferriol5840
3 ай бұрын
Thank you, Jake!
@MrLionelrichtea
3 ай бұрын
Actually really helpful vid, as a noob I've had issues with the g editor
@yohannesJas
3 ай бұрын
the pendulum got me real good
@themuckyman
3 ай бұрын
You made my head hurt (again) Jake ! 👍
@TheSancheztomas
3 ай бұрын
loved the video. keep em comin!
@AndrewMarston
3 ай бұрын
Great practical tips.
@Poliiyi
3 ай бұрын
Awesome tutorial! Could you please talk about Essential graphics? Is it easier to animate that way instead of shape layers?
@JakeInMotion
3 ай бұрын
Essential properties allow you to basically make "smart" precomps that give you access to select properties within them. So in my example I added size, color, texture offset and contrast controls. With each instance of that precomp I could modify those properties independently of every other instance.
@verygoodfreelancer
3 ай бұрын
i’ve always just used Flow for everything (you can download REALLY nice bespoke presets for it from aescripts beyond just expo in and expo out) and if you need more than what 2 key frames can give you, just parent nulls and add layers of animation that way! nice braindead method
@TashMV
3 ай бұрын
Same concept as trying to make a perfect circle with 2 vector points
@JakeInMotion
3 ай бұрын
It can be done!
@vishfactz6007
2 ай бұрын
And here my brain just died 💀
@bojacksimpson8624
3 ай бұрын
thanks!
@JacobdelaRosa
3 ай бұрын
That is so clever
@jz1244
3 ай бұрын
👏👏🔥
@Hix066
3 ай бұрын
More great content @jakeinmotion Was the genius vocal you through your pocket operator?
@JakeInMotion
3 ай бұрын
Yes it was!
@Hix066
3 ай бұрын
@@JakeInMotion haha I thought it sounded like your voice but sampled and played with. They're great little things. I just need to get better at AE (and pull my finger out on LIAE) and learn how to use it to compliment my animations. No more searching for music
@how2ae
3 ай бұрын
Lets face the truth: essentials is a weird thing that mimics nodes. Did you know AE have nodes for decades? It’s there (comp chart), but didn’t develope properly
@mesatokun
3 ай бұрын
see Jake - give a like !
@heidypozos5023
3 ай бұрын
Eres lo máximo
@JakeInMotion
3 ай бұрын
Gracias 🙏
@ARISEMYPEOPLE
3 ай бұрын
r u using nlp on me jaky boy
@lettertosohan
3 ай бұрын
where is this essential properties? I am using AE2024, I dont have it!
@JakeInMotion
3 ай бұрын
You add them through the essential graphics panel. I'm going to make a video about it.
@MasterFreak2
3 ай бұрын
Essentials propieties tutorial?
@JakeInMotion
3 ай бұрын
It's on the way!
@qlmi
3 ай бұрын
i need youyorial about how to make like your intro
@sergiomiranda8857
3 ай бұрын
how come does yellow handles don't show up for me?
@JakeInMotion
3 ай бұрын
In the graph editor? Make sure you have the keyframes selected, they're still selected when you're in the graph editor and you're viewing the correct graph type for what you're expecting to see.
@sergiomiranda8857
3 ай бұрын
@@JakeInMotion yeah the graph editor. Actually from your other video I ended finding out I needed separate the dimensions of the position to be able to use the handles. Thanks for all your videos and replying to me :)
@k6sra
3 ай бұрын
omg, dose the slider work like a null but with the advantage of having the ancher point follow along the motion?
@JakeInMotion
3 ай бұрын
Sort of. It's going to add to whichever axis you've applied it to (X or Y position).
@k6sra
3 ай бұрын
@@JakeInMotion what about scale & rotation? is there anyways to do the same for them?
@JakeInMotion
3 ай бұрын
Yes absolutely! You can use the Angle Control effect and tie the rotation to it just like I did with the position and a slider. And you can use a Slider for the X & Y scale individually, or proportionately.
@k6sra
3 ай бұрын
@@JakeInMotion wow! Thanks man💛
@deekshiths90890
3 ай бұрын
its not same on scale parameter please help
@JakeInMotion
3 ай бұрын
For uniform scale influenced by a slider you would write "transform.scale + slider", but instead of writing the word slider, you would need to pick whip the slider control
@deekshiths90890
3 ай бұрын
@@JakeInMotion awesome, thanks :)
@Dj.Mix_01
3 ай бұрын
How u zoom expressions? :D
@JakeInMotion
3 ай бұрын
Ctrl + Mouse wheel scroll 👍
@chaosbreaker8737
3 ай бұрын
@@JakeInMotion Another crazy tip😂 I thought that was done in post
@mattm7426
3 ай бұрын
How do you guys know all this stuff lol. I felt so dumb watching this 😂
@JakeInMotion
3 ай бұрын
Now you're becoming a genius.
@mattm7426
3 ай бұрын
@@JakeInMotion thanks to you 😎🙏
@tanveerahmad2865
3 ай бұрын
I'm noob here, i want to know how the hell he duplicate and moved whole cirlce with those position keyframes 😢 whenever i duplicate and move a shape, it create the new keyframes at current time and rest of other keyframes remains same as before.... what am i missing??? 🥹
@JakeInMotion
3 ай бұрын
So I had the x and y positions separated into their own properties. You can do this by right clicking the position property and choosing Separate Dimensions. Since my circle only had y positions keyframes, adjusting the x position didn't affect those y position keyframes. But you can still preserve position keyframes while adjusting them all at once! Select all the keyframes you want to change, make sure your playhead is aligned to one of them, and then click and drag one of the position property values. They'll all be adjusted at the same time.
@tanveerahmad2865
3 ай бұрын
@@JakeInMotion Thank you very much jake. I didn't notice those seperated properties, my bad. and thanks for the extra tip too. So helpful. 🙏
Пікірлер: 72