Never heat the vinyl close to the area where it is glued to the panel, keep a distance of at least 10cm and heat from there. In this way glue lines and stretch lines are avoided
@AllenCars
10 ай бұрын
True true
@memyselfandiuntildeath1911
Жыл бұрын
THANK YOU! HOLY SHIT! SOMEONE ELSE GETS IT!
@AllenCars
Жыл бұрын
Thanks we will have more tips today at 5pm
@CHB_98
9 ай бұрын
thanks finally someone who doesn’t show off and actually explains how to
@AllenCars
9 ай бұрын
All we are here to do is help
@CHB_98
9 ай бұрын
@@AllenCars i wanna wrap a abs plastic bumper i have sanded it and primed what is also needed before wrapping ? tis
@AllenCars
9 ай бұрын
@@CHB_98 wipe it down with alcohol and put some Primer 94 then wrap it
@CHB_98
9 ай бұрын
@@AllenCars thank you would you know if there is an equivalent to that in toronto canada ?
@matt7iron
29 күн бұрын
😮 why is this better than a paint job
@patrickspapens5497
9 ай бұрын
Will be doing my first wrapping soon, good to see these short clips that get straight to the point
@keydz1173
7 ай бұрын
How is it
@patrickspapens5497
7 ай бұрын
@@keydz1173 not too bad. Wanted to do the spoiler on my helmet. Thought i could do it with one piece but needed to do it in three separate pieces. The one piece wrap looked ugly on corners but stayed in place quite well. The multi piece wrap is better and doesn't peel on the corners. Heat gun is recommended. It's a cheap foil for the first time though
@AllenCars
6 ай бұрын
glad everything went well. what did you struggle with? www.allencar.net
@richardhernandez2081
3 ай бұрын
“Glass it out” is what we say at work. Makes it so much easier to work with
@AllenCars
2 ай бұрын
we say the same thing but to the new wrappers may not understand the terminology. www.allencars.net
@TRUMP4LIFE1359
Ай бұрын
I'm sure anyone that has some kind of knowledge of doing cosmetic or different things to a car for looks can do anything like this but when it comes to corners and things like that that's where I believe a short would come in handy to learn how to wrap around corners
@kenthirakoune3907
5 ай бұрын
Finally someone that knows what they’re doing!
@AllenCars
5 ай бұрын
Thanks we really appreciate it
@jimshackelford_icu812
4 күн бұрын
Stupid question my wrap came with a plastic layer on the shiny side. Do you remove that before heating up or once you’re completely done and have it all squeegee out?
@sneakerbay1836
2 ай бұрын
Thinking about taking the leap & getting my certification
@AllenCars
2 ай бұрын
Go ahead
@deafrainbowboy75
9 ай бұрын
Thank you ❤❤❤❤❤!!!
@AllenCars
6 ай бұрын
glad this helps. www.allencar.net
@BlackSheepBino
3 ай бұрын
I thought doing tint I could do a wrap definitely humbled me but I got it done thanks to videos like this
@AllenCars
3 ай бұрын
If you want to be more efficient you should join our KZitem membership for car wrap videos that are more in depth
@mdr1396
2 ай бұрын
Thaaaank you. Finally someone who gets right to the point and actually shows what they're explaining. 👏🏻👏🏻👏🏻
@AllenCars
2 ай бұрын
THANKS How Long Have You Been Wrapping
@mdr1396
2 ай бұрын
@AllenCars I actually just started a few days ago, I'm wrapping my Harley, and being the noob that I am, I've been making it harder than it needs to be and this video is exactly something i was struggling with!
@maathejayandyjohns1343
26 күн бұрын
Say brother can you use a hair dryer instead of heat gun?
@thesymphoniclife
6 ай бұрын
I remember my Cat growing up. Orange cat, we named him squeegee
@AllenCars
6 ай бұрын
Oookkkk
@jamesmcclellan6235
Жыл бұрын
Will a wrap work on flat black paint I mean will it adhere to the body or the paint
@AllenCars
Жыл бұрын
The vinyl will not stick as well as you think
@chupappi626
2 ай бұрын
And don't forget to have a blessed day.. But say like that 150 buks guy.. Go with the trend my dude
@MrNimNims
Жыл бұрын
Question: just say that you were laying out just one piece of wrap (let’s say that blue piece in the centre of your hood as a feature) once you have laid it down, should you then add a small amount of heat to make the adhesive stick more or just leave it as is? TIA.
@AllenCars
Жыл бұрын
Depends on the vinyl but Ideally yes
@calebandres6374
Ай бұрын
Hmm I stretch mine out to glass it and it tears almost every time… is wrapping a car done with tons of small pieces?
@fraxure6121
15 күн бұрын
You probably have cheaper material
@Matt_Avocado
4 ай бұрын
soothing ass voice
@AllenCars
3 ай бұрын
YEAAA BUDDY
@allenncrystalking8517
2 ай бұрын
My names allen and id love to learn how to wrap a car
@Ls400Saint
9 ай бұрын
What tools do u recommend, I kno the basic ones but is there any special tool that’ll help a lot or anything, gon be wrapping my car soon satin black
@AllenCars
6 ай бұрын
Here's a full tools and equipment list. docs.google.com/document/d/1v2AqnS58EY7RUguCaHT07nwFzCVwmu8EZd1wS_1ezlo/edit?usp=drivesdk
@diegov7122
5 ай бұрын
@@AllenCarsdont work?
@AllenCars
5 ай бұрын
@@diegov7122 works every time
@terry370069
8 ай бұрын
I'm in California i love to join your class
@AllenCars
6 ай бұрын
We are trying to have a class in Cali this summer. Www.allencars.net
@TonyFeliciano-kq5ms
3 ай бұрын
Hi i will like to wrap the roof on a 2018 Honda accord
@AllenCars
3 ай бұрын
Did you want us to teach you or did you want us to wrap it
@skylover4916
4 ай бұрын
My question is what to do when ghe wrap or that side sticker comes out
@AllenCars
4 ай бұрын
I'm not understanding what you are asking
@Babygirlvaal
2 ай бұрын
Where do you buy your vinyl wrap and heat gun?
@AllenCars
2 ай бұрын
would you like for us to send you the link
@CrunchDramaNetwork
9 ай бұрын
Can I heat with a regular blow dryers?
@AllenCars
7 ай бұрын
no no no no
@Jojofrmda9
6 ай бұрын
Do you need a heat gun to wrap will it work without one
@AllenCars
6 ай бұрын
You will need a heat gun
@vtwin1979
Ай бұрын
Will this technique work on my partners face?
@sachinsachi1989
6 ай бұрын
Which company wrapp sticker is using?
@AllenCars
6 ай бұрын
3m
@thomasmeyers5165
4 ай бұрын
I have a question. My hood has rain channels in it. Not very deep but they spread across the hood. How can I wrap this area of the car
@AllenCars
4 ай бұрын
What's the year make and model of your vehicle
@thomasmeyers5165
4 ай бұрын
it is a 2005 chrysler crossfire Limited. the channels on this hood are awkward. since only chrysler seems to have cars with this type of detail. and it looks like a particularly challenging area. idk if lift and pull is the move or if we should glass, post heat, and work the groovesthat way @@AllenCars
@Sixam_Adan
8 ай бұрын
That’s actually bad tension, once you cut and tuck if it heats specially on hood, it will start peeling because you’re forcing it to hug the edges. Pulling and stretching helps but it also makes wrap peel up fast on the long run
@AllenCars
6 ай бұрын
The amount of tension was less than 3% for this video . Anything over 10% will peel back. Nice try
@jeaneebullock2412
7 күн бұрын
SIck❤
@adolg4049
Ай бұрын
Can i wrap with a hair dryer ??
@christopherhernandez6197
28 күн бұрын
Yes it’s possible 😊
@WhoomanBeing
11 ай бұрын
Can you tell me a European store that sells good quality equipment and gear.
@AllenCars
11 ай бұрын
Honestly I wouldn't know because we are in the us
@santos275
9 ай бұрын
Yeah USA is better than Europe🤒🤒🤒🤒
@DaylnD
3 ай бұрын
Small pieces like this are easy, and it’s not a piece that can be put on the car. The pieces people are putting on cars and trucks are a lot bigger and a lot harder to work with. I thought I could wrap my truck with vinyl wrap but watching one of these videos and I was wrong lol
@AllenCars
3 ай бұрын
Thus the reason why we suggest you coming to our wrap class www.allencars.net
@ilseidsert6070
6 ай бұрын
I can just do it with a hair dryer?
@gracemiller7510
6 ай бұрын
God loves you!!! Stay safe!!!! ✝️💜✝️💜 don’t forget to thank Him for the day!!! I hope you get everything you want and more!!!! Stay blessed!!! ✝️😇💜🙏🏽
@AllenCars
6 ай бұрын
All the time
@natively278
27 күн бұрын
💯 Read your wrinkles
@kavellthagod7753
8 ай бұрын
How l join the class
@AllenCars
8 ай бұрын
Click the link. Www.allencars.net/workshop
@JunliuTPU3177FILM
2 ай бұрын
Color change film PPF transparent car clothing manufacturers need to chat privately
@AllenCars
2 ай бұрын
www.allencars.net
@TruCunt
10 ай бұрын
What states do you actually do classes
@AllenCars
10 ай бұрын
Florida, Illinois, North Carolina, Georgia Louisiana etc
@TruCunt
10 ай бұрын
@@AllenCars oh damn I’m looking for the upper east coast thanks though the pa, nj, ny area
@AllenCars
10 ай бұрын
@@TruCunt ok let us know if your don't find anything your way. www.allencars.net/challenge-page/3877d432-7e60-4ade-84f2-c95939da2b39
@TruCunt
10 ай бұрын
@@AllenCars do you service those areas as well?
@nickreed55
3 ай бұрын
Watched many wrapping videos, Tried wrapping my crv myself... pissed off the whole time, took 3 hours to wrap the hatch, just pay someone to do it otherwise you'll waste all your vinyl. I promise.
@AllenCars
3 ай бұрын
Or toy can take our class so we can teach you the correct techniques. Www.allencars.net
@lacrayfrancis8030
8 ай бұрын
Where the class info
@AllenCars
6 ай бұрын
Www.allencars.net
@Elitegs155
8 ай бұрын
You should never heat on a flat panel like that, absolutely ridiculous
@AllenCars
6 ай бұрын
If you only knew what you was talking about
@Elitegs155
6 ай бұрын
@@AllenCars been wrapping for over a decade you muppet…. You don’t heat on a flat panel like that, laying it on properly and tension is enough, I can wrap a whole bonnet without using heat until I have to seal the edges. If you want me to prove it and put you in your place and teach you I’ll make a video of it
@claragrayer5362
6 ай бұрын
I wish I could afford this!
@AllenCars
6 ай бұрын
Join our 1 day in person class or our online class. Www.allencars.net
Пікірлер: 102