Thank you everyone for checking out this video. The next one is already in the works, please stay tuned. It's going to be a bit different from this one. More cinematic, but still with a pinch of educational tips on Gunpla modelling. See you in the next video y'all :)
@DockZock
3 жыл бұрын
A fellow German building gunpla, I am onboard for the ride!
@GiantRobolove
3 жыл бұрын
Hey Kazkaron, willkommen an Bord :) Auf einen regen Austausch. Was baust du gerade?
@goldexperiencerequiem1085
3 жыл бұрын
criminal that you have 230 subs with this quality of content. Keep it up!
@GiantRobolove
3 жыл бұрын
Why thank you! As long as there are people like you acknowledging the content, I'm happy. Everything else will follow. It's a marathon and a fun on at that. Thanks for taking your time to comment.
@seansnyder7744
Жыл бұрын
I learned the hard way (twice) that light pressure is a MUST when scribing. Finally spent the extra money and got SAB scribing chisels, highly recommend!
@GiantRobolove
Жыл бұрын
Same here, I also got my hands on SAB scribers a while ago. I actually mendtioned them in my newest video and used them to scribe custom panel lines for a MG Unicorn. I'm planning on getting more sizes. Do you use them with the holder or without?
@seansnyder7744
Жыл бұрын
@@GiantRobolove I actually just use them bare metal, but I might actually heat shrink the included tubing on to give it a try. I haven't really experienced any clumsy moments or slips that I can think of. I think I bought the .15 and a 1.0 for starters. What sizes do you have?
@GiantRobolove
Жыл бұрын
I have the 0.15, 0.3 and 1.0mm. I'd like to own a 0.2 and 0.5 as well.
@mgrollins
Жыл бұрын
Thank you!
@GiantRobolove
Жыл бұрын
No, thank you for watching!
@_ian2800
3 жыл бұрын
Great video! Please keep making them. I'm new to Gundam customization and this was extremely informative.
@GiantRobolove
3 жыл бұрын
Hi, thank you for those kind words. That is very encouraging. There will be more, I'll see you in the next one!
@anhaotcg
2 жыл бұрын
Nice guide 👍
@GiantRobolove
2 жыл бұрын
Thanks a lot. Good luck with your kit :)
@studentofthepla
Жыл бұрын
your vids are always full of info & as i said before you are funny 🙂
@TheNazmi98
3 жыл бұрын
Thank you for the tips & video recommendations. Looking forward for your future contents. Love & support from Malaysia 🇲🇾 😎
@GiantRobolove
3 жыл бұрын
Thank you so much for that nice comment. Happy to have you on board. Please, look forward to the next video :)
@Chronos33
3 жыл бұрын
Lovely music combined with your path of gunpla learning! Saw the thumbnail in my feed and thought: " Oh cool a new vid, gotta check it out asap!" only to realize it is yours truly! Keep it up! Love the content!
@GiantRobolove
3 жыл бұрын
Thank you. It's getting serious from this point on :D
@danishfahmi1239
3 жыл бұрын
This video is so underated
@GiantRobolove
3 жыл бұрын
Glad you enjoyed it 😃
@darkcrab
3 жыл бұрын
Hahahaha that intro.
@GiantRobolove
3 жыл бұрын
Idk what you mean 😅
@1996starter
3 жыл бұрын
U inspired me to finally scribbing my emtry grade since i dont have proper tools here i tried using home supplies but made lines too wide and rough thanks in future i know what to avoid
@GiantRobolove
3 жыл бұрын
Hey Anurag, that's awesome! I'm glad I could be of help. Let me know how it goes for you when you try it on your next kit :)
@1996starter
3 жыл бұрын
@@GiantRobolove i do have some picture where do i share to send u? Actually the chest and shoulder parts didnt went symmetrical i now know dymo tape or scribing tape is the way 2 go
@GiantRobolove
3 жыл бұрын
Do you have Instagram? You can send me message there if you want. You can find me here instagram.com/giantrobolove/
@1996starter
3 жыл бұрын
@@GiantRobolove ok u got a new follower and a message
@monadamus42
3 жыл бұрын
Very cool video, thank you!
@GiantRobolove
3 жыл бұрын
Right back at you, thank you for watching!
@adrianfurlow5498
2 жыл бұрын
awesome video man, keep it up! I will say i actually was curious to see how someone would completely blind
@GiantRobolove
2 жыл бұрын
Thanks for your comment Adrian. It was definitely a great experience. Have you tried it?
@derek9218
3 жыл бұрын
You had me at "janel" Subbed
@GiantRobolove
3 жыл бұрын
😂 Lol thx my man. I'll see you in the next video.
@andersdenkend
2 жыл бұрын
Nice video. I personally like the "hook type" engraving thingies more, but to each his own. Important is quide tape. I bought some from Dspiae which even comes with a mm scale on it. It's also transparent. Very cool!
@GiantRobolove
2 жыл бұрын
I think it's funny that you watch the content backwards. I learned so much ever since that video. The dymotape was so hard to work with. Happy that I have transparent ones now. I bet the Dspiae one is also very hand with its mm scale. Regarding the hook type: I somewhat associate this type of chisel with aircraft/sci-fi modelers. I think Plasmo also uses them if I'm not mistaken.
@andersdenkend
2 жыл бұрын
@@GiantRobolove I am not sure if there is a specific application for these things, I just noticed that the chisel type I bought, didn't really scribe a nice and even line. It looked rather messy. Was also a Border Model one, iirc. Yeah, I just randomly watch the videos however I can and whenever I have the time. Don't worry, if I see a very old one, it's clear to me that you probably have improved by now. :D
@brian728
3 жыл бұрын
Fun channel, I hope to see more fun gunpla videos in the future! I'm now subscribed so get on it! 🥰
@GiantRobolove
3 жыл бұрын
Hi Brian, thank you for the kind words. I'm currently working on a video showcasing panel lining and weathering on the RG Char's Z'Gok. Please look forward to that one :)
@gunplafan158
Жыл бұрын
Ravi pla uses a plastic epoxy called green stuff I believe
@GiantRobolove
Жыл бұрын
That's the two part epoxy right? I might check it out. Thanks for the hint.
@gunplafan158
Жыл бұрын
@@GiantRobolove it is yea but I just double checked the video of his where he made the backpack for his sazabi and he used a similar product called magic sculpt
@BinaGunpla
3 жыл бұрын
Nice video! I am about to start learning on how to do the panel line scribing. Thank you for the tips
@GiantRobolove
3 жыл бұрын
Thanks a bunch. Happy that you found something to take away from the video. Good luck with your scribing!
@RAZORXTBUILD
3 жыл бұрын
cool video
@GiantRobolove
3 жыл бұрын
Thanks a bunch!
@TennoFox897
Жыл бұрын
Is there a way to do scribing without any of the specialized tools, using just a hobby knife? I cannot afford to buy the tools.
@GiantRobolove
Жыл бұрын
Actually there is. Check out Peco's Modelling channel. He does scribing with a hobby knife, it's insane. kzitem.info/rock/bE-1UrPeNjzJJIdywAqsNw
@noblord8643
Жыл бұрын
Masking tape would work..
@GiantRobolove
Жыл бұрын
I can't remember if I mentioned this. But yeah, I guess it would.
Пікірлер: 51