Short video of what mistakes I made and what problems I encountered while building my homemade cnc router so hopefully you can learn from my mistakes.
for my cnc i use the following things:
17mm plywood
20mm supported rails and SBR16 bearings on x-axis
16mm unsupported on y-axis and z-axis with SC16 bearings
12x2 leadscrew on x and y axis with 1:2 gear ratio (t2.5 gears 10teeth and 20 teeth)
t2.5 belt drive on z axis
nema 23 motors and TB6560 drivers
arduino uno with grbl 1.1
Негізгі бет Тәжірибелік нұсқаулар және стиль Beginner Mistakes I Made Making My CNC Router
Пікірлер: 5