Walk through all the basic steps to design and make a raised, slotted spoilboard. I use the FoxAlien CL-6560 in this example but the process can apply to any machine.
Spetool 1 1/4 surfacing bit - amzn.to/3OZnqnD
Spetool 1in surfacing bit - amzn.to/3syRi2J
Spetool beginners bit set - amzn.to/45F19Th
Other surfacing bit - amzn.to/3BxDAzp
1/4 Collet insert - amzn.to/3JnEL6x
Blue tape - amzn.to/3Z0GKW9
Starbond with 10% off, code is Jamesdean10
www.starbond.com/?rfsn=528921...
FoxAlien CL6560
www.foxalien.com/en-gb/produc...
Tramming jig
www.thingiverse.com/thing:556...
00:00 Introduction
01:20 Sizing the spoilboard
03:08 marking up you board
05:06 preparing to hold the board down
08:19 fixing the board down
11:02 Designing the board (in Carveco Maker)
20:28 cutting the slots
23:04 Surfacing the spoilboard
25:45 Tramming the spindle
If you want to become a patron for one to one help, early video access and quarterly giveaways then head to / jamesdeandesigns
If you want to help the channel but do not want to become a Patreon, you can contribute directly:
www.paypal.me/jamesdeandesigns
Негізгі бет Beginners guide to designing and making a spoilboard for you CNC
Пікірлер: 24