I always watch your vídeos when i need to relax and remember all the basics Jim! Always fun to watch! 🙂👍
@cjstein2000
Жыл бұрын
Thanks
@OzScalemodeling
3 жыл бұрын
Looking good. I am slowing getting tempted to try a wood ship model, Looking forward to part 3 👍
@ModelkitStuff
3 жыл бұрын
Do It. if you want some advice on a kit shout out
@ModelkitStuff
3 жыл бұрын
nicely done, the lego is a good tip, I have used them in the past but my daughter found me out and took the block back 😂
@roncalverley
3 жыл бұрын
Hi Jim, 00:26 Impressive! 👍 11:56 What a clever idea that Lego block square. 👍 12:19 Now where have I heard that before. 😁 See you in Part 3 👍
@avo2466
2 жыл бұрын
It’s a helpful video but centering the work being done in the middle of the screen would be better instead of the upper tight corner. Still you will learn a lot from this video series. Thanks Jim!
@OneLovePsych
2 жыл бұрын
I’m getting ready to start building The Black Pearl, so glad I found your vids they’re very informative.
@cjstein2000
2 жыл бұрын
You're addicted now, no more free time ,😊
@petermerz2704
2 жыл бұрын
Coming along nicely! Watching the next video! Happy days and model on! 😎
@davestrains6816
3 жыл бұрын
Nice tip on the legos. Thanks for sharing. Dave
@glideking
2 жыл бұрын
I learned a lot from this one too.
@cjstein2000
2 жыл бұрын
Thanks
@robertmahiques6218
2 жыл бұрын
I've done a few model cars and plenty of wargame pieces but a good friend just commissioned me to build a ship he's had sitting in his attic. I'm nervous but excited to start, thanks for the tips and advices!
@cjstein2000
2 жыл бұрын
Welcome aboard
@MGB-learning
2 жыл бұрын
Outstanding video and presentation.
@cjstein2000
2 жыл бұрын
Thanks
@wingitprod
2 жыл бұрын
Exactly what I was looking for. Thanks for posting.
@cjstein2000
2 жыл бұрын
Thanks hoping to get back into the build soon as I haven't been in the best of health
@MrSovanmishra4
2 жыл бұрын
@@cjstein2000 getmekitsformodelship
@cjstein2000
2 жыл бұрын
@@MrSovanmishra4 what are you wanting?
@wildsau1965
2 жыл бұрын
that lego is a great tip , ill definately be using it on my next ship
@AethicGlassworks
2 жыл бұрын
Since you mentioned your square getting rusty, one thing I found for rusty tools is to coat them in a mixture of boiled linseed and beeswax. Heat the beeswax but don't burn it (if I remember correctly, it was about ~70C), then mix 1:1:1 with boiled linseed and mineral spirits (or artists solvent). Supposedly the solvent helps mix the two together. Should be lightly heated together (just not directly on a flame; use a warm water bath as a buffer and do it outdoors cus it's flammable). Once it's mixed, it can be used to lightly coat the tool. Wipe off excess. Allow to dry for a couple days without touching. Coating should last a good long while. I did this in a video on my channel, "glassblowing jack restoration", if you'd like to see the process. It's kinda buried though. Most of the video is sanding and prepping the tool itself, then a whole lot of fiddling with filtering some old beeswax. I ought to do a quick how-to for making it, because it's a lot more simple than it sounds. The tool itself has been hanging outside for 2 years now and doesn't have a spot of rust on it (whereas without the coating, they'd rust within a couple days). In short: 50ml melted beeswax (~70C), 50ml boiled linseed, 50ml mineral spirits/artists solvent. Mix in clean container (small metal paint can) while warming in a water bath (~70C). Apply to clean tool (remove rust beforehand), wipe excess, allow to dry for 2 days. Forms an excellent vapor barrier. Thanks for the tutorials! Been interested in picking this up as a hobby and it's nice to see the whole process.
@cjstein2000
2 жыл бұрын
Thanks for the suggestion.
@ukdave57
3 жыл бұрын
Going to have to carry out a clandestine raid on my granddaughters lego box.😄
@lindsaythompson726
3 жыл бұрын
You have tons of patience.
@cjstein2000
3 жыл бұрын
Nothing much else to do during the lockdown.
@eliezer.salvador
2 жыл бұрын
Brasil 🇧🇷 here
@cjstein2000
2 жыл бұрын
Nice to meet friends all over the world.
@ladygardener100
4 ай бұрын
Cut the muzak please
@johncarey3178
7 ай бұрын
Please adjust camera so we may see what you are doing.
@chrisgilevski8317
2 ай бұрын
I think I went into a coma listening to you . OMG your poor wife ! O yeah never mind !
@lynnohman3263
3 жыл бұрын
Like the video. but hard to see what your doing. For some reason your hand and area working on is in top right corner not centered. Cant see half of whats happening in this video.
@cjstein2000
3 жыл бұрын
Working on it Lynn it’s a new camera and new editing software. Thanks for the heads up, I don’t mind when my videos are critiqued, I’m still learning.
@Fishcentral
Жыл бұрын
I'm making my own model from scratch,so I'm searching the Internet and taking ideas from everyone I see, is there a way to waterproof these things? just wondering 💭 Great channel! I subscribed 😊
@cjstein2000
Жыл бұрын
Fiberglass is the only method I know.
@jipleyYT
Жыл бұрын
Bootslack / yacht vernis will waterproof the whole ship ,if you want it to float then, from the inside of hull you'll need to fill any space between the planks with a mix of white glue and sawdust, so no water can enter in there.
@jerryc8963
3 жыл бұрын
Nice video, done lots of plastic models and have been wanting to try a wooden ship. Is this a good starter kit or is there better recommendation?
@cjstein2000
3 жыл бұрын
This is a good starter kit, about $15us compared with hundreds of dollars for top quality kits. The kit has many short comings which I will address as the series progresses.
@fupzp
3 ай бұрын
Where can I buy this ship?
@sharonshively9598
Жыл бұрын
Where do you buy your wood models?
@cjstein2000
Жыл бұрын
Online AliExpress, Lazada and Amazon
@jaykhan3720
2 жыл бұрын
Jim sir.. Can you Share pdf plan drawing of this? Plz
@cjstein2000
2 жыл бұрын
The drawings that are included with the kit are very basic 2 sheets of Assembly instructions only, no information on the lines and structure. If you are still interested send me your email details and I will copy them for you. Where are you based?
@KlingonCaptain
Ай бұрын
Only $15?! 🤯 Sure, it looks a LOT more flimsy than a Billing Boats model, and is probably a thousand times more frustrating, but I bet you can't tell the difference when it's finished. 🤔
@breezly1015
Жыл бұрын
You may want to make sure your actions are centered in the camera frame, a lot of your work in the video is taking place just off camera which is a bit annoying.
@cjstein2000
Жыл бұрын
Still learning how to video, I'll get there some day😁
@Radio4ManLeics
Жыл бұрын
Unfortunately all your detail work is out of frame!
@melodyofloveinblood
3 жыл бұрын
I feel sad to see your hands shaking 😖
@nolanwilliams9325
3 жыл бұрын
Video framing is awful.
@cjstein2000
3 жыл бұрын
Hope it is better now, it's a steep learning curve, and you can't reshoot.
Пікірлер: 52