I've looked at many CRAVE tutorial videos on KZitem and of all of them so far yours is really the one that is most clear and easy to follow. It made a difference that I could read the 'subtitles' instead of trying to follow verbal instructions. Thank you!
@SynthesaurusRex
2 жыл бұрын
Thank you Redmond! I do think that for a certain type of videos (like instructional ones) the subtitles format is better than verbal one. At least I for myself prefer them.
@magnuslindstrom1538
Жыл бұрын
Wish you would understand how many times I had to puause go back redo. This was best crave tutorial I have seen.
@SynthesaurusRex
Жыл бұрын
Thank you, Magnus-man! I am always happy to hear that my stuff is actually helping people!
@tomphillpotts
3 жыл бұрын
Great video. One other thing that I would add: While playing a sequence, press SHIFT and a step number 1-8. When the step is flashing you can do any of these modifications to steps shown in the video, but you can do them while the sequence is playing. You don't have to stop and press REC then play and listen. You can change notes, add glide and ratchet, rests, accents, all on the fly while playing the sequence.
@SynthesaurusRex
3 жыл бұрын
Thanks for sharing that info! 👍
@michaelproctor8777
3 жыл бұрын
Really well put together. No long winded explanations. Just straight to the point. I spent the best part of a day with my Crave after watching this and playing with all that had been explained in this video clip. Had a great time learning, which this is all about.
@cruepprich
Жыл бұрын
Excellent tutorial! 🙏 Thanks
@bluesdudebassist
2 жыл бұрын
Thanks so much for this. I've just got a Crave and this was very helpful!
@SynthesaurusRex
2 жыл бұрын
I am always happy to hear that my stuff is actually helping someone! 😄
@mightymightyironhead
Жыл бұрын
Thank you for restoring my sanity. I was just button bashing and hoping for a miracle until i found your video. Man that button combination for the Crave arp and sequencer nearly finished me off.
@SynthesaurusRex
Жыл бұрын
Restoring sanitys is what I do. 😎
@micindir4213
4 жыл бұрын
This is the manual crave needed. Top boss video!
@abelmartinez208
4 жыл бұрын
Oooh yes. I have one but have yet to fully dive into all of its features. def needed this video in my life.Thanks for the tips.
@rancidstain
4 ай бұрын
About to buy one of these. This vid is very helpful. Thank you!
@SynthesaurusRex
2 ай бұрын
As long as you know what you are getting, you'll be having a lot of fun with it. It's a very simple, retro-like, monophonic synth. Without effects.
@da_skool
4 күн бұрын
Perfect, thanks
@woodster909
3 жыл бұрын
great tutorial, thanks. saved me hours poring over the manual!
@walrtbstudios5430
4 жыл бұрын
This is one to cut out and keep. Never ever managed to get a sequence into the Crave in six months of trying, and this should help- thanks!
@SynthesaurusRex
4 жыл бұрын
Thanky you very much, I am always glad to hear that my stuff is helping!
@walrtbstudios5430
2 жыл бұрын
@@SynthesaurusRex Just to update you, I never did manage to get a sequence into the Crave at all. Pressing the ‘play’ button does nothing whether a sequence has been programmed in or not. The only issue I can think of is that my green light does not flash whatever I do. Anyhow, I’ve now raised it with Behringer- wish me luck!
@user-se6jh1iu7m
Жыл бұрын
literally the best tutorial on youtube - thank you!
@davidrupture8892
3 жыл бұрын
Best Tutorial yet . Thanks ;)
@DarrenSangita
4 жыл бұрын
Great video, thanks for sharing insights on the feature packed but slightly confusing sequencer. Didn’t know about the glide function, nice!
@DavidBagshaw
2 жыл бұрын
I really needed this.
@glenesis
3 жыл бұрын
You Rock! This is the best tutorial on this sequencer. Thank you!
@cnotting
3 жыл бұрын
Hele duidelijke uitleg, dank !
@DollysplitBand
3 жыл бұрын
Very useful for a lot of behringers gear. The sequencer is the same on the Poly - D. I wish they'd done some more work to simpify it. It's not like they didn't have the space.
@SynthesaurusRex
3 жыл бұрын
I hear you, bro!😎
@mitchminimal6942
3 жыл бұрын
Thank you, very useful
@3ertin
3 жыл бұрын
Perfectly explained, thank you! I wish it had a function to record sequences instead of programming like the Arturia Microfreak. It is more intuitive, faster and uses fewer buttons.
@SynthesaurusRex
3 жыл бұрын
Yeah, me too, but you know what? For that price, I'm fine with that. 🙂
@Ogma3bandcamp
Жыл бұрын
Nice
@LevFunebrak
4 жыл бұрын
Great tutorial! I think you have an error in the description though. At 2:35, you press SHIFT + PLAY/STOP not REC. Sry if I am mistaken.
@SynthesaurusRex
4 жыл бұрын
Thank you for the correction! I'll check!
@Jon_Cast
3 жыл бұрын
Really great tutorial!! Help me a lot!!🤘🤘
@vincentlegourrierec681
3 жыл бұрын
Thanks 👌
@erosxion
4 жыл бұрын
Beautiful! Thank you! Ive been meaning to dive in.
@DYNAMIX.
4 жыл бұрын
Very helpful tutorial!!
@nereagonzalez7745
3 жыл бұрын
thank you I needed it :))
@CosmoStraaf
3 жыл бұрын
THANKS for the video...really help!!keep up the great work!!
@SynthesaurusRex
3 жыл бұрын
Thanks, will do!
@hajwitlox6548
3 жыл бұрын
Excelent! Thanks...
@EricJungeMusic
4 жыл бұрын
Fun stuff. I have a similar one on my MS101 :)
@tomphillpotts
3 жыл бұрын
Great video thanks. Small error -to save pattern @ 2:37, video shows pressing shift+play/stop, text says shift+rec. Do what the video does! Also must be a long press
@SynthesaurusRex
3 жыл бұрын
Thanks for the correction, Tom. I adressed that in the video description, but it can't hurt when people find that correction down here in the comments, too.😁
@GiovanniMazziotta
3 жыл бұрын
Thanky buddy!
@XHALE303
3 жыл бұрын
Dunno if it was on purpose or accident, but you played the chords of Fade to grey 0:43
@SynthesaurusRex
3 жыл бұрын
It was on purpose. Most of the things I play in the video are "musical quotes" from more or less popular songs.
@leinepest
3 жыл бұрын
tja das live switching funktioniert leider so nicht. im sync mit anderen geräten macht der crave immer einen reset der sequenz und haut damit alles auseinander. oder gibts da einen workaround?
@SynthesaurusRex
3 жыл бұрын
You have a point there, herr widmer. Live-switching patterns is in fact not as easy as it looks in the video. On other devices, like the Novation Circuit, if you switch to another pattern, it usually finishes playing the current pattern and then switches to the other pattern in time automatically. The Crave doesn't do that. You actually have to exactly time the switch. I am sorry, I didn't mean to miss-inform - I'm just used to manual switching :)
@neonpop80
2 жыл бұрын
Hello friend. Can you chain these patterns? Like if you want to tell it to play pattern 1 then 1 again then 2 then 3?
@SynthesaurusRex
2 жыл бұрын
I think you can, although I personally have never tried it. You just need to download the SYNTRIBE free software from Behringer, and you can do what you wanna do. I think. Like I said, I never tried it. Try it, and let us know how it went! 😁
@vlixesispunk
3 жыл бұрын
i have a question : sometimes i make a patter in the crave, i hit play and the crave plays the sequence right, if i stop the sequence an hit play again sometimes the crave doesn't play the patter from the beginning you know why ? its like i hit play and the crave play the sequence starting in page 2 instead of page 1 its a lil bit annoying i mean if you let the s sequence run it stars to sound like normal buts its annoying when you are playing live and you hit play and the crave plays the patter from the page 2 not page 1 sorry about my english hope you have an answer
@SynthesaurusRex
3 жыл бұрын
Didn't I explain that in the video? If you want the pattern to restart from the beginning, you have to press "RESET", else it will continue where you stopped.
@vlixesispunk
3 жыл бұрын
@@SynthesaurusRex thank you so much man, my english is not that good so maybe i missed that part thanks
@ChrisDepper
3 жыл бұрын
I have a quick question... If I'm programming a sequence but I hit a wrong note, can I correct there and then or do I have to finish the sequence first, and then correct it afterwards?
@SynthesaurusRex
3 жыл бұрын
Yes, you can correct a wrong input immediately, but don't ask me how now - I would have to look it up myself in the manual now.
@ChrisDepper
3 жыл бұрын
@@SynthesaurusRex Thanks for the reply. I've figured it out now - it's obviously really - you just save the sequence to where you hit the wrong note, edit the note, then add extra new notes to the sequence.
@edwardeeles4183
3 жыл бұрын
Why is it blue instead of black
@SynthesaurusRex
3 жыл бұрын
Because of the lighting. It is reflecting the blue sky shining through the window.
@damonshanabarger2604
3 жыл бұрын
Does anyone know how to create small differences in the volume of the individual notes in a sequence pattern? For some reason some of the notes in my pattern have a lower volume and its really starting to make me feel really frustrated. The volume is turned up too high on these notes when I try to use accent. I only want to even them out. Is my synthesizer broken? Should I contact Sweetwater?
@SynthesaurusRex
3 жыл бұрын
It's hard to say without hearing the actual problem. The accent function should only slightly raise the volume of the note. Maybe you should contact Sweetwater. 😕
@damonshanabarger2604
3 жыл бұрын
@@SynthesaurusRex From what I can tell from the Starsky video, the volume raise is pretty noticeable. Analog has it's eccentric behaviorisms that I'm just coming to understand. I think Sweetwater is going to tell me the same thing. Case in point, the VCA controls. Compression and DAW automation should help.
@damonshanabarger2604
3 жыл бұрын
Sweetwater tech gave me a spec sheet to do a diagnostic on it. I'll let you know how it turns out.
@damonshanabarger2604
3 жыл бұрын
@@SynthesaurusRex From what I can tell I was over reacting. Also leaving the unit on for 15 minutes as suggested in the manual made what was not really a problem less noticeable. Nevertheless being a studio engineer hobbyist, I should want to manipulate things beyond their normal functionality to achieve certain desired effects.
@SynthesaurusRex
3 жыл бұрын
I am a little snickering over here, because from what you said, I think you know WAY more about synthesizers than I do. I am actually having a hard time following what you are saying. And I am not trying to make fun of you with that, but rather making fun of myself (I am actually way more clueless than you might think). Anyhow: If your Crave keeps on giving you troubles, let me know, and I'll see what I can do 😄
@martinneal5240
3 жыл бұрын
Sorry Syntesaurus, But in you correction you say "press and hold SHIFT and PLAY/STOP, then choose the destination pattern and bank, and then press SHIFT and PLAY STOP. But how do you save a pattern and bank with one step. Do I press shift and rec and then ,say , 2 for the Bank , hit SHIFT and RECORD... and then follow the same procedure for the slot number wanted. ? Sorry pretty good vid..but I just dont follow this one at all.
@SynthesaurusRex
3 жыл бұрын
Okay, so: If you just record or edit a pattern, and want to save the result in the same pattern (not wanting to copy that pattern to another slot), just hold SHIFT + PLAY/STOP, and then SHIFT + REC. And in case you want to copy the pattern to another slot, press SHIFT + PLAY/STOP, and then select the desired bank and pattern number. You do that the same way you normally select bank and pattern: Press a STEP switch to select the pattern, and press PATTERN + STEP to select the bank. Then press SHIFT + REC.
@martinneal5240
3 жыл бұрын
@@SynthesaurusRex Thank you very much....I am grateful for your help.
@xisotopex
3 жыл бұрын
this is probably pretty similar to the malekko manther?
@SynthesaurusRex
3 жыл бұрын
Thanks for the tip, for whatever reason I have never heard of the malekko manther! Sounds interesting though! 👍
@tr-8s-master
4 жыл бұрын
Synthesaurus : could you give me a basic lesson about the Crave? I'm serious, somebody ran into trouble with it who I try to help, but I need some feedback from you, please.......
@SynthesaurusRex
4 жыл бұрын
I'd be happy to! Let's meet on Jitisi, tomorrow, around 10:00 am?
@tr-8s-master
4 жыл бұрын
@@SynthesaurusRex Perfect, you saved my day!
@tr-8s-master
4 жыл бұрын
@@SynthesaurusRex Ok, I'm there
@SynthesaurusRex
3 жыл бұрын
Jeezas, goddamit, I couldn't make it! I am so sorry! Let's meet on Saturday morning, I will send you an invite via mail!
@tr-8s-master
3 жыл бұрын
@@SynthesaurusRex The Puppy cried all day..... shall we ever meet again.....?
Пікірлер: 82