These amps are frequently bought by home theatre enthusiasts for driving subs. They do a good job but don't expect the power thats printed on the face plate, still they are still very good value. Thanks for testing it.
@wal
7 жыл бұрын
+z1power this is precisely why I thought many people may be interested in this test
@IncreasingVoltage
7 жыл бұрын
Nice to see some PA amps on the dyno!
@wal
7 жыл бұрын
+IncreasingVoltage people have been asking forever. I came across a good deal and decided to pick one up. I also have access to some other brands through a local shop Creative Acoustics
@yogibare01
7 жыл бұрын
Dereck BigDWiz can you try to find one that will do its rated power? crown seems to be popular.
@grncreek
5 жыл бұрын
@@wal I would also love to see more amps like this on the dyno, crown, qsc, etc...
@dantonliam
4 жыл бұрын
IncreasingVoltage I don’t think this qualifies as a pa amp...lol
@vannk73
6 жыл бұрын
Would love to see how other pro amps in this category compare to each other.. Crown, QSC, etc
@jasonneal
4 жыл бұрын
I had 2 of these amps for my studio for band practice. I had the europower series. They claimed 2500 watts, I figured it was giving me 1200 at the most, but for $300 each brand new and it was only for band practice, it was perfect.
@behringer
6 жыл бұрын
Please allow us to comment on this video. (and any other similar with the BEHRINGER iNUKE amps) We see this topic of discussion come up all the time on social media and forums. Just to clarify for those watching, all of our power amp specifications are rated in PEAK WATTAGE. So for example the NU1000 running @2ohm per channel (stereo) is rated at 530W PEAK. It needs to be understood that testing for continuous power as demonstrated in this video will give you a different number than we specify in our ratings, so it shouldn't surprise anyone that the numbers demonstrated here are different than what is listed in our product documentation. The same goes for the Bridged Mono output rating. It's because you are testing for a measurement that we don't specifically list in our product specs. Hopefully this sheds some light on the subject, thank you very much for your attention.
@wal
6 жыл бұрын
Thank you for clarifying
@EndstyleGG
6 жыл бұрын
It would be very helpful to include rms power ratings. I think very few people use these amps for a drum kit, where peak power would be more accurate
@JuanMoreno-lo3ml
6 жыл бұрын
greetings friend and the km 1700 amplifier you can test beforehand thank you very much
@wokafloka7192
6 жыл бұрын
BigDWiz lol
@TheKnightOperator
6 жыл бұрын
You should post your RMS rating. In all if you were being open and honest you would, there would be no reason not to. You're make amplifiers, you know people care about these specs. Not posting them you know is deceptive. Instead of making excuses just post honest RMS in the future so you're not embarrassed you were caught and wont have to make excuses in the future. Pretty simple. But that is the trend in audio, just straight up lying about specs. That's why there is such a market for third party testers. I would still buy these FYI because they offer a compelling price/performance ratio EVEN with these numbers and great features with DSP. Just be honest and people will trust you, your brand, and products. PS Pleaser make the inuke 12000 with DSP PLEASE!
@Goldtuno
7 жыл бұрын
thank you.. you should do more videos like this the PA brands need to be revealed
@wal
7 жыл бұрын
It is planned. I'm expanding beyond car audio amps.
@Goldtuno
7 жыл бұрын
thank you u should check out the behringer ep 4000 they are claiming big but i dont think so
@sissymarylen15741a
7 жыл бұрын
Leonardo Somoza the ep4000 is a rebadged ep2500 amp. it will do 2100 watts at 4ohm mono. I own two of them and they are worth every Penny
@Goldtuno
7 жыл бұрын
i have the ep4000 and o know they dont get close to rating just like the inuke ijust want to know how bad are they from their rated power they are solid amps just not power enough for bass
@especialistqap
6 жыл бұрын
Leonardo Somoza Behringer ep4000 Is equal to EP 2500
@dclowz586
7 жыл бұрын
thanks for the input. my friend recommended the inuke 3000 so this gives me a good idea how it might preform!
@wal
7 жыл бұрын
I'm getting an NU6000, which is essentially (2) NU3000's in one chassis. It should do over 2kW per channel for teh NU6000 and total for the NU3000
@dclowz586
7 жыл бұрын
Dereck BigDWiz you should get the dsp model
27 күн бұрын
Hi Williston, i'm from Brazil. I have two Benhringer Line Inuke NU 1000 and NU3000DSP! Congratulations! 💚💛💙🤍
@texasflysuperstar
7 жыл бұрын
Talk about rounding up to your nearest 1000W!
@wal
7 жыл бұрын
I was curious why they don't show RMS ratings in the manual for this amp. They show the NU3000 as 2200 watts, so based on the percentage vs 3000 watts, my measurement for this amp is right on
@wishusknight3009
6 жыл бұрын
I use 2 of the older Behringer D6000 amps. SImilar to the inuke 6k but IMO a bit more robust. And i got the 2 of them used for $500 canadian about 10-12 years ago, and they have never let me down. I am squeaking about a kilowatt per channel at 8 ohms which i think is quite fair. I use them for a couple sets of commercial 18" drivers in custom boxes for live band and dj'ing. I have also kept a compressor on them to keep them from clipping. So they have never been abused, but they are driven close to their rails for about 10-14 hours a week, and have been for years. I have also tried running my 4 bins off one amp when I have the recommended 30A circuit. And it seems like almost as much power, but not as much tonality or control. This amp is rated 1100x2 at 8 and 2200x2 at 4 RMS, with peak numbers being 50% higher. And it seems able to do that... they have been the best purchase for my system I have ever made.
@BARBELLS-AND-BUDS
7 жыл бұрын
I think $149 is a good value for a 600 watt amp and they could make more sales rating it as such.
@jeroenschuuring6060
7 жыл бұрын
the original owners manual, dating back six years now actually specifies the amps output considerably lower. the newer manual only states maximum output figures. but still pretty accurate. the only one that's off (by a small margin) is the output @ 2 ohms and Of course 4 ohms bridged. what's really nice about these amps is their power intake, they are really efficiënt. I can run 4 nu3000 amps off one 16amp 240v socket giving me about 7kw of clean RMS power! Mosfet amps would give me trouble using more then two 2kw. amps on the same outlet. class D makes my life a lot easier.
@BARBELLS-AND-BUDS
7 жыл бұрын
What are you running all that power to? Dj, home theater?
@Assimilator702
7 жыл бұрын
bassmansoundking99 HT most likely. These amps are VERY popular if you head over to the HT forums.I plan on using 2 6000's on a pair of Ultimax 15's.
@EndstyleGG
6 жыл бұрын
LoL saying 7kw of RMS power. RMS is continious and 240v 16a can deliver about 3600 max so thats wayy off 7kw
@FOH3663
3 жыл бұрын
@@EndstyleGG I know this was three years ago, but your statement about circuit amperage isn't correct... and nearly everyone thinks the same way. A circuit breaker will pass huge amounts of current for long periods of time (to prevent nuisance tripping on motor startups etc). A 16 amp circuit can pass 7-8 times the rated 16 amp trip amount, .. for up to a second or more. It will allow up to 3x the rated amount for up to 10sec or so. Amazingly, the same circuit can allow up to 1.5-2x the rated amount for a period extending as long as 30 seconds! So that 16a breaker will pass 30a or more for a sustained thirty seconds. For brief periods, like dynamic music peaks, the circuit will easily pass over 100amps.
@HifiVega
7 жыл бұрын
Thanks for the shout out! Even tho the amp didn't do rated... I still consider it a heck of a deal.
@wal
7 жыл бұрын
+hifivega we may have to rename you mix-master Vega...or DJ Magic Vega 😜
@HifiVega
7 жыл бұрын
Haha I wish
@STLRCDRAGRACECLUB
7 жыл бұрын
i use this amp for djaying i love it i have it for about 4 years now no issues at all
@wal
7 жыл бұрын
Great feedback, thanks!
@dstefanovxd1290
3 жыл бұрын
Hey, do you still use it and how he is handling now?
@STLRCDRAGRACECLUB
3 жыл бұрын
@@dstefanovxd1290 its still running great no issues at all
@Ebacherville
7 жыл бұрын
thx for testing home/pro gear.. I agree not bad watts per buck even if not reaching rated power.
@wal
7 жыл бұрын
thanks for watching/commenting!
@Python1567
7 жыл бұрын
I have a crown XLS 2500 I wish I could send you to test but I don't trust shipping to get it to ya and back. It's rated for 2400rms @ 4 ohm bridged. Cost around $500. It has enough power to make my lights dim in my room. Maybe one day I'll see it on the dyno! Great vid as usual!
@wal
7 жыл бұрын
+Python1567 I can prob get this from my local Crown dealer to test
@Python1567
7 жыл бұрын
+Dereck BigDWiz That would be awesome, I have always wondered what it does.
@peterkay2406
5 жыл бұрын
calee4nyaboy this was all 2 years ago lol
@MinasK.97
6 жыл бұрын
*Please* , test a Crown XLs 2002 amp!!
@LuxorVan
7 жыл бұрын
Usually the difference between Class D and Class A/B amplifiers is the Signal to Noise ratio! But that can be fixed with decent crossovers and well designed internal pre-amplifer sections! Most companies in the car audio industry do not think about SNR when designing their Class D amplifiers and only focus on ease of manufacturing in mass quantities! Big D this is one thing you forgot to mention for Newbies to look for when purchasing an Amp, Always check out the Box when shopping to get details, like the Signal to Noise Ratio, the higher the number in DB the more clarity you will get from your amplifier! One of the first things taught in the Old School Audio Magazines from the Early to Mid 1990's!
@chasewallace1232
7 жыл бұрын
Please do test more amps like this. I've sort of moved on from the huge car audio setups and want a crazy basshead home theatre set-up. I can never afford the best of everything but I've always tried to do my homework and get stuff that supposedly did rated rms or better. Now that I've seen my old amps on the SMD amp dyno it seems that all of them actually did. Thank you for the vids!
@wal
7 жыл бұрын
+Chase Wallace those of us fortunate enough to have Amp Dyno's should test all flavors of audio amplifiers 🤓
@chasewallace1232
7 жыл бұрын
I hope you didn't take that wrong because I still enjoy seeing the real numbers of any amp. Basically I was just meaning to say I love your channel and wanted to add two thumbs up for adding in more home audio stuff to your channel. I think a good many of us old school car audio guys are at the age now to be messing around with home audio setups as well =)
@wal
7 жыл бұрын
No sir, I didn't take it wrong, just sayin' there are a lot of tests of car audio amps online, but very few of home/pro/other audio amplifiers. I totally agree with you and I like testing home/pro stuff too.
@jesperbremer9293
5 жыл бұрын
Thank you so much for testing PA amps. Unfortunately I believe you got the rating wrong, if you read the specs sheet, it says: Specifications: • Output power (per channel, stereo): 110 watts RMS, 160 watts peak (8 ohms), 210 watts RMS, 310 watts peak (4 ohms), 380 watts RMS, 530 watts peak (2 ohms) • Output power (bridged mono): 430 watts RMS, 620 watts peak (8 ohms), 750 watts RMS, 1050 watts peak (4 ohms) Your dynotest just show that the Behringer performs as promised in tests! Also monitor mains supply, class-D amps is very sensitive to small drop in supply voltage... And thanks again for testing PA, looking forward to AMP DYNO TEST "Behringer Europower EP4000", low price "old School" killeramp, yes really...
@wal
5 жыл бұрын
That spec sheet was not available at the time I tested this amp, but that’s great!
@Guiltless765
5 жыл бұрын
Can always count on D to bring us the real numbers.👍🏻
@poodlelord
7 жыл бұрын
Thank you so much for testing this! I have always been tempted to get this but i just never trusted their numbers. That's still a heck of a deal, especially considering how many wats/$ you get.
@wal
7 жыл бұрын
+poodlelord I enjoy testing all types of audio amps, home/car/pro. Too bad Behringer didn't rate this one 500 watts RMS (hint, hint)
@shadrachjackson752
4 жыл бұрын
Thanks for your videos they are much appreciated and valued. I was searching for a test on the Nu:12000 but haven't found one. Will you please do a review and power test on that one. Thanks again for your expertise.
@bodyshotjake7475
6 жыл бұрын
Honestly “pro audio” amps seem to be some of the most incredibly over rated. Please do some more pro audio. Just like these, budget pro audio amps would be great
@shockmannaudio6807
7 жыл бұрын
Def heck of a deal. Looking back at how much an amp putting out that kind of power back in the day would cost. 🔊🔊
@wal
7 жыл бұрын
+Shockmann Audio I know, it is getting crazy 😮
@envisionelectronics
7 жыл бұрын
A couple notable items: The amplifier has a non-defeatable compressor/limiter to prevent full clipping. This amp does sound very good. I've used the entire range in front of house racks and nobody has ever complained about the SQ.
@envisionelectronics
7 жыл бұрын
I only use the NU1000 in fill applications. I already knew they were all about half the faceplate rating. Behringer used to print the actual specs on their website.
@wal
7 жыл бұрын
+Aaron Hammett great info, thanks 👍
@bkrgls
7 жыл бұрын
For the money it did pretty darn good...but I wonder about the longevity of it. I been wanting one their EQ's but the majority of the reviews that I read are bad. Alot of the reviews have the biggest complaint of build quality. Hopefully that won't be an issue with your amp. Great video as always and keep up the good work. Please don't stop doing the little funny videos within the video...LOL!
@woofervision673
7 жыл бұрын
not surprised by these results... behringer is like the lanzar of pro audio. I've noticed in the past the noise floor is pretty bad on behringer products too. Still a good bit of watts for the money though and not a bad looking amp. thanks for the vid! I've been wanting to see pro gear dyno for ages
@exoticg9
7 жыл бұрын
if you get your hands on a " The t.amp E-800 " make a vid :p
@DrakkarCalethiel
7 жыл бұрын
exoticg9 I have that amp and I love it! Sounds pretty good and has good output power. Don't know how much it really puts out but it can't be much lower than rated.
@davidwoodbridge862
5 жыл бұрын
I use an inuke 3000 DSP for my PC speakers and am aware that when you dig a bit and look at the actual specifications Beringer quote (from memory) somewhere in the vicinity of 850 Watts RMS per channel. So, nowhere near the 3000 Watts quoted on the box and in the ads. If it were in fact 3000 Watts it would exceed the ratings for the standard 240V power outlet here anyway and the supplied power cable is only for a standard outlet. It does sound good though and the DSP part is great and yes I like it loud.
@michaelvickers89
7 жыл бұрын
I just found that this amp can be had used for about $120 and if you just need power then you can't complain for the price. I was actually surprised that for being basically one of the least expensive pro audio amps it actually got up to 869 watts. Would love to see more of these pro audio amp tests in the future 👍
@wal
7 жыл бұрын
+FAST & LOUD !!! MICHAEL VICKERS aka GUCCI STYLE Rockville makes a cheap one $139 that is rated for 1500 RMS. I may try one of those too
@michaelvickers89
7 жыл бұрын
Dereck BigDWiz That would be awesome Big D ! I will watch any video you make because you do a really good job and I see you as just another guy who likes audio and everything in regards to it ! I like watching these "average" guy videos and things that us regular people could afford !!!!!! watching the videos with things we could never afford are nice and all but this is way better ! man you & SMD should have a car audio show on TV !!!! it would be cool to see you guys doing amp dyno 's on all the amplifer made and subwoofer reviews and installs ..... that would be my dream TV show to watch 👌👍✌😊😇
@MarvinConnell
7 жыл бұрын
Behringer rates amps using max wattage(& I believe there's a good reason for that)... I own the amp & have interacted with their Customer Service to get the RMS wattage & was told it's basically 760RMS @ 4ohms bridged...
@wal
7 жыл бұрын
+Marvin Connell it would be nice if they 1) either gave everyone RMS ratings or 2) at least state the ratings are MAX
@volodumurkalunyak4651
6 жыл бұрын
they give RMS ratings at spec sheets
@peterkay2406
5 жыл бұрын
test everything even a little transistor radio (are these even made anymore) lol If it's an amp I don't mind any of them being tested, I enjoy watching them all... your the best at what you do imho
@omegared7486
4 жыл бұрын
I have the Behringer A500 and that thing slams anything. I put on it No Dyno needed. Good vid.
@wal
4 жыл бұрын
That’s all that matters if you like it then 👌
@sissymarylen15741a
7 жыл бұрын
For the price Behrimger is Hard to Beat. You can Buy 5 of these for the price of other pro audio amps
@sthembisonala
5 жыл бұрын
Dyno Behringer NX3000 Power amp please
@analogaudiorules1724
5 жыл бұрын
could you test the crown xls 2502? the crest prolight 2, 5, 7.5? the qsc rmx 850a 1450a 4050a?
@davidspl
7 жыл бұрын
thanks for good info in the amp. super cool channel
@wal
7 жыл бұрын
+David Rodriguez thanks bro 👍
@hahasimpsons
7 жыл бұрын
PA amps need a high voltage input to perform well. What was your compensation for this? I use a 8ch DI box between my pre and my 4 Altec Lansing 9444A anniversary edition amps, because they otherwise supply hardly any output. Your test showed expected results btw, which still makes this a great amp for the money when bought new, and a even better deal when picked up used. Thank you for doing all these tests for us. I appreciate it.
@wal
7 жыл бұрын
I used 4 volt input for this test, afterwards, I connected my mixer to provide higher voltage and the results were the same. People who are using these with HT receivers may need a way to boost voltage as many receivers put out around 1 volt. You will not reach maximum output with this amp and 1 volt input
@hahasimpsons
7 жыл бұрын
Thanks for the reply. I first used an Art clean box pro to up the voltage as I think my Yamaha only put out .8V, which was pathetic. You obviously know your stuff, so thanks again for doing these vids.
@WiKiTWoNKa
Жыл бұрын
It would be nice to know if it could handle 2 ohms (which is probably where the 1000 watts would come from) most likely not 1 but still it would be nice to see the effort
@evanjohnmo
7 жыл бұрын
I'm so happy you did this test with this type of amp. It would be so interesting to know if Crown and QSC amps rate their gear at accurate levels. I have a QSC GX7.
@wal
7 жыл бұрын
+XXVelocityXX I'll try to get my hands on a Crown...I'm betting it will do rated plus
@evanjohnmo
7 жыл бұрын
Dereck BigDWiz Awesome channel. I agree, Behringer makes some great MIDI stuff, but still entry level for pro audio. Crown tends to be industry standard.
@taebinrice1701D
7 жыл бұрын
A Crown XLS DriveCore 2 series would be a good test, has RCA input with selectable "Pro" level or "Consumer" level input and binding post outputs, defiantly the most appealing line to the DIY home user.
@thatsmybit
7 жыл бұрын
Excellent test
@wal
7 жыл бұрын
+LegacyGT 🤘
@titanman59
7 жыл бұрын
would like to see one of crown CTS series amps tested
@Assimilator702
7 жыл бұрын
Nice test run. If you look on parts express the ratings are given more conservative and closer to your results. Not sure why higher power #'s are given on other websites. This amp is rated as 110x2, 210x2 , and 380x2 for 8, 4 , and 2 ohms on the PE website.The units with DSP look nice for HT sub use.
@wal
7 жыл бұрын
+Joe Rico Behringer themselves showed the accurate results before, now they only show the max stuff.
@Assimilator702
7 жыл бұрын
BigDWiz Yes this bothers me as well. But it looks like PE is at least attempting to give consumers some #'s that resembles something closer to the truth. The #'s Behringer gives could very well be what the units SHOULD do on paper. Most audio engineers get into the ballpark solely based on the calculations then fine tune from there. I guess that one bit of advice from guys that know how power and gain structures really work holds true....."buy as much power as you can afford". Then it's just a matter of making sure the electrical in your house can handle it.
@emilioguerrero1621
4 жыл бұрын
How 'bout testing the iNuke 12000. Would be very nice , so we can see if the promised power is true. Thanks !
@heatexchangeskittles
7 жыл бұрын
I have 3 of these....always thought the weren't the power rating they said.....not impresses at all. thanks for testing it @bigDwiz
@wal
7 жыл бұрын
+Rich kent not quite...I'm also a bit concerned with those using this amp for HT as I don't believe the 1v output from most HT receivers is enough to drive this amp. My 4v head unit still required 9/10 gain on the Behringer
@heatexchangeskittles
7 жыл бұрын
Dereck BigDWiz I have to set the EQ gain high on these so that makes sense
@LasseHuhtala
7 жыл бұрын
Pro gear uses a higher input signal level than consumer gear.
@heatexchangeskittles
7 жыл бұрын
Lasse Huhtala it does ...when I use my qsc amps the level (gain) is 35% lower than the nuke 1000. there budget digital amps so you get what you pay for its just sad there that off there spec.
@LasseHuhtala
7 жыл бұрын
In Behringer's defense, they do have a bunch of really good products in their line-up, their power amps just seem to be a bit too cheap for their own good, to the point of not being honest with the numbers.
@ricovalencia4433
2 жыл бұрын
Ask ko kung mgkano nu 1000 lightweigt ampli
@johnguilbert1349
5 жыл бұрын
Cool video. I would love to see a video on the Crown DC300A Series 2, and also the Crown MacroTech 1200. I used to have both amps and man they were heavy, bullet proof and I've melted some voice coils with them. The DC300A had capacitors bigger than coke cans. The MacroTech supported Load Impedances: Rated for 16, 8, 4, 2, and 1 (parallel mono only) Ohm operation; safe with all types of loads, even totally reactive loads....... 0 Ohm loads, basically a direct short, like it was like a welder lol!
@thebestofall007
7 жыл бұрын
Could you do a test on head unit internal amp outputs with the dyno, please? Maybe one of those "mosfet 50" amps will put out something besides hot air. There's nothing much to the circuit on these - just an amp IC and about ten components. I made one from scratch from a TDA-7850 IC for a boom box.
@mikemajewski8656
7 жыл бұрын
what do u suspect the inuke3000 rates in at?
@ProDigit80
6 жыл бұрын
BigDWiz, Thanks for this video! We now know that Behringer is about 33% off on their inuke amps. Same with their newer "bugera veyron" amps (spinoff company). Would love to see the rating of the Behringer KM750. It seems a different design amp, and I'm not sure if it's rated in this same fashion; since it's a lower power amp, but priced higher.
@wal
6 жыл бұрын
Interesting, thanks for the info
@vocalone23
7 жыл бұрын
the pa guys are using a driverack for high line input... may need more signal or what?
@wal
7 жыл бұрын
I tried a mixer, same output. Just bought a Rolls MB15b ProMatch to try as well and use with future amps without RCA ins.
@lumill6967
7 жыл бұрын
I had to get an Art CleanBox Pro to convert RCA to Balanced and boost the signal. Works great for$65.
@boostsr2065
6 жыл бұрын
I’m trying to use this amp to power a single Ultimax 15 with a Denon AVR. It barely moves the speaker and it’ll clip easily. Could this be from a low input voltage? Would the Rolls make that much difference?
@shanen921
7 жыл бұрын
Another great video. Thanks Big D
@haraldpost
Жыл бұрын
well the inuke 1000 datasheet actually says 2x200wrms @ 4 ohms. So that is bang on.
@wal
Жыл бұрын
😬👍
@eddalton8530
4 жыл бұрын
have you or anyone else ran a dyno on the behringer ep2000 or ep4000 ?
@danielememo9089
5 ай бұрын
Ciao dovrei pilotare un amplificatore per organo in bi-amplificatore con crossover a monte del finale. Il driver per alta frequenza ha una impedenza di 16 ohm. Gentilmente mi potresti dire la potenza RMS con carico di 16 ohm...? GRAZIE!!
@molloyvader
7 жыл бұрын
Thanks for reviewing this.
@wal
7 жыл бұрын
+jervon molloy thanks for watching and commenting 👍
@michaelvickers89
7 жыл бұрын
Awesome ! I never seen a dyno of a pro audio amp 👍😎
@wal
7 жыл бұрын
+FAST & LOUD !!! MICHAEL VICKERS aka GUCCI STYLE I asked Steve Meade if he tested his Crown Amps (used with his massive towers) and I don't believe he has yet.
@BB-bu7gq
7 жыл бұрын
yeah doesnt come as a surprise as on a dynamic song/track the NU3000 does about 2400-2500w, that 850w in bridge on dynamic mode is therefore not a big surprise
@nickdongle8990
7 жыл бұрын
the inuke series is rated at peak power. they have the rms specs on parts express
@davidking2391
7 жыл бұрын
BigD, Is it possible to make a video showing the difference between sine wave and full spectrum pink noise using the AD-1? it would be interesting to see if there's any difference in output.
@wssrradio2830
7 жыл бұрын
How do you change the Ohm settings.......? I have a nu3000 I want to set it to 4ohms..
@lotechgreg
7 жыл бұрын
Definitely more Pro Audio amps. Would love to see how the Crown XLS's stack up....
@wal
7 жыл бұрын
I should be able to get one of those locally to try out
@CVLova
7 жыл бұрын
that would be awesome:;D
@vettonator
7 жыл бұрын
Thanks for testing. Now that you have the cables and whatnot should be easy to do more Pro Audio stuff like this in the future. Another popular pro audio amp that a lot of people might want to see tested is the EP4000. Allegedly it's about 2000 wrms and can be picked up for $320~$350. I can loan one for testing but I wouldn't want to pay to ship it though cuz it's a heavy bastard. Hmu if you want to try one.
@wal
7 жыл бұрын
I'll keep my eyes peeled for one of those. I'm getting the larger NU6000 soon as I picked up one for about 1/2 of retail. Thanks for watching and commenting.
@ThePackman99
7 жыл бұрын
More pro audio amp tests would be awesome!
@wal
7 жыл бұрын
Will do! I'd love to get some of the 90's Proton / NAD / Adcom /etc home amps to test as well.
@gopyyanusdev3486
2 ай бұрын
Do a amp dyno test behringer nx6000d
@wal
2 ай бұрын
Thanks for the suggestion
@gopyyanusdev3486
2 ай бұрын
@@wal thanks mate 👍
@workaholic7600
6 жыл бұрын
Although it had false power ratings it still seems to be a good deal on what it did perform. I have a question for you Big D. On my home 2ch stereo set up I am using a Pioneer Elite vsx99 and it does provide pre amp outputs. In Your opinion would this make a good amplifier to get more power to my klipsch Quartets? Or would I loose out on quality detail in my music?
@wal
6 жыл бұрын
I would personally stay with the Pioneer amp. Also, it is possible the preamp outputs in the Pioneer would not have enough voltage to drive the Behringer. You would need an impedance matching box, such as the one from Rolls.
@PR_Carlos7784
Жыл бұрын
Hi W audio great channel , do you have a dyno test to behringer ep 2000 and ep 4000 amps thanks very much….👍👍👍
@nickking8317
6 жыл бұрын
now could I ask a question about this amp considering the high underrating's on the wattage would it be ok if I was to run one for a compression driver?
@mattsnider5904
Жыл бұрын
Hey can you dyno a Rockville RPA 14 or 16 dj amp. Liked to see if wattage ratings are accurate. Thanks bro! Very informative videos, keep it up!
@wal
Жыл бұрын
Thanks for the suggestion
@alfa7108
4 жыл бұрын
Big D, if I can test out a Rockville home bass amp. They jam. The rpa5 is rated 500 watts bridged at 4 ohms but I actually tested it bridged at 1 ohm and it didn't blow up and handled it for awhile but I shut it off, didn't want to try and push it's luck. I meant You test it. Dang phone.p.s. Infinity is awesome.Also had Duel fans.
@protoman247
7 жыл бұрын
review the inuke 3000 plz
@dietershobbypakanal
6 жыл бұрын
Yes test the NU 3000 from them
@chefchutardo5215
3 жыл бұрын
god bless megaman 🙂 so many hours of fun with a beer.
@emerybryant
7 жыл бұрын
question. can you use that nl4fx connector and not run in bridged? just out to sub?
@bunnatang
11 ай бұрын
you should use XLR unbalanced output from a mixer for this amp. 6mm balanced is not enough sound signal
@3dprint-tech787
6 жыл бұрын
Do you have an idea of the 8 ohm bridge power? Is it safe to assume it's half the 4 ohm power? Thx
@Zordid0
6 жыл бұрын
How about 16 ohms? I'd like to use it with a guitar cabinet.
@dylanealey2179
Жыл бұрын
Have u tried the behringer 3k? I wanna see the power on those if you could!
@przemyslawpisanko4485
7 жыл бұрын
I buy behringer inuke 3000dsp i tested yesterday and have some issue i have juzt 29.3v clean output to the speaker when i go more then go intro distortion on my distortion detector. This is right or i have bad unit?For me its more look like inuke1000dsp in case 3000dsp. My old amp rated to 500w rms and i have like 34v output. Tell me if every one 3000dsp have just 29 v output or i just have bad one ?
@Joe_1776
6 жыл бұрын
Still am using this amp, to push my 15" Sundown Zv4, I have in a custom box for in my living room, while it clearly is way below the Zv4 15 rms specs, it is still going strong with zero issues and makes this 15 pound pretty darn good for home use. P.S. I bought this Inuke purely off this videos dyno results, (wasn't originally meant to power this Sundown)
@ArthurCheesebag84
7 жыл бұрын
You are the man, Michael Shultz sent me.
@BoozyMcHound
5 жыл бұрын
@4:24 - you pointed to the TR and BL connections. Those are 1+ and 2+, not the 1+ and 2- you referred to. You can see the small descriptions in the close up. And the next shot is your wires in the 1+/2+ positions. You've wired it correcty (note the back that says bridge 1+/2+), just misspoke.
@MAD450r2
7 жыл бұрын
im using one of these to power 2 MCM Electronic 18 inch subs in my home theater. i got mine on ssle for $99
@MAD450r2
7 жыл бұрын
keep up the great vids.
@doddgarger6806
4 жыл бұрын
I would love to see a crown ce4000 tested
@wal
4 жыл бұрын
👌😬👍
@johnstarks5323
7 жыл бұрын
You Know For Most Pro Audio Amps, It's Input Signal Needs To Be At 1.4Vrms Unclipped In Order To Get Rated Power Output From The Amp In Most Cases... But Thanks For Testing This Amp. I Was Wanting You To Test Pro Audio Amps For A While Now... Thanks..
@wal
7 жыл бұрын
+john starks yes, but this amp needed a full 4Vrms to make full output power. Thanks for watching and commenting 👍
@johnstarks5323
7 жыл бұрын
Thanks for the reply, but was you able to feed this amp the necessary input voltage it needs for it to be able to generate its supposed rated power (from a car deck)?
@CVLova
7 жыл бұрын
many headunits puts out 4v ^^
@johnstarks5323
7 жыл бұрын
I Guess Your Right, I'm Just Starting To Get Into Pro Audio, And Just Wanted To Make Sure This Amp Got The Input Voltage It Needed, Since It Didn't Make Rated Power.
@CVLova
7 жыл бұрын
john starks no worries. This is basicly line a boss car audio amp quality. They overrate things to trick the avarege consumer to think they put out the rated power. Always pay for quality!
@kobenicolesaxor1263
7 жыл бұрын
Is it ok to connect my Yamaha 8 channel mixers to my Azur cx series amplifier?thanks
@aaronatwood9298
2 жыл бұрын
I use one of those for subs. It’s a very good place, their full range sound is odd.
@davidmcdonald3614
6 жыл бұрын
I may have misunderstood you, but when wiring for bridged operation the connector would be wired 1+/2+, you said the negative side, maybe referring to the wire, but if wired 1+/2- your results would be skewed.
@wal
6 жыл бұрын
I was referring to negative of wire
@bigsexylawson
4 жыл бұрын
Are you out of Williston North Dakota?
@bissenbakker1975
5 жыл бұрын
What did it doo at 2 ohm mono?
@johnstarks5323
7 жыл бұрын
Glad To See You Bumping Dj Magic Mike Feel That Bass... Even Tho You Had All The Words Xover Out, I Still Know That Beat / Bass Programming...
@wal
7 жыл бұрын
+john starks you got it!
@RandallDibble
5 жыл бұрын
I'd like a test Dyno test on a Behringer NU3000dsp
@wal
5 жыл бұрын
I have a Pro amp test coming up, but it’s not Behringer...
@johnsmith-qz4bv
6 жыл бұрын
can you do an amp test on the behringer nu3000.? like you videos...i have 4 subwoofers thats are 360 waats RMS 720 WATTS PEAK EACH .. LOOKING FOR AN AMP TO POWER THEM THANKS..
@johnpick8336
6 жыл бұрын
What about the tone ?
@jeffpelletier5186
4 жыл бұрын
Also. It’d be interesting to see a test of a lab gruppen 20k44.
@wal
4 жыл бұрын
The fake ones that are being sold or an original?
@jeffpelletier5186
4 жыл бұрын
A real ones. You COULD rent one from a local production company. They’re super expensive otherwise. Annnnd. You should try driving these with a proper balanced audio signal. I’d be happy to clarify any pro audio related questions you have.
@JAlejandroHL
7 жыл бұрын
Hi there, when can you do a alpine mrx-m240
@69_MK
6 жыл бұрын
Hi, would you recommend an amplifier than actually will output at least 300 x 4 ohms, thank you. EDIT: I realised this amp goes beyond that at 4 ohms mono.
@oldskoolbassvan9809
Жыл бұрын
the crown amp was way better and did more than the rated power I just purchased 2 of these Beringer NU1000 for $188 used I wanted them for a full range set of speakers I knew they would not do 1000 maybe if you switched it to 220v it would make that 1000 watts
@omarvilla1844
7 жыл бұрын
hey brother I wanted to know if you have heard of a brand name called Cantus Banda 4800 it's a 4 ch amp 800 watts Max supposedly. I bought it for $10.00
@BARBELLS-AND-BUDS
7 жыл бұрын
Thanks for the video! I was just emailing them last few days asking the rms power of the NU6000. They are giving me double talk and I let them know that I believe it devalues their stuff with fake ratings as some rate 4-5x the rms and I group them the ame if I dont know the truth.
@wal
7 жыл бұрын
+bassmansoundking99 I'm getting an NU6000 in soon. From what I've seen, it should do around 2kW/ch. the NU6000 is two NU3000's, so not bridgeable.
@BARBELLS-AND-BUDS
7 жыл бұрын
I have heard it is about 4k total as well on HT Shack I think Will be great to see that one tested! They have a DSP version as well, and I am researching it now
@mrcheezle6
5 жыл бұрын
Could you do the Rockville db55 5 channel?? Mind as well since youve done a few others. Also, can you do this video again but with voltage at, at least 14v
@brian2305
7 жыл бұрын
D aren't voltage inputs of pro audio gear way higher than what car audio and home receivers can do? I have a converter on all of my home stuff to pro audio gear to increase the input voltages. Check it out!!!!
@wal
7 жыл бұрын
+Brian Anderson I used the Alpine and also my mixer with XLR inputs and got the same results
Пікірлер: 456