Bought a roller the other day and immediately went to mod1. Best decision I ever made
@Rcprescription
Ай бұрын
Yep… mod1 is for sure the way to go…. Good luck..🤜🤛
@FZERO20
Ай бұрын
@@Rcprescription I’ll try to edit and post the video on my channel and send it to you if possible. I just finished the car two days ago. It took me hours to grind down the spur gear and the motor mount to get it to fit. But it isn’t interfering with anything and it rolls in gear very smoothly
@Rcprescription
Ай бұрын
@@FZERO20 awesome! I’d love to see the runs when you get ‘em posted!
@scaleworksRC
3 ай бұрын
I know it's a bit of an older video, but appreciate the breakdown and details. There's plenty of run videos, but not many wrenching how-tos on this rig. Good to know what I'm potentially in for. Thanks brother! Have a good Sunday!
@Rcprescription
3 ай бұрын
Hey brother!.. glad it helped. It was a chore figuring out when they first came out with them!…. I’m actually re building that car now into a dual motor…. Slowly…😂🤜🤛
@scaleworksRC
3 ай бұрын
@@Rcprescription Yeah, just looking it over I'm like "uhh, HOW do I even service these diffs?"🤔😆 Thanks again!
@Rcprescription
3 ай бұрын
No worries brother!… if you need anything just let me know!🤜🤛
@RCvapor
Жыл бұрын
Nice build and great info on those cvd fitting the rear 👍😀👌
@Rcprescription
Жыл бұрын
Thanks brother!
@Moggmodels23
Жыл бұрын
Nice video mate. I've just changed all my gears out from 48dp to 32dp now 30t pinion gear on the spur and motor pinion 28t it fit brilliant a few washer like you said motor I'm running is 2150kv arrma Spektrum esc 4s should be good nice lot of power 😊😊
@Moggmodels23
Жыл бұрын
Rlaarlo ak-917 upgrade / mogg rc model kzitem.info/news/bejne/kqBjzZeliZiGmYo
@Rcprescription
Жыл бұрын
That’s awesome brother!… glad it helped. In one of my later videos I discovered that flipping the spur gear around for Mod 1 worked way better too…. What kind of speeds are you getting out of her?
@rccarsandmusic2641
Жыл бұрын
Use a power hobby mod1 gear
@Rcprescription
Жыл бұрын
I’ll take a look at that…..a flat faced gear would for sure be better
@mulder2400
10 ай бұрын
So wanting to upgrade the battery in my Carbon brushless version, what should I get ? I read the speed controller and motor can take higher voltages, so should I get a 11.1v LiPo now ? Will this degrade the e-components over time ?
@Rcprescription
10 ай бұрын
If yours is the carbon fiber RTR it should be 4s capable which would be 14.8 v I believe. I purchased the roller so I put my own electrics in…. 3s is 11.1 v and is a nice upgrade and safe if your worried about wear…. 4s would make it fly with the right gears!!
@mulder2400
10 ай бұрын
@@Rcprescription Thanks, yes 3.7v LiPo x 4 = 14.8v. You see I have used Drone batteries w/the XT-60 Plug I'm not using that are 3s 11.1v (3x3.7v). I was just making sure the Speed Controller and Motor could handle, sure it will go faster. Drones are more voltage critical, thanks again.
@Rcprescription
10 ай бұрын
@@mulder2400 no problem… yea the electronics will handle it for sure… and when I’m doing speed runs I run the HV batteries at 3.35v per cell with no issues
@Rcprescription
10 ай бұрын
@@mulder2400 I apologize. My intention was not to insult. But short answer it can handle 11.1 all day no issues for the electrics.
@DESOUSAB
10 ай бұрын
As far as the car is concerned, it handles 6S just fine. I'm running mine with a 1512 1800kv Castle motor and a Mamba X and it is extremely lively on 6S running 45/63 gearing. I've bashed it quite a bit and it is holding up just fine.
@countryriverrat2679
Жыл бұрын
good ifo bro. I'm wondering if you received an email from Rlaarlo for approval to continue to qualify. I never received an email saying i was approved. i registered way before May 21st. Rlaarlo will not respond to my emails. Am i missing SOMETHING?
@Rcprescription
Жыл бұрын
They haven’t responded to mine either!…. I called them out In my latest video in the title and they responded to me in the feed within 15 minutes…. So maybe that’s what everyone needs to do…. Very frustrating
@countryriverrat2679
Жыл бұрын
@@Rcprescription yeah bro . I'm spending all this money TP motor , servo Saga gears, mamba c 8s n don't even no if I'm approved. Frustrating u said it best. Thanks
@Rcprescription
Жыл бұрын
You got it brother… they said they were going to respond to me first thing in the morning tomorrow….. I’ll let you know if they do!
@countryriverrat2679
Жыл бұрын
@@Rcprescription thanks man
@rayswinford5691
Жыл бұрын
Do you have a 4 tec
@Rcprescription
Жыл бұрын
I do not have a 4 tec… I only have one traxxas and it’s the drag slash…. Is it a pretty good car?
@stuwest3653
Жыл бұрын
Rlaarlo told me that they weren't interchangeable because they were different lengths. Do you have full suspension travel? Can you measure the lengths? thanks.
@Rcprescription
Жыл бұрын
I have full travel on the suspension… ran it yesterday up to 60 mph… had a little crash all was good…. I can measure them this evening when I get home and get back to you.
Пікірлер: 31