It's been a long time since we've had Benny's Barra-powered Cresta at Haltech so we were super excited to see it roll in a couple of weeks ago. The car has undergone massive changes since our last feature over 5 years ago, and the time finally came to upgrade the old relay/fuse set up with a brand new PD16. Follow the Cresta adventures on Benny's Custom Works channel: kzitem.info
@teams5811
2 жыл бұрын
Man, I feel smarter just hearing these 2 guys speak!
@Mickey-mu1oq
2 жыл бұрын
Lol
@fissschy
2 жыл бұрын
It would appear that Rake loves it ;)
@OscarSegundo
2 жыл бұрын
Just came across Haltech and BCW channels and they'll definitely keep me entertained!
@haltech
2 жыл бұрын
Welcome aboard!
@bigmuz_pilot
2 жыл бұрын
White bonnet crew checking in
@KingMcAl
2 жыл бұрын
Does any one here think that Haltech, Benny's garage or Skid factory would've been as big on KZitem if it wasn't for Marty and Moog? Or at least I think it helped a lot of you guys start your own channels and create so much great content for all of us to be part of. First of all huge thanks to mighty car mods and huge thanks to the skid factory, Benny's garage and Haltech for all of these years with great content and provided knowledge!
@rimmersbryggeri
2 жыл бұрын
It's kind of morally the wrong way around though. It's true but I'd feel better if people were actually interested in the competent guys enough to seek them out.
@KingMcAl
2 жыл бұрын
@@rimmersbryggeri I didn't say they were ungreatful or doing anything wrong to begin with. But without MCM putting these guys out there we wouldn't have any of the other channels to take part of either. Therefore I'm greatful for the initiative MCM started and these guys continued with to educate us.
@brent225
2 жыл бұрын
Alot of thought goes into the programming of these. Its really nice to see smarts have been well used
@kennypool
2 жыл бұрын
The big man is so cool , never seen him mad or frustrated. I think you don't wanna see him angry.
@haltech
2 жыл бұрын
If you make him angry he turns into the Incredible Fork...
@someyoungguy6990
2 жыл бұрын
@@haltech So your saying don't fork with the big guy cause he will fork you up.....lol
@haltech
2 жыл бұрын
Forkin' aye...
@brianross4057
2 жыл бұрын
@@haltech For Ken Oath Mate.
@S3TVproductions
2 жыл бұрын
great watch
@gafrers
2 жыл бұрын
Benny's Cresta FTW Benny + Tuning Fork = Awesome
@pieflies
2 жыл бұрын
Seems Benny is a pro at laying cable
@FuManchu5ltr
2 жыл бұрын
Considering how many cars are being electronically written off with no supply of obsolete parts, this unit seems like a solution to reducing automotive waste on a grand scale. Would be good seeing a similar video of this unit being used to control regular BCM functions like HVAC control, windows, audio, lighting as well. Maybe via a floor layout of parts? A simulation or via a series of graphics? A great bit of equipment for sure.
@caryoga3211
2 жыл бұрын
My Starlet is getting one of these when I rewire the car for sure! Makes wiring so much simpler and easy to diagnose issues👌🏻 More inputs and outputs is always a positive too
@69MazdaR100
2 жыл бұрын
Don't use pin 86 for ground because when you wire up a diode protected relay, it will blow the diode up and leave you with nice flyback to the ecu output
@Turbochargedtwelve
2 жыл бұрын
Yea, I’d go a step further and say always look at the diagram for the relay before wiring it. There is really no such thing as a “standard” relay.
@aSinisterKiid
2 жыл бұрын
Hell yeah !!! Scotty and Benny working on the beast. I love when Benny get's together with Scotty and we get to learn more technical stuff. Aw yeah even Dave made an appearance !! The electrical wizard joins the madness.
@Jays22b
Жыл бұрын
Luv this tech , My 2500 is still alive and fighting strong, Cant wait to put a PDM on it
@autotuneengineering
2 жыл бұрын
Glad to see this on the market finally. I hated to have to use the I/O expander with my Nexus R5 and now I can upgrade to a more capable box and get rid of a few relay in the trunk.
@badgermetal
2 жыл бұрын
Been looking at doing a nice custom harness when I get a decent engine management I like and add boost. The PDM makes it look like an easy job.
@phuzz00
2 жыл бұрын
If you don't already have an ECU, it might be easier to go for the R5, which is basically the ECU and PDM all in the same box.
@GerardBendotti
2 жыл бұрын
nice to see you two in this one. clearly having a good time
@usedchoc
2 жыл бұрын
So good! Great work Haltech!
@DixonSwe
2 жыл бұрын
So good to watch the Haltech dudes and Benny, cool as cucumbers. 😄
@Devastator0
2 жыл бұрын
Excellent video as always boys!! Keep up the great work!!
@brettwalker5579
2 жыл бұрын
Its not that bad lol I termiate a connectorize 2 or 3 engine harnesses a day 😄
@xozindustries7451
2 жыл бұрын
That’s killer, it reminds me of my 2004 Chevy Trailblazer, everything was powered by the ecu and body control module, it will be great to have all the same features in my race car as that SUV had
@brockmacckie9905
2 жыл бұрын
Awsome work love the barra builds
@mikeymasi
2 жыл бұрын
Great stuff fellas a job well done
@samsonian
2 жыл бұрын
I love how you guys had no trouble volunteering Dave for the work you didn’t want to do in absentia…🤣🤣🤣 Cheers! 🖖😎👍
@krispykruzer
2 жыл бұрын
Masterclass stuff blokes !!!
@64nine
2 жыл бұрын
Thx for showing 👌
@MrMightyytau
2 жыл бұрын
I really like the PDM units over vintage wiring and plan to learn more
@theviking5667
2 жыл бұрын
My oltime favorit for shure!.
@harared831
2 жыл бұрын
Absolute legends.
@benphilippi9325
Жыл бұрын
would be interested in running a PDM in a marine setting, less things to corrode. Wish I could throw a haltech on my etec :D
@ivokraaier9740
2 жыл бұрын
20:01 cool hidden compliment ;)
@hksp
2 жыл бұрын
daddy dahm could use a couple of these
@MattyEngland
2 жыл бұрын
Meow
@7sq
2 жыл бұрын
Haltech hero's !!!
@socallmechris
2 жыл бұрын
I'd love to see a full "how to" write up on how to replace the fuse box in a haltech harness with a PD16. I would love to take advantage of that
@haltech
2 жыл бұрын
That's our next video:)
@socallmechris
2 жыл бұрын
@@haltech in that case I'll be buying a PD16 when it does
@haltech
2 жыл бұрын
Today is the day, we're awaiting your order :p
@socallmechris
2 жыл бұрын
@@haltech I'm on it!
@JerryMichaels7
2 жыл бұрын
Would love a video series like Dave did with the r5 but with an Elite/PDM setup....mainly so I can get a how too guide for my setup lol
@haltech
2 жыл бұрын
We've got a couple of PDM install and wiring videos in the pipeline. Stay tuned:)
@jesus_built_my_hotrod
2 жыл бұрын
This just makes me want to buy more haltech gear 😏
@haltech
2 жыл бұрын
Oh no! Sorry bout that.
@Turbochargedtwelve
2 жыл бұрын
Could you set up a display on the dash for you multi option functions? You could have a single button, set up however many steps you want, something like launch rpm then tap through, 3500, 3800, 3900, 4000….. 3500 each tap the screen would just display the new setting for 3s or similar.
@brandonlangsdon2539
2 жыл бұрын
Anyone else hear Benny burp at @5:19 haha
@incolink
2 жыл бұрын
Hey Scott you are pulling wires out IO box plug then crimping a super seal and stabbing in where ever in the PDM So for this very scenario Can we now re allocate the colors in the wiring allocation table in the software ?? oh wow configurable fail state that's awesome
@mattyosborne1453
2 жыл бұрын
What's the go with the Barra plug n play ECU's. Any updates on ETA?
@evo6swap
2 жыл бұрын
Thank you
@S30Build
2 жыл бұрын
what would be the benefits of getting the nexus r5 vs the elite 2500 and pdm 16?
@kinglouiesshed8995
2 жыл бұрын
What’s the torch Dave is wearing 👍🏼
@Monstero5o
2 жыл бұрын
Time for a Clutch Fan lol
@bigbothoee8617
Жыл бұрын
Lololol Dave looks like Jonny 5 hahhaahahah
@haltech
Жыл бұрын
HE'S ALIVE!
@AdamEwart
Жыл бұрын
In the case off an NA SR20 (Autech/variable lift on intake, thermos, fuel pump and various standard vehicle electrics), without a whole lot of bells and whistles, is a PDM a fair option, or is it worth saving the money and options for a fuse box system?
@tptrsn
4 ай бұрын
What sort of sensor(s) setup is used for the shifter position? Can it be a single linear sensor like a shock sensor type of a deal??
@haltech
4 ай бұрын
Yes it can!
@TRENDewyZ
9 ай бұрын
can a pdm be used on a 16v system?
@1one3_Racing
2 жыл бұрын
Has there been a price hike recently? I looked at a 750 for my track car the other day and I feel like it was $500 more than when I looked at them recently. Either way, I can't afford Haltech stuff :-(
@Tuilaione
2 жыл бұрын
Scottie and Dave are Car Wizards... 🙏🏾🙏🏾🙏🏾💪🏾💪🏾💪🏾
@jasond9452
2 жыл бұрын
'look what Davo's done'.
@FuManchu5ltr
2 жыл бұрын
Can I ask what the lighting attached to Dave’s head is that has transformed him into a cyborg?
@haltech
2 жыл бұрын
He's joined Orbital.
@FuManchu5ltr
2 жыл бұрын
@@haltech 😆
@lancemarriott9671
2 жыл бұрын
Great I just bought the platinum io expansion boxes for my e2500 like an idiot 😂
@davidchambers16
2 жыл бұрын
That seems like a lot of coolant pressure. 78PSI
@hoonaticbloggs5402
2 жыл бұрын
Why? Coolant is at boiling point or higher, and it can go over boiling point because it’s pressurised They used to push huge trains with steam pressure. In fact the whole industrial revolution was because of steam engines and the pressure created by boiling water. Guess you didn’t do physics at school
@mauss1986
2 жыл бұрын
if youre gonna break anything let it be records 🙃
@SmartAceHole82
2 жыл бұрын
@13:49 THAT's IT!! that's why kids are so soft now-a-days. They never had to hold the torch for their dad because he had one of those.
@justinranes3351
2 жыл бұрын
Oh man, I’m dreaming of re wiring my entire car with a PDM along with my ELITE 2000 but I ain’t a wiresman 😭
@williamhardes8081
2 жыл бұрын
must have outputs for sub and air horns!!!!!!!!!!!!
@NearCry91
2 жыл бұрын
9:46 Only 7 positions? You're not thinking in binary.
@James-dx9ho
Жыл бұрын
The NSP software really needs to be updated to match what your competitors are able to do. Why can’t I use the same keypad input for two outputs without having to hack a rotary trim output. E.g. if I have 2 thermofans and I want to run them at 100% after a race I can’t do it with 1 button. Same with the wipers, fuel pumps etc You have introduced shock pots in the software but they aren’t available on the v2.35 CAN protocol. Why are the number of Generic Inputs and Outputs limited for Elite ECU products? This limits the number of potential circuits able to be run from the PDM. I assume it’s due to the lower processing power but I could switch on every single sensor in the software and it would still run. Why not just have 10 extra generic inputs and outputs that are only available if they will actually impact the processor with the current sensor selection. Surely there is processing power not being utilised because it is allocated to sensors that aren’t used. The Haltech forums have been offline for days. Is there any plans to fix this?
@haltech
Жыл бұрын
The Haltech forums have been closed permanently, I'm sorry. Please contact our tech support team via www.haltech.com/contact-us for your other queries.
@James-dx9ho
Жыл бұрын
@@haltech any reason why?
@jesus_built_my_hotrod
2 жыл бұрын
20 minutes of haltech benny goodness
@coreycarpenter2489
2 жыл бұрын
fark, has it really been 5 years?!?
@haltech
2 жыл бұрын
time flies...
@rod.h8064
2 жыл бұрын
Technically MCM and Rob Dahm sent me here....
@haltech
2 жыл бұрын
Welcome:)
@Jake_Hamlin
2 жыл бұрын
Why doesnt Benny Bite the Bullet and buy a Nexus?
@haltech
2 жыл бұрын
The Elite works fine for the time being - but you're right the car will probably end up with a Nexus eventually:)
@Jake_Hamlin
2 жыл бұрын
@@haltech seems weird to remove and/or prioritize sensors when inevitably it will have a Nexus. I know they're pricey but the car is snowballing fast. Buy once, cry once?
@haltech
2 жыл бұрын
Yep, you're not wrong, Benny obviously had other short-term plans that were more pressing than installing a Nexus but we're told once the car is back from the Drag Week it'll be due for more upgrades.
@wobblysauce
2 жыл бұрын
It is an evolution of a product, while yes it can... it was working with it not being an issue.
@BennysCustomWorks
2 жыл бұрын
@@Jake_Hamlin I have an R5 ready to go but because Dragweek crept up on me we’re running the 2500. I currently have all the data I need but it will be cool to add more sensors with the R5
@hoonaticbloggs5402
2 жыл бұрын
What is darda ?
@BennysCustomWorks
2 жыл бұрын
It’s like Data but down under.
@bvward
2 жыл бұрын
@@BennysCustomWorks Unlike doo-dah, which you get in the Southern US.(Camptown ladies sing dis song, Doo-dah! doo-dah!)...
@anthonyexton7243
2 жыл бұрын
Davo is the best
@TravisAndrew1
2 жыл бұрын
SHOULVE PUT A 2J IN THAT CAR IT WOULDVE BEEN FASTER
@napalmholocaust9093
2 жыл бұрын
Changing the thumb made me click again. Is that the purpose? To make people unhappy? Congratulations. Unsubscribed. Should fire everyone but Scotty anyway. Especially the chump playing F'n tricks with the thumbnails.
@haltech
2 жыл бұрын
Most KZitem channels load a couple of different thumbs when making a video live and let the algorithm decide which one works better. It takes a couple of days for it to settle on the one that's getting more clicks. It's unusual that you'd get served a different thumb if you've already watched the video though, but it's something we can't really control. . . PS We have all submitted our resignations as per your suggestion. Waiting for a reply from the management.
@haltech
2 жыл бұрын
Hi! New KZitem guy here! We're going to start trialling three or four different thumbnails per video from today :-D
@p9raceway759
Жыл бұрын
@Napalm Holocaust why you so mad ? Your cat shit on the floor ?
@MattyEngland
2 жыл бұрын
Which one of you boys ran over Skippy?🦘..... That was when the world started going to shit!
Пікірлер: 108