Powers up... after about 2 mins the power seems to cut out and it shuts off. Then the POWER light flashes red a couple times then goes to solid orange.
@kosaraangelova6252
3 жыл бұрын
My projector lights work and doesn't signals problem but it isn't starting. No ventilator no light. How can I help it?
@Luistx22
4 жыл бұрын
Changed bulb and ballast - still same issue :( - blinking red lamp light power is green
@kevinhollinger2789
2 жыл бұрын
Mike, I replaced the bulb, but the Benq10000 shuts offs while trying to reset bulb in settings
@mikeb4839
4 жыл бұрын
projector plays content however it keeps checking for the source every once in awhile and then goes back to the movie,why is that?
@josephcurrie7080
3 жыл бұрын
Any idea what a solid red light on power. lamp and temp lights off
@harmhoeks5996
3 жыл бұрын
Can you test the projector with the lid off?
@threeminutesgospel6946
3 жыл бұрын
Non of the lights are on
@tracyp2321
2 жыл бұрын
How do you bring up the menu without the remote?
@rocktman81
3 жыл бұрын
What’s the issue if there are NO lights on. Not even the standby light. Yes I checked the plug/cable and the electrical outlet. Bad power supply maybe?
@piromaniac8
2 жыл бұрын
The cover to access the lamp has a plastic tab to press a switch. If that tab is broken/melted it may not be pushing the switch.
@dipileshdipi9437
2 жыл бұрын
Could you please share with BenQ catalogue please
@dipileshdipi9437
2 жыл бұрын
Power light on and stand by light on every time stand by note release could you please tell me the complaint
@johnnyfive1510
4 жыл бұрын
My projector has probably over 50k hours on it now and it is starting to play up. It all seems to work properly but when I shut it down it has started to loose my settings to things like projector position lamp power and other settings are reset to default, thinking it was a CMOS type battery I opened it up found a few bad caps that I replaced but cant really figure out how it retains the settings, also the other day my remote stopped working the only thing that fixed it was shutting it down and unplugging from power then rebooting it, It sounds a bit like a mainboard problem to me but want to know is there any chips/caps/regulators etc you would suggest I look at for fixing the most annoying 'loosing settings problem'?
@MrMrKingfisher
3 жыл бұрын
I have static red light on the lamp led... 😕 Can someone help? BenQ w1000
@zillionaireziad8673
3 жыл бұрын
My projecter says lamp is red and temp is good
@desert0bear690
2 жыл бұрын
Projector in my Geography class isn't working
@xatreyu
4 жыл бұрын
my benq w1070 is not turn on and its not on any of your mentioned symptoms. mine was the on button is green, the power is red, the temp is off and the lamp is off. any idea what is it? i havent opened and checked it yet but i replace the first bulb as the valast is not working
@connardman
3 жыл бұрын
I have exactly the same problem since this morning. Did you manage to sort it out?
@MusawirDayo
3 жыл бұрын
Same issue help
@xatreyu
3 жыл бұрын
Nop still trying to figure it out
@xatreyu
3 жыл бұрын
@@MusawirDayo so how did u fix it
@threeminutesgospel6946
3 жыл бұрын
If it does not Come on?
@srishtigarg4511
4 жыл бұрын
What to do in case power is red and temp is green ?
@johnnyfive1510
4 жыл бұрын
Did you watch the video? kzitem.info/news/bejne/0a6Znqlvn1-BZX4 Either replace fans or if it needs it clean it out. edit: or you might also be able to put it into high altitude mode to make fans run faster but cleaning it out is the most likely fix.
@muhammadnazimkhan5799
3 жыл бұрын
Pass word error, enter pass word
@TheChefComic
3 жыл бұрын
This was about as useful as a traffic light. Same colors too.
Пікірлер: 28