Even without cocking serrations you can still press check most berrettas because of the slide indentation at the front
@DonnyBrook762
4 жыл бұрын
The 92X Centurion ships with the steel guide rod. I bought the G series Centurion on GunBroker for 472, and the the trigger job in a bag for 165. I am totally happy with the package.
@MinhVu-in9iz
4 жыл бұрын
Was it hard to replace those parts yourself?
@mrweeby1961
4 жыл бұрын
@@MinhVu-in9iz Berettas are pretty easy to replace internal parts. Just watch any video on here.
@richardsveum8452
2 жыл бұрын
I added the Wilson Combat hammer to the trigger job in a bag and am amazed by the difference, cut the reset in half. definitely worth the expense.
@jodylivengood4061
Ай бұрын
The best way to press check a 92 with slide mounted decocker is to take your index finger and middle finger, place them on the levers while placing your thumb on the back of the tang and squeeze. It should look like you're using a syringe. This keeps you from going too far with the slide. When you let off either keep the gun on safe or disengage it. For the decock only model keep holding down the levers until the slide is in battery. This works with pretty much any slide mounted safety/decocker pistol as well.
@douglascuvillyed.s8211
4 жыл бұрын
You are by far the Beretta officianado of KZitem
@renerodriguez2364
Жыл бұрын
I have both of these guns…the 92X out of the box is a great gun out of the box!! I added a front night sight, skeletonized hammer and a G- conversion de cocker and it’s right there with the LTT minus the slightly better trigger on the LTT. My 92X does have front cocking serrations and is also RDO ready. I will carry the much less expensive 92X and keep my LTT safely stored…..
@maxfit68906
3 жыл бұрын
TBH, if I knew the X series was coming out, I would’ve never bought the LTT. Beretta fans should thank Langdon for coming out with the LTT because IMO this caused Beretta to re-evaluate the 92 series and upgrade the design. I have the X Compact G model on order. Great review!
@MinhVu-in9iz
4 жыл бұрын
Wow you are a major beretta fan! Nice review! I’m saving up for the 92x!l the 92x has a d hammer spring, so 16 lbs vs stock 92 20 lbs!
@DavidV4444
4 жыл бұрын
Truly outstanding comparison, i bought the 92X a few days ago and can’t wait to get it!
@alsmith7316
2 жыл бұрын
Nice comparison. A few things to add. I have heard Langdon agree that stainless barrels are generally more accurate. In a pistol with a 4-5" barrel this difference in accuracy is not really measurable. Looks and corrosion resistance are the real differences. For the 92X, while you do have choices to go straight vs bobtail grip, there are practically zero options for the wrap-around bobtail grip. No thin grips, no palm swell grips. Just rubber of plastic Hogue/Beretta grips. If you like the straight 1911 grip then you have plenty of options. If you do not, then you are limited and are better off with the LTT, or other 92 variant. Though, it sounds like some grip manufacturers are finally going to be making more options for the vertec/straight grip. Who knows when those will be available.
@richardfiedler2201
2 жыл бұрын
Excellent review !!! Hit all the important features & left me with no questions. Thank you.
@mrweeby1961
4 жыл бұрын
I have the 92X Centurion G model. It is all metal parts except the grips. Has the best stock Beretta trigger by far that I've felt (don't know about the M9A3 and 92X Performance). The only changes I may make are night sights and an Elite hammer.
@orr989
4 жыл бұрын
great video. i just wish the Langdon LTT came with 3- 17 round magazines and a 3 slot picatinny rail... and i wish the 92X came with night sights like the M9A3... but i guess we can’t have it all. lol
@tedsmyers6382
4 жыл бұрын
XS Express DTX Night Sights fit perfectly 👍
@jodylivengood4061
Ай бұрын
So you basically want a M9A3 with the LTT goodness. I know your comment was 4 years ago. But if you go on LTT website they have a lot of configurations that fit what you're looking for.
@champy1210
4 жыл бұрын
"Addict...gun-buying disorder!" 😂😂👍
@bobkriegisch2731
4 жыл бұрын
Oh can I Identify with that !!!
@PPISAFETY
Жыл бұрын
I've owned various Beretta 92 variants for 40 years now. My last one was an Inox Compact. A student shot it and fell in love, so I sold it to him This left me with no "Pizza Gun" (my pet name for Berettas) in my collection, and we can't have that, can we? Just about the time we started to hear about the 92-X, one of my law enforcement dealers put 92-X's on sale, with a particularly good price on the 92-X Compact. The non-railed version was under $500 USD including shipping. Since I have other guns with rails, I took a chance and bought one. This is a very impressive pistol and my favorite Beretta of the two dozen 92's I have owned. The gun came right out of the box with everything I wanted in a carry gun. Oddly enough, while I had read about the plastic guide rod, mine came with a blackened steel rod, confirmed with a magnet, and a sub eight pound DA pull coupled with a four pound single action trigger. Perfect. I still go back and forth on which grip I like better of the two supplied. I have been running the more traditional curved grip, and like you, love the texture. I was a Colt Commander guy for years, and love the look and feel of a full length grip with a slightly shortened barrel, but never cared for the look of the muzzle extension of the full sized Beretta 92 barrel. I had a bunch of the newer 17 round full size magazines, and installed one in the gun with an X-grip adapter. This takes on the look and feel of the old Centurion, which I loved, so that is how I carry it. Since I teach handgun classes and didn't have a DA gun with a safety to demonstrate, I passed on the de-cocker only conversion for now and left it stock. My 92-X Compact is unquestionably the nicest Beretta I've ever owned. I'd love to see the same gun come out in the Inox finish!
@ratjaw75
Жыл бұрын
Great video. Concise and well spoken. Love those Berettas.
@LAT-qk3vj
Жыл бұрын
I like your video and I like Beretta 😆New subscriber from TN. My 92x RDO has front cocking serrations.
@greenbudzzz
2 жыл бұрын
Thanks bro this really helped me narrow down my options. Keep up the content.
@ILKTTRZ
4 жыл бұрын
13:50 - 14:00 just enjoying that grip haha. I absolutely love this platform and I think the 92x centurion is going to be my first Handgun. Henry model X in .357 will be my first long gun I think as well😁
@larrydavis8088
4 жыл бұрын
Thank God I watched this video till the end! I was struggling SUPER hard with this very decision and my biggest beef with the 92 series has always been that big ass grip. I absolutely adore the look of the LTT (think Samurai Edge) I believe the X is gonna be the best fit.
@kyleengstrom4802
4 жыл бұрын
I have been thinking the same thing. I want the LTT because it looks more like the Samurai Edge. I like the price and grips better on the 92X. I'm not a big fan of the round trigger guard look.
@Room-qd7pl
3 жыл бұрын
Got mine last week. I have around 600 rds through it and couldn’t be happier. Still want that ltt though
@silverhorder1969
2 жыл бұрын
The barrel looks stainless but it’s NP3 coated which is a nickel Teflon coating that adds lubricity and protection. You can actually get an upgraded NP3 version from the one you have.
@JoeldFashioned
Жыл бұрын
Great comparison!
@davissantiago5177
4 жыл бұрын
Great comparison between both guns, I have watched your other videos with beretta apx. Great videos, keep up the good work
@JacksonWalter735
4 жыл бұрын
Yes a new video! Thanks for posting. Now I'm going to go back to watching the video.
@luigiquintarelli
3 жыл бұрын
Wonderful review Kyle, I really needed! Thanks a lot (from Venice, Italy) 👍🏻💪🏻
@strikerfired6242
3 жыл бұрын
I have the 92X performance model. Fantastic gun! You should pick one up. Best trigger pull of any of the beretta models.
@vkyle91x
3 жыл бұрын
Way ahead of you
@tedsmyers6382
4 жыл бұрын
I have a Beretta 92X Centurion 9mm, GR Model-Decocker Only, purchased from Europtics, with the following upgrades: XS Express DTX Big Dot Night Sights. Wilson Combat Hammer with WC #13 Hammer Spring. Wilson Combat Fluted Guide Rod, with WC #16 Guide Rod Spring (Extra Energy) for +P Ammunition. WC Silicon Return Spring. Cerakote Frame in Multicam Grey by Fox Fire Finishes. Olight PL-2 Valkyrie Tactical Light. Lok Thin Grips in Black, with Wicked Grip Custom Grip Screws (Black with Bright Ruby Gem). Mec-Gar 20rd. Magazines with Hornady Critical Duty 135gr +P (FBI Loads). It’s a “Nail Driver” 💥 BTW: I have a LTT Beretta 92X Compact with NP3, LTT Trigger Job, with Rail, on order with Langdon Tactical. That’s not a Stainless Steel barrel, it’s a Beretta barrel with the NP3 Electroless Nickel Finish, which is part of the LTT Package 📦 The Langdon Tactical Beretta line up, has much more upgrades than what your describing. LTT Hammer, LTT #13 Hammer Spring, Guide Rod, Silicon Guide Rod Spring #14, just to name a few of the LTT line up internals... Lok Beretta Thin Grips are approximately $50-$60, & they’re Outstanding. Wicked Beretta Grip Screws are Awesome.😎
@benskiplo1081
4 жыл бұрын
As a Canadian I to feel your pain, check out Aztec armoury, A great company that’s an export/importer along the lines of irunguns. They sell the LTT drop in trigger kit and man what a difference.
@keithkent8126
2 жыл бұрын
Beretta must have been listening they added front serrations to 92x at least on my mine 2022 model . Short reset trigger and same old sights . I must change front sight, difficult for me to see , any suggestions? ( no fiber optic’s not a fan ) thanks K
@stephenjoy5021
Ай бұрын
The RDO version does have front cocking serrations.
@JW02828
3 жыл бұрын
I have to disagree with you on the barrel about stainless steel versus a steel barrel that's been blued. SS dissipates heat a lot quicker. Also SS take longer to heat up. SS is superior on corrosion protection because of the nickel property that's stainless steel has in it. SS will not need any extra treatment like QPQ or phosphate or nitrite etc. Also thanks for the in-depth video.
@Jose-mp4xf
Жыл бұрын
Nice guns dude, thanks for sharing,
@fredoflores4775
4 жыл бұрын
I may not agree with this review, but awesome review man, your videos are awesome keep up the great work
@MinhVu-in9iz
4 жыл бұрын
What do you not agree with this review?
@alwong604
4 жыл бұрын
I was ready to get the LTT, but I found out that it didn't come with the upgraded trigger. At $1600 it should. Pass. Great vid!!
@creaturecore13
4 жыл бұрын
There is no point to get the ltt from Beretta. Buying strait from Langdon tactical gets you the trigger job for the same price. Plus you have someone going through the gun that is going to know if anything is wrong with it before it goes to you.
@disco4535
4 жыл бұрын
The 92 Elite LTT Full Size is $1,164 from Langdon with his trigger job
@PHIllip324
3 жыл бұрын
5:48 I'm gonna disagree on this one. For starters, you should be using the slide release. Secondly, if you just grip the slide correctly if you do slingshot the slide, you should be pushing kinda-sorta up but not really (ie; not downward, like you press the decocker). I have never been concerned about accidentally turning on the decocker on my 92X Centurion.
@giusmaximus9586
4 жыл бұрын
Did not mention the greatest plus of LTT, the triger reset....speed.....
@judofry
3 жыл бұрын
Regarding the elite hammer, there is a video from Mosin virus where he explains his rationale for using it, for what I understand it allows you to have more reliable primer strikes with a lighter mainspring because the lighter mainspring doesn’t have to push a heavier hammer, so the elite hammer is moving faster but the benefit is reliable primer hits not necessarily lock time, his vid does a way better job, I think it is called reducing pull weight in a 92
@lidijabacic8348
3 жыл бұрын
beretta does not need front cocking cerrations. it has the slide shape to grab onto. beretta solved that front cocking issue back in 75 decades before it was even a thing.
@FoulPet
4 жыл бұрын
Thanks, this helped me decide. I held both and pulled trigger on both. Took the 92x home. it just felt better. I would like to improve the trigger reset. I am use to the SRT trigger on SIGs. Any recommendations?
@MrOhman86
4 жыл бұрын
FoulPet I believe you can send it back in to Langdon Tactical and get the trigger bar job. I’m used to the SRTs on the SIGs as well
@mrweeby1961
4 жыл бұрын
If you haven't done anything yet, you can buy a trigger job kit from Beretta or Langdon. Drop in parts and they work well. Combining the Beretta kit with a Langdon trigger bar give you a great trigger pull and very short reset, like a Sig SRT.
@FoulPet
4 жыл бұрын
@@mrweeby1961 thanks, I dropped in the trigger bar and it made a huge difference. May add other stuff later but ATM I'm happy with the reset. The trigger weight is fine for me and really see no need to lighten it. Reset is VERY short now and was a good investment for around $70 shipped even though I think that's a bit high for a single part.
@mrweeby1961
4 жыл бұрын
@@FoulPet Yep those custom parts aren't cheap but they work well.
@augustusheyliger6421
2 жыл бұрын
The new Beretta 92X RDO..has the XTREME Reset Trigger..very very short reset
@georgewashington7312
4 жыл бұрын
I want a 92x ltt fullsize!
@CrepeSuzetteDance
3 жыл бұрын
I think they do a "trigger-job in a bag" for the factory version.
@bryantrevino2757
2 жыл бұрын
Dude I love the safety decocker, but want to buy the G model so bad
@vkyle91x
2 жыл бұрын
It’s a worth while conversion kit to have done
@jodylivengood4061
Ай бұрын
I dont recommend the FS version unless you plan on carrying it on safe and disengaging it on the draw. Or if it is not a gun you're going to use for anything serious. One tip on taking the safety off. Use the exact same motion you use with a 1911. There are springs and detents in that safety assembly and very little pressure is needed to disengage it. Unlike a S&W 3rd generation or the Baby Eagle.
@bryantrevino2757
Ай бұрын
@@jodylivengood4061 but why, I carry my FS ready to fire with no issue....
@chrisf247
2 жыл бұрын
Great overview.
@mrdankie3953
3 жыл бұрын
Only thing I have anything too say is the accidental safety engagement is because you're applying downward pressure when cocking, that's nothing some training can fix.
@jodylivengood4061
Ай бұрын
I never had that issue. I used the 92FS for a while. Use the G model now. I was shown a way of gripping the slide with my thumb and index finger on the levers with some upward pressure. I don't do the overhand slide rack. I use the release lever or slingshot technique. Overhand on a Glock or 1911 with Novak sights is harmless enough. But on a Beretta not going to feel good. Overhand always felt like I had less control to. I've heard using the lever is fine motor skill and that's why it's bad. But so is the trigger and the magazine release. I did have to learn to hit the lever with my support hand after inserting a magazine. I had some super impressive reload times until I realized I hit the lever too soon a couple of times.
@jamessteers
2 жыл бұрын
Great review! Both are great guns. I do need to ask where you found those baseplates
@MikeRehfuss
Жыл бұрын
Check Springer Precision
@richarddower959
4 жыл бұрын
I have a 92X compact. I don’t miss the front serrations but do wish a could find an IWB holster!
@davebell7792
4 жыл бұрын
Great video, good job!
@stanleyhammer
3 жыл бұрын
Very informative Beretta videos, thanks. Have you tried Beretta’s new match aluminum triggers in the 92x?
@jayalexander7763
Жыл бұрын
So Question… I’m buying my first gun & I want a compact Beretta… out of all the 92 compact series which would you recommend I get?
@vkyle91x
Жыл бұрын
If the budget allows it I’d personally go the LTT
@jodylivengood4061
Ай бұрын
Well you may have to look but theyre out there and the prices are reasonable. But my choice for a 92 compact would be the M9A1 Inox. The two new 92X compacts are also cool. One of them has a smooth front dustcover.
@michaelanthonyanderson4404
4 жыл бұрын
My 92x came with a steel guide rod in it already
@keyhole9601
4 жыл бұрын
Full size??
@gnawty4662
4 жыл бұрын
Is the mag release reversible (for lefty’s)? Great video. Well don’t with the detailed close ups.
@RickNethery
4 жыл бұрын
Yes,it is.
@carolannesparkman6938
3 жыл бұрын
Nice video! 👍
@joespeed1952
4 жыл бұрын
Question. Would you recommend a full size, centurion, or Compact 92X for a first handgun? Also, How can you afford not only an LTT tactical, M9A3, and 92X?
@vkyle91x
4 жыл бұрын
joespeed1952 I’d say go the full-size for a first gun it’s always great. And affording it isn’t really that hard. You just save up and budget
@johns1625
2 жыл бұрын
I got the 92x full size as my first full size handgun and absolutely love the damn thing. I've shot lots of other handguns but it's the only one that I really love. The only difference between centurion and full size is price and a metal guide rod and mag release. You can get the 92x full size and replace those two parts and save about 90 bucks though.
@UziNineMillomeetah
4 жыл бұрын
Man I need that LTT!
@diegocadenas1778
3 жыл бұрын
is it worth to add the trigger job in a bag from ltt to the 92x???
@MrOhman86
4 жыл бұрын
Great video comparison!
@beastofburden7299
2 жыл бұрын
Hi, where do you buy that red mag pad?
@PsyKotyK
2 жыл бұрын
I really want a 92x compact but they havent came to canada , jow do you feel about the px4 ?
@boomee78
4 жыл бұрын
Man love your beretta videos i think i want one of these now im a longntime glock shooter and i want to learn da sa a bit. Trying to figure out which berretta i should buy m9a3? 92x full size centurian compact? Lttt version?
@vkyle91x
4 жыл бұрын
boomee78 personally I would do everything I could to push you towards the 92X full-size or centurion
@AGC828
2 жыл бұрын
Why don't the LTT guns come to Canada with the LTT trigger work? Would that be the same for the Wilson Combat 92G guns? We can get the WC Centurion. Can we not buy the LTT trigger kit and have it installed? Any one have this done? I'm not sold on the LTT guns. Looks mostly cosmetic with superficaial upgraded parts. e.g. trigger kit. Nothing revolutionary. Though, I think LTT's g 92's were the first to feature RDO's. Will give him that.
@lb0193
4 жыл бұрын
I couldn’t decide wether to get the night sights or not on my Elite just went with the fiber optic for now
@healthyhappyhero
4 жыл бұрын
lb0193 the front night sight (Spartan) is pretty wide compared to the fiber optic. Having a thinner front sight is better for punching paper.
@TJ-ji4gn
4 жыл бұрын
One of these will be my next gun. 92X makes more sense for me but I just can't get the LTT out of my head. I hate that in the back of my mind I would feel like I settled for the less expensive model.
@vkyle91x
4 жыл бұрын
T J I would never think that! They’re both amazing guns and in reality one isn’t way better than the other. Just comes down to what you can afford and what you’re doing with it
@designated_hitter_EGA
2 жыл бұрын
You received no safety gigs from tactical youtuber about flagging your hand in the first couple of minutes of the your video. Must be a record.
@Tvbgt7899ttgh
4 жыл бұрын
Berett 92x performance? You said you buy all the berettas so what about the performance? Will you be picking one up? I know there quite expensive here in Canada at $2k
@vkyle91x
4 жыл бұрын
Red Star I did end up picking on up, posted the review of it vs the standard 92X
@ChaohsiangChen
3 жыл бұрын
Can I put a 92X slide on an M9A1 frame?
@jodylivengood4061
Ай бұрын
Yep. Works fine. The 92A1 and the 96A1 are the two models that differ in dimensions to the rest of the 92 line. If you get a brigadier slide make sure you also get the brigadier slide release lever. Thay slide is slightly wider and the standard slide stop won't lift or otherwise function. Found that one out the hard way.
@livinthelegacy100
4 жыл бұрын
I have the 92X Centurion G model and it came with a steel guide rod. Don’t know if the size and/or model had anything to do with that or just got lucky
@keyhole9601
4 жыл бұрын
Not luck indeed.... plastic guide road are available only for full size models .
@hektoriuz
3 жыл бұрын
the ltt barrel has a different type of crown for accuracy.
@hanzo8134
4 жыл бұрын
I just bought the 92x brand new and mines came with decocker only so that's a good thing right?
@ethan532
4 жыл бұрын
Most people would say yes its a good thing, but it really just depends on your personal preference.
@MinhVu-in9iz
4 жыл бұрын
Some rather have the safety decocker but it is ready up to you, and your taste!
@boomee78
4 жыл бұрын
Can you compare the ltt and 92x vs the m9a3 im thinking of getting my first beretta not my first pistol.
@healthyhappyhero
4 жыл бұрын
boomee78 biggest difference is sight and grips. Fiber optic vs night sight.
@kathleenmusiclvr7663
4 жыл бұрын
What is your SA pull weight ?
@KaneGregory
2 жыл бұрын
I wish the barrel was black I think the 2 tone looks silly!!!🤯🔫🃏
@davidvermont
3 жыл бұрын
What number and size of magazines come with each?
@williamjohnson7659
3 жыл бұрын
what you guys save in health insurance over the U.S. You could buy 10 Berettas...
@RedPillsbury
4 жыл бұрын
Does anyone know what holster will fit a full-size 92x??
@joshuamadread3678
4 жыл бұрын
How's the accuracy compare between both guns? Some people say the 92x shoots slightly off?
@vkyle91x
4 жыл бұрын
They're both bang on for me
@simnikiwegaleni7667
4 жыл бұрын
Are the grips on the Beretta 92X rubber or plastic?
@vkyle91x
4 жыл бұрын
Simnikiwe Galeni plastic
@nvhs1
4 жыл бұрын
LTT offers a 92x centurion w/trigger job just as an fyi
@creaturecore13
4 жыл бұрын
I have this with the np3 coating and night sights. Without the coating it's one hell of a deal. $850, pretty much the same price as the normal centurion but with an amazing trigger.
@chaerichardson1147
4 жыл бұрын
Can you tell me where you got the base plates??
@vkyle91x
4 жыл бұрын
Stoeger canada
@DirtyNate98
3 жыл бұрын
have you tried any of the wood grips Beretta offers?
@vkyle91x
3 жыл бұрын
Look nice not functional at all
@DirtyNate98
3 жыл бұрын
@@vkyle91x gotcha, even the ones with the checkering would you say? I love the look but I'm not sure its worth it.
@vkyle91x
3 жыл бұрын
@@DirtyNate98 tried a few they weren’t great in my opinion
@DirtyNate98
3 жыл бұрын
@@vkyle91x thanks for your advice👍
@sr7138
3 жыл бұрын
Which one do you like better?
@billyboatman
2 жыл бұрын
Can anyone tell me what the Centurion designation means?
@vkyle91x
2 жыл бұрын
Full-size grip compact size slide
@billyboatman
2 жыл бұрын
@@vkyle91x Thank you!
@floridaman2568
4 жыл бұрын
I just got the LTT for $989, just FYI
@vkyle91x
4 жыл бұрын
Florida Man I’m in Canada.
@floridaman2568
4 жыл бұрын
@@vkyle91x Ah, I'm sorry brother.
@josephpeterka2311
4 жыл бұрын
Want to sell your safety de-cocker?
@vkyle91x
4 жыл бұрын
Joseph Peterka nah I keep it all
@kellyschafer8873
4 жыл бұрын
Won't matter they will be prohibited soon enough
@vkyle91x
4 жыл бұрын
Well with thinking like that they sure will be! Stay positive Kelly the CCFR and many organizations are fighting hard for us right now
@kellyschafer8873
4 жыл бұрын
@@vkyle91x yah I agree sorry hard to be positive when half of the guns in my safe became prohibited over night so unfair I just bought a typhoon f12 only fired 8 rounds through it !!!!!
@vkyle91x
4 жыл бұрын
Kelly Schafer I’m that that boat as well it sucks, but key to remember is 2 years is a long time and a lot can change. The fight ain’t lost till its lost!
@DonnyBrook762
4 жыл бұрын
Either way, mine was lost in an unfortunate boating accident.
@RickNethery
4 жыл бұрын
Now, heck firearms are flying off the shelf like crazy. Even die hard liberals are arming up.
@Joe-ff6tk
Жыл бұрын
you have a slide release for a reason why the fuck would anyone overhand on a reload?
Пікірлер: 141