Thanks! Took some practice but angling the watch while holding the tweezers still is definitely the way to go.
@robocopvn
Жыл бұрын
I have the tweezers, but I don't have any Rolex to practice on!
@DavidPhamChannel
Жыл бұрын
They are probably good for lots of different brands. What are you using them on?
@robocopvn
Жыл бұрын
@@DavidPhamChannel if you get my joke, thank you!
@ericchang9568
3 жыл бұрын
I wished I had seen this earlier 😭. I use a bergen 6767 and end up scratching my watch when trying to put on a rubber b strap. I think I might have also twisted my springbar because I put in one side first before wiggling in the other side, unlike the 7285 you can apply force evenly on both sides without twisting.
@DavidPhamChannel
3 жыл бұрын
These tweezers definitely have changing Rolex bracelets a lot easier.
@user-qh7mv8np2s
24 күн бұрын
I should have watched this before using a cheap spring bar remover that scratched the lugs of my airking. I have just ordered that tweezer you used in this video.
@DavidPhamChannel
24 күн бұрын
Sorry to hear that, these will work perfect for your watch.
@julienholmgren1543
3 жыл бұрын
Great. I need to buy this tool; I've removed the bracelet on my air king and now I can't put it back with a simple bar tool.
@DavidPhamChannel
3 жыл бұрын
The tool will definitely help. Good luck, just go slow.
@stegeorgy60
3 жыл бұрын
I have these and can concur that for Omega this is poor as it is difficult to grip the spring bars successfully. Reverted back to Omega tool. Feels like the v cut in this tool is way too small for Omega spring bars. Annoying since I purchased for strap swaps on Omega.
@genericusername9551
13 күн бұрын
Switch your spring bars to Rolex style bars
@icychap
Жыл бұрын
Thanks for sharing, but unfortunately you didn't show the most difficult part - how to access the spring bar when both sides of the bracelet are attached to the watch. When one side is detached, access is very easy.
@DavidPhamChannel
Жыл бұрын
You are right I didn't, apologies. Didn't think it was too different. I just open the clasp and push the skinny part of the clasp over the lugs so its easy to access the spring bars. Its basically the same thing after after that point.
@icychap
Жыл бұрын
@@DavidPhamChannel Thanks. Yes, I was able to find another video (Millenary) which demonstrated. Thanks again for the video.
@dezmarinvestmentsllc9964
Жыл бұрын
Agreed 100%
@Harry_16710
3 жыл бұрын
Great "how to" video. Thanks!👍🏼
@DavidPhamChannel
3 жыл бұрын
Glad you enjoyed it!
@dereksbooks
4 жыл бұрын
Nice tip 👍
@Barry-26
3 жыл бұрын
Thank you
@DavidPhamChannel
3 жыл бұрын
You're welcome
@jasonwalsh9211
4 жыл бұрын
Nice demo,.thank you
@flipmode45
8 ай бұрын
Great video 👍🏻 appreciated!
@DavidPhamChannel
8 ай бұрын
Glad you enjoyed it!
@Timjacks01
Ай бұрын
Do they produce one for the omega?
@DavidPhamChannel
Ай бұрын
Not that i know of, its kind of spring bar specific. If you decide to use rolex springs bars on a Omega it will probably work.
@dougharlow6037
9 ай бұрын
Will the (Bergeon 7825 Spring Bar Tweezer Lug Removal Fitting Tool) remove the 2004 Rolex Datejust Turn-O-Graph 116263 with the two tone Jubilee bracelet?
@DavidPhamChannel
9 ай бұрын
I don't know for sure but i don't see why not, as long as the spring bars have collars to grab on to it should work.
@marcn8750
Жыл бұрын
Can’t you just change the spring bar to a double collar one for the Omega? After market … 🤔
@DavidPhamChannel
Жыл бұрын
You may be able to but I never looked into it. Omega springbars are considered the highest quality and didn't want to use any generic springbar. I'm sure an equivalent Rolex spring bar would work just as well but again never looked at sourcing them.
@marcn8750
Жыл бұрын
@@DavidPhamChannel noted thanks. I don’t think one has to worry so much about the “highest quality” of spring bar. And as you said, a a Rolex double collar spring bar will be fine too. Just saying that this is way too much stress over a spring bar. Appreciate your video. It should be easier to remove an omega bracelet and at a minimum … a double collar.
@oddpout
3 жыл бұрын
Quality of spring bars indicative of the brands x)
@the.magnus
3 жыл бұрын
Do you recommend using a normal springbar tool on the omega compared to this tool that pinches both sides at once?
@DavidPhamChannel
3 жыл бұрын
I recommend the Bergeon 6767F for the Omegas.
@francisingua12
4 ай бұрын
@davidpham is this for datejust 42
@francisingua12
4 ай бұрын
@davidpham is this for datejust 41
@DavidPhamChannel
4 ай бұрын
Yup DJ41
@skicrz
Жыл бұрын
Can Rolex spring bars be substituted for Omega's
@DavidPhamChannel
Жыл бұрын
Probably, I've never tried myself but they appear to be similar in thickness.
@u.u.u9969
Жыл бұрын
Do the tips break easy?
@DavidPhamChannel
Жыл бұрын
No, Bergeon makes solid stuff, be careful they can scratch your lugs if you are not careful.
@davehan241
3 жыл бұрын
Thanks for the great tips. Hmm, how did you get the first side of the bracelet off both watches? I was wondering if the shape of the Bergeon 7825 allows you to remove a spring bar when both sides of the bracelet are installed?
@DavidPhamChannel
3 жыл бұрын
Yes, correct. With the 7825, you are removing both spring bars at the same time.
@sak1xsak1
2 жыл бұрын
I detach the clasp from the center off first, then move onto either side of the lugs.
@theLabradorite
4 жыл бұрын
This wouldn't work with older rolex watches with lug holes right?
@DavidPhamChannel
4 жыл бұрын
Possibly, as long as they have the same spring bar and the opening is the same size or larger it should work.
@davidkaplan5517
3 жыл бұрын
What tool do you recommend to put a RubberB band on a Rolex steel watch?
@DavidPhamChannel
3 жыл бұрын
These tweezers should work but if you are looking for a spring bar tool use the Bergeon 6767F.
@artagain8977
4 жыл бұрын
What tool would you recommend for the Omega spring bars? I have a typical spring bar tool but it’s still really difficult.
@DavidPhamChannel
4 жыл бұрын
I haven't used other versions of the tweezers so I can't comment on those. For me the standard bergeon tool works best.
@KiwiMoto72
2 жыл бұрын
Do you recommend this for adjust the strap on Rolex too?
@DavidPhamChannel
2 жыл бұрын
Should work if the straps have indents where you can easily access the spring bar.
@KiwiMoto72
2 жыл бұрын
@@DavidPhamChannel thx you David! how about Omega? work too? thanks again!
@DavidPhamChannel
2 жыл бұрын
@@KiwiMoto72 no probpem. I'd use a spring bar tool with the Omegas
@carzakone333
3 жыл бұрын
What about Tudor?
@DavidPhamChannel
3 жыл бұрын
I have no idea, never tried it with a Tudor.
@resjon7981
2 жыл бұрын
It works a treat on Tudors once you have practiced a few times.
@osobad1127
Жыл бұрын
How much is this tool?
@DavidPhamChannel
Жыл бұрын
If i recall maybe 200
@desireless4092
Жыл бұрын
Watch head? It's THE watch.
@DavidPhamChannel
Жыл бұрын
haha you're right.
@baba98052
Жыл бұрын
You don’t start from beginning. Watch strap is already disconnected.
@DavidPhamChannel
Жыл бұрын
Its easier to demonstrate the tweezers with one side of the bracelet disconnected.
@charlesmills8854
Жыл бұрын
This would be great if you showed more and talked less AND if it was accurate. My Rolex does not have the same header links and no holes to easily access the spring bar
@bas4241
4 ай бұрын
Nice tool, but ridiculously overpriced! There are other cheaper options.
Пікірлер: 67