Man that ending really "Triggered" me! ........but seriously thanks for sharing Matt.
@TheRealDealAirsoft
3 жыл бұрын
Lmfaoooo And guys for those that are seriously curious about performance and are considering mosfets come check out a new company that we are working with Perun. Come check it out @ The RealdealAirsoft
@alextatkin1026
3 жыл бұрын
Pro tip on those ASG springs. If youre using a swiss-cheesed piston, youll want to remove the paint because over time, it will flake off and make a mess in your cylinder. Use a lighter to heat the end of the spring and the paint wipes right off.
@chicacherrycolalime
2 жыл бұрын
Thank you :)
@brandonblomme7797
5 ай бұрын
Darn it!!! I just slapped one in a Echo 1 AK RIS that doesn’t have quick change
@Ferrari255GTO
Ай бұрын
Wait, wouldn't using a lighter change the properties of the spring? Good ol' paint thinner should be more than enough
@alextatkin1026
Ай бұрын
@@Ferrari255GTO LMAO, not how it works. Youd have to get to begin to glow to change the hardness. Its a complete and total non issue in this application.
@Ferrari255GTO
Ай бұрын
@@alextatkin1026 ohhh, aight. I remembered hearing something but wasn't fully sure about it
@OctaneGroup
3 жыл бұрын
Don’t pair a metal piston head with a metal cylinder head. That can crack gearboxes fast
@scon3s619
3 жыл бұрын
Been told steel gears with a polymer toothed piston is the best combo
@asher8085
3 жыл бұрын
@@scon3s619 that’s what I’ve learned as well, metal piston head and cylinder head together can cause issues. Never had experience with cracking per say, but the inside of my friends Classic army gearbox looked scratched up to all f**k inside when he opened it up after having issues with his full metal set on the field a while back. 🤣 not pretty to say the least
@OctaneGroup
3 жыл бұрын
@@scon3s619 steel rack piston works just fine, no real need for polymer piston
@scon3s619
3 жыл бұрын
@@OctaneGroup it’s more if somethings going to fail it’s easier to change out a pistol than a full set of gears and having to reshim them
@OctaneGroup
3 жыл бұрын
@@scon3s619 true but if you build your gun right those two parts will literally never fail.
@thexenobunny
3 жыл бұрын
There be days when the EMG custom guns go on sale and I am so close to clicking buy, then I see the fps is 550 and I wonder just who are they making this thing for? Its as if they designed it to require even more modification.
@luvstofap
3 жыл бұрын
It's for Canadians because they have a minimum fps requirement in order for it to be legal.
@tjl8372
3 жыл бұрын
@@luvstofap Anything over 500 is actually considered a firearm and cant be used for airsoft and you require your firearm license to own it.
@bootsontheground4913
Жыл бұрын
My buddies and I play on a massive 80 acre field and the average engagement distance is in the 75-150yd range, so 550 is quite helpful
@spiranomad
3 жыл бұрын
Ah yes. I am also a fan of well supported racks.
@mikemegadeth4110
3 жыл бұрын
I only ever use polymer piston heads if they have a metal core. As my own personal tech I refuse to use plastic screw threads ever again!
@BrickZOfTheDead
3 жыл бұрын
Is it possible to make a videos of the loadouts of the Evike staff?
@whitmills6691
3 жыл бұрын
They have some stuff like that on their insta
@doodlesgotskillz101
3 жыл бұрын
The jefftron leviathan is also a really really good trigger board.
@mrrootbeerguy1280
3 жыл бұрын
I remember having to try 3 different cut off levers because nothing seemed to work in the drop in gearbox I bought, then I just got a new gearbox from a gun my friend didn't want and I haven't had issues since
@ondrejkott3589
3 жыл бұрын
7:06 I think you can also mention the leviathan v2 optical unit which have more functions like doubletrigger which is awsome ( especialy in semi only battles :)) ) and it have precocking function also activ brake, full adjustable burst mode, settable delay between shots, let you select fire mode on all selector positions ( like safe ), corectable RoF, 100A fuse, real trigger felt like on real gun ( also adustable mechanicly ), auto diagnostic mode for cycle time and showing info about precocking time, semi cycle time auto cycle time, motor start/semi/auto current which is the best thing that can tell you alot about problems with shiming, lubing , motor power, right gears ratio , if you have so strong spring and etc. For eaven more info it shows the mosfet and processor temperature, batery capacity and its real voltage in real time. It also have the bluetooth connection so you can change your settings during few sec eaven in battle using any Android or IOS phone. Also keep stats like fired shots and etc. I the app is also auto debuging program which inform user about owerspinning, high mosfet currents and it will notifi you with motor vibrations about low batery cap and high temp as i mentioned before. And that all come for cheaper price than Titan and also with prefactured trigger in 6 different tipes which you have to chose before purchase. Also good wires and preinstaled next gen dean conector so its ready to go out from the box. Its also suitable for both tork and speed motors ( i prefer tork + diual sector gears 18:6 (shs) and 150+ spring which give you more power and also keep pretty good RoF. ( i am not playing CQB and mostly shooting at 70+ m with RoF +- 30rps. which is insane ) ( if someone wana help upgrading AR15 or M4 lett me know i can tell that in this case best buy will be specna arms body which is low cost but good quality and replace all internal parts but you can keep the GB shell which is also good inaff ) barrel - prometeus, hop chamber maxx sport, piston head maxx sport 2rings, as i mentioned gears i prefer most is shs18:6 dual sector gears with comb with high tork motor and also 150+ spring which can the GB shell handle pretty well without any drilling to lower the tention, also dont forget to buy good rewerse lash (cnc for best) and full metal teeth piston ( lighter = better or you can drill out some material from it. ) Thats pretty all that i can sugges. For more info just ask. :) I am also want to know if you have some ideas about how do you change this setup to make it eaven better so just lett me know if you have any suggestions. Also thanks for that video. I already know most of the info but its werry nicely and simply sayed and i also learned something new :)) Good Job man. Good Job.
@evikecom
3 жыл бұрын
Thank you!
@drewmurray6480
2 жыл бұрын
I'm running the v2 in some of my gel blasters but the optical leviathans have recently hit the market and i can't wait to get my hands on one atleast
@-navi5238
3 ай бұрын
Recommending a dsg to first time builders is a horrible suggestion. They will have to deal with a lot more problems pme, tappet pme, timing issues etc. also the stock specna Orion gearbox will not last very long with an m150/sp150 it’s only rated for m120 with stock internals. Currently all you need for a solid 28rps build is shs 13:1, Perun hybrid, 22-28tpa motor. It will last longer, is easier to build and doesn’t require a stupid strong spring. Also lambada barrels are better than prommy
@lisdexik5484
2 жыл бұрын
Mo' O-rings, MO POWA BABY!
@joshuaboos9694
3 жыл бұрын
Can you do a video about how to upgrade a basic M4 with $50, $100, $150 and $200?
@evikecom
3 жыл бұрын
In part 1 (link below) we mention the first upgrades we always recommend: Bucking, Barrel, Hopup Chamber. If you follow the order of upgrades in both of these videos, you can get a feel for the general order in which we recommend you upgrade your AEG. Just remember that there's no one 'correct' way. Part of the fun is making your own path! kzitem.info/news/bejne/o5lqr4maoJeIZ3o (edit)
@wannacry5188
Жыл бұрын
can anyone share a full upgrate list for Krytac Barrett REC7 ?! top picks
@jackmendes5634
3 жыл бұрын
More like this pleae
@pabloserrano873
3 жыл бұрын
What about HPA parts or gas blowback part.
@codemy666
3 жыл бұрын
idk about HPA but GBBs don't really have that many upgrades that you need, NPAS is a nice to have thing but also comes with the higher end GBBRs, most mods on GBBs involve alot of subjective things like gas efficiency or heavier recoil, depending on the users's wants and needs... and barrel/hop up upgrades are the same for all of airsoft guns i imagine, just GBBs have their own seprate stuff that isn't compatible with AEGs sometimes
@codenamesquash6817
3 жыл бұрын
Evike matt the airsoft equivalent of Jesus
@adamkyle2061
3 жыл бұрын
I just got back into airsoft after being out for a decade. I never got into upgrades when I played in high school, and now that I have a G&G Combat Machine M16, I'd like to put in some upgrade parts. Primarily a better spring, hop-up system, and longer barrel. Is there a way to figure out what parts are compatible and what parts aren't?
@evikecom
3 жыл бұрын
Hello! Welcome back! The good news is that there are a TON of aftermarket parts for airsoft M4's (like the G&G combat machine). Follow these links for compatible parts, and you can always email tech@evike.com for advice! Ver 2 Hopup units - www.evike.com/shop/28/24/71/371/ AEG Inner Barrels - www.evike.com/shop/28/24/1196/ AEG Springs - www.evike.com/shop/28/24/611/333/ (If I may make a recommendation - get a higher quality inner barrel but not longer than 363mm [trust me it's the longest you'll need], Invest in the hopup unit and bucking, and don't go above a 120 spring unless you also upgrade the motor and have an 11.1v battery)
@briantopor4092
3 жыл бұрын
Give it up Matt
@EMPERORSPROTECTION-TERRA4LIFE
3 жыл бұрын
Great videos. Thanks.
@GladlyKillmore
3 жыл бұрын
Pizza, french fries. If you french fry when you should've pizzad, YOURE GONNA HAVE A BAD TYYME.
@deobob
2 жыл бұрын
Does evike ship to the UK
@richardmorgan2872
3 жыл бұрын
That looks like Umbrella armory hope unit
@mitchellsheridan5252
3 жыл бұрын
They use prowin hop ups.
@warzanestuff8836
2 жыл бұрын
Man I love your vids not so much the shipping speed.
@evikecom
2 жыл бұрын
Hello! We do apologize for any delays in processing and shipping orders. We are operating as fast as we can as safely as we can. The health and safety of our employees takes top priority above all else. Please follow this link for more information: www.evike.com/evike-covid-19-hub/ Please also understand that even after we have sent an order there may be additional delays from the carrier that are out of our direct control. We thank you for your patience during this time. We will return to our normal exceptional processing time as soon as we are able. You can always contact us directly if you have any questions about your order: support@evike.com (626) 286-0360 7:00am to 5:00pm PST Monday through Friday www.evike.com/policy/ www.evike.com/faq/
@lenuttt6082
3 жыл бұрын
I have a CYMA Platinum SR-25 14.5" and I'm wondering what I should put into it. I run it as a DMR platform so any tips would be helpful. I'm also in the market for the CYMA Platinum M4 QBS 13" once it comes back in stock and I wan't it to perform well in all areas. Range, velocity, accuracy, rof, etc. I was thinking about throwing in the EMG/Maxx CNC Aluminum Pro hopup chamber, but I don't know what bucking and nub would work for it. Also maybe upgrading the inner barrel and motor are something I'm looking at. ^ I posted this comment on the last video and now I have some additions to make. For the SR-25 I mentioned, I want a lighter trigger pull, with a much faster response time, which I wonder if it's possible with the already quick response trigger it has. Same for the M4. For the M4 I want to have as short a trigger pull as possible since I have a quick trigger finger during semi auto use. For the full auto bits I want a high ROF and good gears and spring to match. I would like to switch the gearbox shell with CNC aluminum shell by EMG to match the hopup chamber, and if possible, a red flat trigger to replace the stock trigger. If you've got any tips or if you can come up with a list of things I need to make these builds great, that would help a lot.
@evikecom
3 жыл бұрын
Sounds like you're a player after our own hearts! We all love upgrading our AEG's. If you check out any of the 'Evike Performance Shop" custom guns on our site, you will find a list of components. Find one similar to what you want andn use that as your guide! - www.evike.com/search/?search_in_description=1&sort=3a&keywords=evike+performance&x=0&y=0
@richardmarkram8444
3 жыл бұрын
I prefer the Perun mosfet.
@ScoopsVids
2 ай бұрын
Top upgrade: Join the dark side and go HPA. As someone who refused to use anything other than an AEG for 8 years, I’ve could’ve saved myself so much more time, and money by eliminating the hassle of buying many parts along with several varieties of the same part from various manufacturers trying to perfectly mesh something together. It would be one thing if there was a standard on parts, but every manufacturer makes their tolerances just a little different, and you really won’t know if an upgrade part you buy is gonna end up working until you try installing it. What you’re left with when all said and done is an awesome AEG, a ton of extra parts that didn’t work for your build, and way less time on your hands. Yes, jumping into HPA can be expensive, but fully building out a high performance AEG can be just as expensive if not more expensive. They’re also a lot less reliable and will require much more maintenance due to their nature of having so many moving parts. In my personal experience, I field my HPA guns weekly, and in 4 years of ownership and use, all I’ve had to do is change o rings twice; both times being under a 2 hour job. For those of you who are new and are considering taking the plunge into the realm of “high performance”, I recommend continuing to use the current gun you have and save for a drop in engine; making sure this is really a hobby you like and wanna make financial commitments towards, rather than upgrading piece by piece. You’ll be saving a lot of time and energy working/researching the tech rabbit hole, to be used for more field time, or just overall time to pursue other life ambitions.
@jhondoe1483
3 жыл бұрын
11 top upgrades? thats a whole ass gun....
@Skeloton389
11 ай бұрын
Can someone make me a list of a high end v2 rear wired gearbox. Just make a list of the parts please
@insipidoaf
3 жыл бұрын
passports?
@scitzspace
2 жыл бұрын
I am building a one thousand dollar AEG from the screw up, and I was wondering. will your motor bounce around in your grip if it is to slim? if someone could answer this it would be very helpful.
@evikecom
2 жыл бұрын
You should get a slim grip for a slim motor. Otherwise, yes, you could run into issues with the motor not being very secure.
@drewmurray6480
2 жыл бұрын
Every grips different mate
@navarrekurtz720
7 ай бұрын
😂😂😂😂 mo molle throwback lmaooooo
@eezylost4651
2 жыл бұрын
So I got a aeg for Xmas and I want to upgrade it. What are the best parts for 300 All together?
@tikeetorch420
3 жыл бұрын
I think someone really likes epic meal time lol
@topher4050
Жыл бұрын
why we pretending there not an E on the end of evike? (eve-eye-ck)
@awetlittleguy5138
Жыл бұрын
Hello, I have a bolt m4 with the b.r.s.s. System. It’s seemingly getting worse and worse the more I use it and I’m looking into upgrades. I’m wondering if I may need to over compensate to make the pistons / brss system to run at its absolute best. Right now it jams up anytime I go into full auto so my idea of the build is a leviathan set to semi and binary only along with a better motor and 11.1 but my only concern is I haven’t seen anyone else build with the brss system and don’t want to add stuff and it still be jamming due to something I know nothing about. Which makes me want to remove it but then I lose the awesome recoil feel. Also I’m not even sure if it would run without it? I would send it to a pro but I want to learn more about this stuff so I can be the doctor of my group😂
@evikecom
Жыл бұрын
Please contact tech@evike.com with this inquiry.
@juliyantojuliyanto5952
2 жыл бұрын
Hello.. I'm in Indonesia. I had a really hard time getting the hop up bucking, nozzle, cylinder head, 19T high torque gearset and metal pistons with 19T gears. My unit is A&K SR25k. For now, I'm using the Lonex 70⁰ hop up bucking, spring SP120, 19T classic army piston with 3 piece metal teeth, lonex head piston with 6 holes. Nozzle, cylinder head & gearset still factory default. My fps is just 380.
@evikecom
2 жыл бұрын
Please email tech@evike.com for assistance with upgrades.
@airsoftagitator7110
3 жыл бұрын
Quick question of the stupid variety. Say I already have an aeg right. Am I able to send in my aeg and ask for things to be upgraded with parts that I have selected
@evikecom
3 жыл бұрын
Absolutely! Not a stupid question at all. Send an email to tech@evike.com for parts recommendations and to get the process started!
@bootsontheground4913
Жыл бұрын
I keep having issues with my AK's gearbox. I disassembled it and found now visible issues inside, so I really have no clue where to go from here
@lordchungas8882
2 жыл бұрын
I have the AGM/matrix MP-40 AEG and I’ve been looking into getting a faster semi auto ROF and quite possibly a hair trigger to speed that up abit more but don’t know anything about upgrading nor want to take apart my gearbox/gun in fear of not being able to put it back together again. Any good gears/triggers y’all can recommend?
@chaseeebomboklat
Ай бұрын
anyone got upgrade recommendations for a gng ssg? looking for fast firerate and trigger response
@newmommy413
2 жыл бұрын
What FPS would crack a version 2 LT series shell
@smorris227
2 жыл бұрын
Any recommendations for a threaded barrel for my umarex Glock 17 GEN 5?
@e-man1432
2 жыл бұрын
What spring will keep my gun under 450 fps?
@evikecom
2 жыл бұрын
Depends on the barrel length, cylinder, and compression efficiency. Please contact tech@evike.com for assistance and provide as many details about your rifle as possible.
@fishxfryed945
Жыл бұрын
I fell like dinky doo not o owing your guys upgrade aegs I'm slowly learning ever since I got my fal and mpx from you guys hope we can talk next time when pull the trigger on a new gun🙏🏼👍💯 do you guys accepts guns like one I already ordered from you guys, or how about a drop in kit for the j g fal I got I still haven't found a disassembly video either
@evikecom
Жыл бұрын
For technical assistance, please contact tech@evike.com
@knightairsoftwarrior
3 жыл бұрын
Thinking about going to upgrade my G&g cmf16k what would be good solid internals like gear ratio, cylinder, piston, nozzle, spring? I already got parts coming in like asg motor 35k, perun mosfet g&g++, angel customs tight bore inner barrel 6.03, prowin hop up, prometheus purple bucking.
@OtakuMeister
3 жыл бұрын
Will evike ever host a tech workshop?
@OtakuMeister
3 жыл бұрын
@Tankify, but full-fledged workshops that will teach you how to be a tech?
@OtakuMeister
3 жыл бұрын
@Tankify, I mean yeah but it will be flooded with differing opinions, it would likely cause a civil war in the comments
@rotarurazvan_petru4654
11 ай бұрын
Hi, I want to make a custom cnc steel v2 gearbox, just the gearbox, i ve seen some cnc gearbox's that are a tiny bit different, I just want the most fps possible for target shooting, what are you saing that I should put in terms of the spring, gears and motors and the the type of v2 gearbox in terms of cuts etc in the shel
@drewmurray6480
2 жыл бұрын
Just pull it all out and throw in a hpa kit
@dieschutzstaffel1514
Жыл бұрын
It’s like building a pc but for painful nerf guns
@archery30x
2 жыл бұрын
Does the drop in kit have any upgraded parts?
@Punisher_MrWick
3 жыл бұрын
What type of gearbox would you use if you used a Moffett externally with other gun you own Matt!
@evikecom
3 жыл бұрын
Matt says: "Honestly I'd probably use the factory shell until it breaks, regardless of version. In the past I've used Pro-Win split gearboxes. These days I'd probably get the EMG retro, just to rep the company. As for external MOSFETs, probably a GATE WarFET" - www.evike.com/search/?search_in_description=1&sort=3a&keywords=warfet&x=0&y=0 www.evike.com/products/18709/
@Punisher_MrWick
3 жыл бұрын
@@evikecom well I have sent a few emails to Evike and I need some work done! Just waiting to hear back! It would be cool to see a video of the work being done on it and what you think of the gun itself and who made it?
@evikecom
3 жыл бұрын
@@Punisher_MrWick Thank you. Please allow some time for replies to emails. If you need immediate assistance or just have questions, you can always give us a call. (626) 286-0360 7:00am to 5:00pm PST Monday through Friday
@Joemama-rt4vi
Жыл бұрын
12:1 gear ratio with 30k motor⁉️
@pokemonsong8400
3 жыл бұрын
Going to do a everything new vfc scar l high speed build any suggestions on complete compression inter. N gears/ motor. I’m def putting in the gate Titan in it
@JasonFolk07
3 жыл бұрын
Lol I new someone here was doing one of them. How you upgraded anything?? I was planning on changing my piston, motor, adding a mosfet, new shims, a new 120 or 125 spring, new trigger, almost the hole 9 yards aha
@Bodie-m6i
2 жыл бұрын
What are good upgrades for thr krytac kriss vector
@drewmurray6480
2 жыл бұрын
Where can i buy the kratos pistons if that's how you spell it
@evikecom
2 жыл бұрын
Angel Custom "KRATOS" Ultra High Strength / High Performance Steel Teeth AEG Piston - www.evike.com/products/80110/
@notimpressedbyyourm4932
3 жыл бұрын
Personally I think pistons aren’t meant to be upgraded because they’ll break before your gears
@whitmills6691
3 жыл бұрын
How about.... building your gun well so neither of them break at all
@opairsoft8100
3 жыл бұрын
Lol nope
@notimpressedbyyourm4932
2 жыл бұрын
@@whitmills6691 it’s airsoft everything wears down over time
@davidfaustino4476
Жыл бұрын
@@notimpressedbyyourm4932 not if it's built and maintained properly.
@smiley6388
3 жыл бұрын
Me being a mid tier tech just watching this for fun... Yeah I really need to get a life...
@aydynproa4987
2 жыл бұрын
do you know how i can make my hk 416 have a higher rate of fire
@noobtuber103
3 жыл бұрын
Can you do a more in depth video on the difference between bolt action snipers with cylinders and without cylinders when it comes to the wolverine HPA kit I get kinda lost on how to tell if I'll need to get the kit with cylinder or without
@josiahdeluca5908
Жыл бұрын
I want to get a 40k tornado motor. What gear ratio should I get?
@high1destiny473
3 жыл бұрын
Ok I just got a lancer tatical v2 19 and am trying to make it a very fast inside build what parts do i get
@Aditya-wg3lp
3 жыл бұрын
Molleman
@thomasfinney2898
2 жыл бұрын
BBS just go about 5 ft
@Ebk-vk8px
3 жыл бұрын
What size is most v2 gear box bearings
@occoug
3 жыл бұрын
I have an Umbrella Corp Weapons Research Group M4 Evike ID 20759 and the trigger micro switch just crapped out. When the battery is plugged in it starts to fire until you smack the gun. Do I need a new Trigger mosfet or something else?
@Stalking_Crow
2 жыл бұрын
So I'm upgrading my Cyma m14 do you have a recommended V7 13:1 gears?
@yaroslavkaplii3318
2 жыл бұрын
Hey guys I have a A5 416 from you it is pretty new gun but what can you recommend to add?
@tfrougeoutdoors6240
2 жыл бұрын
Is a 22:1 ratio good or should i go to a 18:1
@Ryan_Not_Reeyan
3 жыл бұрын
First time try modding a gun got a question tho, should buy all the parts at a time to upgrade or should I buy the parts seperately and how should I seperate it into different parts.
@evikecom
3 жыл бұрын
Please send our Tech Department and email so they can help you - tech@evike.com
@speedybikelife7475
3 жыл бұрын
What is the best under 360 FPS higher rate of fire build set up ? Anyone ? I saw a FULL SHS upgrade kit wich will make my AEG run a lil faster from 9-11 rps to a solid 23 rps.. its not expensive but did some of you tried out a full SHS set ? My replica is a G&G raider with a mosfet equipped out the fabric so it runs without any issued on a 7.4v lipo's
@elpandaxxxx7349
3 жыл бұрын
Hi, i have a KWA TK45 and i want to change the motor to increase the ROF. any suggestion?
@notimpressedbyyourm4932
3 жыл бұрын
I have an infinity 30k but it’s pretty expensive it was 60$ but so worth it
@opairsoft8100
3 жыл бұрын
Tienly motors if it’s in your budget
@porvoonosho
2 жыл бұрын
45 day warranty? Is that a bad joke? 🤣
@upstate-settlers
3 жыл бұрын
Anyone know where to get a blend in shirt like this??
@metal7473
3 жыл бұрын
What can I install on a krytac lvoa s? What spring, hop up, hop up Bucking ??
@evikecom
3 жыл бұрын
Please contact tech@evike.com for assistance with upgrades
@rexmcstiller4675
3 жыл бұрын
not first
@AmbiguousAndrew
3 жыл бұрын
Shooting around 380 with .20s. What spring level would get that more around 400? M120?
@evikecom
3 жыл бұрын
Please direct technical questions to our Tech Department support@evike.com (626) 286-0360 7:00am to 5:00pm PST Monday through Friday
Please help..What is the seal size on these dual seal cylinder heads for lonex your taking about??
@evikecom
3 жыл бұрын
Please contact tech@evike.com for assistance with parts and technical questions.
@jeffhallii7907
3 жыл бұрын
Can can I use all these on my krytac spr? And I’m just looking to over build this thing.
@JasonFolk07
3 жыл бұрын
Everything but the gears! Krytac makes their gears Proprietary so if you were to geta new gear set Prometheus would kinda company that makes em
@thomasfinney2898
2 жыл бұрын
I need help with my F1
@evikecom
2 жыл бұрын
Contact tech@evike.com for assistance
@andrewheck1681
3 жыл бұрын
what are the best upgrades to make my aeg quieter? Other than a suppresser obviously.
@platboihenk
3 жыл бұрын
low ratio gear set baw bevel pinion weak spring somthing that absorbs the inpakt frome the piston light piston poli cylinderhead ht motor
@ChasWG
3 жыл бұрын
suppressors do almost nothing to quiet an AEG. The biggest sound from an AEG is from the gearbox noises. there are some fairly esoteric things to muffle the gearbox, but overall, it's usually not a big deal. Now if you really want to be sneaking and a lot quieter when you shoot, the get into HPA guns. In those cases the foam filled suppressor actually works. I use a Kythera engine in one of my M4s and in with that gun, the loudest part is the click and reset of the trigger. It doesn't sound anything like any other airsoft gun out there. Some of the other HPA engines are even quieter yet as they use electronic trigger boards and are basically silent when it comes to the gearbox making noises. Baffle the air coming out of the barrel and you get a really quiet gun.
@minhthinhhuynhle9103
3 жыл бұрын
Well well, there will be a long journey (including physics) waitin for u bro :)))
@BattleClown666
3 жыл бұрын
I am trying to upgrade my tavor 21 how do I make it better
@evikecom
3 жыл бұрын
For technical assistance or advice, you can always contact us directly: www.evike.com/faq/ support@evike.com (626) 286-0360 7:00am to 5:00pm PST Monday through Friday
@ericrodgers5646
3 жыл бұрын
Warranty shworranty. 🛠🛠🛠😓🔨🔨🔨🗡😉
@AmbiguousAndrew
3 жыл бұрын
So I can’t get a better spring for more FPS as a first upgrade?
@evikecom
3 жыл бұрын
You can! But up to a certain point. If the spring is too strong for your battery and motor, you're gonna have a bad time. If the gears and piston and gearbox can't handle the stiff spring, things could break. Our techs recommend not going above an M130 spring without upgrading those other parts.
@AmbiguousAndrew
3 жыл бұрын
@@evikecom oh okay, I was also trying to get into contact with you guys about bucking upgrades as well,but for now,my Specna arms sa-c07 shoots about 380 with .20s so I’d assume it’s around 350-360 with .25s. If wanted maybe closer to 400 with .25s what spring would be best without having to do gear work?
@AmbiguousAndrew
3 жыл бұрын
@@evikecom my gun also came with a mosfet so I can use an 11.1 lipo in order to power a stiffer spring.
@evikecom
3 жыл бұрын
Contact our Tech Department for technical assistance: support@evike.com (626) 286-0360 7:00am to 5:00pm PST Monday through Friday
@Josh-ev2xj
3 жыл бұрын
can i ship you my gun to upgrade?
@qumquats25
3 жыл бұрын
I also was wondering that 😅 i dont want to spend that money and break my precious gear box. Wouldn't mind spending the extra money to make sure its getting properly worked on
@evikecom
3 жыл бұрын
Yes you can! Please contact us and let us know that you are interested in our upgrade service. Be prepared with details regarding your replica (brand, model) and the desired upgrade parts and/or what you want to do (high ROF, high FPS, CQB, Long range, etc). Pictures of the product help immensely. Our customer service team will put you in touch with our tech department and they will work out the details with you. support@evike.com (626) 286-0360 7:00am to 5:00pm PST Monday through Friday
@xanderlemos4155
3 жыл бұрын
so i am new to tech stuff and i am trying to get into speed soft and was wondering what parts would be good for a faster trigger response and higher fire rate i am using a v2 gear box on my krytac trident
@dainiusvysniauskas2049
3 жыл бұрын
There are multiple ways to achieve high speed build. Easiest (and probably the most expensive) method is to simply install a HPA engine. If you don't want HPA, then you'll need ETU that replaces standard trigger contacts (and preferably has options like pre-cocking), decent quality piston, gears and motor. You can go either 18:1 gears with balanced or high speed motor or high speed gears (like 13:1) with high torque motor. There are also DSG builds, but they are difficult to do and can cost nearly the same as HPA, performance difference between good SSG and DSG isn't that big.
@evikecom
3 жыл бұрын
Contact tech@evike.com for parts recommendations and assistance with your build! You can also check the build list on any of our EPS products (high performance builds) and use that list as a guide: www.evike.com/products/13008/
@PurgeAirsoft
3 жыл бұрын
Where would I start to upgrade my H&K mp7 AEG
@GUY-ve3ne
3 жыл бұрын
Whats the brand?
@opairsoft8100
3 жыл бұрын
If it’s the vfc, you basically can’t
@GUY-ve3ne
3 жыл бұрын
@@opairsoft8100 if its any of the mp7 types its proprietary or plastic inside
@opairsoft8100
3 жыл бұрын
@@GUY-ve3ne TM and clones can be lightly upgraded with aep parts.
@auschris9296
2 жыл бұрын
he liltterally stole the moo o rings mo better from donut media
@defiantgoon4061
3 жыл бұрын
Airsofting is still around?
@emilsberzins5777
3 жыл бұрын
yes even in europe
@Terminatorbart
3 жыл бұрын
Top gearbox upgrade...HPA engine!
@sogerc1
3 жыл бұрын
Yeah, if you want to loose that last shread of realism.
@elidennison9902
3 жыл бұрын
My personal advice. When you want more performance then standard AEGs... HPA your gun... it will end up costing you about the same in the long run... and nothing beats HPA.
@MauricioRodriguez-os5bd
3 жыл бұрын
Totally agree but a lot of fields don’t allow HPA
@JasonFolk07
3 жыл бұрын
I'll give this the performance is better on hpa no doubt but the cost verys depending what you get ect. A basic hpa setup where I live is around 600 to 700+ for everything. Honestly tho I would like to have one but the price on them seems to go up at that price I could buy krytac tr47 :p
@hunterstuart6843
3 жыл бұрын
Not first 2
@elicarr7981
3 жыл бұрын
2nd
@jamesmartin8532
Ай бұрын
Why is Vick pronounced Vick, Ike pronounced Ike, like pronounced like, but Evike is pronounced E-Vick. Damn english is confusing And im american.
@AKMN.g36k
3 жыл бұрын
日本にいつくるのかな?🇯🇵
@evikecom
3 жыл бұрын
コメントありがとうございます。来年、物事が落ち着いたときに、レイラックス/クリタックとのイベントに参加できることを願っています!- Matt (Thank you for the comment. Hopefully we'll be able to attend an event with Laylax/Krytac next year when things settle down!)
@eugenesbff1972
3 жыл бұрын
I was the 30th like
@Prowisss
3 жыл бұрын
Don’t buy an aster. Get a titan
@IwillCommentOnYourVideo
3 жыл бұрын
don't buy a warfet get a bean and cheese burrito
@darkshock42mlg05
3 жыл бұрын
Every upgraded aegis naked without a mosfet. Seriously why wouldn't you want to use an 11.1 and youbwant it to not damage your contacts. Also if you want trigger your response use a really high torque motor with 10:1 gears. I actually use an asg infinity 18K motor with 10:1 in a g&g m14. It's a slower motor but has the most torque possible. It has 28tpa and since the gears spin fast i can spam .32's at people 100 yards away all day.
@nfl7509
3 жыл бұрын
3rd
@TheWeekendShooter308
3 жыл бұрын
The best AEG upgrade is to hpa it and move on with your day LOL
@JasonFolk07
3 жыл бұрын
If the line, regulator, tank, hpa engine, wasn't so expensive I would but at that price you can just go buy a krytac lol
@TheWeekendShooter308
3 жыл бұрын
@@JasonFolk07 krytac is ass, go buy umbrella
@TheWeekendShooter308
3 жыл бұрын
@@JasonFolk07 krytac aint even expensive either, might as well save the cash and buy a combat machine and upgrade that
Пікірлер: 221