Never thought of putting the dbrand skin OVER magsafe ring. thats a great idea thanks.
@SomethingMobile
Жыл бұрын
I'm happy to help!
@angrystonerguy9722
Жыл бұрын
you're the best case reviewer on KZitem bro hope your channel blows up because you deserve more views
@SomethingMobile
Жыл бұрын
I appreciate your positive review my friend! I’ll definitely keep going till I get there.
@sero2700
Жыл бұрын
In my opinion, the Bellyroy leather case is the best case for the Pixel 7 series. Hazel color + Bellroy Black leather Case 🔥
@kenkiefer4686
Жыл бұрын
Appreciated the review of a variety of cases. I have both a dBrand Grip and Spigen Thin Fit case on order. Thank you
@F9isme
11 ай бұрын
Is the lip in the sides of the Otterbox Defender elevated enough to protect the phone with a screen protector? I'm using a cheap chinese case right now because I've checked several cases and they all fail in that point. In my last two pixels I used Otterbox Symmetry but I think it's one of those that fail in the sides. You said that you're using a screen protector and it seems that the lip is good enough but please confirm. Great video, thanks!
@SomethingMobile
11 ай бұрын
Just a little higher.
@thedawapenjor
Жыл бұрын
I have the Symmetry and I have say it's aweful. It's protective for sure but it collects scratches, dust, and worst of all have the least responsive feeling buttons. Sometimes I can't tell if a input was register at all or not.
@SomethingMobile
Жыл бұрын
Yes, I must say though. The black version of the Symmetry is super nice. Just don’t know if it’s available for this phone at the moment. 1-31-2023
@bbaccivorous
Жыл бұрын
The otterbox defender pro is the case ive always used. Its always horribly scratched the edge of the phone . With this video though, think im getting the mous!
@Freikorptrasher
Жыл бұрын
Great video! Getting the Mous one soon.
@SaultiBalldeip
9 ай бұрын
The later case is absolutely useless other than to add a magnet to your phone which you can easily buy separately and stick to a case. The top and bottom of your phone is well as the entire screen is exposed with a snap-on case like that. I don't get the point
@SomethingMobile
7 ай бұрын
Thanks for sharing your thoughts
@rogermontano1843
Жыл бұрын
Try ghost teck looks like a otter box but very different and I seen a metal case to I love the metal case but it's a little bit of a hassle to put on
@Riverpeth
Жыл бұрын
Have you tried the Peak Design case? Also has built-in magsafe, similar to the Mous.
@SomethingMobile
Жыл бұрын
I haven't tried that one yet. Have you tried it and if so how do you like it? Also, thanks for the heads up.
@SaultiBalldeip
9 ай бұрын
The best cases made in my honest opinion are the ones created by Ghostek. I have used and tried so many cases and the Ghostek cases offer the best protection out of all of them. They slide in and out of the pocket easily they're super grippy and I have dropped my phone many times in this case from many different heights and my phone is perfectly fine. I'm surprised that you didn't include Ghostek.
@SomethingMobile
7 ай бұрын
Thank you for sharing your thoughts and experience
@jcolt84
Жыл бұрын
I made the mistake of purchasing a brand new MOUS carbon fiber case for my pixel 6 pro 37 days ago, only to turn around and purchase the pixel 7 pro today. Looks like they only accept returns within a 30-day window, so I'm screwed. I was even considering taking an exacto knife to one of my many Pixel 6 pro cases, in the hopes of making one work on the pixel 7 pro. Anyways, I was rather let down by the carbon fiber mous case that I purchased for my Pixel 6 pro, because it was nowhere near as nice as the translucent mous case I bought for my iphone 14 pro Max. That case left me spoiled.
@aznbenmaz
Жыл бұрын
I don't speak English, but where did the rhinoshield shells go in your test? why not test them. I used Spigen's thin fit without magasafe and solidsiut
@jcolt84
Жыл бұрын
Why did the sides of the mous case appear to be identical to that of the DBrand grip case?
@GriffXJ
Жыл бұрын
Any OtterBox case with rubber just sucks. I've had several defender cases in the past that began stretching and hanging off the plastic after not even a year. I also had a few symmetry or commuter cases, and the rubber on those also started to deteriorate after only 6ish months. Sticking with UAG and Peak Design going forward.
@JustAFatGuyInTX
Жыл бұрын
Another channel said they had to file the front of the Otterbox Defender to make their screen protector fit. Otterbox usually makes great cases but I feel they dropped the ball on this one, there are other cases that fit with screen protectors just fine. (Encased for example) It is fine and their warranty system is pretty good, about the only reason to get a case from them at this point.
@BreezeDaDon
Жыл бұрын
I dissagee, you gotta have a otterbox. Only case that will touch my phone right now. On cheaper phones, it's cool to cheap out on the price. But not on high ends
@scootermcgoot
Жыл бұрын
What's the name of the magsafe ring on the thin fit case? Do you recommend that one? I love the thin fit case!
@SomethingMobile
Жыл бұрын
Sinjimoru. They are available on Amazon
@Yakito666
Жыл бұрын
Is the video every so slightly out of focus? I feel like I was watching something without glasses if I had bad eyesight.
@courtenaydavis707
Жыл бұрын
Encased case doesn’t charge well at all as it will say charging and then stop. I woke up with less power as it stopped. I wouldn’t recommend it.
@loonytunezz5452
Жыл бұрын
if you wanted to make the otter box magsafe, do u put the kit on the outside of the case? inside? or on the phone?
@SomethingMobile
Жыл бұрын
On the outside. That is if you can get it to stick. There might be a problem with that. You might get lucky and if you place the MagSafe ring on the inside of the rubber part of the case. The rubber might be thin enough to allow a fairly decent magnetic hold. I highly doubt it though.
@MrPaddyFowler
Жыл бұрын
The worst thing about the Mous case for Pixel 7 Pro is the buttons at the side. It's so difficult to actually feel / find the button, particularly the power button. They should have made them more pronounced.
@pissgoat
Жыл бұрын
Oh god I thought I was the only one, that's the reason I sold mine
@CoachD77
Жыл бұрын
Totally agree, not sure what they were thinking when they made these cases....
@Qqq1946
Жыл бұрын
BRAH SCREEN PROTECTORS??
@SomethingMobile
Жыл бұрын
Dude. Yes, next time. So you know. I’m using the Whitestone dome glass in this video.
@kylenielsen5341
Жыл бұрын
How about Caseology Athlex?
@SomethingMobile
Жыл бұрын
Please let me know if you have used this case.
@kylenielsen5341
Жыл бұрын
@@SomethingMobile Yes, I like it. The back seems to protect the lenses and air pockets in the corners seem to offer some drop protection. It has enough of a lip to keep the phone from laying on its face.
@harrylen1688
Жыл бұрын
Not sure of these selection! Try some Amazing cases @ Amazon
@SomethingMobile
Жыл бұрын
Please make a brand and model suggestion.
@chirag_krishnan
Жыл бұрын
The waffle House has found its new host
@SomethingMobile
Жыл бұрын
Haha. Is that good or bad? Just asking so I can improve. Thanks friend.
@SomethingMobile
Жыл бұрын
I just spent way too much time, trying to figure out “the waffle house has found its new host.” Five minutes actually to be exact. I have come to the conclusion after finding several articles explaining. All that means is nonsense. It’s a nonsense comment. It’s a meme. Actually, it’s almost not even a meme. It’s not based on anything that has occurred necessarily. It started from a KZitemr that asked its followers to leave comments in other social platforms as well as KZitem using this phrase. So there you go. You are welcome to whoever’s reading this.
@chirag_krishnan
Жыл бұрын
@@SomethingMobile oh no I'm extremely sorry yea it is a meme from some random channel and I loved the video jus wanted to say that it dosent actually mean anything bad instead it's actually like when you want to say something is nice when this meme is used
Пікірлер: 47