If I watches your vid I’d have guessed you had 100k subs. Bro you’re an amazing content creator for your channel size.
@supafpv1759
3 жыл бұрын
Dang man I appreciate the kind words!
@THEGANJASAINT
2 жыл бұрын
Subscribers quantity doesn't make a man. Only dedications make a man.
@SamsonMaier
3 жыл бұрын
Completely underrated ... Very good video mate🔥🤍
@supafpv1759
3 жыл бұрын
I appreciate it man!
@thelazerproject
3 жыл бұрын
How do you film so good bro, you deserve many more followers, im sure that sooner or later your work will pay off, like seriously the cinematography is 10/10
@supafpv1759
3 жыл бұрын
Awww thanks man! I really appareciat that! I do this channel as a stress reliever and a second hobby haha so I try to learn new ways to get B roll and etc lmao. Thanks for the continued support!
@idiboss6782
3 жыл бұрын
Thanks for helping me make my final decision on whether I should build, or buy a bind and fly for my first qwad. I don’t have much money to drop on a qwad so I think I’ll copy most of the parts on your qwad.
@supafpv1759
3 жыл бұрын
Awesome news man I always say build instead of buy a BNF!
@n8taing612
3 жыл бұрын
Another line of budget motors I would recommend are the T motor velox v2's. I have the 2207 2550kv and they are some really really good motors, and just for $13 a piece
@supafpv1759
3 жыл бұрын
Those are a great set as well!
@DaveyFPV
3 жыл бұрын
Nice video, you're becoming Bardwell v2! My current favourite fc is the foxeer f722 because it is reliable, cheap, and has a great layout. It's probably one of the best flight controllers for racing. I also use the hobbywing xrotor 4in1 escs because they are almost industructible. I've been flying those escs for a year and not one has broken. Getting a better esc can save in the long term because your quad is less likely to catch on fire, etc.
@supafpv1759
3 жыл бұрын
Thanks haha! Idk about bardwell v2, that man is wayyy more knowledgeable than me lmao. And those are great recommendations! I primarily chose the stack I chose because it’s an all in one. Beginners wouldn’t need to be worried about esc to FC wire harnesses and stuff haha. But you’re recommendation is spectacular for racing and I agree a good esc is important indeed!
@thexz176
3 жыл бұрын
Another great video :D really neat information!
@supafpv1759
3 жыл бұрын
Thanks man!
@eightk4225
3 жыл бұрын
i see this channel getting somewhere
@supafpv1759
3 жыл бұрын
Thanks man!
@v_ktr4358
3 жыл бұрын
I do legitimately think that your content is on par with the "big Guys". Great production quality, stays on topic, all around great. seriously!
@supafpv1759
3 жыл бұрын
Thanks man honestly thank you! That is very sweet of you to say lmao
@v_ktr4358
3 жыл бұрын
@@supafpv1759 Man, no problem, for real! Its so hard to stay motivated when you have a small channel but I do really think that you got this thing down! You can really see the dedication and passion you put into your videos! trying to venture out and to do something more than just flight edits is a hurdle im still fighting with and seeing other people put this much effort into their projects just shows how dedicated you are and also motivates me and hopefully others! keep it up man
@supafpv1759
3 жыл бұрын
@@v_ktr4358 yea that’s 100% true. It’s kinda disheartening when you put in a ton of effort and get just a hand full of views but to me I do this as a kind of stress reliever and alternative hobby haha so I don’t quite mind lmao. One day people will start noticing my channel! I enjoy it whether it’s gonna get views or not I feel like that’s an important part of us small guys. Quality vs quantity I say quality wins!
@billgates3103
3 жыл бұрын
underrated channel ngl
@mikeoxmall4248
2 жыл бұрын
super under rated content is amazing
@gazfpv
3 жыл бұрын
Nice flying supa. 👍 Another smooth rip. 👍 Great info. 👍 🇬🇧😀
@supafpv1759
3 жыл бұрын
Thanks man! I always love seeing your comments!
@laurinflipt
2 жыл бұрын
Hey, thank you very much, I current have the Eachine novice 3 rtf kit and I may wanna build one by myself and do some cinematic stuff
@nukekasparov
3 жыл бұрын
very nice build man....
@supafpv1759
3 жыл бұрын
Thanks boss!
@LuDiamondss
3 жыл бұрын
I agree with Golden_FPV you would definitely think you would have at least 20k subs or something up there. Your videos are decent bro. You must be just getting started. Or not pushing hard enough. Keep it up bro you will be up there in no time at all... Nice vid. I subbed.
@supafpv1759
3 жыл бұрын
Thanks Man!
@AdvenTips
3 жыл бұрын
Amazing video!! Love you hard work😊Thank you for sharing my friend👏
@supafpv1759
3 жыл бұрын
Thanks boss I appreciate it!
@cowkingninja212
3 жыл бұрын
That drone looks cool
@supafpv1759
3 жыл бұрын
Thanks fam
@willofirth6164
3 жыл бұрын
Bro ur vids are amazing and so helpful!! I’m using all the parts that u listed to build my very first quad. U definitely deserve way more subs than u have
@rzfpv2823
3 жыл бұрын
Really great video, thanks for sharing bro. This is such a great build!
@supafpv1759
3 жыл бұрын
Thanks man!
@GAMERULTRON
3 жыл бұрын
600th Subscriber
@supafpv1759
3 жыл бұрын
Ayyyy thanks man!! Welcome to the channel!
@GAMERULTRON
3 жыл бұрын
@@supafpv1759 love from India🇮🇳
@AttilaTevi
3 жыл бұрын
Great work buddy. 👍🏼🔥
@supafpv1759
3 жыл бұрын
Thanks man!
@Reecefpv
3 жыл бұрын
This is basically exactly what I'm planning for my next build but I wanna used the fpvcycle glide frame just for space and easy arm replacement but then again with that price for the source 1 I could get 2 ,1 for parts.
@supafpv1759
3 жыл бұрын
Right on 🤟🏽 the glide frame is super dope man but yea price is a factor haha
@Jorgenva
3 жыл бұрын
What goggles and controller you recommend I don't have nothing and I want to buy my first quad
@randomvideos296
3 жыл бұрын
Great video. I will subscribe
@alaingosselin8764
3 жыл бұрын
Hey bud, great video 😃looks like a great kwAd , have a great day 👋📸
@supafpv1759
3 жыл бұрын
Thanks man! You too!!
@banditfpv8392
3 жыл бұрын
Tienes mi like Bro ... Muy buena intro... Es lo que me falta a mi jeje
@supafpv1759
3 жыл бұрын
Gracias mi amigo!
@adam_seal
3 жыл бұрын
You could use readytosky mark 4 frame clone its cost like 20-25$ and its exact same
@supafpv1759
3 жыл бұрын
This is true, any clones can be used. The frame is more of a preference kind of deal haha. This one is widely available in the US and its not a clone. But yea my first build had the banggod clone haha so I feel you
@adam_seal
3 жыл бұрын
@@supafpv1759 😅😅😅 yh bcs I'm fun of the mark 4 frame
@tylerelliottFPV
3 жыл бұрын
You can't (per say) clone the Source One frame. TBS created it so people would make it their own. It's an open source frame. All of the files are available for whomever to take and do what they want with.
@GhostFpv
3 жыл бұрын
Yessss Supa; I see you. Great work!
@supafpv1759
3 жыл бұрын
Thanks fam!
@kevinpolo882
2 жыл бұрын
I didn’t see anything on controllers, any controllers you recommend? Does any fpv controller work or are there specific ones that are compatible with this build? Sorry if this is a newbie question. Appreciate your time. Like and subbed 👍🏽
@erntec
3 жыл бұрын
Hello nice build, is there any chance of seeing how to assemble it???
@supafpv1759
3 жыл бұрын
Nah many sorry. I do however have a video titled how to wire up a flight controller where I show how to wire up the exact flight controller I used in this video. Let me know if you have any questions.
@erntec
3 жыл бұрын
@@supafpv1759 thank you very much this is my first build👍
@erntec
3 жыл бұрын
@@supafpv1759 also what Transmitter would you recommend me for this specific build????
@supafpv1759
3 жыл бұрын
@@erntec depends on what controller you have. If frsky id 100% go with the xm+
@erntec
3 жыл бұрын
@@supafpv1759 thank you very much
@flannyfpv
3 жыл бұрын
I need a new kwad. 😔 Awesome video my man🤜🏻💥🤛🏻👍🏻
@supafpv1759
3 жыл бұрын
Hell yea man! This one should be friendly to your wallet!
@MadDragon75
3 жыл бұрын
Supa! I'm shopping for a $200ish quad. I'm leaning towards freestyle but long range would be cool. As long as I could pull G's in a split S and / or occasional powerloop. I prefer traditional analog. I understand digital is becoming increasingly inevitable. But I just started with a decent transmitter and diversity goggles. Lol. I should have already been past this point by now but hey.. We all do what we can. So anyhow. Any input on my next build or buy would be awesome. Other viewers as well. All input is appreciated by myself and other future people like myself. Thanks for your time.
@MadDragon75
3 жыл бұрын
BTW. I need to restart the video. 😉 this might actually be the one.
@supafpv1759
3 жыл бұрын
Definetly this budget quad man, it’s super sick! With a 1500mah battery it can fly for like 5 solid minutes. Like it’s a superb quad won’t break the bank
@MadDragon75
3 жыл бұрын
@@supafpv1759 awesome! I'm just wrapping that list of parts up in my browsing history. Lol makes it easier to get the big mental picture.
@supafpv1759
3 жыл бұрын
@@MadDragon75 for sure!
@wynnfpv
3 жыл бұрын
Very nicely out together man! What camera do you run?
@supafpv1759
3 жыл бұрын
Thanks man and GoPro hero 7 black!
@MissPinaii
3 жыл бұрын
Thank you. It can really flip and roll?
@supafpv1759
3 жыл бұрын
Oh yea definitely. As long as you know how to 😂
@Mickelerbz
2 жыл бұрын
Hey man! Love the video! What’s a good budget receiver I can get that would work with the betafpv lite radio 2 se? I’ll eventually upgrade but for now that’s what I got
@supafpv1759
3 жыл бұрын
4k finally finished processing! Also if you’re not subbed yet please show me some love by hitting that sub button! This video took a while to make haha. ALSO, Tuning notes and pretty much everything you need is in the description!
@ForwardEngineering
3 жыл бұрын
So the Diatone Mamba F405 Mk2 F40 is sold out. Would the Diatone Mamba F50_BLS 50A 3-6S 30x30 4in1 ESC be a good alternative? What's the reason between the Diatone Mamba F50_BLS 50A 3-6S 30x30 4in1 ESC and Diatone Mamba F50 32Bit 50A 3-6S 30x30 4in1 ESC? 32-Bit as in what benefits does it have? I will be running it with some fatshark goggles and a taranis qx6.
@nolanworking6812
3 жыл бұрын
Will a fly sky transmitter be able to connect to this drone? And how do I know what cheap goggles will work with it? Thanks
@Magic_Doge
2 жыл бұрын
if i could spend a little bit more, what should I upgrade?
@mekhidart9218
Жыл бұрын
can i add a tbs crossfire receiver on it
@Luke911able
3 жыл бұрын
What would be a good budget transmitter to use with this quad?
@supafpv1759
3 жыл бұрын
Ive actually got a separate video on my channel for a budget setup with this quad.
@illusionfpv1326
2 жыл бұрын
Hey supa, do you know if this is capable of 6s?
@k1ortia
3 жыл бұрын
Amazing video and great build. i have a question though. How are you getting 30fps on the gopro 7 black?. Iv the same camera but there isn,t a 30fps option at all, cheers
@supafpv1759
3 жыл бұрын
Thanks! And interesting, yea I have 30fps options all the way up to 4k. What options do you have tho at 4K?
@supafpv1759
3 жыл бұрын
I have a hero 7 black video on my channel you can check out to see how I set mine up maybe that’ll help?
@k1ortia
3 жыл бұрын
@@supafpv1759 On my hero 7 black at 4k, my frame options are. 24-25-50-100 and 200. This is the same through all resolutions, 4k, 2.7k ,1440,1080,960 and 720.
@supafpv1759
3 жыл бұрын
@@k1ortia sounds like you’re in PAL and not NTSC. Go into settings and change the video format to NTSC
@k1ortia
3 жыл бұрын
@@supafpv1759 iv never tried that. As I'm in the U.K the normal setting is PAL. But i,ll see if i can change it and also i,ll watch your hero 7 video. Much appreciated...👍🏾
@Victor-cf3gr
3 жыл бұрын
What battery did you use
@thecomicbennett
2 жыл бұрын
do you have a betaflight and rates guide for this build?
@supafpv1759
2 жыл бұрын
My rates are the same as steeles
@thecomicbennett
2 жыл бұрын
@@supafpv1759 where can I find those?
@Reecefpv
3 жыл бұрын
What's the auw
@supafpv1759
3 жыл бұрын
If I was to guess, cause I don’t have a scale like that, about 600-700g cause those motors are heavy lmao
@mateodigiusto
2 жыл бұрын
Can it hold gopro 10?
@madladdan
3 жыл бұрын
This vs nazgul 5?
@sidewaymaster
3 жыл бұрын
I paid almost $ 300 and I think it's cheap. LoL 😂😂😂
@supafpv1759
3 жыл бұрын
Lmaoo cheap is subjective I guess haha . My main freestyle quads about that much lmao
@scash231
3 жыл бұрын
hey supa im new and not good at building drones , could you do a setup video and also recommend a google for me thanks :)
@supafpv1759
3 жыл бұрын
Welcome to the hobby! I have a video on how to wire up a flight controller that should help you through the basics. For new people I’d recommend the eachine ev800D for goggles. They’re box goggles but they’re awesome for the price.
@scash231
3 жыл бұрын
@@supafpv1759 thank you :)
@lyricseditoryt156
2 жыл бұрын
Wheree to buy?
@ChupoCro
2 жыл бұрын
Only 5 minutes when just cruising? Something is out of balance. 5" quadcopter with 2205 2300 Kv motors + 4s battery and the right propellers cruise time should be at least above 10 minutes if not close to 15 minutes.
@aadharsh1094
Жыл бұрын
Mannn not to hate or anything,u really need to change the background cuz ur autofocus is sooo all over the place 😅
@scash231
3 жыл бұрын
one last question, how do i power this drone?
@supafpv1759
3 жыл бұрын
With a 4S lipo. I’d recommend a CNhl black 1500mah 4S
@scash231
3 жыл бұрын
@@supafpv1759 ok
@assadhamidi6019
Жыл бұрын
Can i freestyle with it
@kamicj3522
3 жыл бұрын
These items are well over $150
@Mwrhgamiolapepa
3 жыл бұрын
He says aaaa 125 times pr sec
@FATSNAIL-FPV
2 жыл бұрын
uuuuh, tells something, uuuuuuuuuh repeats same info but different words. uuuuuuhhh other then that. Actually informative video, now i know what to maybe build if my ESC/FC upgraded Tyro119 breaks an arm.
Пікірлер: 120