CP always had quality barrels , I remember in '04 my impulse had all the CP upgrades even had CP barrel on my shocker
@reignick1133
6 жыл бұрын
If you're ona budget you can not go wrong with Custom Products, their barrel kits are very good too!
@_mr.boss_1308
6 жыл бұрын
0:00 stop on it. Im dying
@lagang2269
4 жыл бұрын
i see what you u talking about
@jamesrocks94
6 жыл бұрын
Could you make a video about your thoughts about buying used paintball stuff like stuff to look out for questions to ask good used guns to buy etc etc
@jackkenny4194
6 жыл бұрын
Just got my cp barrel acouple days ago man. Your a cool dude and love your channel!
@miip1688
3 жыл бұрын
indeed /\
@coreybonds3468
Жыл бұрын
Love paintball just got back in the game
@mrfluffy420ftwbboi3
3 жыл бұрын
You probably won’t see this but what’s the best barrel to put on a tipmann Cronus
@devina.1051
4 жыл бұрын
How do I know which barrels will fit on my marker?
@logansoup6675
2 жыл бұрын
Check the thread type of the barrel! What marker do you have?
@devina.1051
2 жыл бұрын
@@logansoup6675 I had a Spyder Victor, now I’ve worked myself up to a Azodin Blitz 3. Still classic but still gets the job done. Thanks for the reply!
@JavierMartinez-yp5sp
2 жыл бұрын
@@devina.1051 for the spider there is a spider thread as for your other gun I am not familiar , I have a Tippmann Stryker mp1 and it’s a autococker thread
@ashravenpb
6 жыл бұрын
Cp barrels are made well, but they don't have enough porting imo. The driver, lurker, and j&j barrels are all ported better and the finish is just as good
@SlimPickens0
6 жыл бұрын
Guarantee you the finish is nowhere near as good on the Empire barrels. Also, yes it is loud, but if you really want a sh*t ton of porting, buy one of those shorty Eclipse knockoff freak backs and stick a 16" shaft 4 tip on it. 5" of control bore, 7.5" of porting roughly. I hold the fit and finish on CP barrels just below Dye/Inception/Bob Long/Eclipse, and above everyone else
@pbjean6631
6 жыл бұрын
I have an .689 CP barrel works great. Will try out the other two
@catirbyarnold8223
6 жыл бұрын
Please Do a HK ARMY XV barrel kit review, I want to know your opinion!
@andrewquesnel2359
3 жыл бұрын
I've got the first empire barrel you showed, it was thrown in as an extra when I got my mini gs, I've been looking everywhere for a dust orange barrel back for it to match my color scheme with no luck, I started with a black mini gs and added some dust orange parts to make it a bit more flashy
@DjBobe89
2 ай бұрын
Are there any barrels compatible with the Tiger Shark Brass Eagle. I've told it has Raptor treads and that I could mod a raptor barrel to fix it. I'd rather just find a 14 barrel that I slap on without mods.
@PCSkate401
6 жыл бұрын
remember the j&j ceramic
@tankmage89
6 жыл бұрын
Curro Official I thought the same thing
@chicagosbackbone
5 жыл бұрын
love that barrel
@sanders539
5 жыл бұрын
That's what I'm using at the moment. I'm trying to decide if the CP one piece is better or not. Any thoughts?
@BamBlamboTv
3 жыл бұрын
I loved paintball but for a whole stopped cause it was expensive and I only got to play a few times a year but I've decided to get back into paintball as now I usually have more money and I'm planning on getting a gog enemy
@theJStrick54
2 жыл бұрын
I hope you're enjoying the GoG Enemy. If you haven't got one yet, I'd save up for the Emek. I have one and a Mini GS. Love em both but the Emek is incredibly versatile with the valves and triggers they have. Cheers!
@PewPewMike
6 жыл бұрын
Enigma barrel #neverforget
@daniellewis8942
27 күн бұрын
I have a dlx luxe 2.0 oled was thinking off upgrading my barrel but stuck on what thread I need is it smart parts or ion?
@TTV_VRT
Жыл бұрын
I need a 35 inch barrel for the spyder fenix. Any recommendations?
@Kevin-ol8dq
4 жыл бұрын
Will this fit a Azodin blitz3
@Kannerjb711
3 жыл бұрын
Does this video still hold True in 2021? Looking for an affordable barrel for my Tippmann 98, it’s my second player marker
@Jay_is_up
3 жыл бұрын
I’m gonna save up for a CP 12” autococker it shouldn’t be hard
@joekelly9369
2 жыл бұрын
for tippmann tmc elite 68 ..reccomendations
@PaintballRuinedMyLife
2 жыл бұрын
Love the CP barrel, fits perfectly through the shroud too.
@dangermode9762
3 жыл бұрын
I bought a cp barrel for my a5 but it had a 98 thread. It even said a5 on the package.
@albertosanchez-breton9204
5 жыл бұрын
Any review on the 2 piece driver xx
@ashravenpb
6 жыл бұрын
My top 3 1: Lurker V3/V4 2: Distruptive Death touch 3: used freak with AA tip
@camvapes7349
6 жыл бұрын
I seen somebody last Saturday with a cp barrel on his Dye Proto rize and at 40 dollars I can’t pass that up
@wendingo452
6 жыл бұрын
For sure, they are great barrels regardless of which one you get. As long as you have a good bore size they are great performers.
@GodOfWar109
6 жыл бұрын
Don't let anyone knock you for a CP barrel, they been around a long time, are cheap, & are some of the best on the market. Remember most expensive isn't always best, most of the time your paying for the name.
@chase_talley436
6 жыл бұрын
Someone needs to try a 21 inch barrel on a tipx
@SlimPickens0
6 жыл бұрын
Skip the Empire barrels. I had a full kit of the Driver XX (2 piece version of the Driver X barrel), and the backs were finished HORRIBLY, there were literally sharp burrs where the chamfer from the breech ended. I had to take my deburring tool to remove that paint chopping burr (also it destroyed the anno). And I'm not the only one that's been having that issue with these Empire barrels.
@TheGravewalker
6 жыл бұрын
Best budget barrel? Find one of the many nice people in the PB community to drill out your stock barrel for Freak inserts. Then find a few used inserts. You'll get better paint to barrel match and spend less money than any of the options mentioned in the video.
@ashravenpb
6 жыл бұрын
But you don't get the extra porting that most aftermarket barrels have
@TheGravewalker
6 жыл бұрын
Ashraven PB True and the stock barrels are usually shorter but you keep the colour and Budget! Bang for Buck!
@PaintballRuinedMyLife
6 жыл бұрын
That is a good option, but certainly not less money.
@xFireManV1
6 жыл бұрын
Disruptive death touch barrels. Backs are only $30 tips $10 for $40 there’s no barrel that beats it imo. Plenty of color options, reverse threaded therefore it’s compatible with PE backs and tips.
@ashravenpb
6 жыл бұрын
Since Lurker no longer offers the .681 eigenbarrel I may have to pick up a .682 death touch barrel. Does it have the chamfered/beveled entrance like the eigenbarrel?
@xFireManV1
6 жыл бұрын
I don't think so, but I'm not 100% sure. I'll double check when I'm back from vacation
@jasona2315
2 жыл бұрын
whats that song at the start?
@nunia720
4 жыл бұрын
Does any of these barrels fit the protorize max? Im having a problem finding exactly what freak kits or barrel will fit my threads..
@tyler237s7
5 жыл бұрын
Can you use any of these on the tin Mann Cronus
@PaintballRuinedMyLife
5 жыл бұрын
The CP barrels with Tippmann A5 threads will work
@ayooov3rdoseyt591
4 жыл бұрын
Any recommendations for a emek?
@PaintballRuinedMyLife
4 жыл бұрын
Id go with the CP 1pc. Give this Emek barrel video a watch - kzitem.info/news/bejne/u6ym3Z6niYODraQ
@BATMANLEWIS2002
4 жыл бұрын
Does the driver XX work for EMEK too?
@robbydiesel21
6 жыл бұрын
Anymore recommendations for a tippmann 98 custom?
@jackwall.fitness
3 жыл бұрын
What abt dye rise czr?
@andrewcampbell9595
5 жыл бұрын
Doesn't the driver x also come in a5 thread?
@xenopheb_104
4 жыл бұрын
Any recommendations for a tippmann Cronus .68 cal tactical edition?
@theasteroid5523
4 жыл бұрын
No don't
@virtual_balboa
2 ай бұрын
You honestly do not need anything more than a CP one piece barrel. All these expensive kits etc are just a money grab and won't improve accuracy. Sure others are lighter, have more porting, but from my experience a one piece outperforms any two piece barrel. Even using a closed bolt where you might run into rollouts, you don't need to buy a bunch of backs or inserts or whatever. Electrical tape for the win. Or the 3d printed breech detent fingers.
@marvinlin5907
6 жыл бұрын
Can the lurker v4 barrel fit on the dye proto rize maxxed? I want to change my gun's barrel
@nickthe1million336
4 жыл бұрын
What is the best barrel for the Cronus?
@kohleknouf3894
6 жыл бұрын
I just bought a Azodin kaos 2 I'm new to paintball. what in home "drills" can I do to help me out in the feild? and is it ok to leave my compressed air tank on the gun? finnaly can you use a regular air compressed from home to fill your tank?
@ashravenpb
6 жыл бұрын
I'd recommend removing the tank and keeping the marker uncocked/decocked when you aren't using it. This reduces the pressure put on the springs and makes them last longer
@liamlynch2032
6 жыл бұрын
Broke Baller episode. In the next episode, we learn how to make a paint caddy from empty detergent bottles.
@PaintballRuinedMyLife
6 жыл бұрын
haha, that is never going to happen.
@maxmeyers6729
5 жыл бұрын
Why do you overlook the spyder fenix with a few upgrades it shoots better and is more reliable than the blitz 3 azodin uses non universal parts and there customer service sucks so if it breaks good luck
@seanl325
6 жыл бұрын
So a 1 piece barrel. Is the bore size the entire length of barrel or is it stepped down? If so how long is the control bore?
@ashravenpb
6 жыл бұрын
It depends on the barrel, but most one piece barrels do not have a stepped bore
@haydenserge
6 жыл бұрын
Ok I have an azodin blitz 3 with a cp barrel and my shots are going everywhere. I use graffiti paint it’s called something different now but I just don’t know what to do. The paintball when I am shooting go in literally every direction. Can someone please help me with this.
@ashravenpb
6 жыл бұрын
sounds like you either got a bad batch of paint or you need to clean your marker/barrel
@deltazip
4 жыл бұрын
It might just be the gun. The blitz 3 has been known to have a number of issues only because it's a little bit cheaper for electronic guns. Although this is a year old comment so I assume you have something better or have fixed it haha
@Tommy-vd8uh
2 жыл бұрын
Cp barely are currently out of stock on Amazon. Any other places I can get them soon???
@PaintballRuinedMyLife
2 жыл бұрын
Not that I know of, I’d look at the HK VX really good barrels and lots of options.
@Tommy-vd8uh
2 жыл бұрын
@@PaintballRuinedMyLife ok thx so much.
@Tommy-vd8uh
2 жыл бұрын
I couldn't find it so I'm going to just try the 14" Tippmann 98 j+j barrel
@LoadedGasMask
3 жыл бұрын
Any one recommend a barrel for the Tippmann stormer elite ?
@daviewavie112
2 жыл бұрын
I just got a tippman 98. I’m looking to upgrade the stock barrel with a 14” cp one piece barrel. What bore size do you recommend? I’m looking for improved accuracy, without necessarily having to have multiple barrels for bore matching.
@babygotbass2005
2 жыл бұрын
Getting the barrel size as close as you can to the paintballs size that you’re using is the best way to gain accuracy. Get like a .689 or .688 size and it’ll help. Like the CP he listed
@kanelitwiniec
6 жыл бұрын
Anyone have experience with a Techt I Fit 6 piece kit ?
@nuclearfish010
6 жыл бұрын
Ever thought of getting into airsoft? Or played it
@aaronevely2630
4 жыл бұрын
Would any of these fit a dye rail?
@PaintballRuinedMyLife
4 жыл бұрын
Yep, any barrel that has autococker threads will work.
@siiichuy
6 жыл бұрын
Hey in the eigenbarrel review you said you oiled it to take away the chalky feel, what oil did you use?
@m1a2abrams66
3 жыл бұрын
Just make your own oil
@tylerp2709
6 жыл бұрын
What’s the best barrel for a Mini GS?
@babygotbass2005
2 жыл бұрын
Get a Barrel freak with inserts. If you want the best it’s costly but man it’ll shoot as accurate as they get. If you want one on a budget get the last one he mentioned on the vid
@ryancreighton2681
3 жыл бұрын
I have a mini gs, what barrel would you recommend?
@Torchbuscus
3 жыл бұрын
Any of these barrels would be a good option. If you don't mind dropping a bit of change, the freak barrels are a great higher-end option. Just make sure what you're getting is autococker threaded so it will fit your mini.
@RighteousDestruction
6 жыл бұрын
I recently picked up a Dangerous Power G4 and bought the TechT L7 bolt. Are there any other issues I should be looking for? #PBQT
@ashravenpb
6 жыл бұрын
Just constant leaks and bolt stick
@mangophett3
4 жыл бұрын
(Disruptive Barrels?)
@razka23
4 жыл бұрын
do the barrels listed here work with the Mini gs?
@mrpotat680
4 жыл бұрын
Any "auto cocker" threaded barrels will work.
@Rookie_Cultivation
4 жыл бұрын
What barrel do you guys think I should use on the spyder fenix I need help on finding a barrel for it so please comment
@PaintballRuinedMyLife
4 жыл бұрын
Id go with the CP 1pc.
@sharpo4034
5 жыл бұрын
do these barrels fit in any marker?
@PaintballRuinedMyLife
5 жыл бұрын
Yes and No. The ones show here all fit guns with autococker barrel threads. You will need to find out what barrel threads your gun has a buy the barrel with the correct thread.
@cadenwood3497
5 жыл бұрын
what barrel kit would work for empire syx
@PaintballRuinedMyLife
5 жыл бұрын
Many. Any barrel with Autococker threads will work.
@lpyq489
6 жыл бұрын
Can i shoot defy lvl 2 paint from my mini gas with any of those barrels
@ashravenpb
6 жыл бұрын
Of course, just make sure the bore size isn't too small. If you don't know the bore size of the paint you shoot then a .686 or .688 would be the best size
@lpyq489
6 жыл бұрын
Ashraven PB thx
@SlimPickens0
6 жыл бұрын
I recently tested a case of that Lvl 2 paint. Bored out roughly 686, so I would overbore it or shoot a 682/3 barrel
@jtcraig09
5 жыл бұрын
Hey hey!!! I had a question about the cp two piece barrel system and I tried to research this myself.Okay! A question that may get posed. I have two different markers and I was considering getting a two piece cp barrel system so I could shoot that barrel with both markers. I have a Spyder Xtra from 2005 and a Smart Parts Ion. In theory, could I get two seperate barrel backs to fit both markers and yet one barrel front to both my barrel backs?? Tried to Google and couldn't get my answer.
@trashtronics1700
Жыл бұрын
Yes same thread
@johnjaramillo4572
Жыл бұрын
Yes.
@pineconeidiot8046
5 жыл бұрын
which barrel do you recommend for a proto rize??
@PaintballRuinedMyLife
5 жыл бұрын
Lots of them, I think all of the barrels in the video would be a good pick. The stock barrel on the Rize is pretty good though.
@pineconeidiot8046
5 жыл бұрын
Paintball Ruined My Life thanks!!!
@blablubb4553
6 жыл бұрын
In Germany, the choice is fairly easy: Choose a marker with a decent stock barrel, because upgrading to another barrel is forbidden. :(
@fnxtugboat3541
6 жыл бұрын
Seriously? that sucks, what about the shocker that comes with the freak system? or any gun for that matter? mine came with 3 backs from the factory.
@blablubb4553
6 жыл бұрын
You are not allowed to modify any marker beyond purely cosmetic features. Changing the barrel could theoretically have an impact on muzzle velocity, so it is prohibited. As are all magfed conversion kits, bolt upgrades etc. Everything that impacts performance.
@PaintballRuinedMyLife
6 жыл бұрын
😢
@GodOfWar109
6 жыл бұрын
Hahaha I thought folks in Germany just ignored the FPS rules anyways...
@blablubb4553
6 жыл бұрын
I don't think so. You can get charged with illegal weapon possession if caught with a modified marker.
@A-G-F-
6 жыл бұрын
is the Apex 2 barrel any good?
@ashravenpb
6 жыл бұрын
the apex tip is fun, but not incredibly useful. The barrel itself is made about as well as a stock 98 barrel
@poppy5201
6 жыл бұрын
Dose any one know if ansgear can ano autococker parts
@reignick1133
6 жыл бұрын
ANS gear won't do outside ano work sadly.
@SlimPickens0
6 жыл бұрын
Ha, like you should trust them to anno your parts. Tyler Fare at Aesthetic Anodizing and Rob Shaffer at Blizzard Anodizing are the two best picks I would offer to you for who to have anodize your parts
@an2565
6 жыл бұрын
You should make a video with your dog : )
@ryanbernstein7237
6 жыл бұрын
😆😂 quick draw mcbrad
@thedornado3931
5 жыл бұрын
The cp can I put it on a dye rize
@PaintballRuinedMyLife
5 жыл бұрын
Yes, just make sure that it has Autococker threads.
@thedornado3931
5 жыл бұрын
Ok thanks
@thedornado3931
5 жыл бұрын
I’m still confused about the barrel bore
@BlackMamba2150
4 жыл бұрын
This is off topic lol but what’s a good bolt upgrade for a spider fenix? I have this one to be exact www.amazon.com/gp/aw/d/B079LW85YS?psc=1&ref=ppx_pop_mob_b_asin_title
@PaintballRuinedMyLife
4 жыл бұрын
Non really, there might be a few you can buy, but they don't do anything.
@BlackMamba2150
4 жыл бұрын
Paintball Ruined My Life Okay thanks and do you know any good barrel upgrades for the spider fenix?
@jaredhall268
6 жыл бұрын
Ughh. Scientifically been proven you barrel dose not change your accuracy unless it was made defectively. Of course not talking about FSRs.
@ashravenpb
6 жыл бұрын
Bore size affects consistency which affects accuracy
@A-G-F-
6 жыл бұрын
with Co2 the gas has more time to descompress and give more consistent shoots
@katkrasher
5 жыл бұрын
Jared Hall wrong
@tomford5416
Жыл бұрын
buy ammo and sit poking balls in your barrels and select for the least light round the paintball tight barrel DURRRRRRRRRRRRR P.S. im not into drilled barrels , it vents gas & reduces velocity
Пікірлер: 140