Not sure if its a newer release but just found the ecp 110t servo online. Its way cheaper has more torque and is only .16 for speed compaired to the 100t .14. please give it a look. Oh also its water proof. So like. Idk what it is but it looks so much more desirable. Edit. Ok so the 100t is better at dissapating heat compared to the ecp 110t which if is a fair trade off Edit 2. It has the same rating for operating temperature range... Yeah nah this looks goated in every way. If you just wanna bash get a ecp 110t. I'll MAYBE come back and edit this a 3rd te if I run into issues after buying it for myself
@yorkrojas1452
3 ай бұрын
Amazing!! Thanks a Million!!
@skyshade9106
4 жыл бұрын
try the jx ecoboost is like 25 dollars and has 100t speed with metal gears the ownlony downside is it last like only 8 months
@jrc-fabs1634
4 жыл бұрын
I might run two of these in my 6s e-maxx
@twinturbotony93
4 жыл бұрын
Try the jx 32kg servo. You can get them from rc juice or EBay. Only $60 & it has over double the torque of the protek.
@jrc-fabs1634
4 жыл бұрын
ALRIGHT BET
@kadenfuller519
4 жыл бұрын
Could you please go over a budget brushless system because I'm looking to swap my 2wd slash over to brushless and would like an experts request.
@traxrc
4 жыл бұрын
Get a Traxxas system through their Trade Up Program.
@kadenfuller519
4 жыл бұрын
@@traxrc what is the trade up program?
@traxrc
4 жыл бұрын
@@kadenfuller519 Look at Traxxas' Website. It's basically where you trade in your current system and they will give you an upgraded system at a reduced price.
@kadenfuller519
4 жыл бұрын
Ok thank you so much ill check it out.
@kadenfuller519
4 жыл бұрын
@Supnat1 I am?
@talonvaughn6175
4 жыл бұрын
I'm going to have to get one for my rustler 4x4 vxl
@basilyousif3077
Жыл бұрын
Some of the off brand servos work fine the only thing I noticed when I used them was that they sucked the juice out of the battery much faster than more expensive name brand servos. There are a set of off brand high torque servos that I have that I can't even use because they will cause such a high current drain the plane will crash!!
@zeljkogagic2551
2 жыл бұрын
What do you think, max 8 with 4274 combo or the tekin combo for a buggy? With a little bit speed run?
@jacoblynch9862
Жыл бұрын
I don't understand the app seen high ratings and tort numbers needed today for motor vehicles I understand for a big scale or maybe a rock crawler but 20 years ago I bought a JR 8717 it had a transition speed I think of .07 and only 188 ounces of torque. I have ran it in an eight scale, electric buggy, eight scale electric Trogi to savages flux and S ass and never felt the need for anything faster or even anything stronger to turn my vehicle properly now I've been out of RCA for a good 10 years due to health conditions and I ran that servo from around 03 to about that point once again in plenty of vehicles, and never needed more than that 188 ounces of torque it would provide, I do not understand this needing three for 500 ounces in any eight scale vehicle
@stabiel82
4 жыл бұрын
shouldn't you install and use it before saying this is the best budget servo?i got deals from egay 4 servo's waterproof 25 up to 40kg for 50 bucks and i swear by those...
@baraki808
4 жыл бұрын
Same fallowing
@stabiel82
4 жыл бұрын
DS3225 is what the list says...4 x 25kg servo's 41,05usd incl ship....crap i can't post a picture of them...😑😑
@stabiel82
4 жыл бұрын
@@baraki808☝️
@stabiel82
4 жыл бұрын
@Supnat1 ☝️
@stabiel82
4 жыл бұрын
@Supnat1 search on ebay and find that killer deal...i use these on my savage flux xl,revo, tamiya monsters, xo-1 and the blue ones are water proof...all steel gears..comes incl the 25T alloy servo horn etc...20kg up to 60kg servo's..buy in bundle..👍any other questions just let me know👊
@traxrc
4 жыл бұрын
I use the Annimos servos or Power HD servos off of Amazon. Only killed one of the Annimos so far and have been running them for over a year. Never killed a Power HD!
@iks2713
4 жыл бұрын
Do you need an external bec?
@traxrc
4 жыл бұрын
@@iks2713 nope!
@iks2713
4 жыл бұрын
Mine is buzzing when working is it normal?
@traxrc
4 жыл бұрын
@@iks2713 all servos make noise when operating
@iks2713
4 жыл бұрын
Noisy ok but buzzing when it is at his neutral position?
@spike--
4 жыл бұрын
I put a reefs raw 500 in my mt410. Hope it's good. Only $125.
@jonmayer
4 жыл бұрын
Thanks for the demonstration...
@FrizFPV
3 жыл бұрын
I'm confused 😕 you said you were going to put it in the car and test it but did you ever????
@ekj24000
4 жыл бұрын
Savox 1258
@Destronus
4 жыл бұрын
How bout The racestar servos?
@brettludwig7701
4 жыл бұрын
You should start a project where you take a T-MAXX with a junk motor or no motor and convert it to electric!!
@MrHazbobaz
4 жыл бұрын
Remember this guy is sponsored there is way better options out there than what these guys recommend so take everything they recommend with a spoon of salt....
@zellegoodwin9046
6 ай бұрын
Then what do you recommend?
@Hyenatime
6 ай бұрын
@@zellegoodwin90469imod 35kg
@maccamood9159
2 жыл бұрын
Mine just making cracking sound so it trash
@jaredhernandez8753
3 жыл бұрын
Does it fit on 1/12v
@toyminator24
4 жыл бұрын
I can't believe you bashed the Hobby King Servos you can get a servo comparable to your race servos in the $50 range. .14 is too slow .09 or less is better for a budget race servo.
@luciousdrea18
4 жыл бұрын
toyminator24 you ever hear of trackstar? I have one it’s quick .07
@toyminator24
4 жыл бұрын
@@luciousdrea18 yes they make excellent servos
@toyminator24
4 жыл бұрын
@@luciousdrea18 thats faster than my Futaba BLS451 at .09
@MrHazbobaz
4 жыл бұрын
Go get you a JX BLS-HV7032MG it's fully metal gears, fully metal case, brushless, coreless, 0.09s HV, 30kg compact and lightweight for $49
@MarkSantaMaria
4 жыл бұрын
salmonilaUK i’ve heard about this servo but couldnt find it in stock anywhere when i last looked
@longboardluv2
4 жыл бұрын
cool does it work in a rustler?
@thyrandomx
4 жыл бұрын
maybe figure it out and try it
@MarkSantaMaria
4 жыл бұрын
It should work awesome in a rustler
@leoh.7160
4 жыл бұрын
Lol, about 20yrs ago I ran two airtronics servos in my race lst. Those were about 200oz each and cost over $400 for the pair. And the garage is looking good man.
@dominoespizza1756
4 жыл бұрын
I actually need this my servo burnt out the other day
@walkerjohnny72
4 жыл бұрын
this servo as good as a savox 1256 or 1258 ?
@daherbst8720
4 жыл бұрын
Run these in my tlr scte 3.0 and my tlr 3.0 buggy, really fast and good turn!
@a1racer441
8 ай бұрын
Back in the late 90’s early 2000’s when I was racing 1/8th scale buggy servos was either fast low tq like .08 but 120 oz ish or tq slower like 180oz but .15 ish. Servos are so much better and cheaper now days used to cost close to 350 bucks to get 2 servos for 1/8th scale.
@bestamerica
2 жыл бұрын
' i use very good HiTec servos are good on my any R/C tamiyas / traxxases... few futabas servos
@cordellpritchett689
3 жыл бұрын
What’s a great servo for drag?
@vicerichter1163
3 жыл бұрын
any servos for a 1/10 scale?
@overbuiltautomotive1299
3 жыл бұрын
their most all made in chine ill like to cut out middle man out or best yet get a Taiwan made unit or japan but if its a china unit ill go off brand if i can find the good units witch most likely are same as brand name units with out name
@HECTOR-El-Loko
4 жыл бұрын
Bro I have a revo 3.3 I just picked up for $100 bucks. The steering sucks on it!!!!! What do you suggest for a Truck like the revo
@steveruta8746
4 жыл бұрын
I ran another version of this servo (the 100ss, not the 100t) and it was amazing.
@robbryan3044
4 жыл бұрын
While this is an excellent servo for its speed, and torque (I do have one in my TLR 22 5.0 SR), it does have one "problem"...and, technically, this applies to all but one ProTek servo - it's not waterproof. Ok, so maybe that's a bit much to put on this specific servo. My point is, all the other 'major' brands have several waterproof servos. However, the only waterproof servo in Amain's ProTek lineup is the 370TBL "Black Label"...and that thing costs $160. ProTek NEEDS to add more waterproof servos to their lineup. Waterproof servos are NOT just for boats - crawlers can use them, bashers (especially when running on to of water) can use them, rock racers can use them. So, Amain, when ya gonna add more waterproof servos to your ProTek lineup? Mark, maybe you can convince them.
@MarkSantaMaria
4 жыл бұрын
Robb Ryan I wish i could convince them. Good point! The 370TBL is awesome though. Hahaha
@martinbullla7654
Жыл бұрын
@@MarkSantaMaria got a question can you run a Traxxas 3355 receiver on 7.4 v it's the receiver that's in the Sledge and in the hoss any info would be greatly appreciated I heard there are only six v rated but I also heard people running 7.4 v and not having a problem just because the server was rated for 7.4 so I'm just curious cuz I got a hobbywing Max 6 in mine right now in my Sledge because the factory one burned up within two months of owning it and I barely used it they sent me a new one but I haven't put it in because I like the Max 6
@arnulfodicochea6858
Жыл бұрын
@MarkSantaMaria do you know if I can use this for a 1/5 scale gased rc truck?
@chrisdoval7205
3 жыл бұрын
Lmao did you just say rubber grommets lmao 30 years in neverused one lol........ Mark keep malkin vids love the vlogs.love the channel Much love and respect
@rcracer3235
2 жыл бұрын
Good video lots of info what steering servo do you run in your NT48.2 I am building my first kit and need some help?
@Otiesh
Жыл бұрын
Nice video this has come at the time I needed it most, what is the best servo for a 1/7. I am some how confused whether it is ideally ok to just use a standard servo or specific considerations apply.
@flashtech6492
4 жыл бұрын
Hi Mark not related to this video but to use traxxes chargers and have you had any problems with them..and also do you have any recommendations a good chargers..
@jeffbryner5355
3 жыл бұрын
What servo are u running in your tekno sc truck? I have a sc6.1 and was thinking of the savox 1258tg. What's your 2 cents on savox
@martinflawless675
3 жыл бұрын
I recently got a kraton 8s and I wanted to change the servo for better response and speed what pinion and servo would you recommend for about 80-140.00 range
@matthewleedavisofficial
4 жыл бұрын
Hi Mark. I understand the long love for the Revo. I grew up on Traxxas nitro trucks and the Revo 3.3 was one of my first RCs. It will always have a soft spot in my heart of rc memories!
@falcondragonslayer
Жыл бұрын
Would this servo work well in a Traxxas Hoss?
@Shellbackrc
4 жыл бұрын
Is that still good enough for an ebuggy?
@MarkSantaMaria
4 жыл бұрын
I think it should be. Maybe i will put one in my ebuggy to try out.
@Shellbackrc
4 жыл бұрын
@@MarkSantaMaria cool, please let me know how well it performs.
@thyrandomx
4 жыл бұрын
hey Mark can I meet up with you in the future when I go to traxxas hq I live about 500mi away from you and just bash and race our RC's:)
@MarkSantaMaria
4 жыл бұрын
That sounds fun! I need to bring some of my cars to the soccer fields next to Traxxas. Their may be some pretty cool jumps there.
@thyrandomx
4 жыл бұрын
alright thank you hope to see you once everything is done and I can go to traxxas but one thing is all of my cars are broken but it's a ez fix and I need to buy parts that is why I said in the future
@thyrandomx
4 жыл бұрын
oh and I love your vids
@thyrandomx
4 жыл бұрын
lol
@thyrandomx
4 жыл бұрын
I am going to talk to texas oatmeal because I think he works there and see if he could hook us up
@wilsonbatistamendez2385
4 жыл бұрын
I'm new to rc cars, I have a kyosho tki3, which servo would you recommend? Another question are all servos the same for all rc cars?
@raven5347
4 жыл бұрын
An FYI for anyone buying one. I bought 100t from amain. Lasted 2 weeks. Luckily they refunded me and put that money to a hitec hs-7950TH. Haven’t had any problems with it
@shawncartwright338
3 жыл бұрын
That was going to be my comment/question - will it last? I’m un-retiring my Nitro Hyper 8.5 buggy. Had top of the line hi-Tec TG servos on it. They still work like new, and I had plenty of races on them before I mothballed my kit...
@gamesystemchannel6864
4 жыл бұрын
What would you recommend for a motor for traxxas back wheel drive race truck 4 track
@dmoneyg3007
3 жыл бұрын
I need 2 servos for my 1/8 scale E-Revo! What servos should I use 🤔?
@paulpadilla5288
4 жыл бұрын
I like that servo.....ran that in my 2wd stadium truck, 2wd buggy, slash and my sct. Haven't found one better.....seen a few cheaper.....but you get what you pay for!
@rcsubject9844
3 жыл бұрын
What about for a revo 3.3 will it drain the battery
@edwinwx260
4 жыл бұрын
I just got an text from my local track owner after the track has been closed for a while that he is inviting 10 people to come out and run some laps, but my new speedo isn't going to come in in time I do t think 🙃
@johnmiller4553
4 жыл бұрын
👍👍. SMASHED !!!!! 🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙
@jaydiaz8909
4 жыл бұрын
Would I be able to use this servo on an hpi mt2 nitro?? Just for bashing around ? If not would you be able to recommend something around that price range?? Great vid as usual..
@1987fordranger
2 жыл бұрын
Will it work for a traxxas maxx?
@Logan-nr2gw
4 жыл бұрын
UNBOX THE BAJA REY ALREADY PLEASEEEEEEEEEE
@tylerquiroz7860
4 жыл бұрын
Great videos so far every day I check KZitem for your videos
@kevonrcguy2205
4 жыл бұрын
I love Arrma 1/8 servo 14 all day
@flashtech6492
4 жыл бұрын
Hey Mark do you if a Traxxes TQi will bind to a tactic tr 325 receiver..?
@MarkSantaMaria
4 жыл бұрын
flash tech i have never tried but i highly doubt it
@sudamaprasad4334
4 жыл бұрын
It is wonderful car
@mikepyatt5424
4 жыл бұрын
What does it fit? Arrma?
@h.w.m.306
4 жыл бұрын
i laughed when you said 200 ounces was enough. you made me realize how overkill my standard for power on servo's are. i have a freaking 35kg servo in one of my bashers
@Spacecadet0730
4 жыл бұрын
Same here, my 6S Arrmas are not dainty, I try to cram as much servo as I can in them lol
@HognAndRign
4 жыл бұрын
Is this one waterproof?
@NoahRail
3 жыл бұрын
thanks man this helped alot
@GeloOfficialPR
2 жыл бұрын
Video starts at 2:00
@senditcolt.4237
4 жыл бұрын
Let’s go always happy when a new video comes out
@NBubba
4 жыл бұрын
hahaha i have 3 of them .
@gamesystemchannel6864
4 жыл бұрын
For racing
@GearWorksRc
4 жыл бұрын
Cant wait to see the monster truck done.
@Crewchief227
4 жыл бұрын
I run a futaba s9352hv to this day in my 1/8th buggy. Specs are pretty good to this day, and much better than the 9351😉
@MarkSantaMaria
4 жыл бұрын
Yeah the 9352hvs were super expensive... i couldnt afford them at the time... hahaha
@Crewchief227
4 жыл бұрын
@@MarkSantaMaria Yeah still are expensive, but like a good kit vs. a RTR you open up the futaba you can see where your money went. The machining, the PCB, soldering, all top notch👍
@robertryancurry2984
4 жыл бұрын
Keep up the good work and stay strong and focused
@jrc-fabs1634
4 жыл бұрын
No hat today or yesterday?
@MarkSantaMaria
4 жыл бұрын
Yesterdays video was shot about a week after this one... hahaha
@jrc-fabs1634
4 жыл бұрын
Lol
@andrewmouellette
2 жыл бұрын
Hey Mark. I love that little ProTek. Here is another that recently was been released. I think it’s the best budget servo out there as of now. ShiftRC XB. $66 360oz/0.15 @ 6v. 400oz/0.105 @ 7.4v. 444oz/0.095 @ 8.4v IP67 waterproof Steel gear Aluminum center case.
@jeffroberts4644
4 жыл бұрын
What servo would you recommend for 1/8 scale nitro buggy?
@Andrew-hh3ol
4 жыл бұрын
Pro tec savox, or usa-m.banggood.com/DSSERVO-RDS5160-HV-180270-60kg-Metal-Gear-Dual-Ball-Bearing-Digital-Servo-For-RC-Robot-p-1542158.html?rmmds=search&act_poa=POA4907173&cur_warehouse=CN 60kg budget $30 servo , I think it might fit
@Andrew-hh3ol
4 жыл бұрын
usa-m.banggood.com/Racerstar-DS4409MG-120-9_2KG-Large-Torque-Metal-Gear-Digital-Servo-For-1-8-RC-Car-RC-Airplane-p-1584161.html?act_poa=SKUD25506&cur_warehouse=CN&rmmds=detail-bottom-alsolike this one specifically says 1/8 scale and I think it’s faster
@performancedanny
6 ай бұрын
Protek 170sbl
@nathanlengyel9235
Жыл бұрын
Hi, what would you reccomend today with a 150$ish budget for etruggy? Rc8t4e specifically. Thank you!
Пікірлер: 121