Watch as we show you the process to create your own DIY electroplating/electroforming solution. This video is not intended to be an instructional video but an educational video, if you don’t have the proper training please do not attempt this. I will include the Amazon associates links for the products I used below.
Materials List:
* 200g Copper Sulfate Pentahydrate
* 0.05 mL (a drop) Hydrochloric Acid
* 50mL Sulfuric Acid
* Distilled Water to 950ml
* Brighter
Directions:
* Add distilled water to the 950mL line of the beaker
* Add 200g of copper sulfate pentahydrate
* Add 0.05 mL (a drop) hydrochloric acid
* With a stirring rod, or magnetic stirrer, thoroughly stir until dissolved
* Using a syringe or pipet add 50mL of 95%+ sulfuric acid and stir (always add acid to water, never the reverse!!)
Acid Resistant Gloves:
amzn.to/3vIxwnl
Beaker Set:
amzn.to/3VNjeN0
Distilled Water:
amzn.to/3U698Wi
Magnetic Stir:
amzn.to/49rtCwZ
Muratic Acid:
amzn.to/4anvurM
Copper Sulfate (Amazon version):
www.amazon.com/dp/B08QLMY7HG/...
Sulfuric Acid:
www.amazon.com/dp/B08QSJTDV7/...
Electroplating is a process that coats the surface of an object with a thin layer of metal, giving it a shiny and durable finish. However, to electroplate 3D prints, you need to make them conductive first. That’s where the graphite paint comes in. Graphite is a form of carbon that has high electrical conductivity, and can be mixed with India ink to create a paint that can adhere to resin or plastic prints. By applying a thin layer of graphite paint to your 3D prints, you can make them ready for electroplating. You can use different metals, such as copper, nickel, or silver, to achieve different results.
Link to my Patreon. Members have access to download all files and content used across my channel - / icanbuildthat
#howto #electroplating #diy #diycrafts #diyprojects #3dprinting #metal3dprinting #resin3dprinter #resin3dprinting
Негізгі бет Тәжірибелік нұсқаулар және стиль BEST DIY Electroplating Solution
Пікірлер: 21