I was in the market for a holster a couple days ago, saw this video, place my order, and just made a second order. This Werkz M6 holster for the M&P Shield Plus w/ TLR-6 is without a doubt 100% the best holster on the market. The retention on this holster is perfect; yes, you'll hear that secure click. The included bump was ingenious and now I don't even need to put on any of my wedges for proper fit as it fits perfectly. It's already cut for red dot optics and suppressor sight fit. The material is very robust and will probably outlast me. The claw is included as well and this M6 has the claw setup just in the right place, so your belt doesn't need to be over-tighten, yet gives the perfect concealment. It's comfortable too and allows a clear address to the weapon and a smooth draw. And it's made in the USA. I'd honestly rate this M6 holster a 10/10
@tylaw6173
Жыл бұрын
Is the holster open ended to accomadate a compensator?
@tylaw6173
Жыл бұрын
Also how long is the turnaround time?
@SergeantRichGolfing
Жыл бұрын
@@tylaw6173 it only took 3 or 4 days delivered
@SergeantRichGolfing
Жыл бұрын
@@tylaw6173 I’ll assume it will if the barrel is 3in
@likewater1429
9 ай бұрын
What about for left handed people? Can I side carry instead of appendix
@gjamiejmz
5 ай бұрын
Just purchased my M&P yesterday. I realize that I needed a holster and a stream light. This video covers everything I needed to know to make the right decision. Thank you guys.
@nvomund
3 жыл бұрын
Every single video from this channel has been excellent. Keep up the good work!!
@davidalan2469
3 жыл бұрын
I searched "holster for shield with TLR-6" on KZitem and found this great sales tool. Order placed in under 15 minutes.
@WerkzHolsters
3 жыл бұрын
Glad you found us!
@bAc0nBoY755
Ай бұрын
I've never made a buying decision so fast
@gp1941jp
7 күн бұрын
The website doesn't give you an option for the TR-6@WerkzHolsters
@happycamper11
6 ай бұрын
Your very professional presentation of the product, and the demonstration of features & benefits, sold me on this holster. I just ordered it today for my shield plus 4 inch.
@RavenAtmOsphereOyate
2 жыл бұрын
Ordered mine last night, it’ll arrive around the same time the work being done to my 4inch m&p shield plus is finished. Getting the stainless barrel polished 🤙
@WerkzHolsters
2 жыл бұрын
Thanks for trusting us with your business!
@teddymacc13
2 жыл бұрын
How long did yours take to receive? Ordered 2 weeks ago, hasn't even shipped yet.
@WerkzHolsters
2 жыл бұрын
@@teddymacc13 Thanks for placing your order with us! I see your order from Mar 31, 2022, 8:29:58 PM. We do quote 10-15 business day lead time, and I'm counting 6 business days elapsed on yours. Even so I suspect it will ship this coming week.
@teddymacc13
2 жыл бұрын
@@WerkzHolsters Nice social media customer service!! Sounds good! Can’t wait! Thanks!
@WerkzHolsters
2 жыл бұрын
@@teddymacc13 We are thankful to have your order, and look forward to exceeding your expectations on quality. Thanks Tyrone!
@TransformersHoarder
4 ай бұрын
When I clicked the link and I look at the offerings, it looks like you no longer have the designed holster that is compatible with the M&P shield 4” length barrel? The new design looks as if the 4” would protrude?
@johnnytrice6060
Жыл бұрын
So the M&p shield 9 2.0 performance center option on the website will fit both the 3.1 and 4 inch shields.? I'm looking for a holster for the 4 inch shield 2.0 performance center with tlr 6.
@oscardagrouch5095
Жыл бұрын
M6 w/ claw is is us my every day carry with M&P Shield Plus w/ Light & Optic. Use deep set strong side. Thinking about testing different cant. I like this setup.
@WerkzHolsters
Жыл бұрын
Thanks for the feedback! We do have other claws available now as well, in case you want something less aggressive.
@oscardagrouch5095
Жыл бұрын
@@WerkzHolsters I will check it out.
@Psalm91ArmorUp
Жыл бұрын
Does it work without the light, so that I can upgrade later?
@jasonclark4791
3 жыл бұрын
I love your videos . Thanks for sharing and I’ll be making a purchase soon .
@WerkzHolsters
3 жыл бұрын
Thanks for the positive feedback! We are trying to give clear and pistol / light specific information for people to make educated purchases.
@stape510
3 жыл бұрын
Nice. This video could not have come at a better time...I'm about to get a shield plus and tlr-6....have one of your holsters for a glock, and it is a quality holster. Thanks.
@WerkzHolsters
3 жыл бұрын
Thank you for watching! We are happy to be expanding our support of S&W pistols.
@pololoco2964
2 ай бұрын
will this fit a m&p shield 40 with a shr9 adapter with an olight baldr s rail mounted 800lm attached ?
@dcf3601
Жыл бұрын
what about a holster for the S&W M&P 9MM 2.0 (4.25 inch) Spec Series from 2021? it comes with a crimson trace RDS and threaded barrel. I also have a streamlight TLR 7A light. If you hany any IWB holsters for this please let me know. Tanks
@turdboman
2 жыл бұрын
LOVE THE VIDEO, ordered one
@Pfanny_John
2 жыл бұрын
Is the spare mag holder able to be used without the clip? Or will it not have enough support just being attached to the main holster?
@alanvang3028
3 жыл бұрын
This is awesome. I just placed a holster for my shield plus Performance center with the TLR-6.
@WerkzHolsters
3 жыл бұрын
Thanks much Alan!
@Irrelevant554
2 жыл бұрын
Is it quality?
@turdboman
2 жыл бұрын
me too
@alanvang3028
2 жыл бұрын
@@Irrelevant554 sorry for getting back with you so late. The quality has been very good! Fits my handgun like a glove.
@akasqizzed8663
4 ай бұрын
Does this holster allow to use a different brand than stream light. There so expensive lol
@venomgt7299
Жыл бұрын
Hello Shan, is the shield plus holster the same exact model for the 3.1 & 4". I want to put the tlr6 on my 4" Optic Ready PC Shield plus. I haven't found any holster options though. Ive always used Werkz for my Glocks. Hopefully you have an option
@jenjkim92
Жыл бұрын
Do you guys sell the IWB mag carriers for the S&W shield 1.0? Looking for it on the website but can’t find it after buying the M6.
@dormin9795
3 жыл бұрын
Will Shield 9mm without TLR6 holster properly in holster designed for light?
@WerkzHolsters
3 жыл бұрын
Retention is built against the light, so running a holster without the light attached will mean that the pistol will not lock into place, and will only be held down by gravity. We do not recommend this.
@tito10301
Жыл бұрын
my current EDC `00% approved
@guillermosalvadorgutierrez3370
7 ай бұрын
Quiero comprar esa funda y la linterna
@skydancerforever
6 ай бұрын
What belts are the people using in this video?
@elvisbest3213
Жыл бұрын
What about my S&W Shield EZ Performance Center 9mm 3.83" Ported Barrel with a Olight Baldr s attach
@lil_viking6895
9 ай бұрын
What about the shield plus with red dot and crimson trace flashlight?
@treydaypnw
9 ай бұрын
How come you guys don't support the Taurus G-Series pistols?
@tylaw6173
Жыл бұрын
So this definitely fits the Shield Plus performance center 4inch?
@morgankirk3280
Жыл бұрын
Will this fit a m&p 40 4in compact with a hawk gazer hg lg 9
@mickeysmetalart9838
Жыл бұрын
Will this work for m&p 9 shield m2.0 with tlr6?
@kennruckey
2 жыл бұрын
Do you have a holster that accommodates the TLR-10 G
@iamlvthevoice
Жыл бұрын
I have a SW M&P 2.0 threaded barrel with a Gmconn Green Laser on it . I need a holster for it
@LouHemi
Жыл бұрын
Would it fit with red dot or optics? Thanks
@WerkzHolsters
Жыл бұрын
Sure will!
@StefanSu91
3 жыл бұрын
Does this also fit the Shield Plus??
@patrickkelly7371
2 жыл бұрын
He mentions that in the beginning of the video.
@Liittlebrother
Жыл бұрын
@@patrickkelly7371 literally 😂. Not even 10 seconds into the video the guy says it 🤦🏻♂️
@cityfiedredneck6841
Жыл бұрын
You had a customer until I saw the close up of the mag release uncovered. I have a Shield Plus that the mag release protrudes a bit. Not going to risk having to pull my weapon only to have the mag drop out. Is it likely? Probably not. Is it possible? Certainly.
@WerkzHolsters
Жыл бұрын
The main reason we don't cover the magazine release is that when you do cover it with the holster, the holster itself can press into the mag release. I have personally had this happen to me with other holsters that cover it, as well as friends and other customers that have reported the same issue. When it's not covered I have never had a magazine release get depressed. Have you had this happen?
@cityfiedredneck6841
Жыл бұрын
@@WerkzHolsters @Werkz Holsters @Werkz Holsters can't say I have. But I buy, IMO, properly designed and constructed holsters. I just tested the one I carry my Shield Plus in. And with all my grip pressure, I can't make it even touch the mag release. It's just not designed to use a light. If it was, I wouldn't be in the market at all. Take care.
@benniemahdi6130
3 жыл бұрын
I don’t see this particular one on the website for left-hand MP 9 shield plus performance center 4 inch barrel with TLR 6 light
@WerkzHolsters
3 жыл бұрын
That appears to be an error on my part. The holsters are engineered to fit both a Shield and Shield Plus. I have to delve into the database to fix this, but in the mean time, you can choose what you have assuming no difference between Shield and Shield Plus.
@IntenseSpirit
3 жыл бұрын
Is there a tandem mag carrier available for the shield plus?
@WerkzHolsters
3 жыл бұрын
Not currently, but we have a few mag carriers we need t be making... P365, Glock S15, and the Shield Plus!
@2jays270
3 жыл бұрын
Do you guys have a retail storefront?
@WerkzHolsters
3 жыл бұрын
We do not. We do a majority of our order through our website, and a few retail locations around the USA carry our products as well.
@BrightGlandsBristleMange
Жыл бұрын
Will this work for the pistol without the light? Planning on getting the light in the future.
@yungthorough
Жыл бұрын
Why would u take the light off? 🤔💀
@BrightGlandsBristleMange
Жыл бұрын
@@yungthorough Because I haven't bought the light yet lol
@kazninja11
2 жыл бұрын
Is there an optics cut version for the perfomance center models
@WerkzHolsters
2 жыл бұрын
I think that's a good question for S&W.
@SojuLOL
2 жыл бұрын
Do you also have holsters for shield models without the tlr6
@WerkzHolsters
2 жыл бұрын
Check out our holster finder at werkz.com/ to see options including "no light" and the Nightstick option.
@nickogara5962
2 жыл бұрын
Will this work with the crimson trace 770 light?
@WerkzHolsters
2 жыл бұрын
Sorry our lights are fit exactly to the specific light and pistol combination listed.
@HumanBean520
Жыл бұрын
Is your website down or do you guys not make holsters anymore?
@WerkzHolsters
Жыл бұрын
Ha! Yeah, it looks like the search function on the website died, which messed with the holster finder and search function. All back now. Sorry for the inconvenience!
@believeinjesus8300
2 жыл бұрын
Can the iwb be carried effectively on the hip ?
@WerkzHolsters
2 жыл бұрын
It works for many people, but not all. Some people will remove the claw as that can help with comfort. We do offer a 30 day money back so if you find it doesn't work for you, return it in like new condition and we'll refund your purchase price.
@ADMECJC
Жыл бұрын
Is there a part number for this to search on website
@WerkzHolsters
Жыл бұрын
Yes! The SKU is M6SWMPS9STTLR6MPSR
@notsogoodson3764
3 жыл бұрын
do you make one for the shield plus 3.1 with a tlr6?
@WerkzHolsters
3 жыл бұрын
I think this is what you're looking for: werkz.com/amfinder?find=smith---wesson-m-p-9-shield-m2-0-streamlight-tlr-6-for-m-p-shield-9-40-right-119840
@notsogoodson3764
3 жыл бұрын
@@WerkzHolsters ty just made the order
@bricegately
2 жыл бұрын
would love to see a tlr 6 holster for the p365
@johngrunwell2412
3 жыл бұрын
How about an M6 with Glock 26 with TLR-6? Still waiting.
@WerkzHolsters
3 жыл бұрын
It's in our queue! It's not the next one in, but it's on the short list.
@kalonjohnson28
3 жыл бұрын
Still waiting for the M&P 2.0 compact 3.6 with olight baldr
@WerkzHolsters
3 жыл бұрын
Olight now has 3 "Baldr" bodies: "Baldr Pro" (Baldr Pro, Baldr IR, Baldr RL), "Baldr Mini" (Baldr Mini, Baldr RL), and the Baldr S (releasing Monday). We have holsters for the M&P9 2.0 with the Baldr Mini right here: werkz.com/m6swmp294olbalmr.html and we will be coming out with holsters for the M&P9 2.0 with the Baldr S in the coming weeks. Hopefully that helps!
@jerrycasey1635
Жыл бұрын
Sign me up....
@BrandensOutdoorChannel
2 жыл бұрын
Need one for 4" with tlr6 and optic cut
@WerkzHolsters
2 жыл бұрын
Our holsters are currently designed with drop-through for longer slides and we always design with optics in mind. Hope that helps!
@teddymacc13
2 жыл бұрын
just ordered that exact fit. "M6 IWB/AIWB Holster for Smith and Wesson M&P Shield & Shield PC 9/40 with Streamlight TLR-6 for M&P Shiled 9/40, Right, Black SKU#M6SWMPS9STTLR6MPSR
@eli23nyc
2 жыл бұрын
The .45 Shield 4" gets no love????
@WerkzHolsters
2 жыл бұрын
Not at this time, but we do keep a close watch on our request list to see what people are asking for! werkz.com/new-holster-notification
@desert4seat
2 жыл бұрын
Personally, I don’t care about printing anymore. Lol
@WerkzHolsters
2 жыл бұрын
I think many people could or should be less concerned than they are, but there are many who either cannot print (for instance, not allowed to carry at work, but do anyway), or those who haven't gotten to your level of comfort.
@desert4seat
2 жыл бұрын
@@WerkzHolsters very true.
@radiatingfuture1007
3 жыл бұрын
Pick up that draw speed. My grandma running it faster
@god_guns_glory
Жыл бұрын
Great holsters!!! I have two of them one for my M&P SHIELD PLUS AMD ONE FOR MY HELLCAT PRO… I ABSOLUTELY LOVE #werkzholsters @werkzholsters
@TBradley2123
2 жыл бұрын
Does it fit without the light on it as well?
@WerkzHolsters
2 жыл бұрын
I think I best answered that question in this video: kzitem.info/news/bejne/tpCLrqawh5Fpl6A Thanks!
@TBradley2123
2 жыл бұрын
@@WerkzHolsters Thanks! Both great videos. I’ll be ordering one for sure.
@speedmaster001
3 жыл бұрын
Will this work with the shield with laserguard pro?
@WerkzHolsters
3 жыл бұрын
No. Our holsters are custom fitted to the exact light and pistol. Have a great day!
@speedmaster001
3 жыл бұрын
@@WerkzHolsters thank you for the response. The picture shows the holster with an extra material to fit the performance center model. Do you make one that is flush the barrel length of the regular shield?
@WerkzHolsters
3 жыл бұрын
@@speedmaster001 Not currently for two reasons. One is because the claw mount is lower, so we need extra material (to some extent) anyway. The second reason is that we have found that a slightly longer holster is more comfortable. We do understand that this may not be preferable to everyone, but it's what we currently offer. Thank you!
@speedmaster001
3 жыл бұрын
@@WerkzHolsters thanks
@anthonyrodriguez2868
Жыл бұрын
Will this work with extended mag release on the shield?
@WerkzHolsters
Жыл бұрын
Our holsters don't cover the mag release, so it should.
Пікірлер: 112