Thanks for taking the financial hit of buying all of the ebrake handles! In my experience ASD has the best tolerances. It just sucks that they make a handle that’s literally as uncomfortable as it could possibly be
@FieldingShredder
4 жыл бұрын
I couldn't agree more!
@THEKINGOUWANTIT
3 жыл бұрын
I’ve been trying to reach out to them to see if they could make rubber inserts for the holes on the ebrake handle
@durtysouthkustomz8862
Жыл бұрын
@@FieldingShredder the knockoff asd..how hard is it to change the back piece to make it and inline setup..
@JoaquinNeuhaus
4 жыл бұрын
Great video maan! All the info I could’ve used before buying mine... and then having to custom make my own haha
@mlansharma335
4 жыл бұрын
Quarantine content is tough to make and great job dude keep doing what you like 👍🏻👍🏻
@crosbywolfe4725
3 жыл бұрын
I thought I recognized the name. You are by far the most impressive drifter I’ve ever seen
@yazuka91
4 жыл бұрын
i go wow everytime you launch off the starting line in Hyperdrive. what an amazing display of driving.
@LoneStarDrift
4 жыл бұрын
Liked, subscribed, commented, and watching your video lol. I can't believe you bought all these things, I kinda don't believe it lol.
@stardom_fab9144
4 жыл бұрын
I have a very nice handbrake and it lays the master on its side as well. Bleeding it was honestly easier than a upright master.
@dailydrivendiecast
4 жыл бұрын
I cant believe I watched this while thing, i dont even drift!
@charliestavro2843
4 жыл бұрын
Same here lol
@benbob8024
2 жыл бұрын
@Sari3n he meant to say whole vid not while
@benjaminwilkins5650
2 жыл бұрын
Does anyone have a link for the asd knockoff? Couldn't find it
@mawmotorsports
4 жыл бұрын
If this would have been a week sooner video I probably would have bought that knock off ASD one cuz I was looking at it but I wasn't sure on how good it actually was
@allysonlleatherwood
4 жыл бұрын
Much needed info! Great breakdown
@supra750
4 жыл бұрын
No problems with the orientation here, bleeds fine. My ASD pass through is completely upside down in my Z to hide and not hit the brake lines.
@BryanOnofre
4 жыл бұрын
This is amazing content! I’m literally in the market for one right now. I have a question about installing a reservoir on an in-line style master. Is it possible to have banjo reservoir and replace that with a short SS line to relocate the reservoir? I don’t see why not but I’m not sure if that would affect the performance of the master. Obviously try to keep it above the master so that it doesn’t run dry. Is that a good idea? Considering this for packaging reasons in my 2014 mustang
@bubbles8232
4 жыл бұрын
Luv ur channel
@dominodunktank
4 жыл бұрын
This is so helpful! Thanks
@bobayagga2233
3 жыл бұрын
😍😍😍 she drifts
@jonerickson5469
4 жыл бұрын
I’ll gladly accept the donation of a chase bay setup❤️
@robertculbertson4179
4 жыл бұрын
No Parts Shop Max? They're like the OG decent cheap setup.
@AlexNZL
4 жыл бұрын
He said that's what he has in his car now. 23:40
@melissabdr7263
4 жыл бұрын
You do so many usefull videos... thanks man ❤
@charliestavro2843
4 жыл бұрын
Great video! Thanks for the info
@TheChoiceFiles
4 жыл бұрын
Thanks heaps bro very informative Haha. I'm in the market for one at the moment so very handy knowing these things. I love my Part Shop Max one I have in my S13 but my 4 seater cefiro I wana change it up. We will see. Cheers bro
@PGHdrift
3 жыл бұрын
Def checking out that chase bay one. The z is super tight and that looks like a forever handbrake.
@travisstamp7428
2 жыл бұрын
Is there a 2 way hydro e brake? Like pull it to lock the rear and push it to lock the front (like line lock)?
@JayWelchy
4 жыл бұрын
Holy Hydros batman ... cool vid, great info. Side question: your girl ever show interest in driving/drifting, as in learning how?
@christopherrogers8316
2 жыл бұрын
do u know if the chase bays pull up would work in my ep3 civic?
@DiegosFloorLover
3 жыл бұрын
All of them, I’m installing all of them.
@heathatkins2837
3 жыл бұрын
Thanx Fielding!!
@aemsignite7144
4 жыл бұрын
Are these hand breaks mad for real drift or sim racing because I searched for these for sim racing but ether way it's a good video
@chadg6874
Жыл бұрын
The "pretty good bang for the buck one," was that the Osias or was it the Kyostar brand on Amazon? They look the same but i don't know which one he has.
@alfonsomolina9143
3 жыл бұрын
i like the last one ebrake pull back stile thanks for the info i am building drift car rx7 fc reakky good info thanks
@ColtonRMagby
2 жыл бұрын
I'd just hold the hydro e-brake while I set the regular parking brake. Much simpler.
@rogermartin1984
Жыл бұрын
I need one for a parking brake that last at least long enough to chock the wheels. Which is the advantage of one with a reservoir? Is it easier on the Master Cylinder? The obvious disadvantage is the possibility of spillage or getting in the way of something.
@Teysik
4 жыл бұрын
My older chase bays had some slip in the same area. Maybe not as much. It doesn’t really bother me
@666uNdying666
4 жыл бұрын
great vid bro, are you planning on making some simulator drifting vids during the quarantine? would actually be sick to see a real drifter compare the 2 and have some fun on assetto corsa or something like that
@FieldingShredder
4 жыл бұрын
I plan to yeah but i'll be honest I SUCK at sim drifting haha
@666uNdying666
4 жыл бұрын
Fielding Shredder just got into it myself a week ago so we both suck xD anyway would be fun to see you get better and all, excited for the vids )
@davidmartinezotano7215
3 жыл бұрын
Can somebody tell me what is the name of Handbrake at 17 minutes?
@supdougs4487
9 ай бұрын
Find it?
@XskiXedgeX
4 жыл бұрын
It's like you you were reading my mind with the need to make this video... scary. lol
@Mitutumuch
Жыл бұрын
im probably grabbing a $50 one nocap.
@v8tergt653
2 жыл бұрын
How can I find it he knock off asd $90-100 one?
@kylegwyn4172
4 жыл бұрын
Please do a video installing one of these in a daily car for funsies
@slipknotfan2217
4 жыл бұрын
Chrisfix has a good video on this
@AWSimDrifter
4 жыл бұрын
Really appreciate this video, thank you. I've been looking at the knockoff ASD handbrake as a replacement Fanatec handbrake for my sim rig and so it's nice to know the quality is up there. As I don't actually have one or worked with one in a real car, I'm unsure on what fittings to use for the brake lines. I'm UK based so bear that in mind, but can anyone point me in the right direction please? Should I use AN3 fittings? I'm confused.
@LoneStarDrift
4 жыл бұрын
2 minutes into the video I got super disappointed because I thought you were going to mount them all in your car and use them lol.... But you don't : /////
@ShawnT_1JZ
4 жыл бұрын
that one that is 90-100 that copies the asd i bought and built a real working hydro for my sim with, uses a 1000psi pressure sensor and a wilwood clutch slave, and a DSD control board, so far its been great. nit tjay rubber thing in the master lip/cap somehow expanded and it touches the bottom of ther master, not sure if its supposed to uncollapse and do that but makes it hold less fluid then i thought it should,
@AWSimDrifter
4 жыл бұрын
Awesome, I was planning to do the exact same thing with the knockoff ASD. Can you show me the parts list you used please? This is the parts list I built, can you tell me if it's correct please? imgur.com/a/qsPk8I8
@ShawnT_1JZ
4 жыл бұрын
@@AWSimDrifter i think you have everything needed. just double check with this link. this is what i followed www.isrtv.com/forums/topic/10762-dsd-hydraulic-handbrake-diy-project/
@michaelriccardi424
3 жыл бұрын
I'm thinking about purchasing the chase bays handbrake. Would it be crazy to drill the hole bigger and use a sheared bolt with a lock nut for perfect fitment?
@ivarsmatisons
Жыл бұрын
Paldies par informaciju 0:14
@yeetskeet102
3 жыл бұрын
I used this video to look for good hand brakes for my sim set up😂
@doubledpizza1413
3 жыл бұрын
Does anyone have the link to the knock off asd that was actually halfway decent?
@joshobrienbrixrealestategroup
3 жыл бұрын
did you find the link
@supdougs4487
9 ай бұрын
??
@keenankircher7492
4 жыл бұрын
Just bought the chase bays reverse mount pass through style, just getting into drifting,thanks for all the good info
@dempseyharris3052
4 жыл бұрын
Did they fix the tolerances?
@keenankircher7492
4 жыл бұрын
@@dempseyharris3052 mine does still have that play in it unfortunately,you dont really notice it when using it though
@chrisdillon512
2 жыл бұрын
How did bleeding turn out with the sideways set up? How's the pull on it?
@keenankircher7492
2 жыл бұрын
@@chrisdillon512 bleeding was easy, just the same as if the handbrake wasn’t there , it felt good but definitely get hawk go plus pads from the get go , handbrake didn’t work to well until I got those
@deantaylortimeattackuk1996
11 ай бұрын
Is there any lightweight handbrakes that use the OEM brake cable
@zmohan69
4 жыл бұрын
Surprised u didnt review the villians handbrake.
@izaak1509
3 жыл бұрын
Kinda funny I ended up buying the same style of handbrake at 11:29 for my pc sim set up.
@MXX265
2 жыл бұрын
I run a small one man engineering / cnc machining shop. I designed and developed that hand brake in Australia. It was tested in the revs rotary drift car and our dirt circuit car, before I started small batch production runs and sold maybe 20 overseas as a premium product. It had no free play at all and run replaceable nylon bushing and a hardened ground pin. At that time it was one of the only fully billet hyd brake on the market. Unfortunately a customer sent theirs to China and copied it exactly (except the quality of machining and materials) and even used my business name to sell them for a fraction of the price. I couldn’t buy the race quality slave cylinder in my kit for what they are now selling the complete, cheap Chinese knockoffs for. The latch was included as our dirt circuit club pits is on slight slope and the handle can be reversed to run in a standard handbrake position.
@Notblakewilson
4 жыл бұрын
Fielding do you drift/drive in sim? I saw that fanatec e-brake haha. There's a huge drift community on assetto corsa (the original not the new compitizione one) that would love to drive with you. There's already a bunch of pro 2 dudes streaming and making content on there too because of everything going on so you would fit right in!
@FieldingShredder
2 жыл бұрын
i tried to but i SUCK at SIM drifting lol, its frustrating
@richardosborne7641
2 жыл бұрын
Do you recommend a certain type of brake pad to work with the hydro I just have cheap no-name pads I think maybe from 1aauto And they take forever to heat up and start working
@Stature17
Жыл бұрын
How do I pick size? 3/4 or 5/8?
@Bergeron_44
2 жыл бұрын
Do 5/8 master cylinder is enough for a 128i bmw
@gibbs-13
2 жыл бұрын
I was wondering where the USB cable is
@MrRando-cs1sn
4 жыл бұрын
3 minutes in I realize these are real and not for a pc.
@LycheeMonstaMedia
4 жыл бұрын
I've got a Chase Bays pullback and can't wait to get it installed! What do you prefer standalone or pass through?
@FieldingShredder
4 жыл бұрын
I prefer stand-alone or dual caliper setup personally. I like independent control of foot brake and hand brake :)
@throttlebuddies1
4 жыл бұрын
@@FieldingShredder Love chasebays stuff but one complaint I have is my reservoir tends to leak a bit from the bottom. They were nice and sent me a replacement o-ring to fix it but longterm can become a pain.
@FieldingShredder
4 жыл бұрын
@@throttlebuddies1 try using some permatex thread sealant on there it should fix it for good!
@gregmaday9
Жыл бұрын
Can u run a inline with a master ?
@lancow1234
2 жыл бұрын
What brake is he talking about a 3 min?
@joshobrienbrixrealestategroup
3 жыл бұрын
what's the top 3 then?
@kiyu6995
2 жыл бұрын
Is this for game ?
@velgenenzo1172
3 жыл бұрын
you competet in hyp beast
@jamesthompson261
4 жыл бұрын
You mentioned the simulator handbrake do you have a simulator and wanna bang doors on assetto? 👌
@jamesthompson261
4 жыл бұрын
Also used to have the pistol grip handbrake with the metal rod lock it cost me qualifying the welds broke away where the cylinder mounts up
@nichobarricco5149
2 жыл бұрын
Fever lever
@mikeylawalker
3 жыл бұрын
I just installed the gktech budget inline hydro in my g35 and it's super stiff and i basically need to pull on it with both hands super hard to get it to lock (obviously not ideal for drifting lol), I'm pretty sure it comes with one of those universal 0.7 masters, anyone know if this would be a bleeding issue or if the master is just junk?
@byLpz
2 жыл бұрын
looking into a gktech rn, did you figure this out?
@mikeylawalker
2 жыл бұрын
@@byLpz leverage was my problem, I had it mounted pull up style in factory location and my bucket seat was blocking my arm from pulling it up all the way. I attached a pipe to it to lengthen it and it worked perfectly. Also replaced the master with a wilwood 0.625 so that might’ve helped too.
@06RHDSUBIEWAGON
3 жыл бұрын
Wanna sell any lol
@repurposedperformance5762
4 жыл бұрын
has it clicked yet that you spent $1k+ on E-Brake handles for less than 3k views?
@melindaortiz9741
3 жыл бұрын
He tried
@williampetersen5820
2 жыл бұрын
what is the brakes name at kzitem.info/news/bejne/pXltmWVsgZaKhIY
@Aindok
2 жыл бұрын
you put all ebrakes there talked about one of them for a while ....... wtf man
@Nicholas_Meregali
4 жыл бұрын
13:18
@Zohar-Modifier
3 жыл бұрын
He bought more handbrakes than female ...
@jort93z
3 жыл бұрын
Maybe a dumb question, but how do you park your car on a hill if the handbrake doesn't lock in place?
@onlyetm
4 жыл бұрын
Planing on building my own as I'm cheap and is something to do. Going to combine some cheap ones as none of them fit for what I'm going for.
Пікірлер: 102