I just ordered this after watching your video through the link. Had been waiting for the prices of Legundary risers to come down, no more waiting. Thanks for all the info.
@RoshanSridhar
2 жыл бұрын
Cheers bro, thanks a lot for your appreciation ❤️
@garagewheelz
4 жыл бұрын
Just got an update from Carbon Racing that these Handlebar risers are temporarily suspended since the vendor manufacturer have given a different price calculation which isn't making them a profitable margin. So the product might take many more months to come back until they work on sorting things out. If it's gonna come back the price might be higher. For now the better option would be HDT customs or RAW accesories who sell this for 1900 and 1800 rs respectively.
@RoshanSridhar
4 жыл бұрын
Ok bro am not sure about that. One of my friend had enquired and got the reply that it would be in stock by one month.
@garagewheelz
4 жыл бұрын
@@RoshanSridhar may be, but I personally got this information from a conversation I had with CR about an hour back.
@RoshanSridhar
4 жыл бұрын
Cool bro thanks for the info
@bipinchandra8080
4 жыл бұрын
Thanks a lot for the info bud. The company hasn’t gotten back to any attempt of me trying to contact them.
@The_Name_Is_Rider
3 жыл бұрын
You are right. We were given wrong calculations but since we had started pre-orders, we honored the orders and took the loss. We were waiting for our own machinery, so that we can bring them back at the same cost again. Now we have started manufacturing them. We will have the new stock in a week and we wont go out of stock anymore, as we can make whenever we want now.
@vincenzoimondi1833
Жыл бұрын
Hi Roshan I really loved your clear explanation to the installation of the handlebar riser. I too have an Interceptor and have installed lots of aftermarket parts. So for that I need to browse in Utube. The problem is that if I follow the instruction, the speaker starts with English but then soon switches over to Hindi. Because I don't know Hindi it becomes very difficult to follow. Therefore I'm so happy that you stayed on the english version and btw the presentation was first class 😃 thanks 👍 Vinci
@RoshanSridhar
Жыл бұрын
Thank you so much for your support 💗 cheers
@chrispulham4779
Жыл бұрын
Hi Roshan, how do you find the wind buffeting with that wind screen?, bar risers look great. Cheers.
@mkgandhi63
3 жыл бұрын
I lived in maduravoyal for 5 years . Use guru sevak exhaust for interceptor . I'm using it from last 1 year , it provides good thumping sound , look original and not heated at all .
@RoshanSridhar
3 жыл бұрын
Coool.Bro, will Try it 👍
@mkgandhi63
3 жыл бұрын
@Chauhan Raghav No air filter changed . Exhaust shaving no effect on milage.
@RoshanSridhar
3 жыл бұрын
Thanks Bhai❤️
@somil07
2 жыл бұрын
That's a beautiful music you have playing in the background. Which one is it?
@Alex-io6ky
2 жыл бұрын
thanks for sharing and love the camera work
@shantanumukherjee191
2 жыл бұрын
Very good video..
@cosmiccabaret
Жыл бұрын
Nicely explained. I am waiting for similar raiser to be delivered in UK. I watched video to see if the original cross support piece could be seen or not? I also like the look of those touring mirrors. Is the view behind the same as original mirrors. They look as if they don't extend out as far as the original chrome ones.
@RoshanSridhar
Жыл бұрын
I have removed the cross rod. It's my personal choice and not any issue with the riser. So don't worry. Yes touring mirrors are great actually. Better visibility in case of night rider. Not much reflections from the lights behind the rider. Doesn't vibrate also. It's the same position as the stock with more adjustability. They are increased in price by almost 50% since I got them. Don't know why..but still worth it
@AnupKumar16
3 жыл бұрын
Hi Bro. Please make a video of pillion footpegs shifter.
@subinharidas6030
4 жыл бұрын
Hello roshan, from Kerala. I must say that your presentation is superb. Do you have any idea about short handle bar for interceptor? If you have, make a video.
@RoshanSridhar
4 жыл бұрын
Thanks A lot Subin. I dnt own one but MkDesigns make a short drag handle bar. You can see it on thier insta handle with the same name. And a detailed video is made by youtuber 'radmoto' on the same. You can see it if you haven't already.. 😊
@subinharidas6030
4 жыл бұрын
@@RoshanSridhar thank you Roshan
@RoshanSridhar
4 жыл бұрын
Anytime 😊
@thomasvinoy5291
4 жыл бұрын
Nice video very informative
@RoshanSridhar
4 жыл бұрын
Thank you Thomas😊 Glad you liked the video ❤️
@screenrecording3957
3 жыл бұрын
are you facing any issue with the Risers? from the installation video it looked but tight.
@RoshanSridhar
3 жыл бұрын
No bro I used it for a month. It was fine. Later I gave it to my friend who was from Orissa. He's 6'2 inches tall so he really needed it then . Later it went out of stock...so didn't buy it yet. If you're finding it too tight...then just get it to a mechanic ...he will rewire your setup...and you won't face any issue. The company did tell that you need to rewire...I could just fix it without it as u saw on the video
@dheerajdalal3026
4 ай бұрын
Thanks bro
@SanKiranKReddy
Жыл бұрын
Great information bro👍👍im little less than your height !! So it will help for me I’m worried about cable routing.. as it says !! Are you sure we don’t need cable re routing if so great otherwise need it visit RE guys for this work !! I just completed 2 k long drive on interceptor hand give workout type pain .. hope risers do solve
@RoshanSridhar
Жыл бұрын
I could manage without re routing bro. Do check out AOM handle bar too . It has better relaxed feel and height than the stock handlebar. I have that one my bike now currently
@gauravarora2986
3 жыл бұрын
Nice details bro..simple and straight! Can I get these in Canada?
@RoshanSridhar
3 жыл бұрын
Thanks Gaurav ❤️ I am sure they will deliver , probably you would have to bear additional shipping charges. You could ping 'Carbon Racing' on Instagram. They will help you with your order bro
@rebel2139
4 жыл бұрын
Excellent video bro, do an RRP exhaust review
@RoshanSridhar
4 жыл бұрын
Thanks A Lot 😊..Sure Bro I will try ro get hold of some one with Custom Exhausts
@Passbyman
3 жыл бұрын
Sir will be there any problems to wires after installing these risers...
@RoshanSridhar
3 жыл бұрын
Bro Personally I didn't need wire re-routing as you can see from my installation video. But if your wire is tight while installing, you have to re-route it. This is recommended by Carbon Racing also in their product description. Personally I didn't have an to problem with the wires after installing the risers. If you're skeptical , then take it to a mechanic. He will install it after adjusting the wite
@chakrapanid6089
4 жыл бұрын
Which windscreen is better Carbon Racing or Puig for Interceptor 650?
@RoshanSridhar
4 жыл бұрын
Hey bro. If I had to purchase today...I would go for the Carbon Racing one. 1 . It's taller and wider than any windscreen available for Int650. Mounting is in two places so more stable. And lastly price is 1/3 of Puig .. so it's my clear choice. Since I already own a Puig ...I didnt want to spend money again on buying another one......cheers...hope it clears ur doubt. Happy Riding 😊
@chakrapanid6089
4 жыл бұрын
@@RoshanSridhar Thanks for the quick response. I also have the same two bikes as you. Classic 500 and Interceptor. Is the Carbon Racing windshield interchangeable between both the bikes? If yes then it is fantastic...
@RoshanSridhar
4 жыл бұрын
Hey the windshield is same for both but the mounting will differ, so u can't use the same set for both. Carbon Racing offer only the mounting brackets seperately as well. You can enquire about it with them and purchase the mounts seperately . Pls check with them
@hrishikeshoulkar5526
Жыл бұрын
Hi, I have installed this riser. But after riding approximate 1000 kms the handle got loosened and was moving. It's my good time that I was not driving when this happened. I m worried that this should not occur again. Did you face this similar issue. And what may be the reason for this
@venkateshg3171
3 жыл бұрын
Hi bro, I am 5 foot 6 inches tall. Do you recommend this risers or aom handle bar for comfortable touring ?
@RoshanSridhar
3 жыл бұрын
Hey Bro. Yeah u get a good feel when u add rides.. gives you better comfort while riding long hours and also it provides good support when you saddle during off roading
@sunilukhalkar
3 жыл бұрын
I’m planning to install this handle bar raiser . Is there any issue in wiring after installation. Pl let me know
@RoshanSridhar
3 жыл бұрын
Hey Sunil....as you see from my video, I didn't have any issues with the wires...I didn't rewire it nor did I feel it tight. But few users have told that wires were tight. Carbon Racing Company says that rewiring is needed. If your planning to install it in a mechanic shop or garage.. They will take care of this..Cheers...Happy Riding 🙂
@sunilukhalkar
3 жыл бұрын
@@RoshanSridhar I checked on the site it is showing “out of stock” . Pl suggest.
@RoshanSridhar
3 жыл бұрын
No bro it's available. Here's the link carbonracing.in/collections/interceptor-650/products/angled-aluminum-handlebar-risers-for-interceptor-650
@ardongabriel2607
3 жыл бұрын
I'm 6ft. Will this handlebar riser be good for me?
@RoshanSridhar
3 жыл бұрын
I am 5'10. I am comfortable with this . You will surely feel more comfortable with this at you height. More relaxed riding position
@ardongabriel2607
3 жыл бұрын
@@RoshanSridhar thank you
@sprog7998
4 жыл бұрын
Hemant of HDT customs, Mumbai has developed similar riser many months back. His price is 1900/- including shipping. Is there any difference between the two?
@RoshanSridhar
4 жыл бұрын
Hey bro I am not entirely aware of the specs of HDT customs risers. This carbon racing riser gives a height increase of 4.2 cm and also an inclination towards the rider for 2.1 cms. This costed me 2200 with shipping included. The build, finish and paint scheme is v good on this. Fitting also doesn't require much effort. This is available is black and chrome finish
@aryans4716
4 жыл бұрын
@@RoshanSridhar Hi Bro, great video and much needed being a Interceptor Owner. One question would like to ask, as you mentioned there is no need to extend the cables and all.. its jst a plug and play but are the stock cable being stretched too much and any tension to cables while turning? Thanks , Ride Hard n Stay Safe !
@RoshanSridhar
4 жыл бұрын
I didn't feel any issue with it dude..I did it by myself... initially I did feel like I was going to stretch the cables...but slowly I sort of pulled up the cables from the bottom. I didn't feel any issues while turning too...If you're v unsure...u can go to the local mechanic.....they will just reroute it for 100-200rs..in my case I didn't feel any issue after I installed the risers...Cheers bro...Keep Riding...Peace ❤️
@shallymalik
3 жыл бұрын
Bro i am 6 feet Do I need straight one of angled once Plz guide
@linhammarak7248
4 жыл бұрын
Hello sir can you please give me some idea on how to order handle bar risers from carbon racing for Interceptor 650
@RoshanSridhar
3 жыл бұрын
They are currently out of stock for this risers I gues...you can ping them on Instagram. Or try their website. Link in in my description bro.
@SoumendraBagh
3 жыл бұрын
They are back in stock now.
@arijitganguly1758
Жыл бұрын
Any experience with these on the hills? Any impact on the maneuveribility and sportiness?
@RoshanSridhar
Жыл бұрын
Not bro you will get used to it in a couple of days. Not much of a difference in riding style of maneuverability
@arijitganguly1758
Жыл бұрын
@@RoshanSridhar thanks 😊
@mohdhaq640
2 жыл бұрын
Shukriya bhai
@RoshanSridhar
2 жыл бұрын
Dhanyawad ❤️
@hrishikeshoulkar5526
2 жыл бұрын
Hi Rohan , are the inclined riders tuff enough in all terrain
@RoshanSridhar
2 жыл бұрын
Yes bro, haven't faced any issue with it . I have changed my handlebars now though to AOM bars
@sait33
3 жыл бұрын
🙏
@RoshanSridhar
3 жыл бұрын
Thanks 😂
@nischal4444
3 жыл бұрын
is that a smk dual sport helmet you are using? do you get any neck pain with this helmet when doing triple digit speed?
@RoshanSridhar
3 жыл бұрын
It's From a Italian Brand Called Caberg bro. Available on Amazon. It's not much heavy. If u pick the right size. It will balance its weight on ur cheeks. If u buy loose fit. Then all the weight will be on top of ur head which will give u neck pain. This holds true for all the helmets ...This helmets front beak can be removed too...its better aerodynamicaly without the beak
@nischal4444
3 жыл бұрын
@@RoshanSridhar thank you. good luck
@RoshanSridhar
3 жыл бұрын
You too Bro ❤️
@garagewheelz
4 жыл бұрын
Is this available in Motogear TNagar or just available online ?
@RoshanSridhar
4 жыл бұрын
No bro, this is available online only as of now. Link is provided in the description. You can install it by yourself.
@garagewheelz
4 жыл бұрын
@@RoshanSridhar Yes, I did see that.. this is looking fantastic ... I'm waiting for my friend who is working on a moto-one replica prototype.. if that isn't coming out well id choose this in Chrome.
@RoshanSridhar
4 жыл бұрын
Ok Bro Sure. This doesn't look like a third party Accessory. It's paint finish is v good. And the height and inclination is v good too for comfortable touring . Cheers . Happy Riding 😊
@garagewheelz
4 жыл бұрын
@@RoshanSridhar definitely CC is good nowadays with their products and quality for the cost they offer.
@RoshanSridhar
4 жыл бұрын
Yes V much Indeed. I usually dnt like third party Accessories because they have cheap look and build quality and their fitting seem to be off.. But CC Accesories are v good
@motovin77
2 жыл бұрын
I see you fitted without cable rerouting, can you move handle bar to full left and full right and confirm if any of the cables are getting stretched?
@RoshanSridhar
2 жыл бұрын
Hey I didn't have any issue post installation. I could move the handlebar from end to end. I dnt think any wires wete streched. I didn't pull any wires while installing. Now I have installed AOM handlebars, that required rerouting
@motovin77
2 жыл бұрын
@@RoshanSridhar great thanks, is your bike BS6?
@RoshanSridhar
2 жыл бұрын
@@motovin77 no bro it's bs4 model. I got it on the first batch of production. My friend recently got a bs6 model
@biker123cool
2 жыл бұрын
@@RoshanSridhar hey are AOM handlebar better than using carbon racing risers for touring comfort?
@RoshanSridhar
2 жыл бұрын
Hey I have replied to you on Instagram. Sorry for the late reply. Was out of town
@jasmeetkang4010
4 жыл бұрын
Where can i get those handle grip from ?
@RoshanSridhar
4 жыл бұрын
Hey bro it's from a company Called 'TripMachine' you can browse and them and see. This product is called vintage wraps. Cheers😊 You can buy it from Amazon or their site
@johnlethals
3 жыл бұрын
So... i tried to install the same product and the handlebar couldnt reach the seating position... Did you do any adjustment with the wires ?
@RoshanSridhar
3 жыл бұрын
I didn't do any extra Adjustments for the wire bro. Whatever is there in the video. It was the same. I just pulled the wire a bit to make it loose...if urs is tight then u would have to rewire them I gues..even Carbon Racing team has told that rewiring is needed. I tried mine and it worked without Changing anything
@johnlethals
3 жыл бұрын
@@RoshanSridhar thank you...
@RoshanSridhar
3 жыл бұрын
No probs bro
@jjolieira6531
3 жыл бұрын
good morning friend i would like to acquire this brazil but i am from Brazil there was no change in the throttle cable hug JJ Brasil
@bhaskar_mayur
2 жыл бұрын
Hi Roshan. I have ordered these raisers after watching your video. It's been 10 months and one of the raiser colour faded away and other raiser paint is getting peeled off. Is there any warranty for them.
@loverboy-ow7os
4 ай бұрын
Which colour you bought silver or black?
@bhaskar_mayur
4 ай бұрын
@@loverboy-ow7os black
@loverboy-ow7os
4 ай бұрын
Bro what is the long term review of these risers . Can i go with it ?
@bhaskar_mayur
4 ай бұрын
@@loverboy-ow7os definitely you can go with them. You will feel bit strange in the initial days but later you will get used to them. They provide comfort for long rides. You might need to reroute the accelerator cable if it's tight while turning. My suggestion is to go for steel colour to prevent fading of black colour.
@loverboy-ow7os
4 ай бұрын
@@bhaskar_mayur thanks a lot bro 🙏
@indrishmo
3 жыл бұрын
Will this fit a Meteor 350?
@RoshanSridhar
3 жыл бұрын
No bro...This Won't won't work . This is explicitly for Int 650. Carbon Racing would probably make one for Meteor 350 soon. Can you ping them over Instagram and ask them?
@nisharani.r1568
4 жыл бұрын
What is you height bro
@RoshanSridhar
4 жыл бұрын
Hey My height is 5'10 .😊
@shallymalik
3 жыл бұрын
@@RoshanSridhar bro my height is 6 and I am planning to buy interceptor Would I be all be needing risers Coz I like upright position in all bikes
@JigneshPatel-ji7ir
2 жыл бұрын
Bro what about ABS cable?? Did you reroute it?
@RoshanSridhar
2 жыл бұрын
No bro I didn't need to reroute. Some people did reroute and messaged me actually. It would be better if you take it to a mechanic if you want to reroute .
@JigneshPatel-ji7ir
2 жыл бұрын
@@RoshanSridhar Thank you for info bro.
@BlogrB
2 жыл бұрын
I routed all the cables from inside. And the cables are now not streaching anymore
@RoshanSridhar
2 жыл бұрын
Is it working fine or are you having problem?
@BlogrB
2 жыл бұрын
@@RoshanSridhar its perfect. I am aged 43 and 6 feets and the seating posture is now much better. No issues with the bike either.
@RoshanSridhar
2 жыл бұрын
Very good to hear about it. You can tilt the handle towards you more if you need. If you do so, then tilt the handle left/right and see if it touches the tank while cornering
@ardongabriel2607
3 жыл бұрын
do I have to extend the wires or ?
@RoshanSridhar
3 жыл бұрын
I didn't need it as u could have seen from the installation video. But few users had commented that their wiring was a tight. The product's website says that it needs re wiring. If it's tight for you , you can probably reroute the wiring
@ardongabriel2607
3 жыл бұрын
@@RoshanSridhar thank you
@shallymalik
3 жыл бұрын
Which windshield is this bro 🙏
@RoshanSridhar
3 жыл бұрын
Hi bro, this is from a company called PUIG. I have made a video on this too. See my other videos
Пікірлер: 119