*Works well for a DIY home improvement job **MyBest.Tools** A little sloppy in the cut. Water reservoir is too small. Cut one 20" tile - time to refill.*
@maydanlex
Жыл бұрын
Just pulled off an angled cut on a 48 by 24 inch porcelane tile..never could have done it without your KZitem channel...many thanks !!! (You're a Rock Star in my book)
@LandbergTileTV
Жыл бұрын
Thanks brother, appreciate it!
@mbuffington3
4 жыл бұрын
Been using MK 101 saws for years, upgraded to the 36000 about a month ago and it's been amazing. Keep up the great videos man!!
@LandbergTileTV
4 жыл бұрын
Thanks! Will do!
@smokymountain4222
Жыл бұрын
The mk is obviously a superior saw
@JoeSmith-be3ur
2 жыл бұрын
RIGHT ON ! JUST BOUGHT ONE FOR MY WIFE WE HAVE 24X48 PORCEALINE TILES SO THE FOAM BOARD HELPS WE HAVE TWO. D24000 DEWALT SAWS NOW THE D36000 1100.00 HOMEDEPOT DELIVERED NO STAND. BUT...THE D24000 STAND FITS IT
@ronmcgowan
6 ай бұрын
Great video! My only request is that you do a video showing you break it down for transport. As heavy as it is, it would be nice to know how manageable it is by myself and how it would get packed up. Thanks!!
@LandbergTileTV
6 ай бұрын
Thanks for the idea!
@davidalejandre6869
Жыл бұрын
I just bought one can’t wait to test it tomorrow 🎉
@phoenixmacallan763
4 жыл бұрын
Great video brother. I've been waiting for this one since the first one you did. God bless 🙏🏻👍🏻👊🏻
@LandbergTileTV
4 жыл бұрын
Yes sir! Thanks for the watch 👊
@phoenixmacallan763
4 жыл бұрын
@@LandbergTileTV No problem brother. Thank you!🙏🏻👊🏻
@InheritVocs
4 жыл бұрын
Just got this saw. It’s awesome so far!! Thanks for the vid dude. Very helpful!
@LandbergTileTV
4 жыл бұрын
Great to hear!
@petetakingover1550
4 жыл бұрын
great job and great movie !! love the channel. keep up the good stuff !!
@LandbergTileTV
4 жыл бұрын
Thanks, will do!
@pf5658
3 жыл бұрын
Even glass too. Wow! Awesome.
@teh60
4 жыл бұрын
Great video. That saw is amazing. I just bought a D24000 and its awesome.
@LandbergTileTV
4 жыл бұрын
Nice 👍
@Tako2e
4 жыл бұрын
Gotta get me one of these. And more shower ideas braddah always love those 🤙🏽💯
@LandbergTileTV
4 жыл бұрын
I have more coming up! I'm finally healed up so I can get back to it 👊
@MostlyPeacefulCombatVet
4 жыл бұрын
Damn it! From the start, I was like, meh....... We've been fine running our D24000's for a decade. Then you mitered that 12x24 face up. Done! Sold. 2 of my D24000's will go up for sale in about 10 minutes. 2 D36000's will save an astronomical amount of time on our large jobs full of outside miters and/or returns..... Which is what we are known for doing with perfection. But also, mitered inside corners, with all of these beveled and 3D tiles.. We also do alot of quartz, marble, corian, stone, etc. Miters for days. It pays the bills. So Bring it on! I may as well tell myself, this will justify my 2 new saw purchases... Large format 2x4 being an easy single person task on the saw, that's also a huge deal man. Super stoked to beef up the collection. 👍💯 Thanks for the video brother! To the point, with proof. Gotta love it. 🤘 Take care @Landberg Tile TV 👊
@LandbergTileTV
4 жыл бұрын
Thanks brother! Appreciate the comment! 👊
@جمالحياور
2 жыл бұрын
شكد السعر اخي
@buczi82
Жыл бұрын
I really want buy one of them but I'm really disappointed about 45 degree cut. I see you cut tile but only the long side but what about short side ? Can't because tile is to long (mean to wide). What maximum wide you can cut ? 30cm wide ? Shame, probably must buy Rubi or similar:(
@mattjudy6780
4 жыл бұрын
Good video. I didnt like the D24000 but that ripping capacity on this one is nice. Cant believe they didnt add a gravity stand. Or atleast one with some wheels.
@LandbergTileTV
4 жыл бұрын
Gravity stand might come soon
@mattjudy6780
4 жыл бұрын
@@LandbergTileTV good to hear
@mattjudy6780
4 жыл бұрын
@@LandbergTileTV i just didn't like the way the 24000 was put together. It cut fine but was a pain to transport.
@edjenni6761
4 жыл бұрын
Love your videos. I am trying to find a wet saw that will serve all my needs which d36000 seems to be the one, however, I do landscaping block (AB Block) and the caps are 3 7/8 thick. I am aware this is greater than the d36000 max depth cut but the depth is enough that a quick tap and clean up with the grinder will be fine. I would need the almost 4” cap block to pass under the saw. So Any comments would be appreciated.
@danallen1828
4 жыл бұрын
Longest rip for sliding tile saw! At the same price the Rubi dc 250 will rip Just shy of 4' You've also got montolit, imer,pearl heck even QEP and Harbor freight offer a bridge tile saw. Give some love to us bridge saw guys and try one out please! :)
@LandbergTileTV
4 жыл бұрын
I'll pit up a video soon on bridge saws 👊
@adamszczesniak91
3 жыл бұрын
Hi guys. What about the thick, big slabs? Like sandstone 35/24"? Won't be to heavy for the machine? I'm landscaper.
@sharky_spike
Жыл бұрын
adjusting the tile while the blade is running can destroy the perfectly str8 edge & allowing the large piece to pop up at the end can break the corner
@LandbergTileTV
Жыл бұрын
Not if you do it slowly and carefully. We do it all the time cutting large tiles
@nickmakris2971
4 жыл бұрын
Looks good. Would be nice to have put break on the blade, so you dont have listen to the plane land
@nathancuellar4403
4 жыл бұрын
That wet saw water has all kinds of different cut slag in it!!
@timthetoolmansampson3463
4 жыл бұрын
Still can’t get over the fact that for almost 1,200$ you don’t get a stand!!
@LandbergTileTV
4 жыл бұрын
It comes with a stand. It's all in one single box.
@tonygarcia9596
2 жыл бұрын
It looks good, and too It looked like it struggled a little and I could be wrong... mobility sucked in comparison with the older model. I wish Dewalt fixes that.
@lucasledlighting3509
2 жыл бұрын
Nice review , which model of table u use for D36000 ? , looks like D24001 , Just order saw D36000 and no idea with table be fit right ? If u can let me know be great , thanks bud
@LandbergTileTV
2 жыл бұрын
same stand for both saws
@NikitenkoAntonio
4 жыл бұрын
Hello! I want to order this model from America. I live in Israel and we have a 220 volt outlet. Is this model rated for 110v or 220v?
@maydanlex
Жыл бұрын
I don't understand how you got the tray to move so far?... I mean you went almost as far as the tail end of the blade. Help.
@maydanlex
Жыл бұрын
Actually I found the issue...The tray is warped just enough to stop the 'sled' from gliding past it.
@jfontesrj
3 жыл бұрын
I am going to buy a new table saw and I am wondering which one you would recommend me the best? Dewalt D36000 or the Dustless IQ tile saw? Please your answer is very important to me. I work mostly with residential, I was more into the Dustless IQ because I do second floors bathroom remodeling and I could set it up upstairs. That would be wonderful. I also already have the older dewalt wet saw. So what do you think???
@LandbergTileTV
3 жыл бұрын
I would go with Dewalt, been around forever!
@jfontesrj
3 жыл бұрын
@@LandbergTileTV I already have the dewalt 7 inches. What difference do see between then 7 to the 10? And in which scenario would you recommend the IQ tile saw?
@ahayee1885
4 жыл бұрын
Thanks for Another great video 👍
@LandbergTileTV
4 жыл бұрын
No problem 👍
@leoisaak
4 жыл бұрын
Thanks for the video 🌞
@rinatabe.1702
4 жыл бұрын
good? but $$$$
@leoisaak
4 жыл бұрын
@@rinatabe.1702 $1199.00 I think it is good.
@LandbergTileTV
4 жыл бұрын
You’re welcome 👊
@rinatabe.1702
4 жыл бұрын
@@leoisaak ok. Sorry, shipping is another $ 500 from the USA
@leoisaak
4 жыл бұрын
@@rinatabe.1702 I am sorry brother...
@anthonydemeo2050
4 жыл бұрын
Nice video... Do you know the MAX width of a tile that will clear the arm when cutting a miter facing up? I see the 12 W x 24 L cleared it no problem!
@LandbergTileTV
4 жыл бұрын
That's a great question, I'll have to check and add that to my upcoming Dewalt d36000 review video. 👊
@wallyjames2128
2 жыл бұрын
The max rip to the left of the blade is 18". We upgraded from the D24000 to the D36000 a few months ago and just love the bigger saw. Most of our work these days is with 2cm thick porcelain pavers to decks and patios. The accuracy and repeatability are impeccable. We love the huge rip clearance to the left. 24 x 24 pavers weigh 40 lbs and on the smaller DeWalt they get tippy when you're making a small rip cut. With the 18" left of blade and a more substantial support table to the right, the D36000 doesn't have this problem. Excellent saw and we are getting a lot of work out of it.
@douglasirving8417
3 жыл бұрын
Comparing the IQ tile saw to the DeWalt 36000 model what's the better saw ?
@LandbergTileTV
3 жыл бұрын
both have their places, both great saws. Do you currently have the D24000?
@douglasirving8417
3 жыл бұрын
@@LandbergTileTV yes it's 7 yrs old the 24000ans I'll be either buying the IQ saw or the DeWalt 36000 ...just not sure which one I should buy
@garyroxene
2 жыл бұрын
love the DeWalt saws..! they are definately the most innovative saws out there just like their table saws! HOWEVER!! you didnt cut straight through on the 24 x 48! Which is what I wanted to see.. you obviously turned it around. Why didnt you show THAT?
@smokymountain4222
Жыл бұрын
Only tradesmen would know that..🫵
@matthewsmith7746
4 жыл бұрын
What I wanna know is... Will that arm fit on the 24000? 😏 Man, that would be great
@LandbergTileTV
4 жыл бұрын
Wish it would!
@jasonshaw3796
4 жыл бұрын
Cant seem to find the foam board, where did you buy / what's the brand
@LandbergTileTV
4 жыл бұрын
You can find Go Board at your local Lowes store.
@darksahde
4 жыл бұрын
what about vs IQ?
@LandbergTileTV
4 жыл бұрын
2 different saws for to different applications, but yeah, comparison video will come 👊
@darksahde
4 жыл бұрын
@@LandbergTileTVhuh, what's so different about them other than one is water-based, and the other is waterless, please enlighten me in that future video.
@rj-qd7fh
2 жыл бұрын
This saw is coming to Australia would you buy an IQ or the Dewalt the IQ is nearly double the price $1699 DeWalt. $3050 for the IQ bare no accessories cheers Red
@LandbergTileTV
2 жыл бұрын
dewalt all the way
@rj-qd7fh
2 жыл бұрын
@@LandbergTileTV thank you
@tophatt5706
4 жыл бұрын
You didn't measure the accuracy of the 2'x4' porcelain rip 😜
@LandbergTileTV
4 жыл бұрын
lol, I forgot..
@darrenwatters3054
3 жыл бұрын
Same motor as 24000?
@LandbergTileTV
3 жыл бұрын
I think so
@hardie2311
4 жыл бұрын
fit into a height of 55 cm?
@michaelclark7602
2 жыл бұрын
Cut some quarry tile
@olsonlr
3 жыл бұрын
Love the patriotic flags on the bucket and headphones
@LandbergTileTV
3 жыл бұрын
yes sir, love my country!
@summittaedae2323
3 ай бұрын
beautiful saw. I just wish you lads would stop using medieval tape measures. Just use metric lads it’ll change your life’s 😂.
Пікірлер: 86