I've got my Leia hilt through Ultimate Works (via the Pach Store) and it fits the blade like your LGT hilt does, (only it has 3 set screws), but looks like the SaberForge hilt, but has a removable chassis (their Asteria Heart) and has the power button that's clear and 2 optional aux buttons 45 degrees off of the main button, that are hidden as as accent oblongs like what the Disney has near the main button. Overall, good solid review comparing these very different Leia hilts.
@jaimeekinman3701
3 ай бұрын
Actually for 20:43, that’s tip drag sound. The way that you can do the blade lockup sound is when you hold the button and hit the blade. That’s how you get it to do the lockup effect
@aaaaa1957
5 ай бұрын
The Disney saber looks like crap. It looks like cheap plastic. The sound is horrible, it rattles.
@rowdyrager-9403
10 ай бұрын
I have TXQ ans LGT movie inspired hilts. They arent bad for being a mass produced product from China. Its the inner chassis that really kinda suffer. Cheap plastics I think there are pros and cons to each but TXQ seems to have a bit better chassis.
@one.2622
6 ай бұрын
I know im late to the game, but i just found the Fx lightsaber at ross for 20 dollars!!
@Fanporium
6 ай бұрын
I just heard about that this morning! Sadly, nothing at my two local Ross stores. Happy hunting!
@one.2622
6 ай бұрын
@Fanporium hope you are able to find one. Mine only had 2, and my brother bought the second. This is an amazing video!
@Fanporium
6 ай бұрын
Thanks!
@JoeyHanharr
Жыл бұрын
Great comparison video! Thanks!
@tyliful
11 ай бұрын
nice thorough vid. great info.
@rowdyrager-9403
10 ай бұрын
Xeno3 XenoRGB can use the app makes it easier to chamge settings.
@Fanporium
10 ай бұрын
Yeah, that’s a great way around the no-flashing problem. Wish it existed when I got this one.
@order66collectibles
Жыл бұрын
Great video! Love the detail in the full comparison 😊
@Fanporium
Жыл бұрын
Thanks!
@rowdyrager-9403
10 ай бұрын
LGT simply cause it is slimmer. Dont like the cheapy epectronics have a custom installer redo it if they can.
@doug896
Жыл бұрын
This is the best side by side comparison review I've seen online (of any saber). Well done and thank you!
@Fanporium
Жыл бұрын
You are very kind. Thank you!
@doug896
Жыл бұрын
@@Fanporium you are welcome, just calling it like I see it. Now, how about a Rey Scavenger Saber comparison?! lol
@Fanporium
Жыл бұрын
@@doug896 It’s not a full comparison, but you do get to see the hilt, blade, and electronics for both Disney and the Hasbro on my review of the Rey Scavebger toy. m.kzitem.info/news/bejne/sqBjuWiCqGipeKg
@Mimi_34_
Жыл бұрын
It sucks it doesn’t have that belt hook built in the bottom of the grip like the movie. KR sabers did but unfortunately the tan out of that leia saber. I don’t get why they can’t make more😒
@Fanporium
Жыл бұрын
I'm not sure hat you mean. All four of these have the D-ring on the bottom that you can use to clip it to your belt. KR is a pretty small company, so any time/resources/capital they spend on one project is at the expense of another. I suspect they're more focused on rolling out new models. Their stuff is amazing!
@TK-yz3wt
Жыл бұрын
The nice thing about the Savi's and Legacy sabers is how easy the blade is to attach and remove. I have a P&D and the Cal/Jaro from the PC Collector's edition. The electronics aren't the best but it's fine for swinging around. The hilts are the heavier side. Saberforge is really the only other that attempted an easier to attach with the screw in pixel blades. I read in Reddit saber forum that the blades had a copper thread with the electronics built in. It would get hot then melt the polycarb blade which would snap off. Otherwise most blades use hex screws or thumb screws to hold them in place.
@Fanporium
Жыл бұрын
Definitely true! They're easily the most user-friendly to use. Just not the fanciest or prettiest. My Saberforge will be on its way to install in a few weeks, then I'll report back on how well that goes. They're known for mediocre installs and great hilts, so we'll see. And I'm working on a review of the Cal box set that should go up in the next few days. It's absolutely gorgeous and weighs a ton. About 25% heavier than a double Savi's.
@TK-yz3wt
Жыл бұрын
@@Fanporium The Saberforges I have are base lits so the pixel issues aren't an issue for me. The Cal/Jaro collector's hilt is heavier than the Savi's. I'm not sure how much heavier but the shrouds are adding to the weight.
@TagTab637
Жыл бұрын
Great vid and great format. Love seeing all the differences on the “same” saber!
@Fanporium
Жыл бұрын
Thanks!
@BiGFinK1960
Жыл бұрын
There are far more accurate versions of this saber out there. Elf is probably the maker who's currently the closest.
@icraigg
Жыл бұрын
22:57 open the config file and turn on button sound, it beeps where to would flash
@Fanporium
Жыл бұрын
Fantastic advice, thank you! I haven't dug into tinkering with the sound card yet, but this will be at the top of my list! Thanks!!
@Fanporium
Жыл бұрын
Do you have a link to the manual for this? I've been searching all morning and can't. find a reference to a button sound config.
@iCreggersPlay
Жыл бұрын
@@Fanporium in the config.ini file you are looking for this line it’s about half way down #SWITCH CONTROL SOUND, 0 MEANS OFF,1 MEANS ON. USEFUL FOR HILTS WITHOUT LED LIT SWITCH/BUTTON countdown=1
@Fanporium
Жыл бұрын
Yeah, the config on this one only has 4 settings. So I need to find what the next line is on that one, below the comment, in order to add it to mine. I might also need to upgrade the firmware. I tried moving the Leia font to first and defining it with a default blade color and effects. It takes the order and color, but ignores the blade effects settings. So I'm guessing it might be an older firmware.
Пікірлер: 32