Hi Justin, I'm Karel, and I too, learned something today, it wasn't easy to admit but admitting is the first step. Thank you
@JoshuaBardwell
3 жыл бұрын
My criteria for this roundup is a weight around 90 to 110g that can carry the Vista. That's why the Apex and the Roma F5 are left out. They are both a great frames but just a little heavier than I am looking for. That's also why I left out some of the Air Unit versions of these frames -- because I don't intend to carry an Air Unit. The GEPRC Mark 4 can have the arms mounted on the underside. It comes with longer standoffs that let you swap the arms underneath. Thanks to MiniMeFPV for pointing this out. I totally didn't realize that the extra standoffs were for this purpose. Since this was one of my criticisms of the frame, I wanted to be sure to point it out.
@EnzoM
3 жыл бұрын
the apex is only 5g heavier... dang (115g)
@crashflowfpv4841
3 жыл бұрын
Being my first and only five inch I don’t have anything to reference to, but my roma f5 is just amazing. If you considering it, you won’t be disappointed!
@skylark0534
3 жыл бұрын
I wondered why I saw the roma f5 in the intro and not in the vid.... Great job though! You also said the f5 was still in the list at the end... I'd love to see you build it xD
@fubarphill
3 жыл бұрын
I've just built one using the Roma F5, after building an Apex... guess I must like things a little chonkier...
@kataphrakt3505
3 жыл бұрын
how about the glide hammer? it's 130g or so, still less than a source one or bandolero or what have you, but is nigh invincible with 6mm arms and 3mm plates
@Bludz
3 жыл бұрын
BIG thanks for including my HaloRC Osiris in this round up, it's very cool to see my hard work featured on your channel and compared to more well known brands. It's especially awesome that a frame I designed 2 years ago can still hold its own against ones released just weeks ago, and nobody has been able to beat the weight. My frames take a lot of time to develop because I test them so much to make sure they are very durable, this is why I invented the 'spine' , sadly the main feature of the Osiris that didn't get mentioned. A tiny bit of wiggle in the arms after months of flying it compared to a brand new frame was a little unfair, the frame has no wiggle when new, but carbon does ware out and metal bends. I'm so pleased to be considered amongst the other great frame designs (not that CL1 thing, lol), and it is clear that you honestly like my frame and enjoy flying it, so for me it is job done. Please don't take the 2 points I made above as complaining, far from it, just had to say something for those who actually read the comments :) Laters
@Rich-TeaFPV
3 жыл бұрын
Mate you make great frames, I love my GuitarPick builds. 👍👍👍👍
@Bludz
3 жыл бұрын
@@Rich-TeaFPV Thanks dude :)
@Eric_Kieckebusch
3 жыл бұрын
Bludz for president! 😁😁 Just building the "Rah", not finished yet - still waiting for parts, but that's some ingenious design! Probably the beginning of a long-term relationship :)
@sifpv5778
3 жыл бұрын
Love my Osiris, UK/EU peeps who don’t want to buy from the other side of the world take note of this frame designer! Great customer support too ;-)
@Bludz
3 жыл бұрын
@@Eric_Kieckebusch Hahahahah, thanks man. I wondered how you were getting on with your builds, glad to hear it.
@overdosed51
3 жыл бұрын
The moongoat is nice but $100+ for a frame is ridiculous. Thats just IMO
@noforyoutubepremium3108
3 жыл бұрын
agreed!
@TheDroneNerd
3 жыл бұрын
Yea they’re definitely taxing the crap out that frame. I still prefer the fpvcycle glide anyway.
@AA-gl1dr
3 жыл бұрын
even the apex isn’t that expensive.
@alwayshathbeen3340
3 жыл бұрын
Of these options, I think I’d go with the FPV Cycle Glide.
@SugarGreg
3 жыл бұрын
cant go wrong with that one, flies super nice
@yannickg6904
3 жыл бұрын
If I remember correctly, my Flosstyle frame is around 87 grams. Bob has been refining the recipe for a while now, lol.
@PadiwanFPV
3 жыл бұрын
Props out of view is also something to consider especially for hd setups. I went with the mark 4 for that reason... Moongoat looks like the best but at double the price.
@Politicallyhomeless957
3 жыл бұрын
This is the kind of content that only JB delivers. NO ONE has helped more humans fly FPV than this man right here. Tip of the cap 🧢 my friend
@cpfpv6410
3 жыл бұрын
Joshua Bardwell: "But I am going to leave you hanging" Me: "....you're not a nice person an didn't learn something today". lol.
@nadieselgirl
3 жыл бұрын
If you have problems with slot mounts, just install and tighten down the stack where you want it. Then just put a little hot glue to clog the slot and it extra stays put at least for me. Plus it comes out easy if you want to move the stack around again.
@notsure1502
3 жыл бұрын
"Relief Cuts"... You mean Science Holes?
@PortalFPV
3 жыл бұрын
no no....speed holes. It'll make it faster ;D
@kyakfsh
3 жыл бұрын
It's been 2 months. Will we get to find out your preferred frame soon?
@Stankycreekbmx
3 жыл бұрын
Public announcement on the QAV-S - The split top plate does allow for some vibrations to make it through to your HD Cam. Other than that it's a very good frame. I've broken an arm too. Pick up some extras. Lumenier released the JohnnyFPV version of this frame with a solid top plate and aluminum camera side plates. You can switch out those pieces to get rid of the vibrations. Peace!!
@michaelc5027
3 жыл бұрын
I asked for the QAV-S for my birthday, so there is a chance that I might get the frame. What you say actually makes sense. It's a design decision based on convenience but it's a little odd nonetheless. Might have to look into the top plate off the Johhny version, thanks for the suggestion.
@Skavage
3 жыл бұрын
Man that was like watching a thriller movie and at the end you get a "To Be Continued" and you have to wait a year for the conclusion. JB you should be ashamed! :)
@Quadflightuk
3 жыл бұрын
Source One V4 does fit an air unit. There’s an optional stand-off configuration for doing so
@sigterm15
2 жыл бұрын
source one v4 does fir air unit. i fly with it. no need to modify standoffs
@Kajedkid
3 жыл бұрын
Most definitely the moongoat. Very refined really light and durable. No brainer....
@tb6638
3 жыл бұрын
Ive been flying the QAV-S for like a month or so now. It is my lightest build and I have no issues with vibrations or noise. I lost the small triangleish interlocking piece in a crash which kinda sucked because my arms were not broken but I was unable to fly because theyd move. I just bought a few extra and I am good now.
@TheDroneNerd
3 жыл бұрын
Thanks for your comment, that’s a big design downfall imo...We already have plenty of things to worry about when crashing..Now add to that an extra weak tiny interlocking piece to the equation. 🤦♂️
@jeffjorczak
3 жыл бұрын
@@TheDroneNerd can that just be permaglued to the baseplate?
@TheDroneNerd
3 жыл бұрын
@@jeffjorczak Sure I don’t see why not. My concern would be, will glueing that piece compromise the frames rigidity and or strength ? It’s such an integral part of the frame that it can possibly even affect flight characteristics I would think.
@BubbyFPV
3 жыл бұрын
The Woodchuck FPV Wasp is another realllyy good option for a lighter frame.
@StacemanFPV
3 жыл бұрын
What's the weight on it?
@JonasCE
3 жыл бұрын
I use hyperlite flosstyle 5" for years now and I'm very happy with it. It is only 83g heavy which makes it awesome freestyle frame. My build is overall with Session 5 on 597grams! It flies like a charm! *for LR quad I use also hyperlite flosstyle with 6" or 7" arms :) (that means I can print all the 3D prints whistless & bells once, because they are interchangeable)
@MrJasonodonnell
3 жыл бұрын
I have a V4 Source one, I really Do like the way it flys and it has helped me to drop almost 40g off my build this week which is a good start. (AUW is now 684g) I personally wont see myself breaking it or any other 100g frame so I have no issues with this route of design. Mine did not come packaged with spare arms, and the standoffs as you say are way to high. An Apex go pro mounts fits fine, there are files for skids/sma mount etc, only issue I had was mounting a micro sized camera an issue Im still working on, but overall im Quite happy with it. Prior frame was an Iflight cidora.
@pippifpv
3 жыл бұрын
The mark4 has held up really great for me. I have crashed it a lot, and I can't remember breaking any carbon yet. I have exchanged the motors once. Speaks to the reliability of the mark4. Edit, build it with a quality 20x20 stack and it is well protecting and making fitting easier.
@cafub2650
3 жыл бұрын
Moon goat 🐐 I'm sure. He spent like 10 mins going on about it.
@schnurrfpv4594
3 жыл бұрын
I have two of these and they are so good
@PortalFPV
3 жыл бұрын
maybe, but I'm thinking the Glide cuz Ciotti is his buddy and that's what he flies
@cafub2650
3 жыл бұрын
@@PortalFPV Yah so is Cricket. One of each lol.
@Paul-Waldin
3 жыл бұрын
It hast to be! Truly brilliant frame :) and Erodyofpv flies it!!
@paulgeorge1069
3 жыл бұрын
The geprc mark 4 is extremely durable with excellent motor protection, but the plate your talking about is not olny in the way they brake. Not too hard to just cut some out of old broken frame parts. This frame looks super long but is easy too fly. I have a 6" though and it has really helped my flying. I used to just tell people I'm going to go crash my quad. Lol now I can truley say I'm going flying. Something about the hoover video just clicked. I can finally los hoover and flip. I didn't learn anything I didn't know already, but maybe knowing others have taken a long time to achieve control. Thanks for all you do!!! Keep up the GREAT WORK without you I don't think I would have gotten here. YOUR AWESOME!!!
@nedapaz
3 жыл бұрын
The source one v4 is compatible with a full size DJI air unit! You just have to screw the standoffs closer to the FC stack. Just pointing that out!
@minimefpv
3 жыл бұрын
@Joshua Bardwell Very nice review. I have 2x GepRc Mark 4 HD frames with 6" arms. Great frame design, great durability i like it very much. You forgot to mention that in the frame packaging u got 4 extra longer standofs to use in the middle of the frame if u want to mount the arms underneath the bottom plate so u can get extra room :D I just wanted to mention it because noeone who did the review of this frame noticed it ;) :D
@smakersify
3 жыл бұрын
oh wow, I learned something today.
@Lucianrider
3 жыл бұрын
So that's what they are for!! LOL I'm retiring my 5" frame as the arms are now loose like a whores twat.... Poor arm design that makes this a frame that I would not recommend.
@TinkerLifeProjects
3 жыл бұрын
Missed the best part about the Osiris, the spine. It acts to massively stiffen the frame and reduces the reliance on good tolerancing. Personally I have had no issues with the arms shifting and the frame is as stiff as any other in my collection. Big fan
@SKIDOOSH
3 жыл бұрын
Diatone sent me the DJI Roma F5 kit...frame snapped in 3 places around the GoPro mount on the first crash. Vid on my channel...
@grepboy
3 жыл бұрын
A few of us have all reported durability issues with the Roma F5.
@aquilinefpv2592
3 жыл бұрын
I have only broken the arms. ill watch tho
@AddictedQuadroner
3 жыл бұрын
@@aquilinefpv2592 - This guy was having his first flight and only after couple of seconds, not even a hard crash, top of the tree with the thinnest possible branches: kzitem.info/news/bejne/k5qouKxqnHdoqmU . Crash happens around 6 minutes and 19 seconds into the video (if the link provided does not start it at that time).
@aquilinefpv2592
3 жыл бұрын
@@AddictedQuadroner kzitem.info/news/bejne/l4CYx6Z-apZ5hYI I have been flying with the Roma 6s with a 1300mah ovonic battery and have broken three arms. I just had a similar crash and hit the top of a pine tree it fell 30ft no harm. I think he hit the front end in a funny way that would break almost any frame in this weight category.
@AddictedQuadroner
3 жыл бұрын
@@aquilinefpv2592 - that is amazing flying my friend. I am trying to decide what to buy as my first 5", Nazgul5 HD or Roma F5 HD. All those broken frames scare me a little bit to be honest.
@tango_sierra8608
3 жыл бұрын
Been waiting awhile for this one mr.bardwell. Thank you for finally releasing this video. Huge help brotha
@diabolicallydan
3 жыл бұрын
Those QAVs arm ends have cut outs that look like hexes... could a spare arm be used as a prop wrench for your prop nuts???
@oneperspective8601
3 жыл бұрын
Oh holy shit true
@TheDroneNerd
3 жыл бұрын
Super innovative! Let’s do without a tiny prop tool and lug around an extra arm around instead. 😂
@djdjm600
3 жыл бұрын
I can propose to you the best freestyle frame for review, VEGA GRAVITY 5", 97g, T700 Toray, full chanfered, painted, aluminium color customisable, 3D print customisable in color, GoPro models, ND filters models, luxury accessories, strong and beautifull 😉
@damianklaassen8760
3 жыл бұрын
Got a GEP RC MARK4 HD5” and fly’s amazing en durability is quite good but the pieces in between the fore arms and also the back arms tend to break first, and have 3D printed motor protector and and cost about 7 gram total so overall the best beginner quad for me, and will buy a second one
@flowstate_link
3 жыл бұрын
I would not say the Mark 4 is a hardcore freestyle quad but it is good in many ways!!
@baggszilla
3 жыл бұрын
Pick the QAV-S! As soon as I saw the frame when it came out a few months ago I said yes this is the frame style I'm looking for!
@flowstate_link
3 жыл бұрын
I have been flying the Mark 4 for about a 6 months it is a great frame. Have multiple builds with the frame. It is durable but I have managed to break the bottom plate (it is not broken all the way) just one section so the cut outs are interesting in this regard the will make a crack more likely. But snapping entirely is probably not likely unless you hit it just right into concrete. Snapping an arm happens but it is very easy to change the arms. This is a nice part of the Mark4 Your point about the arms being inside is right on it really reduces the space. But it is a fairly long 5->7” frame so it is not a massive issue. Thanks for the round up JB. True blue brother.
@MochaboyRC
3 жыл бұрын
"It's $26, so shut up..../laff" Good one :D
@CoolStuff1
3 жыл бұрын
Hi can somebody give me some advice PLEASE... My Moblite 7 is acting funny. I have Moto Stop on but when I arm Motos still spin and also throttle response is sort of delayed making it unflyable. I also noticed that in Betafight I tryed to set up switches for mod but even though I put it in auto it doesn't respond.... I would be greatful for any suggestion as I am new all this THANK YOU...
@thetrolle
3 жыл бұрын
The Halo Osiris is a sub-90gram frame with aluminium screws. Flies great and comes with excellent customer support.
@PhantomFPV
3 жыл бұрын
Dope review JB!!! Keep’em coming brotha!
@TheZolon
3 жыл бұрын
As someone who breaks quads just by looking at them, I will let you know in a bit about the QAV-S. I am almost done buliding mine.
@blitzkiek
3 жыл бұрын
well?
@brandonbradford6317
3 жыл бұрын
A better design for the Lumineer QAV-S would be to shorten the stand-offs for the 3 that are lined up and create a passthrough standoff that links the three standoffs that screws can go through and into the standoffs under the linking brace. This way you get the ability to take the central screw off and access the back without removing the front, but connected standoffs create a unified connection that would strengthen the frame overall and prevent it from bending as JB showed. It may add a few grams of weight though.
@NOIZYB
3 жыл бұрын
glide 5 my favorite
@evanoliver68
3 жыл бұрын
Really looking forward to the build video!
@markiemark7018
3 жыл бұрын
The glide is such a good frame 👍🏻🔥👍🏻
@nicholasevans9465
3 жыл бұрын
I'll look forward to the build video! Thinking about starting a 5" Freestyle build.
@wootsman
3 жыл бұрын
I really like my moongoat. I have a 20x20 and havn't had issues with stack screws you mentioned. I vote moongoat!
@boogiefpv1982
3 жыл бұрын
I actually like the FPV CYCLE ⚒️ HAMMER!! But I really love the moon 🌛 goat 🐐 is bad ass, period & Corey beatsc his shit up
@SuperGamer133
3 жыл бұрын
I have a geprc mark 4 and im still a new pilot and been through 2 cheaper frames off Amazon but I still haven't broken the geprc frame and it has room for everything and easy to install my components
@helixinwonderland8938
3 жыл бұрын
Dingo 5 by Sabotage RC at 95g. Not that much space for electronics but with individual ESCs on the arms, I was able to put a Vista in there. Good price and free shiping.
@L00n3y2010
3 жыл бұрын
I have the tbs source one v3. I really like it
@noisy_boi_fpv_3920
3 жыл бұрын
But the tbs source one arms are a tank tbs source tank j. Stock format cam side plates act as a gusset very tuff best budget freestyler
@shaneanderson6034
3 жыл бұрын
V3 is a tank for show. Had one for a while now no issues. I purchased the v4 and after a few batteries broke an arm with crash on grass. No stockists in Aus sell spare arms and my v4 didn't come with the spare set JB got with his... hmmm
@noisy_boi_fpv_3920
3 жыл бұрын
@@shaneanderson6034 dude that sucks and all for a couple of grams mine os coming in at 700grm with session and vista jib done flies great wrapped in tpu bullet proof. I some times think bardwell has lost the plot cos out of that lot 100% source one
@noisy_boi_fpv_3920
3 жыл бұрын
Not to mention he starts off saying about side camera plates adding strength and then calls them silly he is waiting now to see who is gonna pay him the most to say whos frame. Its about at end the of the line now for me mr fpv know it all has shown his colours one time to many now he is pissing on our backs and telling us its raining !!!!
@mr2inertia
3 жыл бұрын
I LOVE the QAV-S 5 and it works surprisingly well with both the DJI air unit and Vista so it definitely works with any analog setup you wanna go with. ;)
@FreelojoFPV
3 жыл бұрын
Fpvcycle glide light is the light weight frame for me.
@ugpfpv361
3 жыл бұрын
Flying the FpvCycle Glide since it came out, you can also get a "heavy" 6mm arm version, or a 4mm "light" version, not to mention the option to get "dead cat" style arms.. but the moongoat looks very interesting!
@maceliusfpv370
3 жыл бұрын
My first and favorite 5", haven't broke it yet and it's seen a few trees and the side of my house at full bore lol.
@coooxd
3 жыл бұрын
Lumenier QAV-S looks so slick but this split top plate design, just why?
@JoshuaBardwell
3 жыл бұрын
I feel the same way. I think the designer wanted to be able to quickly change HD cam so being able to swap that plate with 2 screws without changing the entire top plate was a goal.
@masonstorm4686
3 жыл бұрын
The moongoat is what I fly
@creaturefpv
3 жыл бұрын
I have alot of respect for you giys keeping it all family friendly. Not that I care to much about me but it says alot about the team all together and your thinking of your followers. Thx for all the videos. Im sure you have heard this before but I would not have been able to get into the hobby if it weren't for you and the guys from the team. Your awesome and keep up the good work. !!!
@sketchpv3080
3 жыл бұрын
The Moongoat is so hot right now! I see more new builds with it than anything else. And for good reason!
@snakefich
3 жыл бұрын
I got a Glide auw 570g with session 5, fly's fantastic.
@hapsti
3 жыл бұрын
what battery?
@snakefich
3 жыл бұрын
@@hapsti Tattu R Line 6s 1050 95c 170g, 20x20 Ikon 35amp 4 in 1 esc, 20x20 Radix LI Fc, Emax Eco 2306 6s 1700Kv 31g with wire, TBS Unify Pro 32 Hv, TBS Triumph Pro antenna, Foxeer Cat 2, No TPU Parts, Love the light weight, Happy Flying
@jtdread
3 жыл бұрын
Great video! I've been torn between choosing the moongoat or qav-s for my next build so this was right on time! I noticed you put "No" for the air unit for the QAV S... When I asked GetFPV if the air unit would fit in that frame using something like the 20x20 TPU mount that Xilo makes they said it would.
@lucaschapman1966
2 жыл бұрын
I laughed hard when he awkwardly picked up all the drone frames…. All of them!
@rcrc2340
3 жыл бұрын
I did a belly flop on grass with my geprc mark 4 frame and it split on the base plate around one of the FC screw holes. This caused electronics to shift around and short which meant replacing the FC and an Air unit... I still fly and enjoy the frame but I've started using 2 stacked base plates to reduce the chance of something similar happening again. All the stock screws are long enough to pass through an extra base plate so it's easy enough to double up.
@kaptkrunchfpv
Жыл бұрын
If you heat up the top plate a little with a heat gun that battery pad will stick like crazy!
@MCsCreations
3 жыл бұрын
Fantastic roundup, Joshua! 😃 Personally, I'm still in love with the FlyWoo Mr.Croc! 😂 Anyway, looking forward to the build video! Stay safe there with your family! 🖖😊
@sunol1212
3 жыл бұрын
The Glide is the correct choice. 😁
@mrbigb12
3 жыл бұрын
what frame did he end up going with ? cant find the video...
@vhfgamer
3 жыл бұрын
No Zoefpv Unicorn? It would have been perfect for this lineup.
@JoshuaBardwell
3 жыл бұрын
It's not widely available and in fact I'm not even sure Zoe is still producing it.
@thenakedcableguy
3 жыл бұрын
Love my qav-s so far. Haven't had an issue with the split deck design yet. I would like better camera mounting solution but has a ton of mounting options
@JoshuaBardwell
3 жыл бұрын
How would you improve the camera?
@thenakedcableguy
3 жыл бұрын
@@JoshuaBardwell rip-off the moongoat slightly. Angle the plates out at the back to make the camera plate butt up against the arms while also lining up with the top plate stand-off's. This would be maybe an extra 1-1.5mm of material and the design would need to be modified minimally to achieve this while getting a stronger overall camera mount while not adding some sort of awkward guard or bumper. Edit: it is great the way it is. It's just personal preference because I'm very hard on frames.
@Selph_EU
3 жыл бұрын
Maybe check the JohnnyFPV's version, the camera mounting is different and it seem's there's no split deck.
@thenakedcableguy
3 жыл бұрын
@@Selph_EU I took a look at it just now. It looks nuts, the camera mount is insane. The rest is strictly my opinion. They have changed so much of the things I like about the normal frame that its not the same. The GoPro vibration feature eliminates the split top deck. I didn't check size but the carbon is a little thicker by the looks of it. The other part I'm not fond of is the camera couch. I know it's Johnny FPV and it works for him but even mr.bardwell has pointed out in a video that it's a trend that needs to die. Edit: grammer
@gmivisualsjason3729
3 жыл бұрын
Enjoyed that as always Joshua.... very informative. Theirs no substitute for real world experience with many frames
@grahammiller6600
3 жыл бұрын
You can fit an air unit in the glide frame using the 20x20 mounting holes in the back and it fits quiet well. You just need to buy the longer air unit camera cable if your air unit came with the shorter cable by default.
@neonoir__
3 жыл бұрын
Stack screws that go through the arms as the main structural support is definitely a dealbreaker, they should probably change that in the next iteration of the source one. Over time the arms are gonna start to wiggle a bit and when you try to tighten them you have to fuck around with either standoffs or nuts on the stack which is very annoying.
@schnurrfpv4594
3 жыл бұрын
JB you need your own frame. Its time. Call it the (3 a day)
@juanfelipecaro
3 жыл бұрын
30:32 Diatone F5? Did I miss something?
@Arthur4all
3 жыл бұрын
So basically a MoonGoat vs Glide. And I`m going to bet on the MoonGoat Why have you mentioned Diatone F5 if it`s not even in the video!
@djdubz
2 жыл бұрын
Great vid. One thing that might be helpful for some pilots trying to find the best frame for them is discussing if it's a true x, squished x, or stretched x frame as pilots have their preference.
@Gw0wvl
3 жыл бұрын
I've not long built a quad using a second hand GEP RC frame I got of eBay , It's a really great frame , Strong, Lite weight, And great looking .
@AlexDaviesXD
3 жыл бұрын
Apart from the stack screws on the source one V4 going through the arms also, the weight saved compared to the V3 makes the frame a lot better for me personally. Especially since progressing in my skill making the durability of the massive arms not as much of a necessity. I did have to cut the battery pad to fit the 3D print but there's so much room for a battery.
@smoke4131
3 жыл бұрын
Mark 4 gang 😎
@maxbourdages3421
3 жыл бұрын
Rippin cl1 and hd1 for like a years alway top or bottom broke. So good frame for the price really cheap but harder to repair
@dimanfpv3247
3 жыл бұрын
I've got a moongoat build coming along nicely.😉
@TheDroneNerd
3 жыл бұрын
None of these frames can top the Fpvcycle Glide. It’s just the perfect frame! Highly durable, super light, brilliant arm design, and also one of the cheapest. Not to mention the thing flies on rails!!!
@timechaser4313
3 жыл бұрын
Love both of my Mark 4’s. And sense they both started with Tarsier’s in them, there is also 20mm mounting holes in the front. But when I rebuilt them, the arms inside the body was a major pain!! Have had my eye on the FPVCycle Glide, or the Moon goat. Awesome video, as always!
@dbcooperfpv9883
3 жыл бұрын
The CL1 has been my beater for awhile and I like it a lot - flies awesome and very serviceable. I have a Vanny version in the box waiting to use my last of me original spare arms, then I'll be converting. I also have 2 moon goats under construction - from a build standpoint, I like them, and as Cricket has shown, it should fly awesome and take a pounding.
@coolchop
3 жыл бұрын
I've heared, that the mark 4 has problems with vibrations/noise. Can someone confirm that? Or isn't this the truth?
@MateuszPolkowski
3 жыл бұрын
Two of my quads are GEPRC MARK4 HD5 and I love them.
@forrestfaszer595
3 жыл бұрын
I flew my ti frame without my hero 9 on it for the first time in a while yesterday. Wow I forgot how important it is to be light. It was awesome, I felt like I was a 4x better pilot
@DronemanfromNepal
3 жыл бұрын
i fly geprc mark 4 clone frame , im good with them
@kwadkrazy6078
3 жыл бұрын
I fly the original...or the supposed original...got it off amazon for 30 bucks, hasn't failed me yet :D
@stayliftedgermany4041
3 жыл бұрын
You could drill holes in the frame Front to mount something
@stayliftedgermany4041
3 жыл бұрын
On the cl1 Vanover
@aiRxShop
2 жыл бұрын
I’m still using my first TBS Source One v1 frame. lol. Haven’t even broken an arm. (Granted I only fly trees/parks, & don’t fly bandos) I had cnc madness cut me a few frames and I haven’t had to replace anything on the first frame I used. el oh el.
@DadsRCHangar
3 жыл бұрын
Really enjoyed that, thanks for that JB 👍🏻
@DavidTaghehchian
3 жыл бұрын
Nice to see that arms are starting to be designed correctly (rotor riot frame). Ideally the arms would have a square crossection for maximum strength to weight/drag ratio in all directions. X mm in height adds significantly more strength than Xmm in width for a given direction of force. In the stress calculation, it is obvious in the Moment of Intertia term.
@kevinreichel2277
3 жыл бұрын
I had a problem with the Moongoat elongated holes. Hit a branch stack slid and shorted against frame. Fell as a fireball from the sky.
@sylvanlight120
3 жыл бұрын
Looks like it's just the little tabs or flanges on the QAVs arms that stop them from swiveling on the 1 screw! If that is the case, I would think those arm locking flanges will snap.
@SilverbackSasquatch19xx
2 жыл бұрын
I came to the right video as always with Joshua Bardwell, have a diatone basic mini mk3 I was wondering what I’d put it in and I have a cnc with spare carbon fiber, source 1 for sure after this video thank you!
@ranudar5666
3 жыл бұрын
I'm betting on the Moongoat. It's just the most interesting of them all.
@FPVish
3 жыл бұрын
so which one did you decide to go with ? I missed it somehow
@aceoptixx
2 жыл бұрын
a 2023 update would be nice
@pacificnorthwestpilots6050
3 жыл бұрын
JB, any word on the QAV-S Frame? Maybe they can cut a compatible single top plate for people that have the split top frame? I really want to get this frame, but am cautious of the flexibility from the split top plate.
@marcoguada42
3 жыл бұрын
These stop screen with infos are great👌
@traviscook5144
3 жыл бұрын
This took so long for you to make but it’s so worth the wait!
@theonewhowas7709
2 жыл бұрын
im really liking the GEPRC Mark 4 frame.. i think its gonna be the one i get.. i had a ghost 2 but i never put it together.. so.. i think ima get the mark 4
@neilfpv
3 жыл бұрын
I like 650-750g because of the momentum when I do a trick and the floatiness too!
@svenniefpv
3 жыл бұрын
Love the strix screech... 97gr and more than durable for me. And can carry à vista in the back
Пікірлер: 390