Kudos to you for not giving up! I also agree it is valuable to show your progress through solving the problem. It led to the comment about the diesel heater tubing. No telling how many people you've helped! Kir (and Ron)
@GimpyCamper
2 жыл бұрын
Thanks
@chadrobinson3504
2 жыл бұрын
Thanks for sharing the whole thought process. Too many videos go straight to the magic solution. It was great seeing you work through the options and what might work or not.
@GimpyCamper
2 жыл бұрын
I’ve learned it’s more sincere to show the mistakes too
@AvengerRVAdventure
2 жыл бұрын
Looks like a good resolution for relocating the exhaust! Thanks for sharing the details! Steve
@GimpyCamper
2 жыл бұрын
This one has given me issues for 2 years but I finally found a great and easy fix
@itsabouttimenowdiana680
2 жыл бұрын
Gotta love ingenuity…great job… as you know we were impressed when we saw it in Mayberry ~Brad and Diana
@TomandLoriRVLife
2 жыл бұрын
Cheapest, easiest...two of my favorite words! 😁 great idea!!!
@GimpyCamper
2 жыл бұрын
There ain’t much that’s cheap anymore lol
@Relax-288
5 ай бұрын
Yes
@patcic1
Жыл бұрын
Thank you so much for help, this is a great video and perfect solution to venting the generator exhaust!
@GimpyCamper
Жыл бұрын
It’s definitely the best thing I’ve found and lasted the longest without issues so far. Still be mindful of carbon monoxide as I don’t think this removes all risks but I wanted to be as careful as I could.
@pappydc12
4 ай бұрын
Thanks - gonna try this. Run my 3500 in the truck bed near the tailgate when camping. I need a way to get the exhaust out of the bed, especially when raining. I'll kind of tuck the genny back under the tonneau cover but the exhaust just heats up the bed. This could work to route the exhaust out and away. Looks like it would be easy to hook up/disconnect when not needed. Predator 3500 has been a great for my use. Like the way you have it set up on your rig. We have a Keystone Passport 23RB. A little smaller but cozy for me and the missus! Subbed!
@thatoneguy_429
Жыл бұрын
Awesome! Thanks. I’m about to build my setup and I’ll make a video showing what I did
@Noelshepherd
Ай бұрын
Thanks. That was a big help.
@martincara1931
Жыл бұрын
I use silicon house for many years and they work great
@RedJaguar100Travels
2 жыл бұрын
As I always say, Where there's a will, there's a way... Good job...
@GimpyCamper
2 жыл бұрын
Thanks
@RedJaguar100Travels
2 жыл бұрын
@@GimpyCamper You Welcome!!!
@davidbyrne9093
2 жыл бұрын
Great tip ... looks like a great solution .... thank you
@homesteadingwithsadie
2 жыл бұрын
awesome job , gotta love amazon ,
@jonplay3602
Ай бұрын
Do you have an update as to did that solution eventually last?
@GimpyCamper
Ай бұрын
Yes it’s great. Never had to even tighten it. Still voted best solution
@Detail.Excellence
Жыл бұрын
Thanks for the video! As for the exhaust clamp, is that necessary? Can i just use the other hose clamps that you just tighten with the screen?
@GimpyCamper
Жыл бұрын
The metal on the exhaust is pretty thin and that’s probably possible but I didn’t have luck with my original flex pipe working that way but it was a lot thicker and more rigid
@wardg.5559
2 жыл бұрын
Do you have an update?
@GimpyCamper
2 жыл бұрын
I’ve used this about 100 hours and it’s held up much better than my previous versions of exhaust. Hasn’t came loose a single time
Just found your video. I have an 8750 Inverter Generator. I am looking to fix this inside my garage and was looking for a solution. I understand the problems a rigid exhaust would have on the muffler. I was considering high temp silicone tubing. How is your system, 4 months later?
@GimpyCamper
2 жыл бұрын
I’ve used this a lot in the last couple months with zero issues.
@firstcoastfoamparty5031
Жыл бұрын
hey MrRchitty, did you do this with the 8750? I have an 8750 so any tips are appreciated!
@MrRChitty
Жыл бұрын
@@firstcoastfoamparty5031 Not yet. Still pondering the idea.
@Candy_Mountain
2 ай бұрын
What size of hosing did you get?
@GimpyCamper
2 ай бұрын
The links were in the description 2.5CM/1in Inner Stainless Steel... www.amazon.com/dp/B094NC59P8?ref=ppx_pop_mob_ap_share
@Candy_Mountain
2 ай бұрын
@@GimpyCamper Thanks, it gives the link… but not the size, there’s several on that link. I highly appreciate it! I’m curious if this modification helped your Predator run better? My exhaust is so bad I have to clean my spark arrestor constantly
@GimpyCamper
2 ай бұрын
@@Candy_Mountain I can’t tell a difference in how it runs but I’ve not had the spark arrestor for a long time
@paulshull9247
14 күн бұрын
@@Candy_MountainNot saying that your machine is needing tuned, but if your exhaust is carboning, you might run some Seafoam fuel system cleaner thru it. Any parts store should have it. Running it thru system every 3-6 months helps keep the fuel injection right. You may only need to clean the sponge air filter with some gasoline and replace spark plug. The Trinity in 4 stroke combustion engine is " Good Air, Fuel & Spark ". Hope this helps you. 👍
@Candy_Mountain
14 күн бұрын
@@paulshull9247 Ty!!
@adamluckey
2 жыл бұрын
Does it need any sealant ?
@GimpyCamper
2 жыл бұрын
I would not trust it 100% for carbon monoxide as some people say that if you completely plug the exhaust it still runs, but I run it outside with a fan. I do not have sealant but a little red rtv silicone wouldn’t be a bad idea, but it’s a pretty tight fit to start with
@pyrojoe1404
7 ай бұрын
What model is that cougar?
@GimpyCamper
7 ай бұрын
2019 29 rks
@pyrojoe1404
7 ай бұрын
@@GimpyCamper nice
@bernardpoole9123
Жыл бұрын
It is stainless steel should last a long time
@GimpyCamper
Жыл бұрын
It’s holding up good so far, but it is pretty thin…. Best option I’ve found yet though
Пікірлер: 47