Honestly bro aside from all these street and show builds. This is the best fitment I’ve ever seen and the Only fitment that works for me. I told myself I want that boxy tuck that Porsches have and this is exactly what I imagined
@SpeedCultureStudios
6 ай бұрын
It IS the best fitment 😂 not into the stancy boy look. Flush and practical is it!
@icloudzawy1861
6 ай бұрын
@@SpeedCultureStudios couldn’t have said it better 😂😂🙏
@icloudzawy1861
6 ай бұрын
@@SpeedCultureStudioshow’d you figure out the best tire fitment? I really want to run those nismo v2 wheels but I don’t think those stock wheels can have the same wheel fitment
@SpeedCultureStudios
6 ай бұрын
@@icloudzawy1861 i got an idea of where different wheel specs would get me and made the adjustments. Finding a wheel with the correct offset and width is key
@icloudzawy1861
6 ай бұрын
@@SpeedCultureStudiosyou ran tein springs ?
@natephillips6890
Жыл бұрын
Just recently got my Q lowered on Tein coilovers and was doing a bunch of research for wheels and tires next this was the perfect video it answered all my questions much appreciated 🙌🏽
@SpeedCultureStudios
Жыл бұрын
Great!
@andrewmatadeen8448
Жыл бұрын
Did you install front arms snd rear after installation
@natephillips6890
Жыл бұрын
@@andrewmatadeen8448 nah just coilovers didn’t even get an alignment probably should do it eventually lol
@marcdesty823
Жыл бұрын
How do the coilovers ride? Are the smooth ?
@natephillips6890
Жыл бұрын
@@marcdesty823 yea the ride quality isn’t bad at all
@Juan.Q50S
8 ай бұрын
Currently on rsr super down springs with rear camber and toe arms and front z1 forged camber arms have nismo v1 19x10.5 +23 squared I know I have seen people run 255/35 all around but would a bigger tire fit in the back without pulling? Like 265/35 or 265/40 tryna fit a bit more tire in rear
@s2k442
6 күн бұрын
So I have anovia elder wheels 10 inch wide 40 offset with stock ride height was thinking 275 x 35 all around. Sounds like they will fit rear fine but will I need a slight fender roll on the fronts or just switch to 255 front? Using the "willtheyfit" site these wheels are close in fitment to your setup. Thanks
@chrismartinez-qe8wj
15 күн бұрын
Could I fit 245/45 r18 on the stock q50 rwd luxe 2018
@SpeedCultureStudios
13 күн бұрын
Yes
@RjQ50
7 ай бұрын
Im going with 19x10 +20 With 255/35/40 tires 🤔
@aficionadohiend
7 ай бұрын
Hi, I just got the same wheels along with 255/40 R19 Continental Sportcontact 7 tires (square setup). They look a little bit stretched on 9.5, and it is visually more noticable on the rear side than in front, maybe I should have gone staggered just like you did. One question: ¿What is the right tire pressure for this setup (psi)?
@SpeedCultureStudios
7 ай бұрын
I typically run 29psi rear and 32psi front. It was my preference based on the type of driving I used the car for. Tire pressure is something you can play with a bit.
@kaynegarcia7172
Ай бұрын
Do you think 19x9.5 +22 will fit on my 2020 Q50 luxe without having to use spacers?
@SpeedCultureStudios
Ай бұрын
That’s already an aggressive setup why would you think you need spacers? The closer the offset is to 0 the further out it pushes the wheel. If you’re trying to clear big brakes that will come down to design of the wheel. Not every wheel is the same so it makes that a bit more difficult to determine
@jakefox3677
Жыл бұрын
I had an issue buying wheels clipping the brakes so watch out for that
@SpeedCultureStudios
Жыл бұрын
Brake clearance definitely mentioned in the video! Every wheel is a little different even if the same offset
@SinFullRexon55
Жыл бұрын
What would you recommend for my setup if mine was AWD? I want my car to have the same fitment as yours
@SpeedCultureStudios
Жыл бұрын
same. just listen to what I said about awd tires
@JosephRomero28
10 күн бұрын
What type on tires are those?
@SpeedCultureStudios
10 күн бұрын
Firehawk indy 500
@alialobaidy2525
6 ай бұрын
i have a 2015 q50s and am currently running ESR cr1 19 x 9.5 +22. with michelin pilot sport 4s. they ride good but at high speeds, wheels shake a bit. I think they may be not balanced correctly. Just wondering if my wheels would cause that shakyness
@alialobaidy2525
6 ай бұрын
my tires are 255 40 19 all around
@562sela9
Жыл бұрын
I’m only going 18x8.5 because I want to be low without rolling fenders. I feel like if I were to get 19x8.5 with the drop I want I would have to roll the fenders an I don’t want to touch them, do you agree or should I go with 19s??
@SpeedCultureStudios
Жыл бұрын
I talked about 19x9.5 in this video and never mentioned having to roll fenders. Depending on your offset, you would not need to roll fenders for an 18x8.5. Its a smaller wheel
@ashtiensims5065
3 ай бұрын
What tire and wheel sizing would you recommend for AWD to get the same setup?
@messihernnadez3219
Жыл бұрын
Can I go staggered even though my car is awd? Will it mess up a stock suspension? Mpg? Anything?
@SpeedCultureStudios
Жыл бұрын
You can but no need to stagger wheels. But no matter what you do, just be sure the overall tire diameter is the same front and back.
@562sela9
Жыл бұрын
Hey bro I’m gonna pick up some rims this weekend, gonna go with Avid1s hyper black 18x8.5 with +38mm an gonna lower her on mega racing coilovers what you think about the wheel specs think they’ll fit good?? What color are the rims in this video I like how they go with the black paint an still show out
@SpeedCultureStudios
Жыл бұрын
They are anthracite or gunmetal
@chiefmaduka
Жыл бұрын
Hey, would you get a remote start for your Q? Do you think they are trust worthy
@SpeedCultureStudios
Жыл бұрын
No I never would. Never been interested in having one and not interested in adding weight.
@Oo-Shiesty
Жыл бұрын
hey speed, what do I need to get my q50 aligned after installing bc racing coil overs? my technician told me I needed camber arms or something? I'm not too sure what I need for an alignment. would appreciate the help!
@SpeedCultureStudios
Жыл бұрын
It can be aligned but depending how low you are you probably won’t get back to factory specs-but you wouldn’t want to if you’re lowered anyway. If you need more adjustment, then yes adjustable upper control arms for the front and control arms for the rear. I have videos on them.
@billydacanay8243
9 ай бұрын
Quick question brother! Why have different tire widths for the front and the back?
@SpeedCultureStudios
9 ай бұрын
Some do it simply for fitment reasons-can’t fit a 275 in the front. But you have to consider what the car is used for. Drag racers have narrow tires in front for less friction. On a corvette with 325s in the rear, you would never put a 325 up front because it would be wild to steer that thing.
@slide50t
Жыл бұрын
Hello just wanted to ask/get your perspective? I have a 2009 370z Touring , 114K miles. I'm going to install the AEM CAI, Fast Intentions RHFC and the Injen True Duel Full Catback Exhaust system. Also I'm having the Mishimoto upgraded radiator, stillen transmission cooler and the 25 Setrab oil engine cooler. With everything stated, is there major concerns I need to be aware of with all these modifications? Also I see you had your q50 tuned, could you feel a difference and was it beneficial and safe for the engine? Thank you
@SpeedCultureStudios
Жыл бұрын
As long as your tuner knows what they are doing it is safe-and if your car is in good health of course. But with those modifications a tune is necessary. It won’t run properly or to it’s fullest potential with being tuned. Oil and trans cooler never hurts. Not totally necessary unless you’re tracking the car but it’s a good proactive step
@Captainscrim59
9 ай бұрын
I’m sure u covered this but a 2016 q50 on rsr down springs if I wanted nearly flush and 19 inch rims or 18 what should my with and offset be flush or nearly flush I owned a 07 g35 and had 19 9.5 22 and hated the poke I really don’t want that to happen again
@ericramsarran9069
Жыл бұрын
Hey man, I have a 2014 q50s 3.7 with the big brakes. I'm torn between the offsets, because i've been on the fourms and fitment industy and still not sure what offset to go with. I'm planning on running a square setup (due to awd) so im leaning towards 19x9.5 + 22 or + 30. around there. Will that clear my big brakes and which one would give me the most flush fitment. I forgot to mention im also lowered on Bc coilovers. Thank you!
@SpeedCultureStudios
Жыл бұрын
I talked about this in the video. Generally that’s a pretty safe offset but every wheel is different.
@getbusyeian6426
Жыл бұрын
Great video, definitely eased my mind and I know what I need to get.
@SpeedCultureStudios
Жыл бұрын
Glad to hear that!
@lewis6720
Жыл бұрын
Speedculture I see your offset is +29. Is the 3.7 bodystyle a little different from the 3.0? I thought with a 9.5 wheel and a +35 offset it would be flush.
@SpeedCultureStudios
Жыл бұрын
+35 is close to flush, but not quite. That’s what I had before with a 8mm spacer as I mentioned in the video.
@Gofast8954
5 ай бұрын
What about 19x 9.5 +22s ? And on what tire size should I run that on?
@Jonathan-gr9ex
9 ай бұрын
Hey brother I’m thinking of getting the cosmis racing XT-006R 18x9.5 +10 5x114.3 you think the offset will clear my akebonos? For the rear only
@SpeedCultureStudios
9 ай бұрын
Probably not. They don’t clear my Brembos on the 350z
@justooo23
5 ай бұрын
Does this fitment and tire setup work on a 09 G37xs on stock suspension with the sport wheels? I want it to fit flush but I want the “meaty” look as well. If that doesnt work what would you recommend?
@itsrass1378
Жыл бұрын
If I’m trying to get nearly flush with 19x10.5 with +30 with 255s should be fine with the sport brakes it seems like.
@SpeedCultureStudios
Жыл бұрын
Might have some wheel poke but tires might tuck. If you have adjustable control arms I’m sure you can make it work
@itsrass1378
Жыл бұрын
@@SpeedCultureStudios im looking at esr rs2 and found 19x9.5 +22 offset or 19x9.5 +35 that might work better? Im just confused at all the different opinions on what’s the best specs plus I got stock coils
@adrian3133
11 ай бұрын
Would you still recommend a 19x9.5 +29 for a 2015 q50 with regular brakes?
@SpeedCultureStudios
11 ай бұрын
Definitely
@mal7766
Жыл бұрын
Would 18x9.5 with a 30mm offset sit well with 265/35 all around or would there be some issues, I plan to put RSR lowering springs, not really sure about what my tire sizes should be because i’m RWD
@SpeedCultureStudios
Жыл бұрын
Yes they should.
@hatecaps_
5 ай бұрын
yo brodie im gettin a q50 this weekend I’m wondering what do I have to do to run 19 inch tires, I wanna lower it just like how his is I’m a noob at this I’m lost
@seppy3272
Ай бұрын
does this effect your Speedometer reading?
@SpeedCultureStudios
Ай бұрын
If the overall diameter is small/larger than your factory wheels, yes. But there is a calculator online that allows you to calculate the difference so you know
@radamesgoris4383
Жыл бұрын
Hey I have 19x9.5 + 40 they don’t clear my big brakes what space or would you recommend?
@SpeedCultureStudios
6 ай бұрын
Z1 spacer and install extended studs. I can’t tell you the size of spacer without a close look
@derisreyes4783
8 ай бұрын
What do you think about , GTR wheels?
@SpeedCultureStudios
8 ай бұрын
They are awesome and look great on the Q50
@MichaelWilliams-vg1ou
11 ай бұрын
I actually picked up F14 my 2018 3.0t silver sport. But I need hub rings. What size did u use? Or would for my Q?
@SpeedCultureStudios
11 ай бұрын
I can’t remember off the top of my head. Look up hub bore diameter for Q50 it’s like 66.1 or something and then hub bore for the f14s and that’s your size
@MichaelWilliams-vg1ou
11 ай бұрын
Do you know what the f14 are?@@SpeedCultureStudios
@David12456
4 ай бұрын
Will 275/35/20 rear tires and 245/35/20 front tires be good with tein lowering springs?
@SpeedCultureStudios
4 ай бұрын
Really depends on the wheel specs
@vz.arturo
9 ай бұрын
Hey bro I’m having trouble with fitment. Just wondering if you can help out. Just bought some tandem wheels 19x10.5 +22 for my q50 and I’m not sure if 265/35/19 will work out all around without any issues. I’m on springs dropped 1.6 Font & 1.4 rear
@SpeedCultureStudios
9 ай бұрын
Probably won’t fit in the front without a little extra camber.
@vz.arturo
9 ай бұрын
do you recommend going 255/35l19 in the front?@@SpeedCultureStudios
@vqarlos
Жыл бұрын
I just got a good deal on my first set of wheels+tires 18x9.5 +22 & im starting to regret the offset. Seems like everyone is running +29 to +35. Will I need any adjustment? Will I poke or tuck in too much? Any tips?
@SpeedCultureStudios
Жыл бұрын
Might have slight poke depending on how low you go. Also tire size will play into it. Might need control arms to adjust
@vqarlos
Жыл бұрын
@@SpeedCultureStudios I have stock suspension for now but my tires are 245/40 square. So the lower I go the less poke I will have? I’ll definitely have to look into control arms. I want to keep my wheels since they weigh less than 19lbs
@gasziantulloch6705
Жыл бұрын
Well done bro 😎 nice video Rasta
@trippyspartans521
4 ай бұрын
Is this possible with no spacer or coil overs pretty much stock
@andydibartolo-xg4gs
Жыл бұрын
can you specify whether this information is for RWD or AWD models? they are both totally different as far as how wide a wheel and tire set up can be
@SpeedCultureStudios
Жыл бұрын
I thought I mentioned it in the video, but they are not different in how wide the wheels can be. It is the diameter of the wheel that matters. They can be different widths as long as the diameter is within 1% front to back.
@Skirr_Skirr
2 ай бұрын
Hi there! Thank you for the Q50 content! I was wondering what difference would it make if i went with a square tire setup on those same wheels. So 255/40/19 all around. Do you think I'd have issues with the tire sticking out? I have the exact same car as your's. Thanks for the help :)
@SpeedCultureStudios
2 ай бұрын
Did you listen to the video? A 255 is a narrower tire than the rear tires I described at 275 so so there will not be any poking out.
@Skirr_Skirr
2 ай бұрын
@@SpeedCultureStudios God bless you. I watched the video but I'm just trying to not get bit in the ass again by getting new wheels and tires and not having proper fitment. Just dotting my i’s and crossing my t’s. Thank you sir!
@SpeedCultureStudios
2 ай бұрын
@@Skirr_Skirr 😂 understood. I tried to make things clear so just wanted to be sure you watched. If you got the same wheels with the same specs, a 255 will fit just fine
@mazzone69
9 ай бұрын
Hello there. What would be the best optional tires fitment for the 2021 Q50s with OEM wheels? I would like a more flush looking without rubbing issues, I’m also considering lowering suspension for a little more stiffness but nothing crazy. Current OEM size Front 245/40ZR19 and Rear 265/35ZR19. Thank you in advance for your advice.
@SpeedCultureStudios
9 ай бұрын
That’s probably the best you’ll get with factory wheels. Spacers are an option but then there is more to consider like lug length
@mazzone69
9 ай бұрын
@@SpeedCultureStudios Thank you for your reply, very informative. In other words, with stock wheels stick with stock tire’s size.
@SpeedCultureStudios
9 ай бұрын
@@mazzone69 you can go a bit wider than stock generally but I think a 265 is probably the widest you’d won’t to go on stock wheels. Yo get better fitment you’d need to push the wheel out closer to the fender or with a different wheel
@daniellago6959
8 ай бұрын
I have the same OEM wheels with same sizes in the front and the back? Did you go wider on the back or did you stay with the 265? Also, did you put spacers to push the tires flush with the fenders?
@SpeedCultureStudios
8 ай бұрын
@@daniellago6959 same size wheel different size tire. 275s in the rear.
@chrismartinez-qe8wj
4 ай бұрын
My stock q50 2018 luxe. Has oEM 18’ rims. Comes with 225/50r18 but what tire would be best for better grip bc I got RWD
@SpeedCultureStudios
4 ай бұрын
I’m not sure how wide the factory wheel is. I’m sure you can get wider than a 225 on there tho. Maybe a 235. The tire itself is more important that a few more mm of width though.
@davewhitney3022
Жыл бұрын
Very nice thorough video
@SpeedCultureStudios
Жыл бұрын
Thanks for watching 😉
@anthonysantana9193
24 күн бұрын
Would I be able to run 265/45/18 ? I see people running 255/40/19 on rwd I was curious
@SpeedCultureStudios
24 күн бұрын
Rear yes, front you’d likely get some rubbing depending on wheel design and stance-but you’ll have a bit more room with an 18 than a 19
@anthonysantana9193
24 күн бұрын
@@SpeedCultureStudios okay yes I had planned to run that only for the rear ! Thank you
@KemarBenjamin-no7bw
Жыл бұрын
What size would you recommend for q50 18 inch rims
@popdel8160
Жыл бұрын
Idk if this is a dumb question or if you answered this in the video, but after you put the spacers on in the old fitment did it clear for rear and front baby brakes, asking bc It’s looks perfect and I really would like to do that exact same fitment
@SpeedCultureStudios
Жыл бұрын
I don’t know what you mean by old fitment. These are the only wheels I ran with the big brakes. They cleared without spacers.
@popdel8160
Жыл бұрын
@@SpeedCultureStudios I was talking about the fitment with the 35 plus offset with the old rims, wanted to know if those cleared the rear and front for the baby brakes
@qherbo
Жыл бұрын
I know you said something about the AWD models but what specs would you recommend for a 2020 Q50s AWD
@SpeedCultureStudios
Жыл бұрын
Listen to what I said about the AWD models lol. Specs are no different, just have to consider tire size if you're doing a staggard setup.
@ethanflores5415
6 ай бұрын
what’s the size on the wheels and the concave profile ? i’m on the website but i can’t seem to find that specific spec. can you provide the link for that exact spec please.
@SpeedCultureStudios
6 ай бұрын
1:40
@ceniux1022
Жыл бұрын
what would you say to get similar to this for awd?
@SpeedCultureStudios
Жыл бұрын
You could get a slightly more aggressive offset for the rear and run 255/40/19 tires on all 4
@alvinv2k536
Жыл бұрын
19x9.5 with +29 offset all around?
@SpeedCultureStudios
Жыл бұрын
Yes sir
@MichaelWilliams-vg1ou
11 ай бұрын
with no spacers? Got a 2018 q50 sport@@SpeedCultureStudios
@Smoxve
Жыл бұрын
Thank you!
@2FittedBW
Жыл бұрын
I want some hotboi fitment but I do love that setup
@SpeedCultureStudios
Жыл бұрын
😂 thanks!!
@SinnerAJ
Жыл бұрын
I got 20 MM spacers with rsr down springs, will this 275-255 set up fit? Don’t know much about fitment tbh I’m struggling
@SpeedCultureStudios
Жыл бұрын
I had a lot of info and references in this video. Just depends on your wheel width and offset
@eightyHHD
Жыл бұрын
am i being a idiot? because it just keeps taking me to a corvette specification on the website
@SpeedCultureStudios
Жыл бұрын
What website are you referring to?
@eightyHHD
Жыл бұрын
@@SpeedCultureStudios motorsports LA website
@eightyHHD
Жыл бұрын
@@SpeedCultureStudios also what tires do you have on? i'm on factory suspension so i don't want my wheels rubbing against my brand new bumper
@fadibanno5702
Жыл бұрын
What do you think a 19x8.5 +35 offset will be? I’m ok with flush or more inside, I hate tires that stick out, will these be fine?
@SpeedCultureStudios
Жыл бұрын
In the video I discuss how to get a flush look, which is 19x9.5 +29. That wheel is 1 inch wider than the one you asked about and the center is concaved 6 inches more than the one you mentioned. If you can visualize that, your wheel would be in from the fender a half inch or more.
@fadibanno5702
Жыл бұрын
@@SpeedCultureStudios Excuse my ignorance haha, but just to confirm you mean it will be half inch or more inside the fender correct? thank you for your response
@SpeedCultureStudios
Жыл бұрын
@@fadibanno5702 yes more tucked back into the fender
@JM-ku2in
11 ай бұрын
@@fadibanno5702 In the end, if you chose the 19x8.5+35?, is it that I also have the opportunity to buy ones like that but I don't know what to do?
@fadibanno5702
11 ай бұрын
@@JM-ku2in yes! I got Aodhan AFF7 19/8.5 +35 all around and put them 255/40/19 Conti DWS and the cars look so wide and mean, and rides so much better. Those rims were just about 20lb a piece and forged
@jordantrama7043
10 ай бұрын
I want this set up do I need to lower it too tho I’m stock Rn?..
@SpeedCultureStudios
10 ай бұрын
You don’t need to but it just improves the look and performance a bit
@Oo-Shiesty
Жыл бұрын
What offset would you recommend for ESR Rf2 19x9.5 for somewhat the same look as yours (same tires, and on bc coils), but with a little less concavity
@itsrass1378
Жыл бұрын
I’m getting esr RF2 aswell for my q50s and pretty sure 19x9.5 +22 will work since theirs a few others running that size. That’s my concern to because of the big brakes.
@Oo-Shiesty
Жыл бұрын
@@itsrass1378 I found someone running 19x 10.5 +30 and has a bbk, idk what tires though.
@itsrass1378
Жыл бұрын
@@Oo-Shiesty after doing research 19x10.5 +30 with 255s seems like it would work better
@Oo-Shiesty
Жыл бұрын
@@itsrass1378 bro lmk the fitment when you get it? I’m really looking forward to getting some soon
@itsrass1378
Жыл бұрын
@@Oo-Shiesty yeah ngl after looking more and got some advice from speed culture studies about that set up it 19x10.5 +30 would pock out and since I’m in n stock coils 19x9.5 +35 would look a bit better and to play it safe
@bva2321
Жыл бұрын
You can fit 275 tire on 9.5 inch rim ? No concern with the sidewall strength giving out ?
@SpeedCultureStudios
Жыл бұрын
Yes-no problem at all. A 275 on a 9.5 is not even pushing it. You saw all the pictures in the video, right? Not even a bulge
@bva2321
Жыл бұрын
@Speed Culture Studios Yes, seen all the pics. Been following for a while. Setup looks slick. Best in the biz. Someone once told me that going bigger than 255 on a 9.5 better have a stiff sidewall. I'm awd on 245 tho. Think the biggest I would go is 255 all around. Unless I could go bigger. Lol
@SpeedCultureStudios
Жыл бұрын
@@bva2321 thanks for following along! But whoever told you that is nonsense. I wouldn’t go wider than a 275, but there is no risk to the sidewall. Indy 500s are known to be a little soft and I still don’t get any tire roll.
@bva2321
Жыл бұрын
@Speed Culture Studios Good to know ! Thank you sir ! Keep up the good work.
@OxBlitzkriegxO
Жыл бұрын
@@bva2321 whomever told you that has zero clue what theyre talking about. dont ever listen to them ever again for anything. widest tire that will fit under the car without poking out is a 325/30/19. you can pair that with a 275/35/19 staggered fitment for AWD models because theyre identical tire diameter, no problems at all.
@jefeontop8752
Жыл бұрын
what’s your drop on coilovers ?
@SpeedCultureStudios
Жыл бұрын
About 2” lower than factory
@jefeontop8752
Жыл бұрын
@@SpeedCultureStudios can you make a video showing your coils drop , i just got some bc coil overs and your drop seems just right , not too low and super flush
@SpeedCultureStudios
Жыл бұрын
@@jefeontop8752 I have a video on all of that. I have a few different Coilover adjustment videos
@jefeontop8752
Жыл бұрын
@@SpeedCultureStudios can you direct me to a video where you showed your last fitment , or a good height for someone that daily drives and just wants to get rid of the gap
@SpeedCultureStudios
Жыл бұрын
@@jefeontop8752 I did a fitment video recently. Just go to my channel and scroll down through recent uploads. It’s not far down
@billwhite7551
9 ай бұрын
I have a 2018 Q50 Red Sport AWD. What wheel/tire spec would you recommend. I have not modified my suspension, nor plan to at the moment. Would 19x9.5 +29 wheels and Firestone Firehawk Indy 500 tires work on all four wheels by clearing the brakes and not rub on the fenders?
@SpeedCultureStudios
9 ай бұрын
Hard to know without knowing the wheels-every wheel has a different design, but the size you mention “generally” fits. Just don’t go crazy with tire size
@billwhite7551
9 ай бұрын
I was thinking 255x40R19 for all four tires and getting the Firehawk Indy 500s. Do you see any concerns with FORGESTAR F14 wheels for these tires and my sport breaks? Will spacers be required? Lastly, What is the difference (just offset I suspect) between the FORGESTAR F14 ULTRA DEEP CONCAVE and regular FORGESTAR F14 wheels?@@SpeedCultureStudios
@8bit4lifejosh
Жыл бұрын
Hey just wanted to a know where you got the side skirt splitters I don’t know what they’re called exactly, if you can send me the link
@SpeedCultureStudios
Жыл бұрын
Vicrez side splitters.
@8bit4lifejosh
Жыл бұрын
Vicrez side splitters without the winglets attached??
@SpeedCultureStudios
Жыл бұрын
@@8bit4lifejosh that’s correct. Tan thebwinglets for a bit but didn’t like them
@edgardojuarez9067
9 ай бұрын
Would I be able to fit a 2020 q50 RS 17inx10 50+ offset 305/45/17
@SpeedCultureStudios
6 ай бұрын
17s won’t fit the sport brakes
@edgardojuarez9067
6 ай бұрын
@@SpeedCultureStudios I got d5 17s 305-45-17 so it does fit. 2020 RS
@SpeedCultureStudios
6 ай бұрын
@@edgardojuarez9067 oh you’re talking just the rears. That makes more sense now
@supradoom
Жыл бұрын
It's too bad the Q50 never came in stick shift (In America). I do like the look of it but I think that's my biggest problem with it.
@SpeedCultureStudios
Жыл бұрын
It’s nice to drive an auto.
@supradoom
Жыл бұрын
@@SpeedCultureStudios They are okay.
@SpeedCultureStudios
Жыл бұрын
@@supradoom I’m not sure how old you are but I can tell you when all you have are manual cars, it’s definitely nice to get into an automatic every once in awhile.
@supradoom
Жыл бұрын
@@SpeedCultureStudios I'm 39 and have had too many cars to count. I agree auto is nice for plenty of things. I think your Z is stick, and as long as you have ONE stick car I think that's fine. I'm am not against owning a auto Q50, I had an auto G35X, but if it had stick I'd think of it more as an toy than I do now.
@the_next_adventure
Жыл бұрын
Super flush! 😊
@messihernnadez3219
Жыл бұрын
WASSUP MAN!!!!
@dbsimms63
Жыл бұрын
Thanks for the info. Is there anyway, in you opinion, to run an 18" x 9.5" and clear the sport big brakes. I run a 18" x 9.5" +30 with a 14" rotor and Baer 6 piston calipers on my 2004 SVT COBRA. I'd like to run an 18" to reduce rotational mass even further and the tires are cheaper.
@SpeedCultureStudios
Жыл бұрын
Some 18s clear the big brakes and some don’t. I test fitted 18” aodhans on the Q and they would not fit.
@dbsimms63
Жыл бұрын
@@SpeedCultureStudios which Aodhans? I'm running AFF7's on my cobra. I have a spare, I may test fit it on the Q50
@SpeedCultureStudios
Жыл бұрын
@@dbsimms63 ds02
@OxBlitzkriegxO
Жыл бұрын
cheap 18s wont clear, decent ones will. since youre familiar with mustangs, sn95s at least, this may be of help. most wheels offsets that fit s197 and s550 mustangs will exactly fit Q50s. an enkei RPF1 18x9.5 +45 OR +38 will both fit and theyre both ~17.5lbs.
@SpeedCultureStudios
Жыл бұрын
@@OxBlitzkriegxO Price is not the deciding factor-unfortunately it’s not that simple.
Пікірлер: 185