i can tell you from experience, i worked as a tire guy in my younger days a lot, big rigs, buses, loaded tractor tires, like 6 ft tall tractor tires, and i never had a fit like this go cart i worked on, the hardest tires ever, right next to to some 700c road bike tires. so when i seen you do that as easy as i open my front door i was happy for you.
@sixtyfiveford
6 жыл бұрын
These tiny tires can be a bugger.
@emeltea33
6 жыл бұрын
carolina beacher those 700cc are a bear! I had 2 flats on the same tire within a couple days... gave it up altogether.
@emeltea33
6 жыл бұрын
carolina beacher those 700cc are a bear! I had 2 flats on the same tire within a couple days... gave it up altogether.
@JDLarge
5 жыл бұрын
Back in the day being enlisted I learned a trick at the motorpool. Since then I’ve always used a thin pack of bearing grease on the rim ring and it’s never failed me for a quick guaranteed seal first time every time. (Vasoline works in a pinch and is cheap too) Sure it’s a lil messy but it works and after a quick wipe you’re good to go! I’ve heard some say that petroleum distillates affect the rubber to deteriorate it but I’ve never seen it myself and have been doing tires this way just about forever. (Almost 40 years) I just think they’re the folks afraid to get dirty🤪 Also a benefit is when a little grease stays on the rim, it moves around almost liquefying with the heat of summer and use to add a rustproofing element to the rim itself😉.Thanks for sharing brother. It’s refreshing to see someone that has their sh!t together share for the good of all. Peace...
@sixtyfiveford
5 жыл бұрын
I'll have to try out some grease. It makes perfect sense.
@tidefan4987
3 жыл бұрын
Spent an hour trying to put tires on my tiller. Stopped and watched you video and had both on in 15 min. Thank you !!
@sixtyfiveford
3 жыл бұрын
Glad it helped!
@tino_7206
2 жыл бұрын
Hey man! Just changed the inner tube on my tiller and this vid helped me out so much! The soapy water made it a million times easier. Thank you!
@destinationhomerenovations2749
4 жыл бұрын
Great video, thank you. I was about to tackle the almost impossible task of removing two rims from an old Troy built tiller. Not any more. I removed the old tire easily, now I’m just waiting for the new tire to install. Thanks again
@Rbenterprises4
10 ай бұрын
Thank you for this video! I was able to pull the wheel and lock it in a vise. Putting the new tire was tough until I watched your video again. Vice Grips-genius!
@mustie1
6 жыл бұрын
l like that tire chuck too,
@fordguyaj5581
6 жыл бұрын
Mustie1 hey.. I was just heading to your channel to watch the next beaver video
@sixtyfiveford
6 жыл бұрын
It's a great tire chuck.
@gr8rizhe
2 жыл бұрын
The "plastic bag" tip!! Worked perfectly!
@arthurgaudreau6492
3 жыл бұрын
Thank you! Thank you! Thank you! You saved me so much time, aggravation, and expense. Seeing how it is cold outside, I used my wife's hairdryer to soften up the rubber a little. The plastic bag trick was much easier than the rope around the wheel.
@sixtyfiveford
3 жыл бұрын
Glad it helped!
@fallofmodernity
3 жыл бұрын
Your tubeless tire replacement video saved me hours of wasted time. YOU ROCK. Thanks for the awesome video!!!!
@sixtyfiveford
3 жыл бұрын
Thanks, I'm glad you liked it.
@katzkatcher
6 жыл бұрын
As always a great video with lots of good information that the other guys leave out...
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@clauslundberg9224
6 жыл бұрын
You make it look easy - thanks for sharing
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@coobru
2 жыл бұрын
This is the video I've been searching for. Been trying to get a tire on my snowblower and the rim is rusted to the thing. Thank you!
@thedriver02
6 жыл бұрын
good job, great idea simply leaving the rim on the machine. I'm actually in the middle of filming fixing a tire leak on my craftsman tractor, liquid filled!
@sixtyfiveford
6 жыл бұрын
Liquid filled makes it that much funner.
@bctruck
6 жыл бұрын
Ive wasted at least a couple years of my life trying to get rusted rims off rusted axles. Next time, Its staying on the mower while I use this method!
@sixtyfiveford
6 жыл бұрын
I've seen guys ruin their entire machine/damage the transmission trying to get these slip on rims off.
@JOEZEP54
6 жыл бұрын
Hey Moe another nice demo with good tips. Awhile back someone recommended using the vice grip as an extra hand, what a time saver. I had one of my tractors with a a rim rusted on. No matter what I did it wasn’t coming off. Ended up doing just as you did but wish I started out going that way first. Lost hours trying to get it off. Lesson learned LOL. Stay well, Joe Z.
@sixtyfiveford
6 жыл бұрын
I've seen people ruin their transmissions by trying to get the rim off the axle. Most front wheels on a riding mower I will take off but I generally won't attempt a rear one anymore. Tillers and Snow blowers I generally won't attempt either and I do them right on the machine.
@JOEZEP54
6 жыл бұрын
I had the misfortune of doing that myself on an older Montgomery Wards lawn tractor. I had to take the tranny off split it open to change a c clip on the shaft. The only good thing about that repair was the oil was about 18 years old so a change was due. Funny still could not get the rim off the axle. That is when I started to use the method you demoed.
@opichocal
6 жыл бұрын
Perfect timing. I just got my new ZTR tires in this week. I've watched discount tire change them before and 3 guys were cussing at them. This should be fun and hopefully I save $30
@lewiemcneely9143
6 жыл бұрын
I had one I tried to change on a cart. Couldn't do it so I took the whole thing back where I got the tire. Took 4 guys to do it. I'll change wheels next time.
@passthatcap
6 жыл бұрын
Dude, seriously awesome tips right there. Way harder to do on a bench top. Great vid. 😎👍🏼
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@robertknight4672
Жыл бұрын
On snowblowers I would highly recommend preventive maintenance keep the rim from rusting on to the axel. Especially if the snow blower uses pins to hold the wheels on and it gives you the option to disengage one-wheel from the axle for easier turning.
@jerzeedivr
3 жыл бұрын
I had trouble then I watched your Video and tried with Rim mounted to snow Mach. That worked, but it takes persistence. Thank You!!!
@sixtyfiveford
3 жыл бұрын
Great to hear!
@rodneysooy5428
4 жыл бұрын
Make sure you get the bead sealer on the inside of rim also, before you seat the outer bead. Great video. Guarantee it saved some folks like me the nightmare of trying to get that rim off the shaft!
@sixtyfiveford
4 жыл бұрын
Thanks.
@FranklyRustic
3 жыл бұрын
Well done! A pro job creating this instructional. I'm going to give this a go, right now. Cheers.
@chucksterock
6 жыл бұрын
For smaller tires you can use motorcycle tire irons as they're much smaller. Saves your tires.
@steedandersen
5 жыл бұрын
Love the grocery bag trick. That will help at work when I'm servicing those tillers with antique tires.
@sixtyfiveford
5 жыл бұрын
Thanks, I'm glad you liked it.
@MrTimdtoolman1
6 жыл бұрын
The best advise you gave was to leave the rim on the machinery Haha! I replaced a tire on my lawnmower and took the rim off, I got the tire on there but the hardest part for me was holding the rim. Very informative video, once again.
@sixtyfiveford
6 жыл бұрын
Hey Thanks.
@davidhamm5626
6 жыл бұрын
The plastic bag is a great idea ! And I always wondered about that threaded part and what it is for.
@sixtyfiveford
6 жыл бұрын
Thanks David. -Moe
@billpotter8714
6 жыл бұрын
Love that dog and learned something too.
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@travishuisman1817
6 ай бұрын
Saved my bacon and a lot of work! Great video. Thank you.
@user-oo1oo2hd9b
2 жыл бұрын
great job! I need to remove the tire, so I can remove the rim. I love the vise grip trick.
@Rickmakes
6 жыл бұрын
I would add, if you have directional treads, make sure you pay attention to the tread direction. I also remember seeing a tire replacement video where they had an aerosol can of bead lube. That might be nice for a DIYer. When I was a tire installer, our bead lube was the consistency of snot.
@sixtyfiveford
6 жыл бұрын
Aerosol bead lube? I'm going to do a Google search, that sounds pretty neat.
@DoingItCheap
6 жыл бұрын
EXCELLENT idea to change the tire in place ! I cheat and use the small tire changer on my workbench. You might like my homemade penetrating oil / rust buster for removing those rusted on wheels or nuts. I am making a valve stem installer similar to the commercial ones because that little one gives my arthritis trouble sometimes.
@sixtyfiveford
6 жыл бұрын
I'll throw a rod into my vice and do it that way sometimes for the small front tires on riding mowers. The fronts are easy to take off the tractor though. I won't mess with pulling the rim off the back of a tractor though as I'll waste more time doing that than changing a tire.
@hdman97
6 жыл бұрын
You sure make it look easy Moe, The use of the vice grip is genius lol
@sixtyfiveford
6 жыл бұрын
Hey Thanks.
@markdorothy7451
2 жыл бұрын
Great video. I've watched the videos on removing the wheels and none looked easy..This is all I need to know to install new tires. Mine both have rot. Thanks for great info!!
@sixbolt
2 жыл бұрын
Thank you for the vice grip trick, that helped me out a lot !
@joshuawhitehead4865
Жыл бұрын
Great video! Very helpful! Love the confidence! 5⭐
@lewiemcneely9143
6 жыл бұрын
I just ues gun grease to bead a tire up. If they're weather cracked I just put in a tube. Slime works good with punctures too. Good job!
@sixtyfiveford
6 жыл бұрын
Have you seen that tire soap stuff? It's like grease but thicker and comes in a big bucket that you can reuse.
@mattsasso505
5 жыл бұрын
This vid was great but wanted to add: if you are putting carlisle 4.80-8 power lug tires on a troybilt horse tiller you will need to double strap it to get the bead to catch and air it up. Getting the tire on and off was easy. catching the bead was the worst of my life. I finally solved it by using 2 cam straps applying medium pressure. I positioned the cam straps with the cams directly across from each other and cranked it to a medium pressure. It finally took air. Those carlisle tires have no give and the valley in a troybilt rim is deep. I hope this saves some other guy and hour or two.
@sixtyfiveford
5 жыл бұрын
Those Chevron tires are always a bugger on the Troy-Bilt Horse tillers. I generally have to use bead sealer to help glue them to the rim.
@Qingeaton
2 жыл бұрын
I am getting ready to do this and was talking with my son who was saying we need to get those wheel's axles lubed up and I'm thinking no way am I fighting all that. KZitem confirmed now. Thanks
@stefantwotimes
6 жыл бұрын
You are the Man,,Thanks,,,
@sixtyfiveford
6 жыл бұрын
Thanks for watching.
@DAS-Videos
6 жыл бұрын
You made it look pretty easy. I tried changing the small tires on the front of my mower and I couldn't do it. Had to bring it to the shop for them to do.
@sixtyfiveford
6 жыл бұрын
Wrestling tires is never fun work.
@freddycugarjr
3 ай бұрын
Thx 4 the help brother!
@wyattoneable
6 жыл бұрын
Always a pleasure!
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@aleblanc3547
6 жыл бұрын
That bead sealer is the ticket. They make inexpensive machines to install small tires, but it also means you have to remove the wheel--which as you said, can be worse than changing the tire "by hand" as you did. Thanks, Moe!!
@sixtyfiveford
6 жыл бұрын
I've come across some pretty nasty rims that were no match for bead sealer.
@one4stevo
6 жыл бұрын
Great tips love your work
@sixtyfiveford
6 жыл бұрын
Thanks for watching.
@mnight207
6 жыл бұрын
YESSSS...Ive been looking for a good lock on air chuck
@sixtyfiveford
6 жыл бұрын
I had a subscriber point me toward this one and I've been very pleased with it.
@joshuawhitehead4865
Жыл бұрын
Great video! Very helpful! Love the confidence! 5⭐
@TyrantOfHellsLand
4 жыл бұрын
great video, thanks for making it. this is what gave me the confidence to do my own tiller tires.
@sixtyfiveford
4 жыл бұрын
Glad I could help
@MJTAUTOMOTIVE
6 жыл бұрын
Another great video Moe. Cheers from Queensland Australia.
@sixtyfiveford
6 жыл бұрын
Thanks Mark.
@jeremiahwilliamson9699
6 жыл бұрын
Great tips, keep up the good work.
@sixtyfiveford
6 жыл бұрын
Thanks for watching.
@RG-wy1ol
5 жыл бұрын
Thank you for making this video 👍🏼👍🏼
@sixtyfiveford
5 жыл бұрын
Thanks, I'm glad you liked it.
@hunt4fish
6 жыл бұрын
I do it similar and that is usually the easiest way.....cheers
@sixtyfiveford
6 жыл бұрын
Thanks, for watching.
@gregoryhume9816
6 жыл бұрын
Excellent video, how many bloody knuckles I've had from removing old tires on rims removed from the implement.
@sixtyfiveford
6 жыл бұрын
Wrestling tires should be an Olympic sport.
@gregoryhume9816
6 жыл бұрын
I know I'm going out on a limb here, but I purchased Harbor Freights two red manual tire changers. The small one I used for the snowblower already. The large one was used just before I sold the John Deere 855, of course, got two flats in a row within two weeks, second one was on me, too much air pressure. The smaller one works a little better than larger one, the long round bar for the larger one, the molded end that pokes into bead is not angled right, so I might cut off and reeled back on.
@joeo1352
6 жыл бұрын
Like the bag thing ,great tip ,thanks
@sixtyfiveford
6 жыл бұрын
Thanks, it works pretty good.
@golf-n-guns
3 жыл бұрын
I need to do this job on a rototiller, but want to install an inner tube, since I'm not replacing the tire.
@solituderiver2454
6 жыл бұрын
This was more entertaining than an action movie lol. Is he gonna get it...oh...oh...oh...almost oh no! And again...almost...almost YES! Mission accomplished hawhawhaw! I know, I lead a boring life lol.
@sixtyfiveford
6 жыл бұрын
The anticipation!
@leatherface9377
4 жыл бұрын
Thank You
@davidcheever1055
Жыл бұрын
Nice job
@sixtyfiveford
Жыл бұрын
Thanks!
@johannesvanhoek9080
3 жыл бұрын
Thank you sir !
@hookahb8299
2 жыл бұрын
Hey thanks bud!!
@richarddietz6145
6 жыл бұрын
Use murphys oil soap for tire line works great used it for years
@sixtyfiveford
6 жыл бұрын
I can't say I've used Murphy's.
@phxtonash
4 жыл бұрын
I totally get it, if you don't get it into the depression it won't fit. Thx!
@l.whitaker6073
6 жыл бұрын
The pointed end of your valve stem tool is an easy out for when the ears twist off and you can’t get the valve core out. You just pull the guts out with pair of pliers and backwards thread that end into it until it catches and starts unscrewing.
@tommyjarrell9788
4 жыл бұрын
Great video and excellent tips
@sixtyfiveford
4 жыл бұрын
Thanks, I'm glad you liked it.
@steeptakeoff
5 жыл бұрын
great dog
@teqnikool
4 жыл бұрын
I've looked through the thread, but I didn't find the link to buy the tires at a good price. Can you repeat it now? Great video, I have changed a wheelbarrow tire and it damn near killed me, I was stunned and delighted to see your video when I Googled how to change a rototiller tire!!
@sixtyfiveford
4 жыл бұрын
Below the video there is a description with links to tires.
@terencegillespie6675
6 жыл бұрын
Thanks for tips.
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you enjoyed it.
@douglaswatson3638
6 жыл бұрын
can we get a part no# for that air chuck?
@sixtyfiveford
6 жыл бұрын
It's the Haltec H-5265 amzn.to/2NxzcoY It has saved me a lot of headache.
@MarkKelly1307
3 жыл бұрын
So what you’re saying is I should take it to the tire shop? 😜 Jk. Good video, appreciate the tips
@watermanone7567
6 жыл бұрын
Nice Job; Thanks
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@dontblameme6328
6 жыл бұрын
Great video as always! Thanks!
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@jerrybeck8812
6 жыл бұрын
Good video!! You were telling about the 4 way tire deal and I thought yes I’m going to know what the pointy side is for, and you didn’t know either. No way :( anyway I’ve always used soapy water but I’ll try to find some of that bead stuff. I’ve been using contact cement for bead sealer and always has worked. Think I’ll get some bead sealer, I seem to always be doing little tires. Thanks.
@sixtyfiveford
6 жыл бұрын
I let a glob of bead sealer dry and it turns into a very rubbery stretchy substance. Almost like the rubber from an inner tube (a soft inner tube). It seams to seal the worst rusted rims I come across. I can't say I've ever tried contact cement.
@999thenewman
6 жыл бұрын
sixtyfiveford: Sounded like a nice day to work outside. Birds chirping away and all.
@sixtyfiveford
6 жыл бұрын
They were a little to happy that day.
@einstixx69
2 жыл бұрын
What size valve stem for that size of tire? Is it a common size?
@sixtyfiveford
2 жыл бұрын
Very common.TR413 is the most common and would work or you can get a shorter one, the TR412.
@moose64
6 жыл бұрын
Any tips on changing a motorcycle tire without pinching the damn tube? Apparently I’m really good at pinching tubes. Lol
@lewiemcneely9143
6 жыл бұрын
I got a buddy that uses pushrods. Must be the ones with the ball ends. Says it works like a whiz! I just use tire spoons and/or screwdrivers and go SLOW!
@sixtyfiveford
6 жыл бұрын
I've pinched more than my fair share of tubes. Even going slow catches me once in while. I do have very blunt tire tools that I'll use in these tube situations.
@iaxable
6 жыл бұрын
todd baker Put a little bit of air in it
@moose64
6 жыл бұрын
Thanks for the tip,,,that did the trick.
@f.k.burnham8491
3 жыл бұрын
I wished it was this easy on my M925 6X6. (Bead lock rims for those who don't know). Having a cracked rim from my semi to use under it made a world of difference though. About 400 lbs . of tire & rim (Super Singles) is not easy to wrestle solo. Any good hints for this? (Tire shops wont touch a bead lock. Basically because they have no idea of how to get them to seal. That is the easy part.)
@2LateIWon
6 жыл бұрын
Totally agree these stupid things always rust to the axels
@sixtyfiveford
6 жыл бұрын
They weld themselves on good.
@Anonymous-it5jw
4 жыл бұрын
Did you grow, buy or rent the third arm you needed to get the job done?
@sixtyfiveford
4 жыл бұрын
It feels that way sometimes.
@1fanger
6 жыл бұрын
Hey 65, great tips, as usual.
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@sbd661
4 жыл бұрын
Thank you!
@sixtyfiveford
4 жыл бұрын
You bet!
@not2fast4u2c
6 жыл бұрын
I will be looking for a can of that bead sealer !!!
@lewiemcneely9143
6 жыл бұрын
Use gun grease. I always do.
@sixtyfiveford
6 жыл бұрын
Grease would be nice to help it seal. Bead sealer has the added benefit to locking the rim to the tire for low pressure applications where you don't want the bead to spin on the rim.
@jimtwisted1984
3 жыл бұрын
Another vice grip would make it go a lot smoother.
@Guillotines_For_Globalists
6 жыл бұрын
Any tips for doing this when installing tubes? I punctured a tube with the screw drivers so I took the wheels to a small engine repair shop to do instead. Tires were leaky on a snowblower so put some tubes inside and never had an issue since.
@sixtyfiveford
6 жыл бұрын
Just going slow. I've put my fair share of holes in tubes and it generally only takes me once every couple years to slow down and take my time.
@ozzstars_cars
6 жыл бұрын
Those little tires are often a big pain to swap!
@sixtyfiveford
6 жыл бұрын
Thanks man.
@billsmith4840
6 жыл бұрын
Nice job
@sixtyfiveford
6 жыл бұрын
Thanks, I'm glad you liked it.
@bartdelabarre3432
3 жыл бұрын
Great vid!
@EricXRP
4 жыл бұрын
Great vid! Thanks.
@sixtyfiveford
4 жыл бұрын
Glad you liked it!
@johnr8476
6 жыл бұрын
Try the front tires on an old rear engine snapper mower.
@sixtyfiveford
6 жыл бұрын
I know what you mean. The smaller the funner.
@rickdacus1818
5 жыл бұрын
breaking the tire seal from the rim is a pain. Do you have any advise on breaking the seal?
@sixtyfiveford
5 жыл бұрын
I will generally hit it with a sledge hammer while still installed on the equipment. On some I will take it off and step on it or drive over it with the truck to peel the bead off.
@JamesThompson-ol3eu
2 жыл бұрын
I know this has been out for 4-5 years but had to comment - never seen anyone do such a fast expert job with small tires. I have a fight every time I touch one! Takes hours sometimes. I do work with smaller tires than this. Never seen bead sealer used! I may buy some. Have had the valve stem tool for over 40 years and did not know the purpose for all 4 tips or points! Sometimes now with all the cheap stuff from China you can buy tire and rim preassembled for as cheap as just the new tire. They are cheap quality.
@sixtyfiveford
2 жыл бұрын
I'm glad you like the video
@markcotter4213
5 жыл бұрын
How hard will it be to get the new tire off when it dry rots? Since you used the bead seal
@sixtyfiveford
5 жыл бұрын
The bead seal comes off effortlessly.
@markcotter4213
5 жыл бұрын
@@sixtyfiveford Thanks! I'll be using it on my mowers!
@douglaswatson3638
6 жыл бұрын
saw it!!!
@samiam6253
6 жыл бұрын
How hard is it to clean (the seam sealer) if you need to break down the tire.
@sixtyfiveford
6 жыл бұрын
It bonds itself to the rubber tire but isn't permanent. It just balls up easily when you need to get it off the metal rim or tire. It's essentially a heavy duty rubber cement.
@samiam6253
6 жыл бұрын
thanks
@senatorjosephmccarthy2720
3 жыл бұрын
Moe sir, those sealers make it a lot more difficult to remove the valve stem and tire. I wouldn't put that on my ..wheels.. at all, I'd clean up the ..wheel.., even the rim of the wheel. And Moe, I've used different types of tire compression ropes and hoses, they don't come off, they're safe and a great help to seal the ..tire bead.. to the ..wheel rim.. sir.
@sixtyfiveford
3 жыл бұрын
The sealers do make more difficult, but most of the small machines will never get tires changed again.
@joshuasmonk
3 жыл бұрын
Why have I not thot of using vice grips like that thank you
@sixtyfiveford
3 жыл бұрын
It makes it so much easier.
@TheDWZemke
3 жыл бұрын
I thought you put in a little lighter fluid and give it a light..
@sixtyfiveford
3 жыл бұрын
I've done that plenty of times as well.
@davidshowalter5808
6 жыл бұрын
Is that your tractor with the loader got a video on it
@sixtyfiveford
6 жыл бұрын
I have a video where I made forks for the loader kzitem.info/news/bejne/xp6DsWhucIaSioo Not really a video about it but I show it working at the end. It's a 1984 MTD 995
@jeffryblackmon4846
6 жыл бұрын
Easy-peasy.
@sixtyfiveford
6 жыл бұрын
Haha. Easy-Peasy....
@iaxable
6 жыл бұрын
Why not using a tube with the old tire?
@sixtyfiveford
6 жыл бұрын
The customer wanted new tires. Tubes were $14 a piece and new tires were $18.
@39knights
5 жыл бұрын
Not a huge fan of bead sealer for car tires. Im in a northern climate so most people change their tires twice a year on the same rims. Some rims are quite messy with the bead sealer compound which after the initial tire use actually makes the next and subsequent installs harder and labor intensive. I save it only for mechanically compromised rims where a the rim is still usable but hard to air seal even after a good cleaning.
@sixtyfiveford
5 жыл бұрын
Thanks for the input.
@martinblouin3639
6 жыл бұрын
what's your knife?
@sixtyfiveford
6 жыл бұрын
It's a Kershaw G10 Cryo. It's a decent budget knife that I don't feel bad about cutting garbage with.
Пікірлер: 188