You must've about froze doing this video! 🤣🤣 Can't afford these K Bodies because I bought 12-2X4's 8.
@chdinct6792
3 жыл бұрын
Nice vid. I have a few . To top it off you can remove the screw end like you did and reverse it to make a spreader bar instead of a clamp. Also, the black caps come off if you need to wash the glue off. Might even be replaceable. Keep ‘em coming.
@michaell7877
3 жыл бұрын
I have a bunch of KRE Bessey clamps in different sizes. Now, after the major purchases of what I needed, I buy at least one clamp a month. I have ended up with a nice collection. I continue to buy one a month from 12" up in incremental sizes. I love them. I wax the bars as soon as I get them too.
@NWGR
3 жыл бұрын
I just started my bessey kre collection as well, and that's how you do it; over time and not all at once. Instead of one, I spring for a couple a month since I prefer buying in pairs. The collection grows decently fast. I wax the bars too.
@interceptor7905
2 жыл бұрын
What wax do u use?
@VCGConstruction
3 жыл бұрын
Thanks TRZ, the game has changed! 👍🏻
@ToolReviewZone
3 жыл бұрын
Definitely brother 👊
@bluemantom77
3 жыл бұрын
@@ToolReviewZone I remember using pipe clamps for wood talking 31 years ago
@gradysmith2819
Жыл бұрын
to unloosen the bolt would be to tighten it. enjoyed your video. 😀
@AntonioClaudioMichael
3 жыл бұрын
You rock brother I can totally use these clamps will grab some tomorrow oh man that is nice I have a bunch of Jorgensen clamps @ToolReviewZone
@jeffalan6339
Жыл бұрын
I love it the in your face statements, a true professional. I know cheap tools as a finish carpenter, started off with black and decker, the circular saw was under powered and could not cut a straight line no matter, kicked back even. the drills didn't even last a year. I bought DeWalt the saw is far and away better, still own it nealry 25 years later. like optics and audio you get what you pay for. Milwaukee, Makita and Bosch are for the pros, Hilti and Festool are for the experts
@chaddoyle6911
3 жыл бұрын
Thank you for the video. Two additional things that I do with my clamps is to reverse the bottom jaw and use it to push out like a reverse clamp, and also to stretch things out such as stretching out bandsaw tires.
@BinleyClan
3 жыл бұрын
A couple wing nuts would be nice for the coupler bolts
@BinleyClan
3 жыл бұрын
I wax my clamps with minwax to make glue removal easier.
@CB71SS
2 жыл бұрын
Just bought a set of six from Rockler which were on sale. Haven't had a chance to use them yet but look forward to it. Fixing to order the body extender as I have had to jury rig a couple of clamps together before and it was a hassle to do and didn't always turn out like I needed it to. Very informative video, thanks.
@unclepewter4161
3 жыл бұрын
Unloosen means to tighten since it’s a double negative lol
@pepperman9
2 жыл бұрын
I love the Bessey clamps. A few weeks ago I found a 4pack on sale for $199, then of course last night I found a 6 pack for $189, as well as a free shipping coupon, so you know I HAD to buy them. I haven't even used the ones I bought last month. By far the very best clamps out there.
@P010010010100101
3 жыл бұрын
There's a spot for a hex key on the back of the handle. If you need a little more clamping pressure, or if you're like me and have wrist issues, you can just take a hex key and crank down. My Bora clamps don't have that. 😑
@BradsWorkbench
3 жыл бұрын
Too expensive for me but I have done something similar with pipe clamp couplings in the past
@ToolReviewZone
3 жыл бұрын
That's what I've been using, but thecan be a pain sometimes. Much happier with these brother 👊
@BradsWorkbench
3 жыл бұрын
@@ToolReviewZone oh no doubt. Ive always wanted some nicer parallel clamps. I just cant bring myself to drop that kind of coin on them
@paulshelley3770
3 жыл бұрын
LMAO.... When you said manute, my caption said ( my nude ) 🤣. I was eyeballing these at home Depot I wish I could throw a few hundred bucks for a few of these clams they're a tad pricey. $55 For one 50 "
@sinisterdesign
3 жыл бұрын
I have a 48" DeWalt parallel clamp that is very similar in design and construction. It's heavy as hell, but it works amazingly well for heavy-duty jobs!
@njbaquatics4827
3 жыл бұрын
There is no doubt about it they are fantastic cramps but they’re so dam expensive I looked into kitting out the shop with a set it was nearly $3000 just can’t justify it the Irwin ones are also very good and a little bit cheaper so I ended up going down that road don’t get me wrong they’re not as good as the Bessie But they’re very good more pocket friendly alternative
@ToolReviewZone
3 жыл бұрын
Thanks for the comment and feedback Nathan!
@corin164
2 жыл бұрын
These and other similar clamps are over-priced and not worth the cost. Pipe clamps are all that is needed in 99% of the glue-ups involving the glue-ups of several boards. These clamps will only be wall decorations and dust collectors. Don't waste your money on them.
@GodlessDad
2 жыл бұрын
Unloosen=tighten.
@mattbortz10
2 жыл бұрын
A guy who chews tobacco, is someone you can always trust. But, you always have to give them the respect they deserve, because someone who chews tobacco, does not take any shit. Take it from someone who also chews.
@AB-nu5we
3 жыл бұрын
Bessy clamps. Amen brother. I've got a bunch of 'em. Have two 60 inchers coupled together for very long outdoor storage project as I write. Spot on review.
@ToolReviewZone
3 жыл бұрын
Thanks A B!!!!!
@danielcookeb90
3 жыл бұрын
"You just unloosen them" love it!!!! I just Undo them to put them together and Loosen them to join them up!!🤣🤣🤣🤣😂🤣 Real Naaaas like!
@Rich32262
Жыл бұрын
I have these and Jets. I got the Jets on sale years ago and haven't seen a decent sale since. I think these are great clamps and compared to the price of Jets, I don't think the Jets are worth another $30.
@kellanaldous7092
3 жыл бұрын
I've wanted these for years but I didn't know they could do that. Way cool
@MarkL71
9 ай бұрын
Since I discovered bessey they're the only clamps I use. I sold or gave away everything else non-bessey.
@AntonioClaudioMichael
3 жыл бұрын
Oh that is new you can attach more then 1 bar together and extend the Clamps that is bad to the bone amazing Clint @ToolReviewZone
@ToolReviewZone
3 жыл бұрын
Definitely cool brother 👊👊👊
@kperellie
3 жыл бұрын
Besides having many clamps of all types and sizes, including several of these, which btw can sometimes be annoying to slide and release, and not to mention how stupid expensive they are, I seem to levitate mostly to my Pony pipe clamps of both 1/2" and 3/4" Exceptionally easy to use and strong, and will last for generations for a helluva lot less money.
@josephmaas4538
3 жыл бұрын
also if you thread both ends , you can use a black iron coupler also extend them also
@kperellie
3 жыл бұрын
@@josephmaas4538 Yes!
@gmamagillmore4812
2 жыл бұрын
Gee ..... Don't ya hate it when you buy furniture, only to find out later that it was put together with lower cost clamps ?
@rnmike1569
3 жыл бұрын
Awesome! And, yes, not only are you a hero, but you are the wind beneath my wings!
@ToolReviewZone
3 жыл бұрын
Hahahahahaha, tha ks Mike 😆
@georgefoster8604
Жыл бұрын
Yeah looking for the website for these clamps, hell I can't even find the description
@joshhavens3450
3 жыл бұрын
You nailed it! Best clamps ever! I have never heard anyone complain about them except the price but I believe you get what you pay for!
@ToolReviewZone
3 жыл бұрын
Actually a little cheaper than larger trigger clamps. Thanks for the comment Josh👊
@fishizer
3 жыл бұрын
@@ToolReviewZone I was waiting to hear the price.
@ToolReviewZone
3 жыл бұрын
Link in description
@fishizer
3 жыл бұрын
@@ToolReviewZone I did notice that after. Thank you
@deborahrouchon7740
3 жыл бұрын
I just received my two 31" that have been on backorder. Like EVERYTHING! That's why I'm watching these videos; I don't want to miss a trick. I'm sure I'm going to love them too!
@ToolReviewZone
3 жыл бұрын
Awesome! They are awesome clamps Deborah!!!
@kennedymcgovern5413
Жыл бұрын
Man, you can't hide money. These clamps seem well worth what they cost. And brother, I am a graduate of the "buy once cry once" school of buying shit. I learned the hard way, during my younger years and so every power tool I have, here in my 50s, is black and yellow. But DeWalt tool boxes? When it comes to something that sits against a wall and is only responsible for having drawers slide in and out...I have to admit...my versions of those read "Husky." The only way my toolboxes will ever be black and yellow is if I paint them (which...aint out of the realm...). We all reach the point where we have DeWalt tools. But brother, when you reach the point where you have them in DeWalt tool BOXES...that's country club redneck shit right there. I just ain't playin' on your level, Clint. Haha...the clamps look good. I may buy those. But when it comes to bigger stuff...I may have to send you a completed loan application!
@organize1979
2 жыл бұрын
It's 70something degrees here in CA right now...i'm enjoying this very informative video but it's making me feel COLD! Love those Besseys...they're the besteys.
@ToolReviewZone
2 жыл бұрын
Haha, thanks for the comment Candice 👊🤣
@Ozzzy506
2 жыл бұрын
i think these are the best clamps made yet. if you overlook prizes
@kevinsmith3534
2 жыл бұрын
🤣🤣🤣🤣🤣🙌🏾 Awesome Video Hilariousssss. Pretty Dope Clips 👌🏾
@ToolReviewZone
2 жыл бұрын
Haha, thanks Kevin 👊👊👊
@bluemantom77
3 жыл бұрын
Thanks for the heads up on this wonderful product I'm going to have to get me a couple
@mattbolden3539
2 жыл бұрын
I just bought 2 sets from Rockler and they were my first parallel clamps also first bessey clamps and I was impressed. I'm building a kitchen table so I bought the extenders that same purpose and it really helped me out but I flipped the ends where the longer part was hanging down off both ends of my work surface to help keep my clamps and table top from accidentally falling like they did with bar clamps. Plus it give you a little extra clamping room. It's something that helped me anyways.
@tensazero
3 жыл бұрын
Who the heck cares about the clamps? I'm clicking the LIKE button just for the shine in Clint's eyes. LOL The video quality is so good now.
@ToolReviewZone
3 жыл бұрын
Hahaha, the shine is all natural tensazero hahahaha. I updated camera this week....again bro. First vjdeobi used it on, so really REALLY appreciate the comment brother 👊
@lorrainebayford177
2 жыл бұрын
Yes just started collecting them You forgot to mension the Allan key hole in the end of the handle.
@AntonioClaudioMichael
3 жыл бұрын
Glad ya got it fixed Clint Bro @ToolReviewZone
@ToolReviewZone
3 жыл бұрын
Only 2 hours later lol
@AntonioClaudioMichael
3 жыл бұрын
@@ToolReviewZone it happens brother just life bro when it gives ya lemons make lemonade and mix it with Whiskey lmfao
@forthelovetech7387
3 жыл бұрын
Nice video! Just bought 4 of them I now feel like I made the right choice!
@ToolReviewZone
3 жыл бұрын
Thanks Tech! Yeah buddy, definitely made the right choice 👊👊👊
@MrCubflyer
3 ай бұрын
got them been using them for many years but thanks for the entertainment
@AntonioClaudioMichael
3 жыл бұрын
Beautiful Bessey Clamps Bro @ToolReviewZone
@buildahousewithlaserwoodcu3208
3 жыл бұрын
Hello
@snowgorilla9789
3 жыл бұрын
They make the best bar clamps for steel so a little finesse for wood and TaDa
@MrCubflyer
3 ай бұрын
Wish they were not made in China but other than that they are good.
@BinleyClan
3 жыл бұрын
Heck yeah, time to mill your own lumber!
@ToolReviewZone
3 жыл бұрын
Yeah buddy 👊
@delliott777
3 жыл бұрын
Love your reviews. Always fun and informative
@ToolReviewZone
3 жыл бұрын
Thanks brother 👊
@duncanabbot8352
3 жыл бұрын
Bessey have also got the vario version (KREV) where the head stop moves as well as the clamping end. Did you consider buying that model ?
@ToolReviewZone
3 жыл бұрын
If it's Bessey, I would recommend it. Never had an issue with them
@bobbystaats1846
3 жыл бұрын
Man your to much love your videos 💥💥💥 missed the makita gnome 😂😂😂
@ToolReviewZone
3 жыл бұрын
Hahaha, thanks Bobby. Don't worry bro, that pesky Makita Gnome is always lurking around somewhere 😐
@jefffink8405
Жыл бұрын
I have 8 of the 52" and 8 of the 24". I definitely have to pick up some of those joining plates.
@sweat319
3 жыл бұрын
Thanks Tool 🔧 review for your videos and information. I learned alots about clamps
@ToolReviewZone
3 жыл бұрын
Awesome and thanks for the comment Sweat!!!!!
@reaper060670
2 жыл бұрын
Love this video bro.. How much are these Bessy Clamps?? They look expensive to me but from what u say they will be worth the outlay in the longterm? I bought me some clamps last week and they're ok but trash really. I need to ask about Pipe clamps?? Are they any good ?
@TylerHarney
3 жыл бұрын
Where do I buy a few more of those sliding T bracket things? What are those called?
@konamanstudio2447
3 жыл бұрын
🤙🏼🍻🍺👍🏻
@chipshot442
3 жыл бұрын
Great Review my brother. I love my Bessy Clamps, better than any other clamps and I own a ton of them.
@ToolReviewZone
3 жыл бұрын
Thanks for the feedback chipshot!!!!
@dscritter614
3 жыл бұрын
U ARE a hero.
@soeaire
2 жыл бұрын
I have had my bessy clamps for months now. I love them I have only 2 36" clamps but wish I spent the $35. ea. and gotten two more. I saw a similar clamy that was orange for much cheaper for a set of 4. Big mistake, they tighten at the tips moving the wood. I am going to have to bight the bullet and get two more Bessy clamps. Good video, thanks
@walterrider9600
3 жыл бұрын
thank you
@johnrice9121
3 жыл бұрын
I have bessey clamps but not the k body. I love them. You are my hero my brother 😁
@ToolReviewZone
3 жыл бұрын
Haha, and you mine brother 🤣
@jasonbabila6006
3 жыл бұрын
Everytime I go to the Depot I always see them Bessy clamps but never bothered to examine the longer ones up close, I may have to consider getting some of the longer ones and I do have a couple of the short ones. Smeeesh that like button. 👀👉🏽 👍🏽
@ToolReviewZone
3 жыл бұрын
I love them Jason. Definitely a game changer for me. Oh....and THANKS FOR THE SMEEESH JASON!!!!
@jasonbabila6006
3 жыл бұрын
That's real nasss like! 👏🏽💪🏽
@tedmcdonald3377
3 жыл бұрын
Damnit Clint, Bessey's my girl😂😛😍😂
@ToolReviewZone
3 жыл бұрын
Hahahaha 🤣🤣🤣
@jefscolnago
3 жыл бұрын
Yeah...and check out the VARIO. The head can move up and down as well as reverse.
@bobd5119
3 жыл бұрын
I have four Bessey clamps. My only problem with them is that they are so pretty I hate to use them for fear of gunking them with glue. Thanks for the info on the extenders. I didn't know about them.
@dantheman9395
3 жыл бұрын
I hope they can hold it together for you. Lol 👊
@ToolReviewZone
3 жыл бұрын
Hahaha 🤣🤣🤣
@toolnerd
3 жыл бұрын
Done deal, more money leaving my pocket today! Thanks for the video!
@ToolReviewZone
3 жыл бұрын
Hahaha, sorry Nerd lol
@toolnerd
3 жыл бұрын
@@ToolReviewZone it’s all good, it’s raining good tool deals this year!
@amoscardoza5253
3 жыл бұрын
Yo TRZ!
@ToolReviewZone
3 жыл бұрын
Haha, AMOS!!!!!!
@amoscardoza5253
3 жыл бұрын
I suggest not keeping your cash in the Milwaukee fuel bag that's up in that loft. You should put it in a Hart bag. I'm betting with all those nice tools you have, they will think about stealing the Hart bag last.
@ToolReviewZone
3 жыл бұрын
Lol, I keep my money in the wife's purse bro hahaha
@konamanstudio2447
3 жыл бұрын
😆☁️😊💭
@amoscardoza5253
3 жыл бұрын
@@ToolReviewZone i got a recipe saw attachment for you to try. It's called the"Mixkwik". You put spraying cans ( and other cans) in it and it acts as a spray can shaker. Just seen it on Amazon whilst looking for a recip scraper.
@renoyin2848
3 жыл бұрын
I prefer PONY
@jameskelley6517
3 жыл бұрын
I have over 50 Bessey clamps love them Tv
@ToolReviewZone
3 жыл бұрын
Dayuuummmm
@moisesrobles7884
3 жыл бұрын
To much red bull is making you go cu cu but im still smashing my like botton kata kaboooooooooooooom to your videos
@couz10
Жыл бұрын
Thanks!
@henryvaneyk3769
3 жыл бұрын
They are like permanently out of stock here where I live.
@frankfinch9404
3 жыл бұрын
I have (2) 50" and (2) 24". I find them hard to adjust. They don't seem to slide the way your do. What the hell am I doing wrong?
@ToolReviewZone
3 жыл бұрын
Make sure you losses them up all the way. The tiger the know is turn, the harder it is. Also, only lift up half way on them
@dandeflavis7004
3 жыл бұрын
Bessey clamps are hands down the best clamps
@dwhitney1000
Жыл бұрын
Love my Bessey clamps , no downside at all.
@rickwashek478
3 жыл бұрын
Niiice like
@ToolReviewZone
3 жыл бұрын
Hahaha👊👊👊
@kirovel14
3 жыл бұрын
First
@ToolReviewZone
3 жыл бұрын
That was quick 😲
@shiitbyrd9869
3 жыл бұрын
When you Unloosen the nuts they should get tighter.
@notajp
3 жыл бұрын
Got the Jorgensen version of those. Really like them! Virtually identical design to these, but cheaper.
Пікірлер: 136