My Question how much you spent on that drone I lost my 260£ one it went somewhere and I think someone found and like stole :(
@TRONCATFPV
2 жыл бұрын
This drone cost $200 to build 😉 I’ll have a full build guide coming out soon 👍
@Polar-io4tx
2 жыл бұрын
how do you know what protocol the vtx is using. and what the receiver mode is?
@Maximolotov-g9f
4 ай бұрын
How do you find out what hardware you have on your FPV if you have not built it and you have no diagram showing how video receiver connected to flight controller to choose the right options in Ports menu in beta flight please ? Also how do you find out and get same software for receiver and transmitter for binding radio master tx 12 ? Thanks.
@viniciusmaiasilveira616
6 ай бұрын
anybody has the link to the video he said about how to hook up your controller to your receiver?
@akbradley01
Жыл бұрын
I just flashed 4.4.2 on my iFlight Nazgul 6d, and my Gyro disappeared! Now what?
@ArsenRadik
10 ай бұрын
I built the 200$ budget build drone and I don't know what motor protocol to use for it? could i get some help
@TRONCATFPV
10 ай бұрын
Dshot300 should work good 👍
@elsonab4283
8 ай бұрын
I love it it's simple and easy to follow. Thank you so much for sharing your knowledge 🙏 . I appreciate you.
@Sovereign_54
Жыл бұрын
How do I know which protocol my VTX is running?
@Mazekill
Жыл бұрын
hey i built this and when i plug it in it lights up but no sound it dfoesnt beep or anything
@thesaltyseadog6054
Жыл бұрын
" wicked drastically" a fellow New Englander I see
@ministucker
Жыл бұрын
Hey I have build my second drone with elrs happy model 2.4 receiver and is bind to my elrs module. Everything is fine but when I go to betaflight it won’t show the roll, pitch, etc… moving when I move it on my controller. Is bind and everything but won’t do anything. My first drone works flawless but this second one I can get it in the air. I have a TX16s radio btw. Help me
@TRONCATFPV
Жыл бұрын
make sure you have the "CRSF" protocol selected in the receiver tab. Also make sure you have the right UART selected for "Serial_RX" selected in the ports tab 👍
@gushoffman2978
2 жыл бұрын
If I am going to build a fpv drone what brand of goggles would you recommend?
@scottv5745
11 ай бұрын
Is this on the 2022 budget build? I’m debating building it as my first 5 inch quad
@TRONCATFPV
11 ай бұрын
Just posted a 2023 budget build 😉
@savvyone2737
Жыл бұрын
Great video. I have the same tmotor stack and am currently at this phase in my build. Very helpful
@kapsola2710
Жыл бұрын
Do you sell, I would like to buy one
@CristobalHernandez
Жыл бұрын
Link does not have VTX tables anymore
@geri4781
Жыл бұрын
you found some? i also need help here
@UnfairFrame653
2 жыл бұрын
nice build and i learned something new
@carlotv1212
Жыл бұрын
I’m new to fpv man so I think for me and anybody else it would be good to not leave out the little details like telling people they have to download all the necessary drivers off betaflight so I don’t have to spend an hour searching and watching videos on why my betaflight throws that failed to open port error.
@TRONCATFPV
Жыл бұрын
The only time I've run into the “Failed to open serial port” error its due to using a USB cable that isn't meant for data transfer. Try swapping your USB cable. Any driver you need to install may be specific to your flight controller or even computer. I haven't had to install any drivers to connect to any flight controllers on any of my computers. ever.
@bladekindblacksmith9909
Жыл бұрын
What did you do? I'm having the exact same issue with my serial port.
@carlotv1212
Жыл бұрын
@@TRONCATFPV I am using a normal type C cable and when I plug it in to my computer from the drone it detects the Stack on Betaflight software but it does not work when I hit "flash firmware" do you think this is because I am using a regular C cable ?
@wisider
2 жыл бұрын
Love your videos, man. Thnx for sharing 😄🤜🤛
@carlotv1212
Жыл бұрын
Everything works up until I hit flash firmware. I get a message saying “Failed to open serial port” my computer detects the stack when I plug it in so I don’t know what the issue could be
@carlotv1212
Жыл бұрын
After I open betaflight in github do I fork it ? If so which file do I click to download Betaflight.
@carlotv1212
Жыл бұрын
Please for the love of god make a video on how to set it up on the Speedy bee app.
@carlotv1212
Жыл бұрын
Can you please make a video on how to set up our Jumper remote or transmitter with Velocidrone
@TRONCATFPV
Жыл бұрын
make sure you're using a data transfer USB cable and select the "joystick" option once plugged in. You should be able to set it up all through velocidrone.
Пікірлер: 32