This video was a huge help. I've never built a quadcopter before now, but I was able to put this video in one screen, while using it to setup my quadcopter in betaflight. Very easy to follow, and the explanations make sense, even to a complete rookie like me. Thanks a lot for making this video. I had no local assistance available, so this was truly invaluable.
@steve-ofpv101
7 жыл бұрын
Thanks man! I have done it a few times but still watch these videos to kind of just keep it in repetition.
@CTKix
7 жыл бұрын
Thanx Justin! Many don't do these videos because "everyone else has". I've picked up things from you, Joshua Bardwell and Rotor Riot simply because everyone has their own way of doing things. I think you just saved me tons of headaches on my Xracer X1! Wanted to fly indoors, but was pulling my hair out!
@aleksanderpors9827
6 жыл бұрын
The part I was most interested in was in the beginning where you told how to bind a transmitter to the reciever, had been lookin' for it all day!
@waynespindle
6 жыл бұрын
Thanks man for helping out the new guys like me... Much appreciated!!!
@josepheustaquio5544
6 жыл бұрын
super appreciate the video and you taking the time... new X215 Pro should be here in 2 days... and I'll be going thru all this. Can't wait!!!
@txcowboyfpv7898
7 жыл бұрын
this is a great video bud, but the main problems that new people are having are the drives . How to install them. I learned the hard way and got lucky but the Ave Joe may screw his computer or install wrong drives. Wish someone would have a dummy proof video on how to install these drives. Betaflight is actually the easiest part , installing drives are probably the hardest task. You have a straight forward approach to teaching and I think every new guy or lady would benefit if you would make this toturial on drives.. Craig
@billscott190
6 жыл бұрын
Tnank God Im not the only one struggling with the drivers. I've spent hours and hours watching the various videos and trying over and over again each step but keept hitting the wall. I've pinged the various Face Book goups and I geet IT speek and wouldn't know a serial port from a chicken waffle. Help guys !
@pablorossi25
6 жыл бұрын
I’m havein this prob it just says waiting for data so I am thinking I need to install the right drive and I haven’t got a clue which one😖
@lift_king
6 жыл бұрын
me to
@mikepiotrowski981
6 жыл бұрын
Any luck with the drivers. Having same issue.
@MaddMaxx_MaddMaxx
5 жыл бұрын
Thanks so much for the video man! I now have more confidence with Betaflight!
@TMacFPV
6 жыл бұрын
Thanks Justin! Helped tremendously for a BetaFlight newbie.
@caljohnson4619
7 жыл бұрын
Betaflight for Dummies...that's me! :) Thank you, Justin, for another awesome video. You're the man!
@dronecamps
7 жыл бұрын
Haha. I was hoping someone would catch the humor here. Learning to build quads for me was very hourly intensive. I hope to speed up that process for other people.
@peglegfpv6365
6 жыл бұрын
Hey man thanks this video worked out for me. Where I love no one works on these things and totally got my stuff flying!!!! You rock brother!!!!
@charliedoubl
7 жыл бұрын
oh my gosh!!! this is the video I've been looking for! thank you so much for putting in the time to do this, i really appreciate it sooo much! thank you!
@crimsonfancy
7 жыл бұрын
exactly what I needed. Just got my Fuuton in yesterday. Thanks a bunch!
@tonygeddes9558
7 жыл бұрын
Many thanks for this video, Justin. This will help me enormously, us noobs need all the help we can get!
@FloridaWildlife
4 жыл бұрын
I learned something today!! and Bardwell makes everything confusing!
@goballistik1
7 жыл бұрын
Congratulations on reaching the rad 70000 subscribers Justin! Good things come to those who are diligent and rightous. Love the vids and all the handy dandy advice and wisdom. Thank you very much. Keep rockin' it. See you in the sky! STONEWULFF FPV
@Heffie01
7 жыл бұрын
Just built my first quad from scratch using a Matek F405 board. This tutorial was invaluable to getting my quad flying and controller configured for flight. Thanks :)
@Demonic_Turbo
7 жыл бұрын
Thanks to your video I have been able to get my wizard220s ARF ready to fly. Thank you good sir!!! Thank you so much! WOOT FOR NOOBS! (me)
@dronecamps
7 жыл бұрын
You're welcome Alex. Comments like that make my day. Thank you for letting me know. Keep me posted on how it flies.
@corybesson8000
6 жыл бұрын
Big help you are explaining how BF works when setting up a quad . I watch all your videos and appreciate all the info you give us . Keep up the good work . Thanks again Justin
@TheGaffanon
7 жыл бұрын
This is awesome thank you you Justin one of the things I like about your videos is you have not assumed we have all this knowledge already you remember what it's like to just start out.
@allennickles3970
6 жыл бұрын
Highly appreciated that u took the time to make this video...Two 👈👉 ..up bro!
@garycross5160
5 жыл бұрын
Great video for 1st timers. Thx for the great info.
@knaggs71
5 жыл бұрын
Very good job .... very easy to understand.... Thanks 🙏🏼
@the.piledriver6698
7 жыл бұрын
Finally I get it, Thank you so much for making this video, This is by far the BEST beginners BetaFlight tutorial
@linoramirez9452
7 жыл бұрын
Thank you for taking the time to make this video, it was very helpful.
@dronecamps
7 жыл бұрын
You're welcome Lino
@kalsumagui
7 жыл бұрын
Accidentally reset the DYS F4 Pro FC on my first build. This helped! Thanks!
@GroundControlRC
7 жыл бұрын
Great video for people new to BetaFlight. Keep up the great work and Happy Flying!
@k9frederic535
7 жыл бұрын
You make my day! my quad is reacting to my command. Your video should be on each quad site.
@Loodachris253
7 жыл бұрын
Wow thank you for this video it helped out so much!!
@jacobstube88
6 жыл бұрын
Best video I have found for Bataflight 101, thanks!
@graywoulf
7 жыл бұрын
You have done an outstanding job here!!! Thank you so much for this video. I will use this video as a reference standard as long as it takes me to learn Betaflight.
@garysherman7396
4 жыл бұрын
i put betaflight on my chromebook and it works like a charm no driver install just installed in and plugged my quad in
@stevensbox9625
5 жыл бұрын
Dude. I was sooo lost until I watched this video and walked to the steps. I did the most stupidest thing; confused the FS button on my GEPRC Mark3 with the actual VTX button & could not bind to my FrSky X Lite Pro. Thought it was broken & bought 2 more Receivers, the Q X7. Its been a week long nightmare. But thanks to you, I'm on track. Just can't figure out how to get the receiver to work with Liftoff.
@pspicer777
6 жыл бұрын
Thank you very much. Excellent tutorial.
@tbcreative3703
6 жыл бұрын
Best tutorial on KZitem much thx man
@colinmaughn7073
5 жыл бұрын
Thanks drone camps now learn to build my first quad
@18Blueflyer
7 жыл бұрын
OK, got it to recognize the board and I will continue thanks so much I'll keep you posted maybe even post a video.
@scarfacefpv7822
6 жыл бұрын
Great how to video. This helped me alot . Thank you
@jaybreezin2391
6 жыл бұрын
Got every thing working thank you for the help. great video
@timbenham516
5 жыл бұрын
Thankyou so much kind sir great video for a beginner like me!
@snwvolcom
7 жыл бұрын
Thanks Justin for the great video!
@matrixcoder87
7 жыл бұрын
Omg I'm so new to this and was lost with setup untill I found this great video. Thank you do much. Great work
@unclebuck5957
7 жыл бұрын
Awesome video Being new to the hobby. I can set up my drone Thanks for all the help
@dronecamps
7 жыл бұрын
You're welcome Rob. Thanks for tuning in!
@xlandscaper
6 жыл бұрын
Thank you for the video! Takes the guesswork out of it for us newbies
@pkeaton1
6 жыл бұрын
Big Thanks! Great video. Very helpful.
@corycanfield545
7 жыл бұрын
thank you so much for the video I appreciate you taken the time to go over the steps an making sure we can see what your talking about you nailed it tons of others have tried an do ok but just dont get it an you did thanks the only thing keepin me from flyin is chargin batteries
@tiaarredondo2755
4 жыл бұрын
Let me begin with, as far as my knowledge of drones and flying and RC's and all that goes with it,.. I have no Idea whatsoever what Im doing, how to do it, or if Im even doing anything! I just liked the thing and one day, after two years of going back and forth over getting this drone or not, I finally stepped up, Soon as I bought it, I immediately hit cancel, but the purchase went through regardless; and because I tried to cancel the order, even though I paid for a 2 day delivery, took a month for the drone to arrive. Finally, on Thursday, last week I got it! I spent that whole day boggled as to why I couldn't get in the air. When my girlfriend suggested that I might have the wings placed incorrectly, I thought she was joking, all the wings looked identical. But after she showed me several videos of my bad wing placement, took her advice and changed my wings, and it flew!. Goggles worked too, I'm on my way! I got the drone in the air, not for very long and not very stable either, so I watched more videos hoping to gain some knowledge. On KZitem I heard many talking about this CLEAR FLIGHT website and another one BETA FLIGHT. Im interested, I go to the web site plug in my drone and I hit something;... Don't know what and Don't know how, but now the drone won't respond, just incessantly beebs! It doesn't register on my Fs-I6; and on both of those web sites now, it reeds Im Dis Armed! and in a fail safe mode. I have ZERO idea what I did! I called a drone shop, 100 bucks to diagnosis, I just spent $400 getting the drone! I think that kinda bites but I really wanna get back in the air, Can anyone help me out? Again I have the Arris 250 and a FlySky Fsi6 radio, How do I get them to talk again and Yes; I was given a bind unit; but I have no Idea what to insert it in to bind my radio! Thank you for your time, I've been wasting the past 11 of mine trying to get back in the air, with no luck, .UGH!! Thank you in advance!
@manirubio
7 жыл бұрын
What a great video!! You answered all of my questions. Thanks
@dronecamps
7 жыл бұрын
Thanks Mrubio!
@manamanafpv1176
5 жыл бұрын
I agree with the comment under mine, and i as well found this video very informative, thanks Justin
@philipstrom6966
5 жыл бұрын
Great job on the step by step info 😁👌 Thanks
@h2o-fpv623
5 жыл бұрын
Them I'm glad to got u explaining this betaflight u r the best on this business my personal opinion.
@larrylopez721
7 жыл бұрын
Excellent video!
@uneekpcs
5 жыл бұрын
Thanks for taking time to do the vid Nicely explained
@sarunasmykolaitis2112
7 жыл бұрын
super video helps for beginers like me :) and make more videos your are Awesome to explain everything. thanks
@gbro8822
7 жыл бұрын
Wow, this was great. Could you please do one for cleanflight 2.0. I flashed a Naze Rev6 from 1.2.3 to 2.0 and all lost everything. The stock setting look very high for beginners like me. It's OK if you don't, I know you are very busy. I was able to get the leds back working. lol. Thank you for all your time you put into your videos.
@redwine3437
5 жыл бұрын
Looks like a good video. Thanks
@h2o-fpv623
5 жыл бұрын
Oh yes thank u I finish my drone today so I'm very happy after waiting for all the parts next one I'll get it ready to fly lol maybe...
@wreckingball8881
4 жыл бұрын
I could kiss you! Finally someone that speaks English and not code
@tonil6604
7 жыл бұрын
thanks Justin! would help to get me in the air and doing a good setup! go on love da channel
@k4jsteward
5 жыл бұрын
Thanks for the help. I'll give it a try
@k4jsteward
5 жыл бұрын
I keep getting this message "boot loader not responding" message when I try to update the firmware. Everything else works fine up to that point. Emax Hawk 5
@r3verseb4ckfl1p
7 жыл бұрын
Great video, thanks a lot for sharing.
@tony1954
7 жыл бұрын
Thanks. I reset all settings back to default, and then nothing worked. This video helped me out a lot.
@hackerzgaming6173
4 жыл бұрын
I needed this.. thank you!
@hpiproceed97pcp20
6 жыл бұрын
This is hands down the best video on here thank you so much for your help greatly appreciated
@chrispearson7303
7 жыл бұрын
Thanks Justin,another great video,still waiting for my taranis so I can start checking my build.Don't know if it will fly or whether I can fly it.Will find out.
@WilliamAlexander
7 жыл бұрын
I like the camera platform drones
@HOPARK-e8w
7 жыл бұрын
Nice video for a self-learner like me. Just a question here. I am still very confusing and wonder why Horizon mode is bound to Aux1, while the other modes(Horizon & Air) are controlled by Aux2.....
@russellschwausch2437
7 жыл бұрын
I have exactly the same question! It is at 17:20 in the video. But when you change the switch, the little indicator bar moves for both Angle (Aux 2) & Horizon (Aux 1) modes??? How is that possible?
@joachimhofer3383
7 жыл бұрын
The perfect vid for me! Thank you very much Justin
@nutsidea
5 жыл бұрын
Cannot connect to Betaflight even after you loaded the driver onto your mac? It could very well be the USB cable you are using is a power charging ONLY cable. Find one with DATA transfer enabled. It should connect nicely. Most USB cables that came with your Android phone will work because it allows you to connect to your comp. Took me half a day to figure this out. Hope that helps.
@hukchone4521
5 жыл бұрын
Thank you very much. I'm totally beginner and finally found how to set up by BETAFLIGHT. I will try . Thanks again. by the way I'm now flying in LEVEL mode. Want to try Horizon Mode. Can I set up in BETA FLIGHT ? I will try.
@Heiple2007
7 жыл бұрын
Extremely informative, nice work. Jeff
@mattfisher6042
5 жыл бұрын
Much needed info, thank you!!
@pcm2638
7 жыл бұрын
It would be great to also assist the Spektrum users. Missed the boat for a lot of people
@k4jsteward
5 жыл бұрын
Hi Justin, great videos thank you! Quick question, My emax hawk 5 won't throttle down all the way after a throttle up. Any ideas? Thanks again, Kevin
@dronecamps
5 жыл бұрын
Turn off AIRMODE. Then turn OFF motor stop.
@CharlesTLam
7 жыл бұрын
Hey love your vids, you helped me out wih my first Betaflight and worked out great. Question, I just purchased a new Aurora 90 but I’m geting a 1 second delay with my sticks on Betaflight and of course in real world when trying to fly. Its impossible as you can imagine . What could be going on? I flashed update and have Frsky qx7 bound to Aurora 90..but never had delay like this...it was like this out of the box...thanks
@herihonda7366
6 жыл бұрын
thanks for the video. question: 1. just recently upgraded my FC to SP racing f3 acro 6 dof. but why my drone can not be stable and jump to the left if I give a trottle. if in angle mode my drone can hover but still shift to left slowly, what should i do, should i set PID or something wrong with the motor? 2. if i already messed up PID how to return it? 3. Can the transmitter flysky t6 communicate using sbus? thanks a lot, i like to watch your vidio, and sorry if there is one wrong word. heri from indonesia
@Fonseeker
Жыл бұрын
@Dronecamps I'm a noob setting up a cinelog20 dji rc 2 dji 03 PNP version from Geprc. My motor direction came opposite to this video, do you have any tips?
@DaytonaJim78
7 жыл бұрын
doing my first build as we speak thanks for this!
@Germanbattle83
6 жыл бұрын
Very very helpful, thank you very much.
@AldenDiazTV
5 жыл бұрын
Do you need to do this if you have dji system?
@rcsnapon2132
5 жыл бұрын
Awesome video
@carsonfeese8649
5 жыл бұрын
1: does setting up the arm and disarm apply same for the Flysky I6 with the eachine wizard 220 2: is the eachine wizard completely ready to fly out of the box.(besides charging the battery)
@QuiteCherryTube
7 жыл бұрын
Hi Justin, U using Mac, what USB driver are on ? :) I cannot connect ...
@rcpete7055
6 жыл бұрын
Betaflight and cleanflight configurator won't run properly on my laptop or tablet? I have downloaded all of the software and firmware updates.. any suggestions Please..?
@jasonhiner7686
7 жыл бұрын
I followed the video yet when I get to the radio portion my throttles don't read. my receiver shows it successfully bound. I am using a qx7 radio, frsky xm mini, on an I-flight ix2. I also have a cheerson cx117 that my PC doesn't recognize and won't even show up when I connect to cleanflight. it's starting to become quite disheartening.
@raymundoalba6899
7 жыл бұрын
hey the video was very helpful. i have problem with my drone whenever i move the throttle up the drone stays on the ground and sometimes only two motors spin unless i change the direction.
@vhockada
6 жыл бұрын
If this video is for dummies and I still cannot figure out what’s going on with my beta and drone then what does that make me?
@dankehrig3419
5 жыл бұрын
I know this is an old video but I just hookes up my mobula7 to beta flight and all of a sudden it starts smoking!!!! Did I get a bad board? I've only flown like 6 times and wanted to change the tuning so I could get better at flying! I am new at the hobby except for a mavic but that's not really for sport! Anyway I am disabled and can't afford to pay out for new escs every 6 flights! Any help or advice if I did something Incorrect that knowledge would be helpful! Thanks and your channel rocks I always check your reviews before I buy stuff!
@mikeodell5915
4 жыл бұрын
Study time ...thank u
@18Blueflyer
7 жыл бұрын
Hi, thanks for all your wonderful videos. I made the mistake of attempting to use BETAFLIGHT before I watch this one. I was really stupid and selected UART1 trying to get something to work. And of course saved it. Do you have any idea of how I can fix this? I have the same board that you have any use in this video. Any help at all!!!!!!!! Many thanks Tom
@dronecamps
7 жыл бұрын
Tom, since you did that and saved it and disconnected now the FC doesn't see the USB port. Now you will need to refresh the FC board with a new fresh copy of the firmware. Then the USB will work again. But you will lose all your previous settings etc.
@18Blueflyer
7 жыл бұрын
Drone Camps RC thank you so very much I hope I can figure out how to do that. It is a brand-new RTF that is called the 90 GT from King Kong
@dronecamps
7 жыл бұрын
Find the flight controller manual for it online. Then locate the "BOOT" button or solder tabs. If it's a boot button just hold it down when you flash the flight controller in Betaflight. If it's two solder tabs they need a dab of solder to connect the two tabs. Then flash the firmware. Next use a "solder sucker" (found on Amazon.com for $5) and remove the solder. Then you will be able to re-connect to Betaflight.
@18Blueflyer
7 жыл бұрын
Drone Camps RC so it does have a boot button. So the flashing of the firmware would be done on beta flight? I apologize for my ignorance
@dronecamps
7 жыл бұрын
yes where it says "Firmware Flasher". Click that and select your flight controller firmware type. ( I can't remember which one it is) then you will need to do that process. Theres a few youtube videos on how to do it. This one covers it I believe.
@rileypalmer7550
6 жыл бұрын
I know this is a noob question, but is it possible to connect the Thunder QQ Super flight controller to betaflight?
@jasoncummings64
5 жыл бұрын
Hey Justin.. I'm with you until I hit firmware flasher.. yes.. first minute. Nothing shows up in my dropdown for my t.h. freestyle.. what am I missing?
@troyholio4997
6 жыл бұрын
really helpful video, but i have a question, my Leader 120's motors spins simultaneously even on "motor idle throttle 0" .. and i cant move "master" inside Motors tab".. And if i turn up throttle on TX motors 3 and 4 go up but motors 1 and 2 stays low.. thnks bro!
@grapeape780
7 жыл бұрын
thank you, got my motors spinning correctly.
@dronecamps
7 жыл бұрын
You're welcome !
@grahamjw75
7 жыл бұрын
My quad is a wizard x220 rtf and I upgraded to a frsky receiver for my QX7 and have been unsuccessful in getting betaflight to recognize my controller I've flown it before with the flysky remote it came with so do I need to reflash it? Or just change the settings? I just do not want to mess anything up
@scotthendrix13
7 жыл бұрын
I fly with a switch for air mode,is there any difference at all in acro mode and air mode?i have never really understood this...thnx
@ChristKrew-Rev1.8
6 жыл бұрын
Will the 2 in 1 Tablet 10.1" Screen Windows 10 Intel Atom Quad Core 2GB RAM Keyboard Pro work? Thank you for the video!
@gymzillaflores6335
7 жыл бұрын
Hey Drone Camps RC. I wondering if you could help me. I am no getting any detection of movement in betaflight. Quad connects but the 3D model will not move. Can you please help?
@ady7d77
4 жыл бұрын
which is better ardupilot or ros or betaflight, which is more stable?
@dustin4428
7 жыл бұрын
Might be a dumb question but I am new to this. I just got a jjpro p175 and a x4rsb I am trying to set it up on sbus. I have channels 5 6 and 7 on my taranis for my switches. And am running on channel 5 to the sbus port from the FC but every time I try and go under the reciver tab I am getting no input at all. I have set everything up like you have in this video. But still nothing please help.
Пікірлер: 332