🛒 BETAFPV LiteRadio 2 SE RDQ - bit.ly/2NteAmb BF - bit.ly/39RKrEw BG - bit.ly/2NtC7Dt PD - bit.ly/2KBbIT1 📺 Video on V1 - kzitem.info/news/bejne/0G5pym15o52IdKA 🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks! 👉 Old gear for sale here - bit.ly/AlbertGearFS 💲 Get the latest exclusive coupon codes (updated often) bit.ly/34SYiGn
@johnk8825
3 жыл бұрын
Good review. Your explanation makes more sense than reading the info on the BETAFPV site.
@Funcentric
3 жыл бұрын
Correct, you can bind multiple quads with this. I have the original Lite 2 and it's bound to 6 quads. Great as a first radio. It's still my only and primary. Thanks for your videos. I did watch the first one too. Much appreciated.
@AlbertKimTV
3 жыл бұрын
Thanks for sharing
@ChrisParayno
3 жыл бұрын
So if I got the Bayang version from the kit, am I only limited to the Bayang or do I have access to the other protocols?
@zoranbregovic3752
3 жыл бұрын
I had a problem with Lite 2 radio that throttle and pitch gimbals (pots) didn't work out of the box. So I wouldn't be buying this one until they upgrade to hall gimbals. For around $10-15 you can get a radio in a similar form from Jumper or RadioMaster with hall sensor gimbals.
@birdman316
3 жыл бұрын
sweet radio albert! i have mine from the "starter2" whoop kit and it feels nice and is precise as well! also my tyro79 came with the orange radio! NIICCEEE!!!
@ChrisParayno
3 жыл бұрын
How's the tyro? It looks intimidating compared to a tiny hawk.
@jlarson42
3 жыл бұрын
Great overview. Very informative. I bought opentx version for my granddaughter. Works well for her. This one is better. No need to calibrate in companion 👏. And not using those useless 2s 350mah lipos is a big plus. 👍🤓
@AlbertKimTV
3 жыл бұрын
Thanks for sharing!
@samuelevinti
3 жыл бұрын
hey I cannot setup open tx with it (same version you have I guess, with USB C port and no battery. I followed the procedure holding setup button and turning it on but it doesn't behave as they say. Any hint? Thanks!
@jlarson42
3 жыл бұрын
@@samuelevinti hi. You have the lite 2 SE ? That doesn't use opentx / opentx companion. Mine has micro USB, it's the original lite 2. The SE version has calibration instructions in the user manual. Otherwise "betafpv hobby" KZitem channel shows how. Much easier than the original lite 2.
@samuelevinti
3 жыл бұрын
@@jlarson42 thanks, my real issue is that none of my win10 machines are able to detect it, I believe it’s faulty and betafpv people are on holiday for two weeks, nice...
@jlarson42
3 жыл бұрын
@@samuelevinti watching the betaFPV video, they didn't have it plugged into the computer. They had the flight controller plugged in so you could see what the sticks were doing. There are stick commands in the lite 2 se that you use.
@uptimefpv
3 жыл бұрын
This seems like a much more future-proof option than the LiteRadio 1. Great Review as always!
@ValFPV
3 жыл бұрын
Future proof? One of the potentiometers on mine failed 1 month in, and the replacement betafpv sent weren't any better. I've now been through 3 broken potentiometers.
@GadgetLuv259
3 жыл бұрын
Nice! I preordered the radiomaster t8 pro yesterday, I wanted to wait to see a review but I couldn’t help myself 🤷🏽♂️
@GadgetLuv259
3 жыл бұрын
@@olivierf.4931 it only just shipped yesterday. Preordered nearly 3 months ago
@troyschultzrc5286
3 жыл бұрын
I should of waited 3 weeks I got the older model!!! Oh well it works good for me.
@konstantinbecker6757
3 жыл бұрын
Awesome review, mine came yesterday
@MCsCreations
3 жыл бұрын
Fantastic review, Albert!!! 😃 Well... I honestly would like it more if it was still OpenTX, but... We can't have everything, right? 😕 Anyway, stay safe there! 🖖😊
@Lucas1Apple12
3 жыл бұрын
Mine doesnt flash red at all before the blue :( so I cant seem to change them and connect it with the beta65s
@tonysofla
2 жыл бұрын
Is it compatible with Frsky R-XSR Receiver in my cinelog35 drone? I could use a small travel remote. I wish someone made a website with all standards and cross-refence. like is D16 is the same XSR or it's a sub category?
@AlbertKimTV
2 жыл бұрын
This radio uses the D8 and D16 protocols for the FrSky version. The R-XSR is a D16 receiver, so they will bind and work together. R-XSR is the model name. D16 is the protocol it speaks and what it will be compatible with. Just ask me questions, I know a lot about all these different radios and protocols. I have hundreds of videos you can watch that will talk about these in various amounts of detail.
@mryipicayey
3 жыл бұрын
I cant bid it with meteor 75 little, I put in d8 mode and hit bind button later but no way , in my previous little radio2 , they bind automatically once was in d8 mode , is something else I need to do ?
@AlbertKimTV
3 жыл бұрын
Contact BETAFPV support. Some of these were sent out with corrupted firmware. You'll need them to send you the firmware and update process.
@russwishtart
3 жыл бұрын
I have the old Literadio 2 which works well. I bought the SE and I had two big problems with it: 1. The battery would not charge over USB-C. I could charge the battery by connecting the small JST connector on the battery to 1s charger, but no matter what it will not charge over USB-C. 2. The SE will not bind to my NewBeeDrone HummingBird V1 BNF - PMB Edition whoop. The old Literadio 2 binds to it just fine, but the SE will not bind to it. This whoop is a Silverware FC, so I'm not sure if that has anything to do with the issue. That said, I have seen lots of comments on fb from people who cannot bind the SE to this specific whoop - in fact, nobody has reported successfully binding the SE to this HummingBird. I am not sure if this is a problem only with this whoop or with all Silverware FC's in general. I could probably live with the SE not binding to the Hummingbird whoop, but of course the fact that it will not charge over USB-C is a deal breaker, so I returned it. Tried to buy an old Literadio 2 but I can't find one anymore. Oh well!
@1975supermike
3 жыл бұрын
So which one is being sold with the beta fpv advanced kit ? This or old model ?
@tsubakisan1147
3 жыл бұрын
@Albert Kim How does the BETAFPV literadio 2 SE compare with the Radiomaster T8 pro? I'm considering one of these to play the Liftoff simulator. are the gimbals better on the T8 Pro? Thanks!
@AlbertKimTV
3 жыл бұрын
Get the T8 or T8 pro. Gimbals are much better on those and worth the extra money if you can afford it.
@erdianari
2 жыл бұрын
I have problem with current gimbal, is it possible to replace it with T-Lite gimbal?
@AlbertKimTV
2 жыл бұрын
No, those are not the correct size and voltage. The replacement gimbals are sold here... bit.ly/328GXOj
@PsychoticEwok
Жыл бұрын
Hi I just had a question about this controller, I'm looking to get into the fpv hobby and looking for a fairly cheap controller to use while playing simulators using an Xbox controller and started to get comfortable with it but I feel like it's holding me back from learning (been playing DLR and liftoff) is this controller a good option for my situation and will it be good enough for use with my first drone when I get one?
@AlbertKimTV
Жыл бұрын
Yes, this is good enough, however I recommend the LiteRadio 3 PRO with ELRS if you want to use it with real drones later. See my review here... kzitem.info/news/bejne/saJqu6SQqoBiaJg
@scottschaefer4230
3 жыл бұрын
Hi. I have the Eachine Novice 1 coming in a few days and am looking to upgrade the controller. Will this bind easily with the quad? I saw that it can bind with the RM T8, but requires moving and soldering a connection. Not what I'm looking for in my first fpv .
@AlbertKimTV
3 жыл бұрын
The Novice 1 has a Frsky D8 SPI receiver so it will work with this radio in D8 mode.
@mechanikoblatywacz2365
3 жыл бұрын
Nice! thanks for the info.
@marti9382
2 жыл бұрын
Hi! Nice video! Maybe it is a silly question but what do the 4 switches do? The one with SA written on it looks like an arm disarm, but what do sb, sd, sc do?
@AlbertKimTV
2 жыл бұрын
You can assign modes (functions) in Betaflight to make them do whatever you want. The SA switch is a two position because the arming channel (CH5) is just high or low only.
@chrismillersrcfamily
3 жыл бұрын
I like easy. 👍🏼
@user-yt7fq7rh7d
3 жыл бұрын
hey there...do you know if its compatible wtih DRL on XBOX???
@windwalker1183
3 жыл бұрын
Does it work with a simulator?
@AlbertKimTV
3 жыл бұрын
Yes
@owenk5926
3 жыл бұрын
Looks like one hell of an upgrade compared to the old one. lol
@MrDavidlight
3 жыл бұрын
hi Albert, you said that it will work on a simulator, but only on windows , right ? because i can't connect it to mac OS X... or is there any solution... for the SE.
@AlbertKimTV
3 жыл бұрын
I don't own any Apple products so don't know how to get it to work on a Mac
@dbillett1
3 жыл бұрын
trying to get this to bind to my mobula 6, any advice? Can't get it to bind. I tried binding by pressing the buttons, and bind through cli in betaflight. No joy.
@AlbertKimTV
3 жыл бұрын
Contact BETAFPV support and open a ticket. There is a batch of these floating around with some kind of firmware bug.
@dbillett1
3 жыл бұрын
@@AlbertKimTV okay thanks. I got it to bind to my F4 Hummingbird no problem. The Mobula6 is using Betaflight 3.5.7 while the Hummingbird is on 4.1.5, not sure if that could have anything to do with it.
@dbillett1
3 жыл бұрын
@@AlbertKimTV I opened the support ticket last night via email with BetaFPV. They sent me everything I needed to flash the transmitter. No problem binding any longer with the Mob6. Thanks for the heads up!
@SpencerRieu
2 жыл бұрын
@@dbillett1 I am having a really hard time getting this to bind to my mobula 6 and I also opened a support ticked but they have not helped me at all. Do you have a webpage or anything that helped?
@ChrisParayno
3 жыл бұрын
I got the Bayang version from a starter Kit I won. Does that mean I can still bind with the other frsky protocols d16/d8 or am I limited to only Bayang protocols.
@AlbertKimTV
3 жыл бұрын
Only Bayang
@ChrisParayno
3 жыл бұрын
@@AlbertKimTV oh shucks. Thanks!
@nealvondinklage4615
3 жыл бұрын
Hi Albert, have you ever had trouble connecting it to a computer for simulations? Ive tried mine on Mac and PC and neither are recognising it, is there a something im missing? Ive tried all suggestions online and none of them work
@AlbertKimTV
3 жыл бұрын
Could be a USB driver problem. When you plug it in, it should give you a notification that a USB Joystick has been plugged in. Do you get that? If not, the USB port on the PC or radio could be broken. Have you tried other PC's?
@nealvondinklage4615
3 жыл бұрын
@@AlbertKimTV thanks mate, turns out it works on PC's but no good on Mac's unfortunately
@MrZgBoy
3 жыл бұрын
Can I connect tyro79 with literadio2SE?
@AlbertKimTV
3 жыл бұрын
Yes, assuming yours has a D16 or D8 receiver.
@bridgeoverlay9337
3 жыл бұрын
Could you link a strap for the radio
@professorzim
3 жыл бұрын
LR2SE keeps beeping, how do I stop this?
@AlbertKimTV
3 жыл бұрын
Either the throttle isn't all the way down or one of the switches isn't in the correct default position. Consult the manual to set the switches to the correct default position.
@mattsterling2731
3 жыл бұрын
I'm trying to bind this with a tinyhawk freestyle 2 but it wont bind. any help would be appreciated
@AlbertKimTV
3 жыл бұрын
You got this from RDQ? I think others who bought this from RDQ are having the same problems. I think all you guys got the Bayang version by mistake. I'm still investigating.
@AlbertKimTV
3 жыл бұрын
I've just been informed that this is a firmware problem with a batch of these radios. You should contact BetaFPV support and they will help you update the radio so it will work.
@jannekotikangas156
3 жыл бұрын
@@AlbertKimTV Hi, this is good news as I managed to get into that impression by shuffling trough the internet. I don't have TH, but Mobula 6 HD and not been able to bind in either of 3 modes ( D8/16/16 ). At the moment I´m under impression that transmitter is running never firmware on the transmitter module than the "old" microwhoops. I submitted request earlier today, hopefully will get more information from betafpv soon :)
@mattsterling2731
3 жыл бұрын
Thanks for your help buddy 👍
@aviphysics
3 жыл бұрын
You can use it as a wireless trainer with a primary radio running OpenTX and a multi-module.
@AlbertKimTV
3 жыл бұрын
Easier way is to use the drone's FC and RX connected to the PC.
@aviphysics
3 жыл бұрын
@@AlbertKimTV I meant as a buddy box at the field. I got one for letting my daughter fly my planes when I drag her to the field with me. The plane is bound to my crossfire module and I can give control to the literadio bound to my multimodule
@jmillerfpv
2 жыл бұрын
You say that you did bind it with xm+ ? Some say it can’t. I hope it can because I ordered one. 🤞
@AlbertKimTV
2 жыл бұрын
Yes you can but you have to change the mode from D8 to D16 as outlined in the manual. Your XM+ receiver must also have the ACCST firmware and not the ACCESS firmware. This radio will not work with ACCESS firmware. Apparently many people don't read the manual then go online to claim the product is falsely advertised. I don't give much credit to anything online anymore.
@jmillerfpv
2 жыл бұрын
@@AlbertKimTV thank you
@martingru
3 жыл бұрын
Just bought this radio I wonder if it possible to put some better antena on it to get better reception im planning to use it with Tinyhawk 2 freestyle ,do you think reception will be an issue also will that bind ? tbh I'm new to fpv (I was 3d Heli guy some years ago) I've sold my spectrum radio and all stuff except charger and soldering iron :) there are many different protocols I hope those two work together out of the box. Thnx for reviews 👍
@AlbertKimTV
3 жыл бұрын
Reception won't be a problem if you fly in front of yourself and no more than 200m away.
@martingru
3 жыл бұрын
@@AlbertKimTV ah ok thnx for taking time for answering.
@martingru
3 жыл бұрын
@@AlbertKimTV one more question ,do this radio will bind with xm+ receivers I see those in many PNP models and cant find any answer for this anywhere? Tnx
@zagetex4776
3 жыл бұрын
Does this Radio work with a r-xsr reciever?
@AlbertKimTV
3 жыл бұрын
Yes, it should but your receiver may need a firmware update since this radio only works on the ACCST mode and not ACCESS mode.
@chriswoolley3643
3 жыл бұрын
New to fpv do you think this radio will work with a frsky r-xsr receiver?
@AlbertKimTV
3 жыл бұрын
It should in D16 mode but none of the telemetry features will work.
@chriswoolley3643
3 жыл бұрын
Sorry for all the questions, please explain what non of the telemetry features means? Will I be able fly my drone looking through googles all I need is basics? Thank you
@kydawg1684
3 жыл бұрын
Albert good stuff. Any way to Adjust trims for centering in Betaflight? Any idea how many models it will hold? If you have multiple models with different protocols....does it auto switch settings internal automatically (I think this is what you meant when you mentioned multiple models)?
@AlbertKimTV
3 жыл бұрын
There are no trim buttons but you can run the calibration sequence I mentioned in the video to do proper centering. You can bind up as many models as you want but it does not auto switch protocols. You have to switch manually.
@gl3615
3 жыл бұрын
I got the original literadio 2 and the gimbals don't work. Lots of dead zones. Disappointed to see that they are still using the same sensors. Cannot find a fix and customer service is virtually none.
@ernest_4104
3 жыл бұрын
Literadio SE2 or radiomaster tx12? For beginner.
@AlbertKimTV
3 жыл бұрын
Radiomaster TX12 is much better but also much more expensive. If you plan to stay in FPV for a long time, spend more money. If you're not sure, get the cheaper option.
@ernest_4104
3 жыл бұрын
@@AlbertKimTV thank you
@efrenmarinas6443
2 жыл бұрын
Just bought it for my simulator. but the problem is, it doesnt work on my android phone using freerider sim. And i also tried other simulators but unfortunately cant recognize my controller. Is this BETAFPV literadio 2 SE really works on android phone? . TIA
@AlbertKimTV
2 жыл бұрын
Potential sources of the problem... Phone doesn't support OTG. You're not using an OTG USB cable (regular cable doesn't work). The OTG cable is not compatible with the version of OTG your phone supports.
@jaehyuneum8597
3 жыл бұрын
how to connect pc?
@AlbertKimTV
3 жыл бұрын
Plug into the USB port and power it on. It will show up as a joystick device on Windows. I'm no sure how it works on Mac.
@divingfalconfpv4602
3 жыл бұрын
Did they upgrade the gimballs. I got 3 with huge dead center. Without raising dead center to 10 to 20 it drift roll and another yaw
@AlbertKimTV
3 жыл бұрын
Did you try to calibrate the gimbals?
@ValFPV
3 жыл бұрын
sad to see they're still using the same potentiometers that caused so many Issues for multiple users (including me). Should've put in better ones and make It $5 more expensive. (see video about the potentiometer/gimbal Issue on my channel)
@trevorimpulsebuyguy6398
3 жыл бұрын
It's not bad for the price but I would rather have the Jumper t-lite or radiomaster t8
@AlbertKimTV
3 жыл бұрын
You're not the target market for this. Whatever controller you have now is much better.
@trevorimpulsebuyguy6398
3 жыл бұрын
@@AlbertKimTV I know, I just really want that new Jumper tlite tx lol
@lukesworld2864
3 жыл бұрын
I just got one Thursday. Works well with DRL on my PC, but I can't get it to bind to my Mobula7. But I'm new to this and they both seem real simple to bind but it won't
@AlbertKimTV
3 жыл бұрын
Make sure you are binding it in the correct mode for the receiver. Look on the configuration page to see what mode the receiver is in and bind in that same mode on the radio.
@lukesworld2864
3 жыл бұрын
@@AlbertKimTV i set frsky d on that page and d8 on the transmitter
@anthonyechevarria5485
3 жыл бұрын
Is anyone having problems binding with emax AIO receivers? My tinyhawk s won’t bind to this SE model
@AlbertKimTV
3 жыл бұрын
Are you sure you have the FrSky version and not the Bayang version? Which store did you get yours at? I am able to bind with all the Tinyhawk models in D8 mode on mine.
@anthonyechevarria5485
3 жыл бұрын
I got the frsky version from RDQ. The box says frsky. I have the radio is D8 mode as well. The blue LEDon my tiny hawk s is solid in bind mode but the red one is consistently blinking slowly. And when I hit bind on the radio nothing happens, blue stays solid and red blinks. I’m going to fiddle with it a bit more when I get off of work.
@anthonyechevarria5485
3 жыл бұрын
I just realized my aux channel are still set for my radiomaster. That might be why I’m having issues.
@bigatchoum
3 жыл бұрын
Athough I love the form factor and the price accessibility of this product, I am very disappointed to see that they did not improve the gimbals as these potientiometers are crap. My Literadio 2 had deadband issues on throttle between 30 to 50% out of the box and started after 3 weeks some jitter on the roll axis as well. It is currently RMA at my local vendor and I have low expectations. My advice is to just wait for the Jumper T-Lite review with hall effect gimbals before making any move. Albert can you please show the signal sticks precision through the received tab of Betaflight configurator when you review the T-lite? And thanks for the great content!
@AlbertKimTV
3 жыл бұрын
Have you tried recalibrating the gimbals?
@bigatchoum
3 жыл бұрын
@@AlbertKimTV I tried for the throttle issue but it did not help. Reading other unhappy customer feedbacks on Reddit I tried opening the potentiometer and lifted the wiper to increase contact. It helped a lot, but unfortunately this did not last long. Haven't tried recalibrating for the roll issue thought. Thanks for the help Albert!
@mq_fpv
3 жыл бұрын
Head the same problem with the gimbals, but appearing only after a few hours of use. Showed problem to BetaFPV, they graciously did send replacement gimbals, BUT those started failing even faster than the original ones. The problem was dead zones in the potis, causing enormous control problems. No, calibrating through open tx did not help. Their potentiometers are absolute junk. Going by the disassembly shown in Albert's video, the gimbal set was not updated versus the 'old' lite radio, so the new one likely still has the same junk potis. Stay away from this!
@bestamerica
2 жыл бұрын
' is this R/C can use a pack of four AA batterys is R/C come with a receiver
@AlbertKimTV
2 жыл бұрын
No to AA batteries. There is an internal lipo inside. Does not come with receiver, you have to purchase separately.
@ZukiManDan
3 жыл бұрын
I agree I would rather have the T lite
@AlbertKimTV
3 жыл бұрын
As with most things in life, you'll get more when you spend more.
@TylerC2413
3 жыл бұрын
I bought this and it wouldnt bind to any of my quads :(
@AlbertKimTV
3 жыл бұрын
Make sure you're on a mode that works with your receiver type. Also, are you sure you don't have the Bayang version.
@TylerC2413
3 жыл бұрын
Just bought it a couple weeks ago. I have quads and a radiomaster 16s which works fine will both my mobula6 and tinhawk freestyle. Tried running in D8 and D16 and nothing going. Beta fpv cust supp hasnt been the best. I think there is something wrong with the stick.
@AlbertKimTV
3 жыл бұрын
@@TylerC2413 Are you sure you don't have the Bayang version? Maybe they sent you the wrong version.
@TylerC2413
3 жыл бұрын
100% have the new Special Edition version. I have emailed back and forth with beta fpv including sending them the barcode so they could double check. They just sent me the binding protocol through an email and told me to follow the steps to a T. It was exactly what the instructions said and exactly what I did. I even sent them a video of me doing the binding protocol to try to help diagnose the problem. The havent emailed me back since I sent them the video. 🤷♂️. Just going to use it as my sim remote. I was hoping to just fly my small drones around the house with it.
@Diown
3 жыл бұрын
Already purchased one of these! Hope the gimbals are not having dead spots again. (Refunded my previous literadio 2) Anyone here who has used the literadio 2 for longer than a year without issues with the gimbals?
@Diown
3 жыл бұрын
@@drumalley3063 and then you got twitchy gimbals?
@Diown
3 жыл бұрын
@@drumalley3063 They arrived (gimbals are Oke) and this time I got one with a faulty tuner. I contacted betaFPV and they will send me a new part. Have you tried contacting betafpv? Maybe they can send you parts also Just funny that I bought this 2 times and I got problems twice haha.. Also bought replacement gimbals. They work fine for now... no idea for how long.
@Diown
3 жыл бұрын
@@drumalley3063 yeah I fully agree 😕
@gabyjoe899
3 жыл бұрын
I HAVE I BIND PROBLEMS WITH TINYHAWK 2 , X-SRX AND XM+ RECEIVER ONLY WORKS ON FLIGHT SIMULATOR HEELLLLPP!!!!?????????
@AlbertKimTV
3 жыл бұрын
Did you buy the Bayang version?
@gabyjoe899
3 жыл бұрын
the only one that was available in RDQ
@chineepanda
3 жыл бұрын
Thanks Albert! I've been waiting on this review for weeks, but problem I experienced isn't addressed or mentioned. This TX doesn't bind to any Emax Tinyhawk series. HappyModel Moblite7 and NBD PMB Hummingbird either. I was able to bind it to NBD Hummingbird F4 pro though. Purchased directly from BETAFPV and there was no information about this. When RDQ listed this item two weeks ago, they added "This radio does not support newer FrSky receiver firmware" disclaimer. Lovely nice compact TX and I loved the original one, but this upgraded SE is hit or miss depends on what whoops/quads you have... or what you'll have later down the road. If anyone can confirm and share experience, I would love to hear it guys!
@AlbertKimTV
3 жыл бұрын
I think you got the Bayang version. That one isn't compatible with FrSky. I can confirm the FrSky version I have does bind with all those models you have mentioned.
@chineepanda
3 жыл бұрын
@@AlbertKimTV Thanks for a response Albert! It is FrSky version and I saw few other guys on NBD HIVE group experiencing same issue. It does bind to two of my whoops on D8... ofcourse I reached out to BETAFPV, but no luck. Also I have purchased two of these SEs and they are both performing same. Both binds to particular whoops, but it doen'st bind to Emax SPIs and NBD PMB hummingbird. If any of other followers/users ask and experience this issue, love to see a solution so whoop flyers doesn't have to carry around X9d+ and TX16s. Anyways, we always enjoy and appreciate your reviews and clever builds/mods! thanks!
@johnpaulhernandez2986
3 жыл бұрын
I have the same problem I am so glad you put this out I just returned it back to get fpv and they are going to send me another one idk what to do? It won’t connect to my tiny hawk fs 2.
@chineepanda
3 жыл бұрын
@@johnpaulhernandez2986 Man, you are lucky. I purchased directly from BetaFPV and I am screwed. Absolutely no aftersale service nor responds.
@johnpaulhernandez2986
3 жыл бұрын
@@chineepanda what do you recommended I don’t want them too send it again
@christesterman5004
3 жыл бұрын
What's up Albert?!
@craigjohnstone87
3 жыл бұрын
Looks like they are using the exact same gimbals which for me is the worst experience about the lite radio 2. I'm on my 3rd set and there are jitter and deadband issues. This has been the main complaint across forums. When you consider the jumper t-lite is around £10-15 more for 4in1 protocol, ships with hall gimbals, a screen and full openTX as standard and has support for ghost at full 350mW (crossfire is currently pointless out the box) I really think this radio has had its day.
Пікірлер: 139