I had nothing but issues trying to bind my first ELRS drone until I found this video. Thank you so much for the shortcut!
@KremerFPV
2 жыл бұрын
I'm glad you got it working!
@trajanfpv
2 жыл бұрын
85mm 2s is my favorite outdoor whoop size.
@KremerFPV
2 жыл бұрын
Yes, small but still powerful :-)
@FilipRadelic
2 жыл бұрын
I already have a 5x more expensive radio and I ordered this one on release day. It’s all most of us need.
@KremerFPV
2 жыл бұрын
It's nice to have something that you don't need to worry about breaking it. Have fun!
@MCsCreations
2 жыл бұрын
Awesome flying and review, Gal! 😃 Stay safe there with your family! 🖖😊
@KremerFPV
2 жыл бұрын
Thank you! You too!
@tane388
2 жыл бұрын
Nice combo, I order booth before 2 week’s, can’t wait to put my hands on it. Thx for review ;)
@KremerFPV
2 жыл бұрын
My pleasure. Have fun and happy flying!
@NATGEOANDSTUFFPaulbrannan
2 жыл бұрын
Love it.right up our street.great work gal as always buddy
@KremerFPV
2 жыл бұрын
Thanks man!
@JP-qq2kn
2 жыл бұрын
Check out the 1hr extreme gimble stress test on the betafpv lite radio 3 that Old Bee FPV did. It's crazy good
@KremerFPV
2 жыл бұрын
Interesting test :-)
@balajiprasad9046
Жыл бұрын
Nice flying...can you gauge how powerful it is comparing to the original mobula 7 2s.
@KremerFPV
Жыл бұрын
Thanks. Probably about 10-20% more powerful if I have to guesstimate.
@Reecefpv
2 жыл бұрын
Would you say the elrs version has better range than the frsky version
@entertainmentunlimited3256
2 жыл бұрын
I don't have elrs radio, can i put frsky receiver on this quad's flight controller?
@damianomotta1809
2 жыл бұрын
The only two thinks I don't like are: flight time below 4 min and type c connector(because I can use only the phone). For the rest it looks pretty good. Thanks for this review
@FilipRadelic
2 жыл бұрын
What do you mean you can only use the phone?
@damianomotta1809
2 жыл бұрын
@@FilipRadelic i mean that i can put it in the phone but not in the pc because i don't have the type c on my laptop
@FilipRadelic
2 жыл бұрын
@@damianomotta1809 you don't need a USB-C port on your laptop, just get USB-A to USB-C cable.
@damianomotta1809
2 жыл бұрын
@@FilipRadelic yeah, but i don't have that
@damianomotta1809
2 жыл бұрын
@@FilipRadelic btw yeah you are right, but still a downside of not having a normal port on the fc
@humbertocortes68
2 жыл бұрын
Hi Gal ... great review as always! The truth is not if it is a headache or laziness what I feel when I see that minimalist white radio design and I know I have to connect it to the pc and remember what the hell! And this is unfeasible in the field of flight .... I DO NOT understand that it is useful to save a few pesos in an economic radius if on the other hand you have to buy a laptop that is worth 20 times more .... it will be stinginess, negligence or stupidity .. ..In my flight group to have that radio is frowned upon and criticized ..
@humbertocortes68
2 жыл бұрын
Please ask beta by a 1dollar screen ...😏🤔🙄
@FilipRadelic
2 жыл бұрын
I’ve literally never used a screen on my radio after day one. Most people will configure their stuff once and forget about it, so this is a great radio for us.
@KremerFPV
2 жыл бұрын
Thanks Humberto, well I agree with Filip :-) It's a minimalistic radio controller and no screen is needed in this one in my opinion.
@wutufux1336
10 ай бұрын
I've bind my controller, I've bind the vtx. My issue is the motors cannot be reversed through betaflight. Can't fly it. It is always on the wrong direction. What should I do?
@KremerFPV
10 ай бұрын
Did you build it by yourself? It's using a custome ESC firmware as far as I can remember. If you need go reverse the motors and don't want to do it using the ESC configurator you can simply switch the motor wires.
@pacificnorthwestpilots6050
2 жыл бұрын
Wow. It can run at 500hz, that is a step for them
@sebbery178
2 жыл бұрын
Hi, can i connect LiteRadio 2 SE Radio Transmitter (ExpressLRS 2.4G) to this drone Meteor85 Brushless Whoop Quadcopter (2S) ELRS 2.4G ?
@KremerFPV
2 жыл бұрын
Hi, sure.
@joevo2
2 жыл бұрын
This works with crsf nano tx?! Thanks for sharing! So the only cons with crsf is that you can’t really configure it but it works?
@KremerFPV
2 жыл бұрын
My pleasure. As far as I can tell - yes.
@ethanvillaluz9801
2 жыл бұрын
Can you calibrate it by pressing the set up button just like the lite radio 2SE ???
@KremerFPV
2 жыл бұрын
Please check the user manual: support.betafpv.com/hc/en-us/articles/4412082282009-Manual-for-LiteRadio-3
@FlyturboKwad
2 жыл бұрын
Okay this setup with the VTX being powered when connected to USB on is not good idea. I updated the ELRS RX which take just about 2 or 3 minutes and now the VTX overheats and shuts down in about 30 seconds.
@KremerFPV
2 жыл бұрын
Wow this is very unfortunate :-(
@BowOneFire
2 жыл бұрын
what do you think the range of this controller on elrs will be?
@KremerFPV
2 жыл бұрын
The max power is 100mW and it can get you very far, even with the internal antenna of this TX.
@junkthe
8 ай бұрын
How to run Betafpv Configurator on windows 8 ? Not 10 or so. Please test and find solution ?
@KremerFPV
8 ай бұрын
Sorry but I don't have a windows PC.
@YoungGhillie
2 жыл бұрын
i cant bind them to each other
@KremerFPV
2 жыл бұрын
Did you sort it out?
@YoungGhillie
2 жыл бұрын
@@KremerFPV yeah
@KremerFPV
2 жыл бұрын
@@YoungGhillie great. Happy flying!
@Reecefpv
2 жыл бұрын
How in The world did you get yours to work. Lol. Betafpv did a giveaway and every single person that got this package isn't working and they obviously can't help us. We are bound to the Meteor 85 and all of the channels move in betafight. But our throttle channel is jumping all over the place like the baud rate isn't right it or something. So therefore it can't get a steady signal so it just keeps saying RX loss or a bad RX. back and forth. One guy got at the arm for a fraction of a second but then it fail safed again. While saying 99%rssi too
@KremerFPV
2 жыл бұрын
That's really weird. What did BETAFPV say about it?
@Reecefpv
2 жыл бұрын
@@KremerFPV They haven't answered yet but one of the guys supposedly figured it out by reflashing to 4.3rc and set dshot_bitbang = off in cli. I haven't tried yet but a few other have already got theirs to work this way. It was like the baud rate of the spi rx didn't match the baud rate of the fc. So it was getting inconsistent signals, every few cycles
Пікірлер: 52