I like the fact that you told us how to deal with "problems" that might arise rather than just showing how the foot works. Thank you for that.
@marianhunt8899
25 күн бұрын
Excellent. Thanks for including the trouble shooting ideas too. We'll done!
@alleycatjack4562
8 ай бұрын
Thank you for making this video. I had no idea this kind of foot exsisted. I have short legs, and ive had to hem every single pair of pants ive bought for the past 25+ years. This will make things a lot easier and faster.
@lopangayerta4871
Жыл бұрын
Thanks for this beautiful insight on using this kind of foot.
@ncboot5014
Жыл бұрын
EXCELLENT VIDEO WITH CLEAR INSTRUCTION ~ THANK YOU SO VERY MUCH!!! 🙂
@MadamSew
Жыл бұрын
Glad it was helpful!
@jackiememon8664
4 ай бұрын
Thanks for this technique video I Just bought this foot set and didn't know how to use it .👍👌👌👍
@MadamSew
3 ай бұрын
You’re welcome 😊
@rosemarie7945
3 жыл бұрын
Thank you for your technic to sew the first and the end of fabric
@abrogard142
Жыл бұрын
lovely. i like the foot. i haven't seen one like that.
@MadamSew
Жыл бұрын
Glad you like it
@-mike-8134
3 жыл бұрын
great tips! thx
@marcelonetto9235
3 жыл бұрын
Boa noite, obrigado pela generosidade e pelo vídeo interessante e instrutivo. Hoje com você aprendi a usar esse "Presser Foot", já a minha primeira experiência com esses equipamentos (presser foot) ensinou-me que sempre haverá uma maneira mais simples e errada de se fazer algo Abraços, desde o Brasil......
@sevenwindsinc9693
2 жыл бұрын
Thank you 😊
@bbusyflying
4 жыл бұрын
Can this presser foot hem jeans?
@crissiecook2207
7 ай бұрын
I wish the size on the foot was stamped in black because it is hard to read what size the tube is.
@slinkydog9999
3 жыл бұрын
I took me longer to use this than to use my fingers. My fabric kept slipping out, and the foot was extremely loose in the snap on ? Is this normal?
@robinrowe8025
3 жыл бұрын
Did you tighten up the screw ?
@tanyapalmer8130
Жыл бұрын
Do I need a shank attached to my singer 4411? The hem roll foot does not lay flat. Should it lay flat on my machine or not?
@Mickey-jn8hz
Жыл бұрын
This is the “other” foot for rolled hems. Please, which is best?
@Mickey-jn8hz
Жыл бұрын
Which do you recommend? Please because I don’t want to buy both.
@user-22-
3 жыл бұрын
What would cause my finished hem seam to not lay flat but become slightly wavy??
@DewyBug
2 жыл бұрын
I'm guessing your fabric was stretchy...
@hazelblair6634
5 жыл бұрын
can this be used on stretch fabric? thank you for the video.
@MadamSew
5 жыл бұрын
Hi Hazel, I've used the wide hem foot with knit fabric. But guiding the fabric in the squirrel is definitely more challenging with stretch fabrics. I wouldn't advise it for a novice sewer. Practice with some scraps first. Good luck!
@hazelblair6634
5 жыл бұрын
@@MadamSew thank you for the heads up. x
@kricketkitty
Жыл бұрын
Omg, I had a long comment and it got deleted...So I'm losing all my hair trying to figure out as a new sewist, how to do what should be super simple...Sewing hems around 4 corners, to make napkins. Lots of them. The corners are too bulky, I tried a hem foot but it was too narrow and I thought I would literally pull all my hair out if I had to fight with this thing at each corner, starting over. I don't have the patience to fuss with regular mitered corners, and it takes forever too, I tried simple double fold hemming, which left bulky corners. I'm about to buy a walking foot, Then I saw there was super wide hemming feet, like in your video. The question is can you do the whole napkin, all the way around, the corners, without stopping? I grit my teeth with the thought of having to stop and start with cutting thread, realighing fabric, starting to sew again. I want to be able to just do it with one fell swoop. No stop and start a million times, no ironing ahead of time, the iron fumes give me a migraine, no rulers and geometry to miter the corners. Am I asking too much?! Maybe I'm using the wrong weight of cotton fabric, leaving no feasible way to get flat, uncluttered, unbulky corners. Thanks kindly : )
@MadamSew
Жыл бұрын
Sewing corners with the wide hem feet is doable but not easy so I would suggest to stick with mitered corners. I would do that. In this video I'm using the hot hem ruler which makes ironing mitered corners very quick and easy! m.facebook.com/MadamSews/videos/mitered-corners-using-hot-hem-ruler/2462476477223048/?_se_imp=0NZZBFr6xqFvrnxf7
@donnamizell4327
2 жыл бұрын
So you still have to roll the hem up before using foot?
@MegaBpop
Жыл бұрын
Yea, I think so.
@pinkdiamonds77
4 жыл бұрын
I got the set which on is this piece???
@roslyntiotis-cook2908
4 жыл бұрын
Where did you get them tobuy ilive in Trinadad
@robinrowe8025
3 жыл бұрын
Amazon and wish have them
@kina7128
Жыл бұрын
Please tell me the brand of your sewing machine. Thank you.
@MadamSew
Жыл бұрын
A Pfaff
@kina7128
Жыл бұрын
@@MadamSew Thanks;
@allythompson6973
2 жыл бұрын
I just got your foot. I'll let you know how it goes lol
@MadamSew
2 жыл бұрын
Definitely! Waiting for the review😍
@lynns755
3 жыл бұрын
What is a tubular hem?
@MonsterNus
Жыл бұрын
Believe she means sewing a hem “in the round” where you don’t have ends. Like a skirt that is sewn together already and just needs a hem.
@SuperDorothyofoz
3 жыл бұрын
Lesson was good but volume was horrible. I could hardly hear what you were saying.
@lindseyingoldby532
Жыл бұрын
Try putting on subtitles
@laurie4
5 ай бұрын
This is a horrible attachment…would never recommend
Пікірлер: 43