Thanks a bunch. I tried this a year ago, and my fiance used the screws and the old band. I'm glad I kept the new parts. I'm going to try this again. Thanks a bunch! You saved my green egg also!!
@maxboykin6410
Жыл бұрын
Green Egg owner for 10 years. I have changed bands a few times and always wondered if doing things correctly. Awesome video with practical instructions. Thanks
@charlieruff3990
Ай бұрын
Thanks for a great video. I just changed my old set up bands to the new set up on my 15 year old egg and it took about 2 1/2 hours. I feel great.
@bobs9758
2 жыл бұрын
I just upgraded my large BGE to the new band system following your method and the supplied instructions. It was a huge help being able to watch your video before attempting it. Great job.
@adventureswithjayusa9570
2 жыл бұрын
Thank you!
@williamwhaley2771
2 жыл бұрын
Jay - you are the man. This saved me a lot of time rather than trying to follow the confusing instructions that came with the new band hinge assembly.Thanks so much for the video.
@adventureswithjayusa9570
2 жыл бұрын
Glad I could help you out!
@bobellison2547
3 жыл бұрын
Thank you very much. The new bands finally came back in stock this week and your excellent step-by-step tutorial will all the insights of someone that has done it before was of great assistance to me. I wish I could hit 'like' more than once!
@adventureswithjayusa9570
3 жыл бұрын
Thank you very much! I glad I’ve been able to help so many people.
@FlynPig911
2 жыл бұрын
Great demonstration and explanation on using the spacers and installation.
@thomasbirmingham4371
2 жыл бұрын
Mate, I’m sending you profound thanks from Australia. That video on the BGE site was worse than hopeless. You saved my Egg.
@adventureswithjayusa9570
2 жыл бұрын
Those egg videos are useless! Glad I was able to keep you rolling smoke!
@curtiseh
3 жыл бұрын
Great video and great camera work by your young cameraman! This video was very detailed and you took the time to explain EACH step! I will be using this video today as I replace the old box hinge assembly to hopefully correct this ongoing overbite issue. Thanks again.
@adventureswithjayusa9570
3 жыл бұрын
Glad to help! I’ll pass the kind words along to my cameraman!
@jasonroberts9229
3 жыл бұрын
Watched a few vids while I hunted down a large hinge kit, not easy...Came back to this one as my install guide. Simple, direct, well explained. Thanks, Jay.
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help you out!
@jhancock4333
2 жыл бұрын
Jay, you are the man! I wasted two hours until I found your video. Thanks so much.
@adventureswithjayusa9570
2 жыл бұрын
Glad I could help!
@anthonygadaleta9324
3 жыл бұрын
Jay You, Sir, are a great teacher. Your instructions and approach helped me perform this task right, the first time. Thank you very much
@adventureswithjayusa9570
3 жыл бұрын
Thank you very much!
@rickbarton2457
3 жыл бұрын
Nice job! The only thing missing from the video was a cold beer! I too appreciated the step-by-step instructions with insights where the written instructions failed to clarify. Thank you for making this video!
@adventureswithjayusa9570
3 жыл бұрын
Glad to help out!
@jeffreysheftsd.c.5583
3 жыл бұрын
I am a newbee to the "Egg" universe and your tutorial on installing the new style band saved me so much time. Thank you so much.
@adventureswithjayusa9570
3 жыл бұрын
Glad to help!
@czarroman
2 жыл бұрын
Great tips. When the kit came it looked overwhelming. Your video allowed me to remove the old one (which broke in the middle of cooking 2 Boston butts) and replace in about 1 hour. And I did not have to repeat any steps. Thank you.
@alisonclark7540
Жыл бұрын
All I can say is thank you!! Your step by step instructions are excellent and I rewound the video or stopped it many times throughout the installation process. If BGE is going to write instructions with an “Ikea” style photo, they need to hire a better artist. Without this video I would have stared at it with zero success.
@adventureswithjayusa9570
Жыл бұрын
Glad to help out!
@glenkuhl9349
11 ай бұрын
Just finished replacing the band on my large egg. Your video made it so much easier...thank you!
@keithburks4753
2 жыл бұрын
Thanks ordered a new hinge assembly for my XL. Will be replacing the gasket and installing the new hinge and bands the next day or two. Video is a big help.
@steveball2638
4 жыл бұрын
Thank you for taking the time to make this video. After 10 years of using my BGE I need to replace the hinge and this video is very helpful.
@adventureswithjayusa9570
4 жыл бұрын
Thank you!
@bradheins3554
3 жыл бұрын
Great job on your step by step video I installed a new hinge on a 6 yr old BGE just now, watching the video as I assembled mine,Thank you
@SacOrcas
3 жыл бұрын
Thanks for the instructional vid. Just brought home a BGE that belonged to my wife's family from decades ago. Trying to refurbish it...this helps a lot!
@richardzielinski4930
3 жыл бұрын
Watched it twice, watch as I assembled… it took me more then 28 minutes but great video to follow…no more gaps…fairly straightforward and far superior then the instructions in the box! Thank You!
@adventureswithjayusa9570
3 жыл бұрын
Glad it helped!
@jtrt1
3 жыл бұрын
Great video. Thanks for taking the time. I'm ready to do mine now!!
@adventureswithjayusa9570
3 жыл бұрын
You’re welcome!
@caleb7428
4 жыл бұрын
Thanks for the detailed video! I replaced mine today and watching this first was a major help.
@adventureswithjayusa9570
4 жыл бұрын
Hope it helped!
@billhicks4926
11 ай бұрын
Very helpful video, thank you for posting. The new style band is WAY better than the old which was much more difficult to work with.
@traviskaspar5481
4 ай бұрын
Thanks for the tutorial. I finally upgraded to the new hinge and zero underbite is a beautiful thing.
@charlesbryan3005
3 жыл бұрын
Excellent video. I plan to go buy new bands tomorrow and install them on my 20 year old large Big Green Egg. I am sure I will come back to this video for help! Thanks very much.
@adventureswithjayusa9570
3 жыл бұрын
Glad to help out!!
@charlesbryan3005
3 жыл бұрын
Installed new bands this morning….with your video close by. Everything worked as you demonstrated. Replaced the gasket and nest as part of the project. My 20 year old Big Green Egg is like new again!
@adventureswithjayusa9570
3 жыл бұрын
Outstanding! I’m going to make a gasket replacement video one of these days.
@allantz7309
9 ай бұрын
Replaced mine yesterday. Your video was extremely helpful. Thanks.
@kennethanchors3156
3 жыл бұрын
Really wished I had watched this first. The instructions are vague at best. We now have it sealed and it works great. Thank you!
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help!
@craig7887
Жыл бұрын
My hero! I just put on the new band and handle and this wss really helpful! Thank you!
@adventureswithjayusa9570
Жыл бұрын
Thanks!
@bigtee94
3 жыл бұрын
Best explanation of how to change and align the band. This has been a struggle of mine for almost 10 years. This video made it simple. Thanks!
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help!
@geraldschwartz5941
2 жыл бұрын
Many thanks for your video. I watched it today and it made replacing the hinge and bands on my 8 year old large BGE much easier!
@JamesBurgin-m2d
2 ай бұрын
Great video! This retooled my 13-year-old egg.
@coffdvm
3 жыл бұрын
Got it done but don’t think I coulda done it without this video ….Thanks
@adventureswithjayusa9570
3 жыл бұрын
Glad to help!!!
@MsMayamonster
5 ай бұрын
Followed your video step by step. Install came out perfect! Thx Jay!
@picster9990
2 жыл бұрын
This was an outstanding and very helpful video! I followed your presentation step by step and replaced the bands on a LARGE and and X-LARGE BGE this past weekend and your approach was simple, straightforward, and easy to follow. Thanks... the instructions were basically duty paper and it would have been a struggle without this video. #ApplauseAndManyThanks
@bstigleman
Жыл бұрын
Thanks for the great video! You probably saved me 2 hours plus a trip to confession for all swear words I would have said trying to figure this out on my own.
@adventureswithjayusa9570
Жыл бұрын
You’re welcome!
@JohnJohn-nz7kb
Жыл бұрын
thanks Jay !! great video it helped with the upgrade to my 22 year old large BGE
@adventureswithjayusa9570
Жыл бұрын
Awesome glad to help! Egg on!
@germarsweb
2 жыл бұрын
Thank you so much. Great video and good angles to see every step.
@adventureswithjayusa9570
2 жыл бұрын
Thank you very much!
@jimmoore4643
25 күн бұрын
Great video. Made the hinge / band replacement super easy. Two things. First, you don't need to remove the top. Just slide both bands over the top into place. Second, I'll buy you a set of sockets if you promise to use them. I can't watch that open-face wrench any more.
@tomtacheny
3 жыл бұрын
Thank you Jay! I've been trying to get my new bands adjusted properly for a few months. I "get" how the new bands work now thanks to you.
@adventureswithjayusa9570
3 жыл бұрын
Glad to help!
@alananderson4807
3 жыл бұрын
Hey Jay. Just want to say thanks for your video and how you explained every step. I just got the bands for my 21 year old egg to replace the old, old style bands! I put the bands on using the instructions, but it didn't seem quite right. I didn't use the spacers correctly and left those extra fasteners that go on the front of the bottom band off completely, so that may have been why it leaked smoke. I came to KZitem and found your video and have completely re-installed, so fingers crossed, no leaks when I fire it up. Oh, those dimple markers on the top and bottom, I had no idea that was to line the top and bottom half, so I didn't bother lining them up the first time. Thanks again!
@adventureswithjayusa9570
2 жыл бұрын
Glad I could help!
@rafereaves462
3 жыл бұрын
Thanks for the video. My kit did not have instructions, so, this was a great instructional video.
@adventureswithjayusa9570
3 жыл бұрын
Glad it helped!
@craigguinn5423
10 ай бұрын
Pretty helpful, got mine done today. Instructions are crap. If you leave the band screws off, you don’t need to remove the top.
@jeffbatl
4 жыл бұрын
Great video. appreciate that you filmed the entire process
@adventureswithjayusa9570
4 жыл бұрын
Thanks, hope it helps!
@gerardburke8605
2 жыл бұрын
Thank you Jay. Following your video made this very straight forward. BGE should hire you to do their installation videos 😁
@keithlambert6217
3 жыл бұрын
Really, really well done tutorial of the entire process.
@adventureswithjayusa9570
3 жыл бұрын
Thanks!
@jimhottle1694
3 жыл бұрын
Great video...thank you....I watched it and then went step by step with you as I did mine.
@MarkMiller-m5f
Жыл бұрын
Great video. It would have been very tough without it. Thanks!
@underbj
3 жыл бұрын
Excellent video sir! Just got done with my new band install and your video was a big help.
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help!
@JeffFitlow
3 жыл бұрын
Great video. So much better than instructions for BGE.
@adventureswithjayusa9570
3 жыл бұрын
Thanks!
@glennbaker
3 жыл бұрын
Thanks for the detailed instructions. Very helpful!
@adventureswithjayusa9570
3 жыл бұрын
You’re welcome!
@edwarderickson3000
3 жыл бұрын
Good job. I just followed along this morning and it looks great.
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help!
@webbcolegrove5309
2 жыл бұрын
Thank you. Seeing it done is very helpful.. No directions in my box with new bands..Bought a new gasket also. I’ll be changing that first while top is off. Than installing new style bands/hinge.
@obaame0307
3 жыл бұрын
Purchased band assembly yesterday from our local dealer. Not happy w the price, but oh well what can we do. Turned it into a project with son and I and got to spend some quality time w him on the installation of the band. We went ahead and and replaced the gaskets due to overbite/underbite being so bad. Used your video as a quick reference guide and it was a breeze. Appreciate your video sir!!
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help!
@mikeymike9616
10 ай бұрын
Happy Holidays! I know your comment was 2yrs ago, but how much did the new style band assembly kit cost?
@obaame0307
10 ай бұрын
My memory is not the greatest, but I'd say around $125 roughly. I've had zero issues since installing it. @@mikeymike9616
@evanthorne7136
3 жыл бұрын
Very well done and extremely helpful. Thank you for doing!
@adventureswithjayusa9570
3 жыл бұрын
Thank you!
@jennifernickerson182
2 жыл бұрын
Thank you! Was struggling and you were most helpful
@SK-ry6bg
3 ай бұрын
Excellent video!
@26chrisb
4 жыл бұрын
A really useful instructional video in 'real-time'. Thanks v much
@adventureswithjayusa9570
4 жыл бұрын
Hope it helped!
@kenjohnsen8566
3 жыл бұрын
Great video. Thanks for taking the time for all the explanations
@adventureswithjayusa9570
3 жыл бұрын
Glad to help!
@jimivey9265
3 жыл бұрын
Great video, I was about doing this and you made the step by step process easy to follow
@adventureswithjayusa9570
3 жыл бұрын
Thanks!
@tonyarnold4399
3 жыл бұрын
Great video. Replacing mine this afternoon!
@adventureswithjayusa9570
3 жыл бұрын
Hope it helped make the process easier!
@craighorve4127
3 жыл бұрын
Excellent video. Thank you for the tutorial Especially the extra screw. Was pulling my hair out..
@adventureswithjayusa9570
3 жыл бұрын
You’re welcome!
@JoshReimann
3 жыл бұрын
Good work man! This was very helpful. I love my BGE but they need to work on instructions. This is great!
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help!
@bobamburn7081
4 жыл бұрын
Thanks for the video. I had my hinges upside down. Probably should've started BEFORE Friday afternoon and 2 beers. Nice hat, by the way.
@adventureswithjayusa9570
4 жыл бұрын
Thanks! Love Joe!!!
@andynesbitt8242
4 жыл бұрын
Thank you for this video! It helped me a lot!
@adventureswithjayusa9570
4 жыл бұрын
Glad it helped!
@bodydenny
3 жыл бұрын
Ridiculously informative. Thanks!
@adventureswithjayusa9570
3 жыл бұрын
Hope it makes it easy!
@tridogdude1512
4 ай бұрын
Good video. There's no reason to remove the dome though. The new assembled bands will slip right over the top.
@mhmobley
3 жыл бұрын
Thanks, Jay! Replaced the bands on my 16 year old egg this morning. Your video was great. Happy thanksgiving!
@adventureswithjayusa9570
3 жыл бұрын
You’re welcome! Happy Thanksgiving!
@glenbowman1167
3 жыл бұрын
Thank you!! Great video...so easy to follow along!!
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help!
@SouLShakeRProdX
Жыл бұрын
Thank you!! Worked perfect
@tixiepoo
Жыл бұрын
So incredibly helpful! Thank you!!!!
@adventureswithjayusa9570
11 ай бұрын
Glad it was helpful!
@chaddombeck
2 жыл бұрын
This video was very helpful, appreciate it. As a gift, can I send you a 7/16 socket set? 🤣
@adventureswithjayusa9570
2 жыл бұрын
Thanks! The reason I use a wrench and not a socket is as the bolt bends it can catch the socket and make it nearly impossible to remove.
@gregmorton6422
3 ай бұрын
Ratchet wrench
@carysilverman1517
3 жыл бұрын
Dude, thank you so much for this video. Extremely informative and helpful. I'm about to tackle this on my 12 year old XL this weekend and I desperately wanted to see someone do it. Again, thanks for sharing this.
@adventureswithjayusa9570
3 жыл бұрын
Glad to help! Let me know if you have any questions.
@jimmartini77
2 жыл бұрын
I wish I had seen your video before I put mine together. I would have saved a lot of aggravation and uncertainty.
@gerardpowers9134
Жыл бұрын
Great video! Thank-you for sharing. A ratchet spanner would have saved you a great deal of time.
@adventureswithjayusa9570
Жыл бұрын
Thanks for the positive comment. I don’t mind how long it take as I’m retired. Plus they tend to get hung up as the bolt bends.
@edgein3299
3 жыл бұрын
Helped me out a lot.
@TDRUSH3000
3 жыл бұрын
Thank you! Very helpful...
@reffan2204
Жыл бұрын
Great video...Why you put the springs in upside down? If you put them in the other way, they fall out when there is no tension on them. Thanks for the video.
@garybryan3846
Жыл бұрын
Great video
@adventureswithjayusa9570
11 ай бұрын
Thanks!
@wwfgumby
2 жыл бұрын
Thanks for the video, it helped when I changed my Large BGE over to the new set but I'm trying to work out why there are aligment holes when first placing the lid back on. If I line mine up, the temp gauge is off centre and it doesn't look right.
@adventureswithjayusa9570
2 жыл бұрын
I would align the temp gauge hole with the mark on the bottom.
@wpf6915
3 жыл бұрын
Thank you! Very helpful
@adventureswithjayusa9570
3 жыл бұрын
Glad it helped you!
@DavidGurrney7589
Жыл бұрын
Great job!!! I know it's asking the impossible and I know most dont have one but torque specks on those bolt would be nice🔧🔧🔧🔧
@adventureswithjayusa9570
Жыл бұрын
I asked egg about that. Their reply way to make sure the bolts are bent. I agree with you but that’s the answer I got…
@barbarabauman1129
2 жыл бұрын
Thank you now we see if we can do it
@GeoHvl
11 ай бұрын
My Egg turn 17. I replaced the old style hinge and bands with the new assembly. The lid no longer opens completely as it did with the old hinge. I guess I’ll get use to it. I replaced the Nomex while I was doing this.
@adventureswithjayusa9570
11 ай бұрын
That’s part of the redesign. Keeps the lid from falling out if the bands aren’t tight enough.
@sergiomartinez6668
3 жыл бұрын
Really helped me thank you
@adventureswithjayusa9570
3 жыл бұрын
You’re welcome!
@PeenTip
7 күн бұрын
When I tighten my bands the back lip of my egg raises up
@Pkramm
Жыл бұрын
I’m changing my band to the new one, but I need to do my gasket too. Should I change my gasket before my band assembly ?
@adventureswithjayusa9570
Жыл бұрын
I would. Much easier to change when it’s completely disabled.
@tedvenhorst1816
2 жыл бұрын
Jay…. Where did you get that nice grill grate on your green egg. Seems wider than anything I’ve seen?! Thanks Ted
@adventureswithjayusa9570
2 жыл бұрын
It’s the Big Green Egg cast iron grate.
@getech
3 жыл бұрын
good video, thanks!
@adventureswithjayusa9570
3 жыл бұрын
Thanks!
@stevensmithwick1883
Жыл бұрын
Wish I would have watched your video. I was given a big green egg and readjusted the bands to correct the underbite. The first time I opened it...the top went crashing to the floor. 😔
@adventureswithjayusa9570
Жыл бұрын
Sorry to hear that! I hope you were able to get a replacement lid and new style band.
@ronc6166
3 жыл бұрын
Thanks for showing this
@adventureswithjayusa9570
3 жыл бұрын
Glad I could help.
@Hamlocks
2 жыл бұрын
I was just opening my egg to remove my Easter brisket and the hinge fell apart, what a predicament lol, where can I get the new style hinge? XL egg
@adventureswithjayusa9570
2 жыл бұрын
Ace hardware is my go to.
@themercilessming
8 ай бұрын
Thank you
@alexalvesjr
3 жыл бұрын
Thank you!!!
@adventureswithjayusa9570
3 жыл бұрын
You’re welcome! Glad I could help!
@bradnein4946
Ай бұрын
My egg will not stay up when I open for first time - what am I doing wrong?
@lbeckons304
4 жыл бұрын
I had to redo mine earlier today, somehow when the store assembled it the hinges were not on correctly, this video would have been helpful. When all the way open do your top gasket touch the hinges?
@adventureswithjayusa9570
4 жыл бұрын
LBeckons no they should not. I think you might ave the bands to close together. However that is a guess without pics.
@jeffreysawchuk8024
3 жыл бұрын
Thank you fir the video, I need to replace the bands on my BGE. The video will help. Only question I had is.... if BGE doesn’t send the spacers, how did you get them?
@adventureswithjayusa9570
3 жыл бұрын
The spacers should be included but if they’re not your dealer should have some. When I was working at Ace we always had a few extra sets just in case someone needed them.
@kennethanchors3156
3 жыл бұрын
After using it a few times we have gaps again in the back. How should we try to correct this? Thanks for any help.
@adventureswithjayusa9570
3 жыл бұрын
Loosen the upper band and use the spacers to readjust the top. MAKE SURE to remove the springs prior to any adjustments.
Пікірлер: 214