LOL..its always amazing how many TROLLS appear just to show disrespect for another persons property in these RC videos. Too bad they can't show a vid of their own.. I wonder why that is? Could it be that they spend so much of their time glued to their pc's and showing disrespect for others that they can't find the time or $$ or initiative to try it themselves? YEP!!!
@lightningfastrc
9 жыл бұрын
Same here. Some people just don't appreciate the work that some hobbyists put into their cars.
@Toms3rdNut
7 жыл бұрын
Steve T not everyone has your opinion. you must be from California because you think the world should be exactly how you want it, and no one can say what they want without someone like you bursting in and getting but thirty as fuck hahaha!
@BacusJT
7 жыл бұрын
Steve T everywhere, even if you block them. It makes KZitem a bit more challenging.
@CarlJohnson-km8zr
7 жыл бұрын
the money he spent......grown ass man, should be riding something like that....I have RC planes, but always thought about Remote Controlling a old junk car to jump it off a cliff, nice idea but could of been executed lil better with gearing, removing engine governor. that thing should fly!!!!!!
@noodlesflawed4800
7 жыл бұрын
Ain't that the truth! Looks and runs great. Small steps..
@gsorrentino88
7 жыл бұрын
It's a wonderful sound
@randygardener
7 жыл бұрын
four stroke will do that
@KmOnEyisdabest
8 жыл бұрын
mate a trailer u can sit in and have it drive u around
@shane_7even_ten569
7 жыл бұрын
Kyle Pree hell ya buddy!!! Who needs fast when you car tow yourself along with it
@JamesXcapesNY
9 жыл бұрын
The exhaust sounds awesome, great job man!
@rickyracer8717
6 жыл бұрын
Here in New Zealand, this setup (without the R/C) gets fitted under a chilly bin (cooler box) and ridden around, sometimes even raced! 😂 😂 Funniest thing I ever saw! Like your engineering, mate! I would add suspension and a differential with rain tyres off the karts, that have treads.... I like it! Well done, mate!!
@lpardy
12 жыл бұрын
No formal plans, I have about 600 pictures. It was something to do and to teach my 16 old kid how to TIG weld and problem solve. Never sold it, we take it out now and then and just have fun and chase cars in the parking lot. The tires are to soft to smoke, they grab pretty good on take off. I did play with the sprockets and got more top end but was to slow on the take off. Both servos are Futaba S9157 (one for steering and the other for the brakes and throttle), lots of torque.
@markwatts84
4 жыл бұрын
where does one have to go to get access to these photos?
@raven8225
2 жыл бұрын
Those that love handmade oversized RC Big Boy Toys like me wouldn’t mind building something as beautiful as this. You say you have 600 pictures of this build? Do you have a place where people can go to see them on the internet? It’s beautiful because it’s a RC car and it’s built as strong as a go kart. 👍♥️👍
@firemanjim324
7 жыл бұрын
what do you use for a steering servo on something like that? I have a "1/2 scale" go kart I have been wanting to turn into an R/C car..... I heard you could use a windshield motor as the servo, but I know nothing about this stuff....
@effervescentrelief
7 жыл бұрын
For those claiming he's driving it scared, keep in mind how easy it is to spin and flip. With such a short wheel base and no weight that thing will go end over end without hesitation.
@calebshofner970
7 жыл бұрын
I love the sound but rev that thing up and lets hear her screeeeaaammmmm
@robbytheatomicengineer5749
7 жыл бұрын
I wonder what control system do use what kind of servos do you use plz tell me I'm looking to building one of these
@vamperspective3332
3 жыл бұрын
Did u find out wich u should use?
@robbytheatomicengineer5749
3 жыл бұрын
@@vamperspective3332 never got forward with the project
@corsomike1
10 жыл бұрын
for all that have asked its a bar stool racer frame .
@thevintagehifiambassador8524
7 жыл бұрын
I definately would like to hate this video but I can't. it is not possible to dislike it.
@keysboater1
6 жыл бұрын
Yes that thing is great. I like how simple yet well built it is. I built a giant scale buggy with a water cooled C1 pocket bike motor on it. It has been displayed on RCuniverse for years. These guys who are trolling probably do not know how to air up their own bicycle tires. Once again...Very nice Job!
@silverssonyoutube8438
12 жыл бұрын
ill give ya $50bux that including shipping .
@firmclock
12 жыл бұрын
this is the best home made rc car i have seen on youtube so far
@gadgetdeez7069
7 жыл бұрын
For the love of all that is holy, LET SOME AIR OUT OF THOSE TIRES.. I KNOW you see how little of the tire is actually on the ground.. Youre not carrying any load on them.. They probably only need 5psi max.. Who knows, maybe not only will you actually make the tires last longer, but you may find out that the thing doesnt jump a foot in the air when you hit a small bump/crack in the parking lot.. HAHA!! Wouldn't hurt to have a smaller axle sprocket too.. that 5-8hp engine should move that NO PROBLEM with as little as that weighs.. It wings out way too soon.. LOL
@hansfritz48
7 жыл бұрын
a nice power wheels body and it'd be pretty cool
@pauls5745
7 жыл бұрын
haha nooo, I'd even have bigger sprocket to keep speeds below 40mph. thinking thats a predator 79cc? that engine in minibikes the guys are running a 56T sprocket and boy it hauls the mail very nicely engineered!
@newscooler12316
7 жыл бұрын
pds tech that sprocket he has on is like a 70-80 tooth probably on goes 30 mph by the looks of it
@steve5912
6 жыл бұрын
pds tech looks like a gx160
@CarminesRCTipsandTricks
6 жыл бұрын
Let the Haters Hate..... They have no life. As an experiment, it's nice. OMG that SOUND!!! Better than ANY 2 Stroke Engine I've ever heard. Sure, a 2 Stroke is going to make more power, but they all sound like Leaf Blowers. (and I'm IN 1/5 Scale Gas Buggies as my Hobby). Almost makes me want to find out if a reasonable 4 Stroke Engine like that, is available in suitable 1/5 Scale size. It may also be the Pipe, but it *almost* sounds like a small Cruiser Bike!!!
@newnamecomming9357
9 жыл бұрын
sounds cool and also cool engineering but kinda slugish ...... yay brushless is best big boy. still big thumbs up man.
@ROTAXD
7 жыл бұрын
Epic rc it's his throttle finger that's sluggish. From a dead stop with the granny gearing he has on it...that honda clone should boil the tires...he's afraid of it.
@jrbigboy1
6 жыл бұрын
This is great!! Sounds good too. Congratulations on this. Really cool to watch.
@ayebee1207
9 жыл бұрын
Kudos for not showin butt-crack on starter pull!!
@Godwillsortyou
6 жыл бұрын
Plenty of haters. I used to race dirt track go karts, similar engine, Honda gxh200 with 218 kit. No suspension, low tyre pressure. It could pull 60mph. Put heavier springs in the centrifugal so the clutch comes in at higher rpm, it will launch . You don't need suspension, an F1 car is pretty stiff and low. Scale that down you will get your suspension in chassis flex especially if you put a join in the rear crossmember.
@d.p.millerderomero2059
7 жыл бұрын
Pretty Cool! I may do this? ,just rebuild Manco Dingo. put in a 212 cc, had fun, but back is not in good shape to ride. Maybe,? Thinking remote !on a Dingo.
@PeterPiccolo
9 жыл бұрын
u should check out the losi 5t and reverse use some of that technology to add a 3 speed transmission where u can fine tune where each gear shifts just by spinning a lock screw on the gear set bolt... awesome machine tho.. largest i have is a 1/8th scale what would u say that machine is 1/3? haha good job awesome
@maxmorgan2297
7 жыл бұрын
super good job m8, how about higher "buggy"wheels as a offroad version, think that type of engine would love it.. just an ide;) MaxDK
@josephatnip2398
6 жыл бұрын
I think it's cool I'd strap a GoPro on the front or you can paint it green and put some fake explosives on it make it look like the RC XD from Call of Duty Black Ops
@andyman11862
7 жыл бұрын
waisted all that time and thats as fast as it goes , ya dont put 4 stroke moters in rc cars , snales , slow slow , last place , hot wheels go faster than that , looks cool till you see the shity performance , lol , good luck buddy
@FSEVENMAN
7 жыл бұрын
once you make something this big I don't understand what the point of RC is why not make it a little bigger and just get in the fucking thing and drive it I would think it would be way more fun
@cliffcampbell8827
2 жыл бұрын
Do you have an ultra flimsy lexan body picked out for that thing yet?...awesome build by the way.
@bloodshadow7082
2 жыл бұрын
These huge RC vehicles gives me an idea for a RC Push Mower, a lazy way to cut grass while sitting in the shade on a hot day. 😂
@josepalominojaen2906
11 жыл бұрын
sorry,I am writting in spanish.use de translate please. el eje de donde lo has sacado de un kart o de un pocket quad. a y el motor honda cual es
@wil54
7 жыл бұрын
Should lower the gear ratio if you can to something like 1:3 should be fine as it's not really carrying any weight?
@rajgill7576
7 жыл бұрын
with all DUE reapect, I thought the while point of a smaller, nonrideable car was to fucking smash on it
@bilboswaggins337
10 жыл бұрын
Show it with the body on it and make it go faster; then maybe people will consider buying it.
@chrisarnold9880
7 жыл бұрын
I want to buy it. I have seen it up for sale for $750 and I am very interested in it at that price. Please respond to me.
@Skoda130
7 жыл бұрын
Needs a CVT transmission.
@farhanhussein7726
6 жыл бұрын
Man this people have skills and they not using it ,,,let me but my brain in your RC and make you millionaire
@stevenmillar8810
7 жыл бұрын
thats not an rc thats a go cart with 2 servos a receiver and probs a 2.4 radio system oh wait thats what makes an rc lol good work wouldn't want to get hit with it
@CongPham-oi6le
7 жыл бұрын
hey I'm interested in buying the RC. What would be the best way to contact you about it? thanks
@_Viking
7 жыл бұрын
No suspension and no diff makes it perform very poorly in the turns. Other than that it's a cool car.
@heliscat
7 жыл бұрын
Drive that shit, man! You could do the same shit with a Toys R Us car for a lot less!
@backyardbasher
9 жыл бұрын
gearing is too short
@daviddenison1526
2 жыл бұрын
Rear sprocket is entirely too big, I'd drop it by 8 or 10 teeth smaller.
@dlgarza5187
9 жыл бұрын
What kind of steering servo and throttle servo do you have on it? im trying to build one myself
@tasteharmony
7 жыл бұрын
Only disappointment, would have like to seen it with the hood on. Is it a Hot Rod???
@starguard4122
9 жыл бұрын
Did you make that vehicle yourself? If not, where can we buy one?
@spacial-active-machines
7 жыл бұрын
can you make a building plan? i think that manny people pay for a plan...best regarts from germany... i woud like to build this amazing RC vehicle....please make a plan with the components an tell me...
@robertclark4135
6 жыл бұрын
Jörg Ehrich it's a bar stool racer. just add servos etc..
@mikec4772
10 жыл бұрын
this needs a Torq A Verter . CVT drive and slightly taller gearing but very nice lob on the build .. doing something similar but with a 10hp tecumsah engine . I know what you used for frame same as I am doing just stretched mine and made it wider with custom wheel spacers I am shooting for 60mph with good take off ...
@iliaselangouri5965
10 жыл бұрын
What frame you used
@stahlbeisser7118
8 жыл бұрын
Awesome sound ! Great work !!! :)
@pioupioudu57780
10 жыл бұрын
hi you how to use your brain for direction for I find no thank you I'm French
@JettRhoads
8 жыл бұрын
Put a Conley V8 in it!! That would be super cool, but it looks good props to you man
@ROTAXD
7 жыл бұрын
Jett Rhoads Conleys are more for guys that want museum pieces. They make very little power. He's be better off finding an old 250cc 2 stroke air cooled snowmobile motor.
@mauricesj66
7 жыл бұрын
Poor choice of engine go pad engine with a jetpro pipe would of been my choice
@ayebee1207
9 жыл бұрын
I like it. Makes me want to put razor sharp knives[Spartacus} on the sides and drive it among pedestrians on a sidewalk!!!!!
@ayebee1207
9 жыл бұрын
+Aye Bee One thing though................I notice your testing it on a chilly day. Me, being the OCD A-hole that I am, I see you have removed the sheet metal shroud to: "aircool" the block and head. Whoooppss! This lil cart engine will not last long with a ring/bore seal on a 100F degree day. But that is just the HotRodder in me pointing out this to the guy still wearing his welders cap on test-day....................Heh-heh-heh!!!!
@andyman11862
7 жыл бұрын
hey you dont have to walk it like a dog and follow it around , its remote
@alexandrebimmers8317
7 жыл бұрын
God, the noise of a monocilynder 4 stroke 450cm3
@magia5035
7 жыл бұрын
COOL TOY MAN I BET YOU CAN DO ALOT WITH THAT. I WOULD PULL MY DAUGHTER.
@JuanGarcia-jv1xs
7 жыл бұрын
Make a couch with tayers and a string so it can push u like a boss
@turbulus
8 жыл бұрын
add FPV with head tracking!
@prestonrogers8350
7 жыл бұрын
off road tires and a turbo than it will rip
@MrDozer120
4 ай бұрын
Where do you get wheels and tires like that?!
@morris4069
7 жыл бұрын
Add a barstool and you have something fun!!
@andyman11862
7 жыл бұрын
think you should do sail boats with the elderly, at the pond
@l0m0c0np1m13nt0s
7 жыл бұрын
Pero dale cañaa!! Vaya aburrido que estas hecho
@jihopablopark3770
8 жыл бұрын
Do you still have it? I would like to buy it. how much?
@jonathanhernandez840
7 жыл бұрын
Que chevere quedo pero mi pregunta es como frena
@CVM222VOLT
7 жыл бұрын
Is a suspension in it's future ???
@fergusonhr
7 жыл бұрын
Get yourself a torque converter from go powersports
@murcone
7 жыл бұрын
I want to build one myself how do I do it message me
@jean-charlesbrun1447
7 жыл бұрын
avec ma merde a 150 euros je vais plus vite , mest toi le feu man !
@C-NoteMac
7 жыл бұрын
Build a full cage for it n jump the shit out it!
@rmckelvy15
7 жыл бұрын
What kind of motor is that pipe makes it sound good
@caydenthompson1878
7 жыл бұрын
Pretty damn cool but does it have a body cover
@ludojamara2690
9 жыл бұрын
5,5 hp is very hight powered or update the ratio
@roypatterson9910
10 жыл бұрын
You need to put a two speed gearbox on it!
@Spirited_Driver
10 жыл бұрын
Yeah, or even 3 speed (like some nitro rc's have), but i dont know where you would get an automatic transmission for this engine. I can only think of go-cart manual trans. My 1/8 savage rips around a lot quicker with its 3 speed and 3.5hp .28 (it also has AWD and adjustable suspension and adjustable abs brakes).
@roypatterson9910
10 жыл бұрын
Spirited Driver Yeah, I had a HPI, 1/8 scale Nitro RC 4WD car, I had a 2 speed transmission on mine, with a .20 OS Engine, that thing would spin all four wheels, and topped out at around 60 mph., I know it hit 60, because I followed it in a car, so I know it would hit 60 mph...and that was before I put the 2 speed gears in it, so I don't know what the final speed was at that time! I miss having it, I had to sell it about 8 year's ago! I paid $500+ for it, then I sunk about another $500 into it, I was always putting new tires on it! Lol. Did you see that guy who has a 1/4 Monster Truck called the Grave Digger, he has a small running V8 44HP engine in it, that thing would be cool to have, but those engine's aren't cheep, I don't know what the actual price is, but I know they can't be cheap!! You can see them if you look up the worlds smallest engine's!
@bis124
10 жыл бұрын
CVT gear box for the 5.5 HP Engine is easy to come by, The same thing as a snow mobile uses
@lukewest9361
7 жыл бұрын
cnwf0
@lukewest9361
7 жыл бұрын
ohfsowef
@homemadebym.m.3366
7 жыл бұрын
i give you 800 dolars for that thing
@dedskin1
8 жыл бұрын
ppl like the sound , has a real nice sound , muscle sound . and look , but it doesnthave shock absorbers. That would be even nicer . you can see it really needs them , its bouncing
@5C077Y5
8 жыл бұрын
no.. it sounds like a fucking lawnmower, NOT a muscle car! Duhh!
@5C077Y5
8 жыл бұрын
no.. it sounds like a fucking lawnmower, NOT a muscle car! Duhh!
@5C077Y5
8 жыл бұрын
no.. it sounds like a fucking lawnmower, NOT a muscle car! Duhh!
@dedskin1
8 жыл бұрын
some of it is there
@andrescarrera1244
7 жыл бұрын
sninc when does a Muscle car back fire
@jeremyhenderson163
6 жыл бұрын
Unfortunately trolls don't just live under bridges anymore,awesome craftsmanship and thanks for sharing. Any way you might share the electronics parts list?
@crazynoah7979
7 жыл бұрын
What's the intro song anyone????
@phmaximus
7 жыл бұрын
why on/off/on/off/on/off with the throttle??? its not a pump anyway... cool build... simple yet effective
@YOSRD
7 жыл бұрын
Mis une couronne plus petite tu auras plus de vitesse
@32davkav
7 жыл бұрын
put cats in the driver seats and race...
@jamesfleischmann3406
7 жыл бұрын
Cool idea but,id put a bigger 2 stroke engine in it to get WAY more power
@thisolddog2259
7 жыл бұрын
All these negative comments on this man's build from folks that haven't made a video of their own featuring their builds... Oh that's right....it's easy to judge what your unable to achieve! Very nice build brother
@johnnymouton853
7 жыл бұрын
that is so awsome whats ur prices on them
@pierpa_76pierpaolo
6 жыл бұрын
The go-kart style model is very nice and fun to drive in a square. I would like to buy it, but I would not live in the U.S. :(
@foellerd
10 жыл бұрын
Id put a much smaller sprocket on that rear axel. Would make it go faster. Im sure this guy already knows that. Maybe he wanted mad torque or something.
@bis124
10 жыл бұрын
smaller sprocket on the rear axel would decrees the top end and just cause it to wheel spin
@foellerd
10 жыл бұрын
I agree with that but I think the extra caution when taking off would be worth it to go faster. That engine is so big for that thing, I can't imagine it would have trouble getting up to speed. It's probably got a power to weight ratio of 1hp/10 lbs.
@nickkluger97
9 жыл бұрын
andrew blears What are you talking about. A smaller sprocket on the rear would make it faster! A larger sprocket makes it slower but have more torque.
@Gatorsrok
10 жыл бұрын
What kinda Frame did you use!!!!
@sammyboi5913
3 жыл бұрын
this would kill with a hotrod body!!
@quadsman11
7 жыл бұрын
What are your plans for any type of body ? And you are dealing with so little weight, you can easily step your ratio up. What kind of plans do you have for the little kart ? Pretty Kool Kart !
@lBadBoy1l
10 жыл бұрын
Double the length!! All these are setup like a square. Not many real world vehicles have there wheels at the four points of a square. Make it proportional to something. Sounds badass!!
@richardhenderson1755
7 жыл бұрын
Driverless gocart , boring.
@dspencer8827
Жыл бұрын
That is very cool ,i want one
@humblerc841
8 жыл бұрын
i have to admit it's really cool, but on that scale i think i'd rather build a kart i could sit in and drive. either way it's some pretty impressive scratch building. i'm sure it took a lot of work.
@ROTAXD
7 жыл бұрын
Great concept. Needs some refining though...suspension and a cvt setup would really wake the thing up.
@mguidice3287
9 жыл бұрын
I would give u 350$ for it
@andyman11862
7 жыл бұрын
just playing with ya , its a very built well , well done , i give you a A- sereously good job, take care
@ramonmejias2178
Жыл бұрын
Do you still have the car?
@woodrowmoore1980
7 жыл бұрын
Ohhhh I would love to see that with low profile tires with cool chrome rimes and an old school Volkswagen bug body would look soooo cool!!!
@bosco5652
6 жыл бұрын
Should have used a 2 stroke.
@Wildavismedia
4 жыл бұрын
I like it!!!!!!! Did Rc cars for decades and never thought of building my own!!!!
@dillontaylor5738
8 жыл бұрын
go to a go-kart track and race them
@Tommysmess
6 жыл бұрын
This thing is awesome. If it had a small sprocket on the back it would be very fast.
Пікірлер: 283