I tried many times leveling the bed manually, but after start probing and adjust Z and finally then test printing my print never stick to the bed then I repeated all the step found that the nozzle is away from the bed. it seem that after the Z offset move up after probing process.
@chrisnzog8643
Жыл бұрын
Nice and pleasant vid, like always
@Jim_One-wl4ke
7 ай бұрын
Looks like a good printer for entry into Klipper. As it’s going cheaper now. Does the machine comes with accelerometer or purchase separately ? I see this is the most important for quality print and my main aim of klipper control. Another thing is can we replace the screen with a TS35 touch screen with klipper screen to run it with? Thanks a well presented video and infos. ❤
@chalky3320
Жыл бұрын
Personally i think the manual leveling and springs on a printer thats suppose to be for fast printing is a bad choice. And i definitely hate the firmware on a micro sd card... God are we in 2003😂 Excellent review as always rui and Sandra
@looxonline
Жыл бұрын
Micro SD is the most practical since it allows for easy re-flashing if something corrupts. eMMC would be a challenge since it would require adjusting jumpers to get it into DD write mode for flashing. Bear in mind that we are talking about an entire linux operating system here and not just embedded firmware running on the MCU.
@andruszyk76
9 ай бұрын
Is there anyone here who can help me? I broke my SD card and I need help on how to create a new one to make the printer work again. please help.@@looxonline
@platongahhh3897
26 күн бұрын
Can u give me an orca profile of this printer please
@corlissmedia2.0
Жыл бұрын
The print head on the Hurakan is total junk. It clogs all the time. Changing it is very difficult given the confines of the enclosure. The solution is to install a REVO print head. But that isn’t easy for a number of reasons. You need a metal mount to get the print space the REVO took back. I modified a backplate I had to make it support the REVO. Then you have to edit the generic config file. BIQU will help, but their numbers are incorrect. My REVO is still 10mm to the left of the left side of the bed. The REVO with a high flow nozzle is great. I highly recommend it. But the REVO and the HF Nozzle will cost about $200. That’s more than half of what the Hurakan is selling for. It was a great new idea a year ago. Now we’re looking at the K-1 and the X-1 Carbon. This review is a year late.
@BuuFPV
Жыл бұрын
Z axis (when probing and homing) moves upward how to solve this problem? I just updated the firmware.
@landX
10 ай бұрын
Para mim é um dos melhores video a explicar o BiQU Hurakan! Obrigado Rui e Sandra! Mas,eu tenh um problema no Bed lelveling: Fiz e correu tudo bem, mas o Benchy não chegava ao fim,, porque o modelo começou a mexer... Que devo fayer?
@ruiraptor
10 ай бұрын
Olá, obrigado pelo simpático comentário. Se a peça se desloca durante a impressão, então significa que o Z-offset necessita de ser calibrado ou a pelicula da mesa está com fraca adesão. Experimente começar por calibrar o Z-offset primeiro e testar se melhora.
@landX
10 ай бұрын
Obrigado pela resposta. Será que devia comenta em inglês? Já tentei várias vezes o benchy, e salta sempre do bed, entre os 79% 83%. Já mudei a temperatura do bed 60, 67 e 70°C mas salta sempre. O meu filmament é um bocado rijo. Diz-lá para usar entre 190° até 220°C.
@ruiraptor
10 ай бұрын
Tente perceber exactamente quando ele salta. Por vezes, quando está a fazer o arco da cabine, o filamento depositado fica arqueado para cima, edurece e depois o nozzle quando passa lá para depositar a camada seguinte, bate nesse bocado de filamento e arranca o benchy.
@landX
10 ай бұрын
É exatamente isso: É quando está a fazer o arco da cabine, quando está a fechar o arco.
@ruiraptor
10 ай бұрын
Experimente baixar a temperatura do nozzle. O ideal era fazer uma torre de temperatura para esse filamento de forma a perceber qual é a temperatura ideal para ele.
@cynapsnet
Жыл бұрын
Where did you find the STL print for the ADXL345 to mount on the bed?
@ruiraptor
Жыл бұрын
Hi, you can find it here: github.com/bigtreetech/BIQU-Hurakan/tree/main/3D
@andruszyk76
8 ай бұрын
Is there anyone here who can help me? I broke my SD card and I need help on how to create a new one to make the printer work again. please help.
@tombo7719
Жыл бұрын
The assembly is wonky. Some solid stuff they are offering, but meh…
@andruszyk76
9 ай бұрын
Is there anyone here who can help me? I broke my SD card and I need help on how to create a new one to make the printer work again. please help.
@MohammedAlrubaie-cf3iv
9 ай бұрын
so am I :(
@FCastroGamer
9 ай бұрын
Don't bother downloading cause if the SD gets lost or corrupted then it's a mayor pain. Had to replace my biqu b1 cause I either fried the type c cable or part of the mainboard. Either get the ender 3 s1 wich is same price ($179) or the biqu bx ($229) or better if still in stock.
Пікірлер: 22