Watching this video in 2023 and see hwfar you channel has got and it's great
@40rtyp
8 жыл бұрын
"Thanks for watching, bye" lol. Every video
@BrazenBullXXX
7 жыл бұрын
Every time I hear that outro I think to myself: Perhaps you shouldn't say anything at all lol.
@tgirard123
5 жыл бұрын
Kinda tickles me when I hear it. It's that whole Napoleon Dynamite thing...
@wiredforstereo
4 жыл бұрын
It's that kind of terseness I find valuable in a human.
@jamesoneill1945
3 жыл бұрын
I find him calming and polite. :)
@jamesoneill1945
3 жыл бұрын
I cant help but feel most other youtubers over do everything
@animatedstoge8580
6 жыл бұрын
One of best rc flying channels carrying out flying tests in funny and scientific way
@bobmorris1493
11 жыл бұрын
I always enjoy your Videos.....Bob... Sydney Australia (My first RC flight 1966)
@philg6757
11 жыл бұрын
Thanks mate. I`ve just bought a Bixler as my first plane to learn with,nice and cheap. Perfect for the job. Look forward to seeing your ideal FPV rig cause that`s where I`m heading eventually.
@sn0wchyld
10 жыл бұрын
"according to MATH" LOL. Nice gear you've got mate. cant wait to get into fpv myself.. .
@serang
2 жыл бұрын
It has been 7 years, how are you doing?
@Ubernator
11 жыл бұрын
Wow seven miles. Truly awesome.
@tomar5e115
11 жыл бұрын
Whoever filmed that at the end Doddid a great job
@michael-tm2kb
11 жыл бұрын
Nice flight. I am impressed at your navigation - flying that far out without the help of a home indicator on your osd. Lesson to me to stop relying on that so much. good stuff...
@HyperJoe
9 жыл бұрын
Awesome Footage! Could make a commercial for the Bix!...lol Nice Ant. on the ground station.. :)
@jj01a
10 жыл бұрын
how do you like the yagi, is it a DIY project, if so where did you get the plans? what was you flight time. Would you benefit from a larger prop? Cool stuff, thanks for sharing.
@Aubatron
10 жыл бұрын
Is an FX-61 Phantom considered a good plane? Also, is it possible to get a FPV camera with better quality than the one used in this video? Any suggestions?
@cod4madass
10 жыл бұрын
I fly an FX61 with a cyclops storm. Flies very well and on a 4000mah i get about 40mins.
@wheelykingdotcom
10 жыл бұрын
thanks for posting this one and not taking 3 hours to explane it all. just what i need to know
@fluevedpeisen9971
8 жыл бұрын
Great videos.
@nucleo1772
6 жыл бұрын
Hi rctest...what battery I should buy to get solid 30min flying time with bix3 stock motor??? 4s panasonic li ion or lipo?
@raul7293
10 жыл бұрын
Nice footage!!
@joshmellon390
Жыл бұрын
Dude, you do all the stuff I wanted to do as a kid......... but now I do it while pushing 40, and life couldn't be better lmfao
@foamaxmore
11 жыл бұрын
You really took some chances with Quinn as a beginner lots of trust in her abilities..Great
@Sinkey101
11 жыл бұрын
Love your videos man, I wish i could make some of the planes you do, but money is kinda an issue there. Apparently RC is an expensive hobby XD
@chechubelo
7 жыл бұрын
can i have a complete list of all the equipment ? i want the ssme setup. thanks
@jimmbbo
10 жыл бұрын
Interesting!! If your goal is range, the major enemy is power drain, which is a result of motor/prop efficiency and drag.. . Suggest tracking down an efficient powerplant/propeller combination, a more efficient airframe (powered sailplane), and reduce drag as much as possible. At the scale speeds you're flying, anything hanging out in the breeze is a real killer. Also, if you really want to go to the max, the airplane's max range and max endurance occur a different speeds, and with the technology you have, you could be on the road to a real breakthru...
@thesherm44
9 жыл бұрын
"...according to math..." hahahaha
@Betruet
11 жыл бұрын
what video editing software do you use? i love your videos XD your slowmo ones are great
@rctestflight
11 жыл бұрын
you can increase the gain, or brightness but I just use it as a video splitter.
@rctestflight
11 жыл бұрын
The extra pin is for monitoring the voltage of a second battery.
@NorthAmericanRc
11 жыл бұрын
Nice Video thumps up
@hvFlateric
10 жыл бұрын
I have to second this recommendation. The radian offers (not the pro) alot of very substantial benefits for FPV. The polyhedral wing shape helps keep it stable and smooth. The folding prop allows you to pull the plane up high shut the motor down and stay up for very VERY long flights (My personal record was over 2 hours, was getting dark had to land). The plane has it's flexing issues that are easily solved. Power and porovided ESC have been great for me, however the BEC in the ESC is a little weak if you add any additional bit to the plane.
@hvFlateric
10 жыл бұрын
The one thing you may not like however is the plane is NOT a speed demon at all.
@michealstoneman
11 жыл бұрын
Nice job
5 жыл бұрын
Hi. I still flight my BIX3 almost all weekend and publish my videos about what a I learn with him and all can learn too. It's a great RC Airplane to learn, I say that in all my videos. The fact of BIX3 have landing gear is advantage in my opinion to learn to do great landings. And have Flaps... Be welcome and again, thanks very much for this review, best regards!
@mike_oe
10 жыл бұрын
Thanks for sharing. For improved speed and effiency, I'd suggest a prop with a larger pitch, say 8x5, 8x6, or even 8x7. You may also want to streamline the motor mount and add a spinner for the same reason. Check out the The EasyStar ll. It's 6X7 folding prop and integrated pod/prop/spinner is a really nice solution. In stock form they glide very well.
@AceCmbatguy25
10 жыл бұрын
I have an easystar 2, it hasn't even got 1 hour's flight time because of weather xD but i absolutly love plus it's easy to repair after a crash :P
@jumpinjordan1
10 жыл бұрын
Hi what kind of camera are you using and where can I find it?
@Nemesis1673
8 жыл бұрын
were s quinn?
@sc10rs
11 жыл бұрын
Nice vid mate :-)
@informalfallacies
9 жыл бұрын
Nice video. Thanks.
@jdattaway
11 жыл бұрын
What mods did you do to the motor mount to make it work with the 8in prop?
@jeffcolhoun
11 жыл бұрын
I dropped the 2200kv turnigy on mine and it was a rocket. Cut my efficiency down but if your looking for more get up and go its not a bad option. I used the stock prop. I also tried a 1400kv skywalker motor and a 9x7 3 blade and was bordering on tearing my wings off so theres that option too. Ive since moved to delta wings and have no intention of looking back.
@JohnSmith6875
9 жыл бұрын
Clips the wings. Less lift and weight carrying but more speed. Raise engine nacelle a little higher to allow for bigger prop. These are my engineering recommendations even though I don't know what the hell I'm talking about. :-)
@Rickycooke1gmail
9 жыл бұрын
simply mount as much crap internlly and it will be aerodynamic
@4168033000
9 жыл бұрын
Hahaha, I like it.
@theinnocent714
9 жыл бұрын
lol.."even though I dont know wth im doing"...lol
@jchtr3ac
11 жыл бұрын
If you watch Bruce Simpson's videos I think with the mods he made to the AXN, it flies pretty fast. I know he uses it a lot for FPV, although not as far perhaps. Worth a look as it is a fairly stable platform, inexpensive, and highly modifiable. Cheers
@LeeLaster
11 жыл бұрын
what transmitter were you using and did you enhance it's range in any way?
@jpoc5079
10 жыл бұрын
Great channel man, what are you running in the order of UHF?
@lifestylemedia1598
8 жыл бұрын
what kind of antenna did you use ?
@frankragsac5375
7 жыл бұрын
I love your video. Can you tell me what your ground station setup is?
@alancooper1387
7 жыл бұрын
What type of radio are you using?
@katanamd
11 жыл бұрын
Also a quick bit of info on propellers. Big flat props have great static thrust, but square props (As in: 7 by 7) are more efficient. Please give that a try for yourself :) Also I am not too sure about this, but I don't know if slow fly props are as efficient as the normal electric thin type. (Like an APC 7x7 electric) Thanks for your great videos and I hope I was able to help you!
@phillynn79
11 жыл бұрын
very cool
@freshwaterfish2012
11 жыл бұрын
Which UHF system are you using and why? Just starting to look at UHF and need one that is pretty much "plug and play".
@javieruriel
7 жыл бұрын
Hey dude where did you get The yagi antenna ?
@katanamd
11 жыл бұрын
I just test flew my FliteTest Versa wing I built for FPV this morning. I can 100% recommend it. I am flying with an Eflite 370 motor and the plane lifts a 2650 mah 3 cell without even thinking about it. I am sure it can carry way more even with my small motor. It's also nice and fast with crisp controls. If you want more info on it, I will post when i get a few more flights on it as well. I will also have a friend help me clock it with our speed gun.
@d.pigg1768
10 жыл бұрын
whats the ground antenna called and where can I find one?
@RobdroneMedia
11 жыл бұрын
Ritewing zephyr dude!
@Legacy0ne
11 жыл бұрын
Be interested to know what transmitter/receiver setup you are using, cheers
@sparkey044
11 жыл бұрын
What RC system for the plane are you using?
@DodgeDitchburn
11 жыл бұрын
Yep Bixler is great for some duration and easy FPV flight, but the same reason I switched to a flying wing, more speed. =] Try looking into the X-8 / ZII
@estevesbb
11 жыл бұрын
What did you for long range trasmitter?
@paintballingny
11 жыл бұрын
Hey rctestflight keep up the good work you're doing could you please inform me what type of fpv system you have onboard for the plane thanks
@paulmckenzie6008
10 жыл бұрын
"according to math".... lost my shit
@SimbaSoundPower
11 жыл бұрын
Thats cool flying. Would installing a solar cell on the aircraft increase the distance and efficiency? Even just a slight increase will be helpful on a light craft such as this I think.
@TevinP
10 жыл бұрын
thanks for watching bye.
@jessiemanaloto2534
5 жыл бұрын
How to make the set up electronics of cargo condor?
@knexfun
11 жыл бұрын
Is that a Yagi antenna on the ground station? Impressive flight by the way.
@opt123123
11 жыл бұрын
where did you get that yagi? looks nice
@foamaxmore
11 жыл бұрын
Great Flight and nice looking girl friend Quinn? Hope you both can do some new videos together I enjoyed this one a lot!!! I'm like you I like to fly and disregard details just as long as I can fly and do quick repairs.learning about xmitters and antenna combos to use that get longest ranges
@01VIPER27
11 жыл бұрын
Where did you buy that yagi antenna sir?
@rctestflight
11 жыл бұрын
oh yeah. Maybe ill try it out and compare. thanks
@uniaddict
11 жыл бұрын
dhdsracer also had a bixler 2 (bigger overall) and also fit 8000mah in the nose of that plane. itd be tough to fit that much battery into the bixler 1 and still have it properly balance out, although with some ingenuity im sure anything is possible haha
@flyboy6753
11 жыл бұрын
Does the 2.4ghz video equipment interfere with your 2.4ghz airplane rx/tx?
@cutefox8319
4 жыл бұрын
Not sure if this comment is actual anymore :D but i thought i could answer, yes, 2.4 GHz radio control will hitch 2.4 GHz video system. I was flying with guy, he had 2.4 GHz video, when i turned my radio on, he yelled like turn it off, fast! Hah.
@badkeene
10 жыл бұрын
Why is it too slow ? i like flying slow with fpv gear :)
@benfelland
8 жыл бұрын
That extended wing on one side of the bicker looks goofy, I like your set up tho.
@theinnocent714
9 жыл бұрын
tried a higher kv motor? I just assemble bixler v1.1 with a 2200 kv 40a esc...waiting for a good day to maiden
@rctestflight
11 жыл бұрын
No the problem is the airframe. In order to push that plane faster you would need more power and that would lead to shorter flights
@Vass881234
11 жыл бұрын
you obviously have no problem with FPV or Radio range, hope a suitable Platform is found soon. Good Luck will watch with interest.
@mr.sandman4782
11 жыл бұрын
Are you using 900mhz or 5.8
@2007crf450r
10 жыл бұрын
whats you favorite plane for fpv
@Ubernator
11 жыл бұрын
Can you make a video show casing exactly what you use for FPV? I am new to the FPV and I am not sure what to buy, and it looks like your setup work really well.
@wordreet
11 жыл бұрын
Streamlining the motor mount might help a little bit. ;¬) I've learned to fly with the Bixler2, but didn't like the canopy shape. So I replaced it with a simple piece of clear package covering which I just bent around the foam canopy base and glued in place to make a flatter wind shield shape. I'm sure it's slightly more streamlined but have no way to check. But, can you not get more of the FPV gear inside the fuselage?
@TheRadioControlKid
11 жыл бұрын
How did you remove the decals?
@paulkazjack
8 жыл бұрын
is this 3watts?
@carlocivicsi
11 жыл бұрын
you used dragon link uhf?
@geneticallyinferior1
11 жыл бұрын
the maneuverability advantage is not need in this application but the higher speed and possibly less drag might be. the axn has a smaller canopy area meaning smaller battery without major mods. making it bigger for larger payload (more drag) might negate the speed advantage
@stuz14
11 жыл бұрын
I Also found the Tower Pro Propellers to be A LOT more efficient than the Hobbyking turnigy, SF and GWS props
@novasmama8863
6 жыл бұрын
Thanks for watchingbye
@Ghostrider03Z
10 жыл бұрын
Does anyone have any experience with the epp fpv and a bixler type plane? Which is faster?
@CirrusLK
10 жыл бұрын
I'm pretty sure the Bixler is faster. I have on and it's pretty zippy. The EPP FPV is just so big and heavy right?
@ClosRC
10 жыл бұрын
Yea Bixler 1 has a 1800KV motor I believe and the B2 has 1300KV they would be faster than a epp fpv for sure.
@SeansLittleBayofHorrors
11 жыл бұрын
Clip a couple inches off the tip of each wing and add small depron winglets. That should give you the speed you want without sacrificing payload capacity.
@stuz14
11 жыл бұрын
I use the Bixler 1.1 and can do a 32km or 19 miles round trip on it. My setup is 50A esc (over kill) Turnigy 2836 1100kv motor 9x6 slow fly prop Zippy 5000mah 3S for electroincs 1000mah3s for video TX I used the 9x3.8 sf prop but found it was not as efficient for long range and only get about 2/3 the distance (I don't know why) but it was better for climbing than the 9x6 (I don't know why). my cruising speed was 45kph and only pulling 7-8 amps but top speed was 85kph.
@Eaglebone
7 жыл бұрын
Cut the dihedrals off the wings tips!!! ( leave at least 1.5" of foam from the control surfaces, trust me.) 5500kv motor and four 2 cell batteries stacked in series = scary af pylon racer. I trimmed up all my control surfaces with a hot wire and i was touching 112AS
@Johnellenberger1
11 жыл бұрын
I have seen the Finwing Penguin do 15 miles. Dont know if this would be cheap enough, but you can fit up to two 5000 mah 4 cells in parallel in this beast. Look for it at Ready Made RC. Hope this helps you out!
@marpatdan
11 жыл бұрын
Have you though of using a finwing penguin from readymade rc? I run one and its a great plane
@rctestflight
11 жыл бұрын
the bigger the prop the more efficient it is. I could probably fly for that long too without any fpv gear.
@LightViltsu
10 жыл бұрын
Where do I get the parts?
@UPINTHEAIRNZ
11 жыл бұрын
was this the bixler 2 or 1
@01VIPER27
11 жыл бұрын
I also noticed that you are using a MAC, I would like to know also how you use the laptop to use as a video recorder.
@andreatonani1138
9 жыл бұрын
Hey people can anyone teach me what do I need to set a long range fpv flight..... first I changed my 250 mw transmitter with a 600 mw .. than? what do I need.. thanx !!
@arendmookhoek4314
8 жыл бұрын
+andrea tonani get a sweet antenna on ure rx
@soulesperanza
11 жыл бұрын
you should go with a knurrus maximus platform!
@EnisudR
11 жыл бұрын
Have you ever tried flying out as far as possible, land and have a friend replace the battery for the return flight?
@RCllamadude
11 жыл бұрын
axn has a slightly higher speed (not much, but a little) but the main thing that is better about it is the maneuverability advantage it has over the bixler.
@rva1945
4 жыл бұрын
Nice location, where is it?
@rctestflight
11 жыл бұрын
Yes, 12dbi
@mtgobots9854
11 жыл бұрын
The problem isnt the easy star, its your prop/motor/battery combination
@DieterMe
4 жыл бұрын
You should use circular polarized antenna (helix) at base.
@flyworxaerial
11 жыл бұрын
i need an fpv plane for a range of about 6 miles. it need to be pretty fast and semi stable what would be recommended for me.
Пікірлер: 213