You're a good speaker and you sound like you know what you're talking about. Keep the videos coming--I'm subscribed!
@Dynamo55b
2 жыл бұрын
Much appreciated! Stay tuned, videos in production now.
@Boomsticker
Жыл бұрын
I took mine and cycled the action by hand unloaded without firing a shot- after cleaning it thoroughly using Ballistol. I have had no cycling issues, and didn't need to spend $$$ breaking it in.
@dh-cn3jz
Жыл бұрын
I'm going to try that. Thank you very much, mine was shooting but the shells kept getting stuck on ejection
@mcmelonmaster
3 жыл бұрын
I bought one and I love it. Excellent review.
@Dynamo55b
3 жыл бұрын
Thank you
@sluggou812beotch
2 жыл бұрын
How is your shotgun running after a year and how many rounds have you ran through it?
@Dynamo55b
2 жыл бұрын
@@sluggou812beotch it’s running just fine. Thing is beast… I have some videos coming after the new year for sure… I know I have been saying that for a while… but life happens and sometimes you have to reboot… but I have been taking a lot of notes from viewers and have lots planned for next season. As for the number of rounds… at best count 500 at least… mine is doing very well… smooth
@sluggou812beotch
2 жыл бұрын
@@Dynamo55b cool, thanks for the answer. I've got 500lbs of lead left and 10,000 primers. I've got a bunch of slugs and buckshot that could stand to have a new home embedded into the hillside and that dp12 looks like it might be the right tool for the job.
@ryanmoore4098
3 жыл бұрын
This thing’s a thumper for sure. Mine required a little breaking in. If anyone watching is having trouble cycling right out of the box don’t go online and right a bad review before doing research. I had to send about 20rds of high FPS 00-06 before the cheaper stuff worked. And work she does!!! Great video. The advice on lubricantiin was helpful for the novice like myself. Makes a lot of sense.
@Dynamo55b
2 жыл бұрын
I don’t know what it is… after a while the recoil softened up. My common sense tells me no, but it feels a lot better after 300 rds
@Astrocop17
11 ай бұрын
I heard about the cycling issues…. So I oiled my well, then cycled it empty (?) times while watching football to loosen it up…no issues. Lots of fun!
@bretcomstock2347
3 жыл бұрын
I've had a horrible experience with my Black Aces Tactical Bullpup Pro-Series semi-auto. The lower is injection molded and mine is warped so badly that the upper doesn't fit properly. I need to DRIVE out the takedown pins with a hammer and punch. The safety selector has a very high effort, partially due to interference from the warped lower. The trigger effort is extremely high. That's partly a common challenge with remote triggers on bullpups, but the lower warpage creates additional friction. It doesn't reliably cycle target loads. Even after a couple hundred rounds it fails to properly eject around 10% of the time. I contacted the manufacturer to fix the issues under warranty, but it took months to get a very poor response. The CEO's comment was, "Sir, it seems the gun functions proper, are we correct in that?" Clearly he and I have different opinions of how a proper firearm should function. I bought this for 3-gun competitions, but it's going to take a lot of work to get it where it needs to be.
@Dynamo55b
3 жыл бұрын
I'm really sorry to hear that. That's the first I have heard about something like that. Do you follow my Facebook page? I would like to chat to you there, HMU please
@danaquintel8384
2 жыл бұрын
Send it back, life time warranty??????????
@bretcomstock2347
2 жыл бұрын
@@danaquintel8384 They refused. I've since modified the gun to run flawlessly, even with lighter target loads, so if anyone has issues that the manufacturer won't fix you can contact me at Comstock Armory in South Lyon, MI and we can discuss options.
@Dynamo55b
Жыл бұрын
Your expectations of sub $400 gun are pretty high. But I get what you’re saying…
@radicalmoderate2730
3 жыл бұрын
I just bough this shotty seriously bout it today. Hope it works as good for me as it does for you. Great REVIEW
@jeremyreinhold3620
3 жыл бұрын
When I get the money I am going to buy one of these :P Thanks for the video bud
@Dynamo55b
3 жыл бұрын
Glad to help
@TheLongwolf14
3 жыл бұрын
Palmetto state armory right now is selling both the semiauto and pump for about 330
@megaeureka7fan
3 жыл бұрын
@@TheLongwolf14 i just bought one from PSA. GREAT DEAL ON THEM!! $399US when MSRP from BAT is like $599
@bigbadjohnpesek9894
2 жыл бұрын
I love my bullpup. When I got it I locked the bolt open for a month. Because I heard it loosens the spring up. Well when I finally took it out to break it in it fired everything I had. Which was 100 rounds of high brass and 100 rounds of low brass. With one jam and that was my fault. Now after seeing mine people around me want one.
@danaquintel8384
2 жыл бұрын
A cocked spring doesn't loose spring pressure, wives tail big time, it is the repeated compression and de-compression that takes away spring pressure. They over compinsate for this at manufacturer with little extra pressure when new so are just right after break-in!!! You got a good one that will shoot everything right out of the box!!! Lucky U!!!
@bigbadjohnpesek9894
2 жыл бұрын
@@danaquintel8384whatever it was it worked for me. If it hadn't been for that one round it would have functioned 100%. I see a lot of videos where they take these bullpups straight from the box and have 9 kinds of problems with them.
@kirenlatimer3541
2 жыл бұрын
Hi, Solid video. Which model Holosun do you have on that shotty, and which magpul mbus?
@beckyrodriguez5712
3 жыл бұрын
Also can you do a video on cleaning and lubricating the weapon .There are no videos on that.
@Dynamo55b
3 жыл бұрын
Take a look around my other videos. I am certain I already did that. Please subscribe to my contact for the latest videos
@ryanmoore4098
3 жыл бұрын
I need some advice and maybe a walkthrough too. If you found PM video please let me know.
@Dynamo55b
2 жыл бұрын
@@ryanmoore4098 I did a detailed cleaning and inspection video already… take a look at my video catalog.
@ryanmoore4098
2 жыл бұрын
@@Dynamo55b Your videos are very helpful and you cover things that so many people overlook! You are a dependable resource.
@VincitOmniaVeritas7
3 жыл бұрын
Ok, I’m convinced: going to buy one next week. Which brand are those 10 rounders? I believe the black aces tactical comes with only two 5-round mags.
@Dynamo55b
3 жыл бұрын
I have had success with MKA 1919 and even Promag... look at some of my other videos for a review on different magazines.
@ronobiousmaxima1235
3 жыл бұрын
Just paid mine off(layaway). ATLANTIC FIREARMS has a 2 pack of 10 rounders for 59.99 right now in stock.They were 79.99, i dont think there is a better price for the mags out there. ATLANTIC still has bullpups in stock also. Love those guys with 45 day layaway :)
@elijahclark6093
2 жыл бұрын
Pick my up this weekend. Pretty excited to add it to the collection. The air soft version of course. Only air soft. Dont want the atf to be alarmed.
@hippiehillape
2 жыл бұрын
They are atf compliant. Your attitude doesn't help the culture.
@elijahclark6093
2 жыл бұрын
@@hippiehillape the fuck are you talking about? They dont want us to have any guns at all.. have you not been paying attention?
@Packer1290
Жыл бұрын
Good luck with that airsoft the next time some gay rapist is kicking down your front door. LOL!
@Toastification
3 жыл бұрын
Well, I think you’ve done a fine job with just a hat-cam and a few boxes of shells. ( better than i would’ve!) I’m looking to pick one of these up. Heard some have cycling issues? Looking forward to more videos!
@Dynamo55b
3 жыл бұрын
Thank you for your feedback... some do perform better then others out of the box.... after breaking in they all seem to run reliably
@markzc6236
3 жыл бұрын
They have about a 100 round break in. I just got mine a few hours ago brand new, ill let u know how it goes 🤟
@velocitydreamer
3 жыл бұрын
@@markzc6236 How'd it go? Looking between this one and one other.
@markzc6236
3 жыл бұрын
@@velocitydreamer it is by far the most fun I have ever had with a gun. I put a real good red dot on it and mercy those slugs hit there target real dam well. The only down side is that at the moment the customer service is absolutely non existent. Also, getting a 10 round mag will be tough it only comes with 2 fives
@mederosalexis1
2 жыл бұрын
Great video, best I've seen so far. 👌
@Dynamo55b
2 жыл бұрын
Be sure to check out the rest of my video catalog! Thank you for watching.
@K03sport
2 жыл бұрын
Did you tear down and clean the gun prior to using it? I'm not sure how they leave the factory or what happens to them in the store; just curious if you did a thorough inspection of all the parts. Do you use a special oil for new guns?
@Dynamo55b
2 жыл бұрын
Lol watch my other videos on this topic. I definitely didn’t take it apart when new for myriad different reasons. There is some BS internet lore about this. Just shoot the thing and there is no need to lock back the action at all. Read your warranty information. Sure you’ll need to clean it later and you can do so once you know it runs fine. Using a new advanced lubricant on a new gun is honestly dumb. The thing will never break in because today’s lubes are so good. Run the factory generic CLP until it extremely dirty 300 rounds at least. Be patient…
@Beth-El
2 жыл бұрын
I love mine but using the 1600 fps rounds are killer on the shoulder, looking to get a drum next.
@Dynamo55b
2 жыл бұрын
I don’t know why but it seems to soften up the more you shoot it
@Darthdoodoo
2 жыл бұрын
The drum sucks in this thing u cant fit your hand on the grip cuz the drum is in your way. Save your money get the 19rnd stick mag its ridiculous and actually balances the gun out nice
@mikehoncho6460
Жыл бұрын
What mags do they take?
@cooksey47
11 ай бұрын
Good video my guy! I like it 👍
@dh-cn3jz
Жыл бұрын
I've had problems with mine FTE cartridges would not eject all the way, probably the federal ammo I was using I bought some better ammo, I havent had time to test it again. I only got about 10 rounds before I got fead up with it
@Darthdoodoo
Жыл бұрын
When u get it rack the action a few hundred times by hand and then leave the bolt locked open so it breaks the spring in a bit. Try not to use anything under 1100fps and its a sick lil beast
@100fredkrueger
3 жыл бұрын
Did you break it in with slugs? I tried 10 rounds of 1350fps monarch dove loads and it failed to eject 3 different times. Not too happy about it.
@Dynamo55b
3 жыл бұрын
I broke it in dirty and was running 1200 low brass all day. On the day of recording I only shot a few slugs. The rounds you saw me shot here was my break in. Keep shooting it dirty, that for me worked perfectly. RIA VR80 manual says 200 rounds for breakin but I believe and have observed that it should be much higher then that... In my opinion you need at least 300-500 rounds. Don’t give up and hit me up if you still have problems. How many rounds to you have it it now?
@100fredkrueger
3 жыл бұрын
@@Dynamo55b thanks for the reply. I have only 40 rounds through it. I shot 15 rounds of Remington 00 buck and it ran great. It only had issues with the dove load. I’ll keep shooting some bird shot through it dirty until I get a few hundred rounds and hopefully it will cycle everything fine. I’ll let you know how it goes.
@prfwrx2497
3 жыл бұрын
@@100fredkrueger ammo's expensive these days, try keeping the thing with the action locked open over a weekend and see if that helps.
@willclark5075
3 жыл бұрын
@@prfwrx2497 The spring! Interesting. I'm trying this. Thank you
@rickyp4573
3 жыл бұрын
@@100fredkrueger they also recommended breaking in with 3” rounds before cycling 2 3/4 ..
@chief2508
3 жыл бұрын
I have the same shotgun. I haven't tried slugs yet. Which choke were you using?
@Dynamo55b
3 жыл бұрын
Cylinder choke...you don’t want to use a tight choke with slugs
@PatriotPilot747
2 жыл бұрын
I have had numerous problems with feeding.It could be magazine problems. I’m still trying to figure it out. Right now it just isn’t reliable. I have the most problems with the 10-rd mags. I’m using Black Aces shells.
@alexquiton7279
2 жыл бұрын
I was just holding this one at the store two hours ago! I want it soo bad !
@ThePreachaMane
2 жыл бұрын
I just bought one a few hours ago lol
@ThePreachaMane
2 жыл бұрын
@Rob Roy yep and I love it man. This is my keeper for ever non negotiable!
@_Dennis2Society215
2 жыл бұрын
Just got mines yesterday 😊
@onetimeoutdoorsdj1394
2 жыл бұрын
Just that a curiosity are you at alcheneck state park
@Dynamo55b
2 жыл бұрын
Augusta GA
@powerplayersonline7022
Жыл бұрын
Great work. I just got one of these with 2, five shot clips. I wanted to do a review and get a 20 round drum but I am not sure if it would jam. Troy T aka DirtyRize the Editor Power Players Magazine.
@jeremyreinhold3620
3 жыл бұрын
Hey man. How many rounds do you have through the fd12 at this point? And does it still perform?
@Dynamo55b
3 жыл бұрын
Nearly 1000... suppressed and open... no issues with mine
@jeremyreinhold3620
3 жыл бұрын
@@Dynamo55b Thanks for the info man. Bout to pull the trigger on a grey and green I think. Love the design and hopefully cant beat the relibvility. Ty again
@jeremyreinhold3620
3 жыл бұрын
@@Dynamo55b What kind of loads do you feed this thing? 1400+? Wont cycle anything except 3" remington magnum buck shot. I realize theres a break in. Just curious. I think Im about to buy some of the black aces 1600 fps slugs to break thing thing in fully
@Dynamo55b
3 жыл бұрын
@@jeremyreinhold3620 mine cycles 1200 all day no problems. I used the dirty break in method by not cleaning or “degreasing” it and it runs perfect. If you cleaned it out of the box as some have suggested and re-oiled it it’s probably not broken in in yet... the purpose of breaking the shot gun in dirty is to PROMOTE wear of the parts that NEED smoothing. After proper break in dirty then clean and oil as normal... try running it completely dry and run it dirty for 100 rounds... sure you’ll have malfunctions but that’s part of the break in process.
@Dynamo55b
3 жыл бұрын
@@jeremyreinhold3620 hit me up in the Facebook group if you need more help
@sgtmarine2006
3 жыл бұрын
I just got mine a few days ago. Been looking for a sight for it. Any suggestions? Another video said he has trouble with the sights he usually mounts.
@Dynamo55b
3 жыл бұрын
Well I only have the Magpul MBUS ones so they work for me...
@100fredkrueger
3 жыл бұрын
I am using a sig Romeo 5 and it works great. Those things can take a beating.
@sgtmarine2006
3 жыл бұрын
@@Dynamo55b I really like the magpul MBUS. Any issues with them coming loose?
@WillysOverland
2 жыл бұрын
@@100fredkrueger The romeo 5 or the romeo MSR would be a low cost excellent sight for this. The MSR is 89.99 at Palmetto State Armory right now for xmas abut does not have the shake awake like the romeo 5.
@jerwyn1636
3 жыл бұрын
Hello. What sight were you using. Im looking for one
@easilyDatabased
3 жыл бұрын
Why the blue painter's tape on it bro? ...and you said, the one mag is from/for the VR 80 and it works well too? Thanks!
@Dynamo55b
3 жыл бұрын
I don’t know why I put the tape on there... kinda silly 😁 Both mags run fine..
@johnmorales1030
2 жыл бұрын
Can you tell me what kind of flip up manual sights are you using with the Black Aces FD12?
@Dynamo55b
2 жыл бұрын
Magpul
@IceBite49
3 жыл бұрын
Bought one and put federal shells through it, failed to eject shells 75% of the times. Currently looking for better brand to put through it.
@Dynamo55b
3 жыл бұрын
I don’t think ammo if the problem... manually cycle it about 100 times.. make sure the bolt carrier is welded straight too
@suzukivstrom2304
3 жыл бұрын
You need to put about 300 round through it to break in. Also, disassemble and remove the factory grease then relube with gun oil.
@WillysOverland
2 жыл бұрын
Fairly impressive!
@jerrywebster7689
3 жыл бұрын
I’m thinking maybe dropping some oil on the side where the charging handle is and in the mag well on the bolt carrier. What do you think?
@SaltyRNFrank
2 жыл бұрын
your weapon isnt back on Safe when ya Reload ? Drill Sgt wud EAT U Up. And Kick Ya OFF The Line . Ty 4 the Vid
@frankbiz
3 жыл бұрын
Awesome!!
@markgallarzo5628
2 жыл бұрын
What was the first type of ammo you ran through? It didn't look like it had much recoil
@Dynamo55b
2 жыл бұрын
Don’t remember but probably some Winchester white box
@jerrywebster7689
3 жыл бұрын
Dynamo , I can lube my AR without taking it apart .Can this bulpup be done too? It would help me a lot , thanks
@Dynamo55b
3 жыл бұрын
For quick field lube... I suppose.. but you got a lot more friction points on the FD12
@chenyung6449
3 жыл бұрын
Many have noticed not to slap the magazine onto a new fd12. It’ll cause some issue with feeding. It happen to mine today. otherwise a great shotgun.
@Dynamo55b
3 жыл бұрын
No… I don’t have that issue
@PaulNewfield-PasadenaCAU-wb4xg
3 жыл бұрын
What part of Georgia are you in, I’ll be moving to Villa Rica, and will need a good gun range?
@Dynamo55b
3 жыл бұрын
Augusta
@kendrelljk
3 жыл бұрын
Shot Spot in Carrollton, GA Stoddard’s In Douglasville, GA
@PaulNewfield-PasadenaCAU-wb4xg
3 жыл бұрын
@@kendrelljk thanks, I’ll look them up!
@benjaminkelly9772
Жыл бұрын
Ur better than me I clean my clean/oil my guns before I first shoot
@Dynamo55b
Жыл бұрын
Yes
@osubigrob
3 жыл бұрын
Any thoughts on using a Holosun 510c elite with a quick detachment on this weapon?? Mine just shipped out.
@Dynamo55b
3 жыл бұрын
Should be fine… for a SG you want a good open sight
@johnmoorefield76
3 жыл бұрын
Curious as to why you taped over the name & model of the gun, yet, you didn't tape over Holosun on the red dot!! Out of the thousands of KZitem videos I've watched, that's a first! Nice video, though.
@chado1984
3 жыл бұрын
I just got mine a few days ago which attachments do you have on it ??
@Dynamo55b
3 жыл бұрын
Mostly stock... what do you mean by attachments.
@chado1984
3 жыл бұрын
@@Dynamo55b actually I just want to know which sight or red dot is that your using ?
@Dynamo55b
3 жыл бұрын
Just Magpul MBUS, Holsun Redot
@thelatearthurmorgan6158
3 жыл бұрын
Let's go Brandon.
@jaddcrey8403
Жыл бұрын
It's that a steel frame or polymer?
@Dynamo55b
Жыл бұрын
Poly lower… aluminum upper
@hag32581
2 жыл бұрын
What red dot were you running on it?
@Naginc
3 жыл бұрын
The reason he's "breathing heavy" is because this shotgun ISN'T comfortable at all. My buddy who's an special forces retiree, shot it several times and said hell no. I'm 6'2 250lbs, athletic, and you feel like your shoulder is coming apart. With the new recoil designs by Beretta and Benelli (same companies) there are way more comfortable designs. I love the look and the concept, but its not comfortable at all.
@keith0677
2 жыл бұрын
I found mine comfortable to shoot. It had less recoil than my ksg pump action which is to be expected. i'm 6 feet tall and a little heavy. I shoot a lot of shot guns so that may be the difference,.
@FocusedHands
2 жыл бұрын
what kind of sight is that?
@southernohiomopar7758
3 жыл бұрын
Is this the same generally as the TR Imports Evo-BT? As far as operation and takedown?
@Dynamo55b
3 жыл бұрын
Nope... the quality is far superior... is saw TR EVO at a gun show...held it for 2 minutes and was not impressed with the metallurgy and fit and finish... hard pass for sure.
@danielmoore1340
3 жыл бұрын
What are you shooting slugs?
@VoDKa-pd1tf
3 жыл бұрын
Cool
@Dynamo55b
3 жыл бұрын
Indeed!
@jeffreynye3019
Ай бұрын
What's the tape for?
@FC2ESWS
3 жыл бұрын
Nice shotgun, just bought one. Do the mags drop free? Looks like you had to pull them out
@Dynamo55b
3 жыл бұрын
Well your eyes done deceive you… I took a semi course sanding sponge to the inside of the magazine well and it made extraction smoother… I don’t see the point in 100% drop free on this platform.. I mean the ejection lever is right there next the magazine
@keith0677
2 жыл бұрын
Mine don’t. It’s my only complaint with the gun. Magazines should always drop free for quick change out. I’ve read others with the same complaint. It’s not a deal breaker though. Over all I like my fd12 quite a bit
@Dynamo55b
2 жыл бұрын
@@keith0677 I actually had some very good results using a course first then a fine sanding sponge. It fits in the magazine well perfect for a good 360* scrub. Test often and try different mags because you don’t want it too loose. Also remove the safety catch or press it down… you don’t want to sand that. The plastic comes off easy so check your work… you definitely want to add some water to the sponge too… I have mine just loose enough when I just assist the magazine out rather then tugging it out.. yeah I agree it’s far too tight. Now if it could get the bolt catch to work better…
@FC2ESWS
2 жыл бұрын
@@Dynamo55b I agree that bolt catch is iffy.
@rickyp4573
3 жыл бұрын
Did you break in with 3” ? Then use 2 3/4?
@Dynamo55b
3 жыл бұрын
First 2-3/4... then some 3inch just to try it out
@nortexican7521
2 жыл бұрын
What site were you using??
@Dynamo55b
2 жыл бұрын
Holosun
@anderska
3 жыл бұрын
What’s the difference between the first gen & the pro series ?
@Dynamo55b
3 жыл бұрын
I discuss this in a later video but basically the first Gen has benelli mobile chokes and a different hammer design. The second Gen uses Mossberg and has a heavier hammer for more reliability...
@anderska
3 жыл бұрын
@@Dynamo55b great thanks! I’ll check out the other video also
What’s the difference between this and the one that has the charge on the handle?
@Dynamo55b
3 жыл бұрын
Have no idea what you are talking about
@willclark5075
3 жыл бұрын
Finally got mine out for range day. I fear it's gonna be a long break in process. Jambed every other shot. Winchester and Federal loads, it didn't like anything I had to throw at it. 20 round drums don't work well at all. (Promag... So yea) Factory mags worked, sometimes. Disappointing day at the range. Man it's gonna take a lot of dirty dirty rounds to break this in. Also searching for a stock pad, this thing is brutal. All this would be worth it, if it would just cycle rounds 😒
@Dynamo55b
3 жыл бұрын
I had it very easy... I kinda wish I had a more difficult time so I could actually diagnose more of your problems. As an outsider, all I can say is. use more cheap rounds then expensive ones to power through the dirty break in. Please look for shiny track lines as they develop. Those are good... gouging, and large shavings are probably not normal. I also had some heavy recoil when breaking in... I really thought it was just me... thank you for that detail. The hard recoil did go away...So that said... I think the malfunctions could be related to the spring...HMU on facebook I would like to talk to you there.
@mcmelonmaster
3 жыл бұрын
I thought mine was defective until I ran high brass loads. It won't feed anything low brass. When I started using buckshot and slugs it ran flawlessly.
@rickyp4573
3 жыл бұрын
Did you put 2 3/4 round ? I herd of you don’t break in with 3” you can have cycle issues ..
@willclark5075
3 жыл бұрын
@@Dynamo55b Bro I'd holler but FB is the devil and I don't use that shit.
@willclark5075
3 жыл бұрын
@@rickyp4573 I used 2³/⁴" and 3". I've been out many times now with not much luck. High bread runs better, but this firearm was advertised to cycle all rounds. I've seen people have more luck than others. I've locked the chamber open for a month, gonna try it soon. If it doesn't works, I'll melt it down and fire it back to it's creator.
@masedadsgamingadventures6556
3 жыл бұрын
What’s the difference between the pro and standard?
@Dynamo55b
3 жыл бұрын
As far as I know both the pump and semi are under “pro” moniker.
@blondeblue32
3 жыл бұрын
I have seen in other videos that the standard had an aluminum slide internals, and the pro series was steel. Pay the extra money and get the steel one.
@benparadude2028
2 жыл бұрын
It will definitely be a great crowd pleaser……🤣
@Dynamo55b
2 жыл бұрын
Love this platform… more new content is coming soon… please hang on there for me…
@beckyrodriguez5712
3 жыл бұрын
To loctite the safety switch do I need to take the whole gun apart. Meaning is there a nut on the end. That I need to worry about coming off .
@Dynamo55b
3 жыл бұрын
You won’t need to disassemble anything other than the one torques screw that holds the safety on
@AJB.YUNGBULL
3 жыл бұрын
What flashlight can fit on the fd12?
@jerwyn1636
3 жыл бұрын
Where would I get a barrel shroud for this?
@Dynamo55b
3 жыл бұрын
It has one already... what happened to yours?
@jerwyn1636
3 жыл бұрын
@@Dynamo55b I bought mine in Canada it come from a different company. It uses a nut instead of the barrel shroud to hold the receiver and parts in place.
@sermike16
2 жыл бұрын
I was an inch away from buying this until I noticed the reciprocating charging handle. Bummer
@Dynamo55b
2 жыл бұрын
SCAR, AK, M1, all have reciprocating charging handles… it’s a nonsensical issue…
@brianspeirs4009
3 жыл бұрын
Panzer Arms 10 round magazine works on VR80
@brotherzion4706
3 жыл бұрын
How much for the shotgun bullpup?
@PaulNewfield-PasadenaCAU-wb4xg
3 жыл бұрын
$699 or less if you find a sale!
@floydfitzgeraldjr6390
3 жыл бұрын
i didnt know u can shot 3 inches in this? i thought was only 2 3/4
@Dynamo55b
3 жыл бұрын
Says right on the gun its chambered for 3inch... which means it will shoot 2-3/4 as well
@miguelvalle5191
Жыл бұрын
You should really practice safety selector swing manipulation when transitions between magazines and not leaving it on fire.
@juanmarin1565
3 жыл бұрын
What site you got
@Dynamo55b
3 жыл бұрын
🔴
@juanmarin1565
3 жыл бұрын
@@Dynamo55b what brand and do u got a link to it?
@Dynamo55b
3 жыл бұрын
@@juanmarin1565 holosun
@apelnkn2230
2 жыл бұрын
Nice review "should really use eye pro" notices puma slides... just pulling your leg man lol
@grootgroot9888
2 жыл бұрын
I bought one abs immediately mag dumped 😂
@lappieslabuschagne2428
Жыл бұрын
Exelent gun. Have one aswell. No issues , but i think the maker of the video should stick to an AK. This shotgun is obviously too much gun and not for him .
@Ace-ix9bq
3 жыл бұрын
Any one know what the trigger pull weight is?
@NumberedK.
3 жыл бұрын
I heard someone say they’re over 6 pounds I think
@Dynamo55b
3 жыл бұрын
More like 9-10 pounds... they are quite heavy, but this is typical for Bullpup
@sheLOVEScjay
3 жыл бұрын
Can an 18 year old own this?
@johnjinglehimmerschmitt9802
3 жыл бұрын
Yes
@grantwilson8169
2 жыл бұрын
How to keep your gun working forever. Lay it in the dirt.
@Dynamo55b
2 жыл бұрын
How to say you’ve never deployed to combat in one expression…
@grantwilson8169
2 жыл бұрын
@@Dynamo55b never claimed I have. Also from what I witnessed this is not a combat zone.
@harleygrit5358
3 жыл бұрын
if you need a scope with a shotgun, you really need a rifle. A defensive shotgun Is for close-in use! You probably won't have enough time to site in a target! Shotguns are point and shoot NOT AIM and shoot!
@Seniornuggets
3 жыл бұрын
stupid
@harleygrit5358
3 жыл бұрын
@@Seniornuggets apparently you've never shot a gun. When you're old enough and your daddy lets you, you'll know what I'm talking about.
@jwongss9287
3 жыл бұрын
but this one can shoot far enough to kill.. so it’s not a problem to train it up a bit right?
@Seniornuggets
3 жыл бұрын
@@harleygrit5358 you stupid old man, by your logic why have a sight on any firearm? yOu WoNt HaVe TiMe To AiM. Its a firearm. Put it to your shoulder and aim.
@dr.burtgummerfan439
3 жыл бұрын
At typical home defense ranges, even with a cylinder bore the wad hasn't even had time to open up. You're essentially firing a bigass rifle. So yeah, you have to aim.
@smokeyjo5485
3 жыл бұрын
Just paint yourself White 😅🤣
@soundthatpleasesme
3 жыл бұрын
Paint yourself STUPID.
@smokeyjo5485
3 жыл бұрын
@@soundthatpleasesme ok black European 😂
@soundthatpleasesme
3 жыл бұрын
@@smokeyjo5485 Thanks for your reply. But I am puzzled by it. You wrote, "ok black European " When you say "ok" does that mean that you are going to paint yourself stupid? That's good. As for "black European" where did that come from? I'm white and American. Now correct me if I'm wrong, but from your comment to that guy doing the review (can't remember his name), I would guess that you're a young white guy, not well educated, below average IQ, with low self-esteem and a low paying job if you even have a job at all. Obviously a racist, who pitifully tries to make himself feel better about his own self by denigrating people of other races and nationalities. Pretty accurate description? Open your mind, son. Try to look at things from different angles. By the way, I much prefer the IWI Tavor TS12 to that Black Aces FD12.
@smokeyjo5485
3 жыл бұрын
@@soundthatpleasesme if it wasn't for his hands I would think he was a European 😂
@soundthatpleasesme
3 жыл бұрын
@@smokeyjo5485 NEWS FLASH for you, Einstein. There are black Europeans.
@dalegendarysmizzy961
3 жыл бұрын
Use lighting next time
@Dynamo55b
3 жыл бұрын
Brother I’m not monetized and this is not my profession... if you want to help out, it would be appreciated ..
@appledapper
3 жыл бұрын
so much sand
@danielmazzola5386
3 жыл бұрын
If you were just a little more confident and familiar with firearms, you might produce a good video. A for effort. C for ability...for now
@Dynamo55b
3 жыл бұрын
Damn you got me... if only I would have spent just another decade in the light infantry ... but sure thanks
Пікірлер: 226