Man you made my day! Guys at work keep asking what brand they should buy and I've been steering them towards the badger patriot but the price keeps going up on them.
@christopherscott934
4 ай бұрын
Or....you could forget this thing and get the Mr. Hobby PS-289 0.3mm for around the same price.
@TheCreativeCollector
4 ай бұрын
There's a lot of choices!
@57heavenairbrush
3 ай бұрын
Amen! The ProCons (Mr. Hobby) are really Iwatas, solid, nice weight…SprayGunner has em for $77 not much more than the Black Widow..and so far i’m saying mine is garbage…cool looking but garbage!!
@azarelthecreator7098
3 ай бұрын
I just picked this up. Its nice. The trigger on my iwata eclipse is so smooth after pulling this one. I think im going to polish the ball it rolls on to make it smoother.
@azarelthecreator7098
3 ай бұрын
After trying this out i took it back. The trigger is terrible for fine detail work. There is a noticeable lag both before paint flows and when you release. There is so much play in the trigger its literally impossible to do fine detail work with it. I used the money that i got back from this and just bought a sotar 2020 since ive wanted one for ages.
@azarelthecreator7098
3 ай бұрын
You also wont get fine lines unless you renove the cao andbget really close. This is with all airbrushes. Those lines arent even close to as small as they can be even with a .3
@TheCreativeCollector
3 ай бұрын
Yeah my audience doesn't generally get too technical. They mainly want to see simple functionality.
@Sargentdigitaldesign
4 ай бұрын
I need to find that soon
@rmax5150
2 ай бұрын
Solid honest review. Well done, sir! Thanks for taking the time to share this product!
@johnp6269
3 ай бұрын
The warranty sucks, if they can't stand behind their products whats that say, The cheap throw away brush has a better warranty. I guess you can make your own warranty when it breaks on day 100 you can just buy a new go back a week later with the garbage!!!! I'd have both if they gave it a year, the Gaahleri airbrushs have a year warranty and they are awsome and their customer support act on the dime, there are extra parts galore just picked up ghad39 normal 50 bucks but caught a 29 sale so I bought 4. They compare to my gsi creos airbrushes with if ya spend just a little more they have a 5 year warranty.
@TheCreativeCollector
3 ай бұрын
Well hopefully they stand behind it. It's a fairly new brush so we'll see.
@Route66Wanderer
3 ай бұрын
That’s not paint on that airbrush, it’s anodized aluminum. Thinner or any other chemical isn’t going to remove it.
@TheCreativeCollector
3 ай бұрын
Well thats good to know.
@57heavenairbrush
3 ай бұрын
I got mine a few weeks ago and have put it to the test on a mural job….my consensus? Garbage…..great looking garbage….i used the .3 tip it came with and it worked ok once or twice…the next time I used it? Clogged….everything was clean but it wouldnt spray…i changed it to the .2 tip and it did the same thing…my Iwatas and Mr. hobby’s don’t behave like this! Even when i forget to clean the cup the night before they still spray great! Save yourself the $70 and upgrade to the PS-289 Mr. Hobby that #spraygunner sells, you’ll thank me later?!! Oh and don’t get me started on the Black Widow compressor 😬😡
@TheCreativeCollector
3 ай бұрын
Man that sucks. I haven't had any problems with mine so far. No clogs or anything. Maybe I'm just lucky?
@57heavenairbrush
3 ай бұрын
@@TheCreativeCollectori wonder….neither .2 or .3 will spray right now…and this is only Createx and Golden High Flow Acrylics….i dont have time to mess w this thing…my Iwatas dont act like this!!! Time for a refund and go get another Mr. Hobby at #spraygunner!!!
@57heavenairbrush
3 ай бұрын
Oh and the matching compressor is put putting its way back to HF for a refund as well!!
@TheCreativeCollector
3 ай бұрын
@57heavenairbrush I never got the compressor since I have like 3
@57heavenairbrush
3 ай бұрын
@@TheCreativeCollectori have like 8!
@siniestro0239
4 ай бұрын
Just because of the lack of parts I may not get it, instead I would get an Iwata for the same price but thanks for the review. next time I'm at Harbor freight I'll check it out.
@stylles614
26 күн бұрын
Great review, I see you have what look like a paint both with lights on it. Where can that be purchased at or if you build them, how much
@TheCreativeCollector
26 күн бұрын
The booth I have can be purchased through Gallheri on Amazon
@zCreepingDeathz
4 ай бұрын
Airbrushes do make a difference, I just started using an Iwata Eclipse (about $130.00) and wow, light years better than my Gahlerri Ace or Paasche Talon.
@TheCreativeCollector
4 ай бұрын
See....I've used that one for a bit and didn't see a big difference. 😕
@zCreepingDeathz
4 ай бұрын
@@TheCreativeCollector The biggest thing I noticed was the precision of the trigger, the control you have over the amount of paint released is the biggest difference, very precise.
@bobhadababy6970
4 ай бұрын
I definitely agree, I've been using a few different moderately priced rigs for the past few years with minimal progression until doing the same. I, too, finally ordered an iwata and have been using it for a couple of weeks now as you have, and the difference is like night and day for me. The response and control are awesome, and the nozzle setup cleans up and flows so much easier and better. I now find myself wishing that I would have just bought one to begin with like I originally planned. HP-BS with small non-removable 1.5 cc cup. I love it, and that's no BS. 😏✌🏻
@zCreepingDeathz
4 ай бұрын
@@bobhadababy6970 You're right, they clean so much faster and never really clog like my others do.
@johnp6269
3 ай бұрын
I have a few talons and couple visons they are all just as good or better then the iwata I go to my vison for detail over my iwata are you sure it's not user error?
@dwoodworker1
4 ай бұрын
Nice looking airbrush for the money however the lack of being able to buy needles and nozzles o rings and seals will prevent me from buying it. needles and nozzles usually can get damaged and having extras on hand is a must.
@TheCreativeCollector
4 ай бұрын
I was told by the company that you can order parts online.
@tbrew1
4 ай бұрын
Creative Collector, Uncle Jessy finished his 7'0-foot Magento figure, how's things going with you? Would the model be the Punisher?
@TheCreativeCollector
4 ай бұрын
That one is yes. I'm currently working on my life-size Punisher too.
@darren990
4 ай бұрын
My fishing rod is called black widow lol
@azarelthecreator7098
3 ай бұрын
I believe with these removable cups that you can keep the cup off for fine detail work and put some drops right in so there is no obstruction of your view.
@TheCreativeCollector
3 ай бұрын
Absolutely.
@mike-u5y7t
4 ай бұрын
Certain colors will be harder to see on it.
@darrellhood5430
4 ай бұрын
I'm gonna have to check this out
@HobbyistPrinter
4 ай бұрын
I don’t even care if it’s good. I like that it looks cool lol
@TheCreativeCollector
4 ай бұрын
It definitely looks cool. lol
@xicuter
4 ай бұрын
Nice vid as allways. This mite be the upcoming airbrush i will get if its avalable over seas. Love the look of it. Hm btw here is a oftopic when u hollow ur models what is ur setting on the wall at ? Duo to u dont cure it on the inside ? Keep the vids coming :D
@TheCreativeCollector
4 ай бұрын
I usually thin my walls at 1.8mm
@xicuter
4 ай бұрын
Oki thx alot will try it to at 1.8mm and see if its able to cure inside of it i dont have any uv flash light only curing station
@gjones002charter
3 ай бұрын
you didn't show how to clean it...
@TheCreativeCollector
3 ай бұрын
That's something you should already know how to do.
@kevinkerlin5603
4 ай бұрын
Looks like a nice brush visually.
@TheCreativeCollector
4 ай бұрын
It is. I've been painting with it and it's a good one
@garryloughrey8390
4 ай бұрын
Needles are .2. And. .5
@TheCreativeCollector
4 ай бұрын
According to the front of the box it says .2mm and .3. There's no mention of .5mm
Пікірлер: 52