So if you are hosting a LIVE cast at lets say a board meeting and you have a couple of cameras connected via HDMI and a laptop (powerpoint) and the client wants to play a DVD video from a DVD player.... even though the DVD player has an HDMI output it will NOT work right? You would need a scaler? Unless of course they can fire up the DVD/Bleu ray video from a laptop computer...is that right ?
@DaylightDisinfectant
10 жыл бұрын
I bought an Atem television studio and found this useful in terms of what it won't do. Thanks for making the video and sharing information.
@HollywoodConnection-jast
9 жыл бұрын
can this unit allow an alpha channel to be layered over video like if you wanted to add a bug or a logo in the corner of the screen??
@yorkie984
10 жыл бұрын
I'd be interested to know if there's a simple way to lay a DOG over the main output and maybe be able to control it's opacity.
@cnguyen32
10 жыл бұрын
Are you able to run long HDMI/SDI cables with this unit? I've read that the cheaper 4k version will not work with cameras running HDMI cables longer then 5 meters.
@TheoStangebyeamazinggrace
10 жыл бұрын
Hey Lon, one question: Lets say I have two cameras. Camera a is a close up, and camera b is a wide shot. I want camera b to have the picture in picture of a keynote presentation. Is there a way to cut to B and have the picture in picture there, and then cut back to A and have the picture in picture be gone? Thankyou!
@JamalMooreTravelBuddy
8 жыл бұрын
hello I have a canon 70d, 5d mark iii and a canon c100 mark ii can I use it with the blackmagic design atem production studio 1m/e 4k I can't get it to work.
@charly08031953
10 жыл бұрын
Hi, So have you found out what was wrong with Atem 1 m/e and your Canon camcorder? I plan to my the BlackMagicdesign 1 m/e switcher but hesitant due to your encountered problem.
@demehintimilehin5921
10 жыл бұрын
Nice video Lon. You just saved me hours of study. Will definitely try this out very soon and contact you if I encounter any problems
@davec5613
7 жыл бұрын
This might be redundant of me to bring up, but when you had your Canon hooked up, did you have other inputs going in as well? Were they all doing the same resolution as well as frame rate? Additionally, can the Canon possibly have HDCP enabled and it's not playing nice?
@RockstarBruski
7 жыл бұрын
nice review thanks for taking the time to go through it all as my church is considering upgrading their atem to the atem me
@israelmelendezjr1860
10 жыл бұрын
Hello Lon, what app are you using to switch? That's the model I use but haven't seen any app until now. Been using it with the Mac app. Thanks.
@Warrengtheregulator
7 жыл бұрын
Hi there. This past weekend I tried connecting my DJI Phantom 4 to the ATVS with no luck. Is there a piece of equipment I should buy? My DJI Phantom 4 has an HDMI output for video
@yorkie984
10 жыл бұрын
I have found that the HDMI input 1 is quite forgiving (you do still have to match the resolution and frame rate in the settings) but the HDMI 2-4 inputs are much more fussy and will not tolerate long cables or low levels. You need to add line boosters or splitters to increase the level, even cheap ones seem to work OK. HDMI to 3G-SDI converters also allow you to use HDMI sources into the SDI inputs, again, BMD make some nice ones but cheap ones seem to work just as well.
@yorkie984
10 жыл бұрын
***** I'm guessing that as the 1st input is also the analog port, it uses a different (and more expensive) chipset than the other three HDMI only inputs which is a shame as it does seriously limit it's potential at times. When we first bought this unit, we expected it to do everything we needed straight out of the box but the amount of ancillary equipment we had to buy in the end to get it all up and running was ridiculous and it can get pretty messy at times depending on the configuration being used. It's still a great low cost unit but I think if a small amount more money had been spent on the design, it could have lived up to it's own hype and saved a lot of people a lot of frustration and expense.
@wsug6186
9 жыл бұрын
Hi ! I have got som problem with installing. Thank you. Please tel me to how get start with installing switcher ATEM 1 M/E Production Switcher.
@frtnakosar3422
10 жыл бұрын
Hi Lon can u help us? we cant open DVE channel in Atem software. How we can open it?
@kevinsardon6902
7 жыл бұрын
Hello, very good tutorial! I have a question: is there any way to assign a different camera or multimedia to each Program output? Because I want it to come out different outputs on my LED screen to what I'm streaming. Thanks!
@durasrocj
10 жыл бұрын
Lon, with just 1 DVE does that mean you can control the size, position and the rest for ONLY one input? (like the PIP box you demonstrated). So for example you would not be able to have a computer screen feed and a camera feed side-by-side and both resized? Thank you!
@durasrocj
10 жыл бұрын
I'm currently looking into Livestream Studio (Windows only for now) with some BMD compatible input board (PCIe if going with desktop or USB 3.0 if going with laptop - I have not seen Windows laptops with Thunderbolt so far). If I make progress on this route I'll report back...
@elireloaded
8 жыл бұрын
I need a background, video source, and video source, all at once. Will this do that? All HD-SDI and one balanced audio input.
@gofortechnology
10 жыл бұрын
Nice video! We just got TVS and need to insert a graphic from a PC in the lower corner of a camera shot and keep it there when switching between two cameras. How can that be done since we don't have DVE?
@EchoHillsStudios
9 жыл бұрын
I was about to purchase a 4k me1 till I saw your video. The 1me is exactly what I need, since it allows 4 hdmi as well as sdi inputs. Problem on the new 4k is that it will not accept hdmi computer outputs that are converted to sdi. They are working to fix that, but no solution is in sight. I like that the 1me has the PIP feature as well as scaling, I do that on the TV Studio by using masking and keying, but it's rather tedious. Question - if you connect the multiview output , can you see every input device connected?
@charly08031953
10 жыл бұрын
Hi. Since Atem 1 m/e has USB3.0, do you still need Intensity Shuttle for Thunderbolt to stream to internet? I understand the pitfall of Atem TVS is that it only has USB2.0, to slow for streaming to internet, hence the need for Intensity Shuttle.
@thorlain
10 жыл бұрын
carlos lopez ***** i believe the USB 3.0 port does allow for live streaming via BM Media Express BUT from what i have found with BMD USB 3.0 capture devices (i own a USB 3.0 intensity shuttle and a friend owns an ATEM 1 M/E) and from nearly every forum and experiences that a friends colleagues have had, they are unreliable, stability issues (windows8 would crash randomly from time to time when streaming for long amounts of time and other issues), Compatibility is a large issue very few laptops are compatible and for alot of PC's the easiest way to get the USB encoders to function is via PCIe cards, if you want to risk it yes you should be able to get the USB 3.0 to live stream but i wouldnt recommend it, i would honestly recommend going with a different brand like AverMedia or Elgato or such for USB capture cards for livestreaming or the teradek Viduu which Lon did a review previously i believe if you have the extra cash hanging around (looking into it myself hopefully) (please note that this opinion is based on past experiences and from experiences people i know have had, there are people around who have had little issues with the USB 3.0 output, i think it is a very hit and miss thing with BMD's USB3.0 capture/stream cards)
@DaylightDisinfectant
10 жыл бұрын
Hi Lon it will sound a little rinky drink to you but I got a cheap live stream going with my ATEM Television studio. I run the 1080i output though a descaler to get it down to 480p. The descaler is a cheap Chinese thing I got off eBay for 80 bucks. Then I input 480p into the Cerevo LiveShell ($250) and right to Ustream. The result is DAYLIGHTDISINFECTANT.TV WHICH is up running 24x7 :-).
@MichaelKunkegh
10 жыл бұрын
I have connected my HDMI to the ATEM 1 M/E but am not seeing any feed although I have set the screen resolution to 1280 x 720 same as my ATEM video standard. I have tried all 4 HDMI inputs still no feed. But all the SDI inputs are ok. Any ideas.
@rigworp
10 жыл бұрын
you also need to set your refresh rate to to whatever the ATEM is expecting. Ours is set to 59.94
@MichaelKunkegh
10 жыл бұрын
rigworp how do you find the refresh rate
@rigworp
10 жыл бұрын
***** Actually there are a couple things here, ATEM's cannot tolerate long HDMI cables, so to start with for testing use decent quality HDMi cables short in length to test. If you get that working then add length and better cables (or other conversion connection methods) The ATEM in it's setting page has a section for setting the refresh rate that the switch will be running at, if you are in North America is should be 59.94, if you are in Europe is should be 50. Then you must match all the equipment that will connect to it, to that same refresh rate. Some devices may not be able to do this. Hope this helps
@MichaelKunkegh
10 жыл бұрын
rigworp Thanks am gonna try it. But just to let you know am in Ghana, Africa
@rigworp
10 жыл бұрын
***** A quick Google says you are probably should have your ATEM set to PAL which is the European standard 50 fps. What is it that your are trying to connect to it - a camera, computer ?
@DRChevalier
9 жыл бұрын
Very helpful. Was wondering about the difference between this and the ATEM TV Studio
@Canon1dsII
10 жыл бұрын
Hi Lon great job on a video!!! I have a question about your video last part DVE (digital video effect) 8:02 timeline. You were talking about DVE. You said that newer ATEM/ME/Production allows one dve (digital video effect). Now the reason why you were not able to make logo spin is because you had "picture in picture" and that considers to be an "DVE"? So logo spin and picture in picture would be 2 DVE's? I'm understanding this correctly?
@mike-majidkhostavan2035
10 жыл бұрын
Hi, Can this unit do 3 to 4 separate Chroma keys with all different background? I need to use 3 Cameras all using Chroma Key and I like to use the lower 3rd at the same time if I can. Thanks for your support and all the Best
@zahraakbari3581
10 жыл бұрын
Mike khostavan
@faressokar2
6 жыл бұрын
Thanks alot How to plugin a powerpoint presentation with this switcher Esp it can accept only one format at a time Thanks again
@gregjackson4473
9 жыл бұрын
Great taking in your explanations! Now that you have had your Production Switcher for a while, how would you rate the unit? We (a church) were very close to buying a ATEM Television Studio unit, but the pic-in-pic is a must for us. Any thoughts?
@mosqui15
9 жыл бұрын
Lon - where can I get this device? The affiliate link provided says that it's currently unavailable! I need this switcher for its PIP capbility and fits my budget ($1700) Thanks
@mosqui15
9 жыл бұрын
+Lon Seidman - I'll write to you through your facebook page!
@mosqui15
9 жыл бұрын
+Lon Seidman alright! Thanks
@mosqui15
9 жыл бұрын
+Lon Seidman see you in email!
@miladhd286
4 жыл бұрын
How capture blackmagic design atem 1 m/e professional studio production switcher
@user-vk7td9gz7v
10 жыл бұрын
Hello Dear Take advantage of your education opine Thank you You are stunning I want to ask you that I can use it for broadcast on KZitem directly?
@danielroleff2799
8 жыл бұрын
Hi Lon, I am facing a challenge with ATEM Production Switcher. After watching your review we actually decided to use it for our conference streamings. Worked very well and - more importantly - reliable. Now we are facing a new challenge: we are hosting a bilingual conference with english translation available in a seperate audio. But we cant figure out how to set up the equipment for this set up (video source, two different audio sources, all in one stream). Do you have a suggestion or idea, how that would be manageable with the switcher? Thanx Daniel
@thedigitalemotion
8 жыл бұрын
How will the end user select which audio stream they hear? I'm trying to figure this one out for you..
@eventsunlimited2338
7 жыл бұрын
Thanks for this video can you please do a similar video using latest atem tvs hd version that came out this year. i am interested to buy that if i can do pip and lower third
@PreciousTvSebak
7 жыл бұрын
Hi what's the model of your hdmi splitter please
@PreciousTvSebak
7 жыл бұрын
Gr8t thanks
@aperson1363
5 жыл бұрын
is this phillip defranco?
@Warna_Pro
9 жыл бұрын
NYONG PENGEN TUKU PRIWEN CARANE
@RozierQ
10 жыл бұрын
How can i get Picture in Picture using the TV studio ?
@steveroeb
8 жыл бұрын
+Rozier van Blerk I do PIP by aiming a camera at an output screen, scaling it to the size I want, then using the masking function on the switcher The picture is not as good, but at lease I can use my ATEM TV Studio to do it.
@Warna_Pro
9 жыл бұрын
I WILL GET YOUR PRDUCT
@sabeergo8033
6 жыл бұрын
Hello Sir Atem Production Studio 4K Not Me Model Plz requested Add Only PIP Function All Brands Video mixer Basic Fuction available Vmix, Live Stream,Datavideo,Tricast,Wirecast Etc PIP Working Education ,conference Purposes PiP Scale Moving Only Add PiP SDK update not Hardware
@avanifilms4317
5 жыл бұрын
I like video
@sabeergo8033
6 жыл бұрын
Plz Requested All Atem Production Studio 4K Users Allowed Video Media Player Support Video Formate separate Key opp Plz Support Frdz Picture in Picture Function
Пікірлер: 64