Mat, just a couple of clarifications, all models of URSA mini can output 1080i, not just the pro. Also, of you're running an ATEM switcher you can set the UM to take time code from the SDI input, that makes the ATEM the TC generator, unless you're feeding TC to that (which is what we do using a BMD sync generator, which also syncs hyperdecks, videohub, etc) We run 2 UM4.6Ks, 2 Micro Studio Cameras and an ATEM 1m/e 4k, along with lots of other kit. For best results, run the camera in "film" mode and use the ATEM camera control to add contrast and saturation. Keep up the good work.
@mondotv4216
7 жыл бұрын
So you can't jam sync the timecode to the tc in port? That seems odd - to have tc in but having to leave it connected full time.
@evvivaDio
7 жыл бұрын
Do you think this could be used in an environment such as a 10 cameras sport production on the field? We currently use GrassValley LDK8000, not happy with those and we were also thinking about upgrading to 4K our entire system. Great video, by the way, found almost everything I was curious about!
@MatCooper
7 жыл бұрын
evvivaDio the camera would be perfectly happy in that environment. Where you'd want to spend a little more time is on the lens controls. If you stayed with ef for unmanned wides etc, then you may need some control fngers or something similar. Image and image control wise the camera ticks a lot of boxes.
@evvivaDio
7 жыл бұрын
We have only B-4 mount lenses, which are designed for 2/3" sensors, so I was wondering whether there would be vignetting on the image or not. I was also wondering if the iris and the ND filters could be remotely controled from like a truck, where we have our mixer and our CCUs... Does the camera give power to broadcast lenses in order to zoom with the remote? Thanks a lot for your kind reply!
@SegaleMabiletsa
7 жыл бұрын
If you are using B4 lenses, you have to set the camera to shoot in HD mode and not 4K. I believe you can control the ND filter through an ATEM switcher and the camera does power the servo through the 12pin connector.
@TV-FilmCameramanUK
6 жыл бұрын
LDK 8000s - stick with those! You wouldn’t want these!
@DhirajVSalian
7 жыл бұрын
Mat, waiting for the AJA Helo review.
@MatCooper
7 жыл бұрын
Im honestly nearly done. I just got a new beta of firmware send yesterday .. after having finished the video, so We are checking that out before re filming the relevant bits. Thanks for your patience.
@DhirajVSalian
7 жыл бұрын
Mat Cooper Wow, sounds great. Thanks Mat.
@MatCooper
7 жыл бұрын
No problemo. Thanks for watching
@swingindaddydick
7 жыл бұрын
Hey Dork, CCU stands for Camera Control Unit! - en.wikipedia.org/wiki/Camera_control_unit
@TV-FilmCameramanUK
6 жыл бұрын
CCU - colour control unit? - you know what you’re talking about... NOT!
Пікірлер: 14