This imperial measure system is so 19th century. Great Video thougj!
@TalRohan
10 ай бұрын
useful stuff, something I find useful when forming longer scrolls is to soapstone mark where I want the metal moving when I switch forming tools also marking the side of the metal towards the direction it needs moving. Thanks for sharing
@gateway8833
7 жыл бұрын
Sir, you are a genius. Raising the center of the scroll, thats solved all the problems I had with scrolls.
@df-intheshop330
7 жыл бұрын
I wish i could take credit for that but the guys that thought that up were a lot brighter than me
@wabijohn9172
7 жыл бұрын
Thanks! Very good demo. Clear narration. Painted metals however are always a health problem in the forge. We have to be very careful as we heat coatings and chemicals, greases etc. on salvaged metals. Always clean metals to be welded or heated to avoid potential chronic exposure to respiratory health risks and the absorption of toxic materials.
@sherwoodlayton9595
Жыл бұрын
Very informative, Thank You
@cuperpizarro2356
7 жыл бұрын
Gracias maestro por compartir tus conocimientos ,saludos cordiales desde Santiago de Chile
@SquirrelsForAll
6 жыл бұрын
Wonderfully brilliant. Thank you!
@miketownsend6108
6 жыл бұрын
you are so awesome i have learned so much ; So many thanks to you!!!!!!!!!!!
@general5104
4 жыл бұрын
SWEET! Thanks for a perfect video!❤
@grayem76
7 жыл бұрын
i love your explanation and it works well im starting a gate and looking for tips on scrolling you have made this well
@fernandomendonca2316
2 жыл бұрын
fantastic, ty
@appalachiananviltoolco.5091
7 жыл бұрын
must have item for the shop. great vid
@amnuaykaembubpha8663
4 жыл бұрын
ชอบครับขอบคุณครับ
@liegesaboya8265
8 жыл бұрын
Your videos are great ! thanks so much for sharing them ; its the first time I see how to make a scroll - do you have a photo or a video to understand how to make a scroll bender ? excuse me my poor english , Im brazillian
@df-intheshop330
8 жыл бұрын
If you mean the bender that I'm using in this video to make the scroll form you can see it here -- kzitem.info/news/bejne/tGt5uKePoXynhGU
@marcojaimes8721
6 жыл бұрын
Sir , Excellent video thank you very much !!!
@muazamshehzad2287
6 жыл бұрын
hi u from
@kimcurtis9366
7 жыл бұрын
You make everything look so easy! Do you have any videos on how to make a bender? I can sort of see how it's made but, I'm chicken to start when I'm not really sure!
@df-intheshop330
7 жыл бұрын
I do get a lot of questions o-n the bender I'm using so i did make this video. If you need more details let me know kzitem.info/news/bejne/tGt5uKePoXynhGU
@WhisperingMyth
7 жыл бұрын
Just a quick question, sir. At 3:33 are you saying bits or bics? I tried using the closed captioning, but it didn't quite pick up on it either, I don't think. If it's bics, would you mind terribly sharing what that is? If it's bits, then I think I'm good, lol. Thank you for another great video!
@df-intheshop330
7 жыл бұрын
That is bick ( short for bickern, also called a stake anvil ) which is an small anvil that fits in the hardy hole of a larger anvil to allow you to hammer small shapes that won't fit around a full sized anvil.
@WhisperingMyth
7 жыл бұрын
Thank you, sir! That explains the kinds of results I got with my online search, and tells me what the object has been that I've seen you use from time-to-time that wasn't a mandrel :D I appreciate your reply!
@zdjm8923
2 ай бұрын
Love the video. What is the bending tool you’re using at the 4:00 minute mark?
@df-intheshop330
2 ай бұрын
It's basically the same design as the Harbor freight model only the bars are extended above the bending arms to make It easier to bend full circles.
@abdulhamoui4376
7 жыл бұрын
hey great videos dude , on the end of your drawing is it inch and a quarter ?
@ckobesko
7 жыл бұрын
very nice. curious would you make abd sell? need a 6" 8" and 10"
@youssefbousseta7941
6 жыл бұрын
الله ازين الصنعة
@eduardkordzaia862
3 жыл бұрын
Helov👍👍👍
@arcturusbbqsausagemaking2435
7 жыл бұрын
Will you consider building me three or four scroll forms 4 "6" 8" ?
@df-intheshop330
7 жыл бұрын
Sorry I'm not building anything right now. I hardly have enough spare time to get the videos out. You don't need 4 different scroll forms anyway. Make one form that has the largest starting radius that you are after and use that to make the other scroll forms you need. That way even if you are off a little all the scrolls will look the same. It's the overall proportions that are important not the exact shape of the scroll.
@lilyzhang2881
7 жыл бұрын
Hello, we can make the scrolls for you. we are in China professional for different iron accessories.
@MrBakkerBolletje
Жыл бұрын
@@lilyzhang2881 contact me
@hectorcalderon3011
4 жыл бұрын
I'm surprised someone didn't say I'm going to make one of those with my Everlast welder every video I've ever watched someone says that like who cares what type of welder you have just make something useful and shut up
Пікірлер: 35