applause applause! for accomplishing such a smooth, quiet & useful build from recycled parts. Takes plenty of smarts and guts. GREAT JOB
@BIGDOGFORGE
3 жыл бұрын
Thank you very much!
@killerkane1957
8 жыл бұрын
I hate it when viewers give advise. Yes the spring can be bitchy. But the POINT is that you took a pile of scrap and created a functional hammer. What did the advise givers do today? Great job! Creative!
@BIGDOGFORGE
8 жыл бұрын
Thanks killerkane, it makes me smile every time I use it. And thanks for checking it out.
@jdlives8992
7 жыл бұрын
KillerKane most people that leave bad comments are total ding bats that couldn't change a flat tire. Oh and 99% are total haters. Your hammer is off the chain.
@shonaoneill5151
7 жыл бұрын
BIG DOG FORGE Amazing job, I gotta make me one of these ;-)
@eldenchristensen165
7 жыл бұрын
KillerKane q
@nickaschenbecker9882
3 жыл бұрын
This is the thing every smith who does it by hand wants (that and room to put it in!) and you built your own. If you're lucky you might find one for a grand or two somewhere and have to drive it back yourself in a truck or pay out the nose for shipping. This was $60. An added bonus to building it yourself is you actually know how to fix it when (not if) it breaks.
@joelongstaff7601
7 жыл бұрын
Hats off to you Sir. I admire folks who can build things from bits of scrap. Skills like yours are what build this world and probably what will save it. Thank you for sharing.
@WireWeHere
5 жыл бұрын
Much more impressive than buying the latest and greatest that is available today. Never tire of looking real close at the details of a custom creation such as this. Thank you so much for letting us in on your recycling project.
@charlesknouse7634
7 жыл бұрын
Super nice work, really great, very creative. That spring / lever arrangement driving the hammer is brilliant!! At first it looks loose as a goose, but that's part of the charm and usefulness of it, you get great control from light tapping to full out Thor blows, and the way you put the vertical ram onto ways that keep it going up and down without sideways play or scuffing forward or back or rotating, for that matter, is outstanding. Thanks for showing it, and after watching your video it is now clear to me that I HAVE TO get a pickup truck and start making a PILE of junk, you just can't do anything really good without a great pile of junk to start with.....
@MongaloidMayhem
7 жыл бұрын
This is a beautiful work of art. Kudos for your creativity. I wish I could make something like this.
@offshoreman71
2 жыл бұрын
Necessity is the mother of all inventions. I tip my hat to you. This is awesome!
@walbergforged9044
7 жыл бұрын
i stumbled on this when i was thinking of building one. great, simple design. mine took three evenings to build and runs off a floor buffer motor i got for fifteen bucks. think I'm into the whole thing for around forty. thank you so much for posting this. didn't have a big thick round for a flywheel, so i used a plow disk and welded chunks of axle on until i got good counter balance.
@BIGDOGFORGE
7 жыл бұрын
Thanks for watching Caleb, sounds like quite a machine I would love to see some pictures, to take care and be safe.
@suminagum6605
Жыл бұрын
Good job , I’m getting things gathered up to build one myself, just haven’t made up my plans yet. Helps to watch videos like yours Thanks. 👍
@natbasart6213
7 жыл бұрын
This is amazing! So cool that you built this from scratch but you get extra points for using scrap parts and ending up with something you can be proud of. Thanks for sharing
@BIGDOGFORGE
7 жыл бұрын
Thanks Nat I have a lot of fun building a and the scrap pile got much smaller. Thanks for watching I do appreciate it.
@BubbleOnPlumb
6 жыл бұрын
I have been looking at power hammers lately and finally gave up on buying one due to the prices I've been finding. I don't have a stockpile of scrap to draw from but your video has certainly inspired me to start looking for odds and ends in the hope of putting something like this together at some point down the road.
@razorburn71
7 жыл бұрын
I watched the video... then immediately replayed it. Beautiful hammer! Will be watching more of your videos. Thanks for the inspiration. Mark
@BIGDOGFORGE
7 жыл бұрын
Thanks mark I appreciate that, I hope you enjoy the videos thanks for watching and take care.
@1924ab
7 жыл бұрын
what a great piece of equipment,nothing more satisfying than building something from scrap. My hats off to you,thanks for sharing.
@michaelfoye1135
7 жыл бұрын
You must be part MacGyver. Impressive building a power hammer out of spare scrap and from seeing one used on a KZitem video. I'll be watching your channel. Thanks for sharing.
@BIGDOGFORGE
7 жыл бұрын
Thanks Michael it was a challenge and a lot of fun, thanks for watching and take care.
@richparker7778
7 жыл бұрын
That is so damn cool. I want , no I will make one.lol . 53 years young and just starting to do a bit of smithing to go along with my wood working. I really enjoy your channel sir. Thanks for sharing.
@heardashot
7 жыл бұрын
This hammer construction represents a very clever blacksmith where his innovation & creativity from every day scrap items have now the form of a very functional & practical power hammer. It’s a wonderful piece of work. I have spent a considerably amount of time researching homemade power hammers where I can honestly say this is very satisfying to watch where I have learned a great deal from this man. I can now start something similar for myself. BIG DOG FORGE; - thank you so much for a very inspirational piece of work. One of the fundamentals of a talented & gifted blacksmith is the ability to work with what you have and you have just proved that very point with your hammer construction. Extremely well done and thank you again. Greetings from across that big span of water, from Ireland. Good health to you Sir.
@BIGDOGFORGE
7 жыл бұрын
Thank you very much I appreciate all the kind words, I hope your hammer build goes very well it sounds like you've done your homework, if there are any questions I can answer please don't hesitate to ask, take care of yourself be safe and I hope things are going well in Ireland. And thanks again.
@heardashot
7 жыл бұрын
Ah very good BIG DOG FORGE. All that are dearest to me have good health my good man, so things are great in Ireland. You are very welcome. There's a lovely action on that hammer. You've got the movement spot on. Thanks again, very inspiring.
@lindsayfog5246
6 жыл бұрын
I like the shaft up there on top as opposed to the rocking beam style. simple and efficient and balanced. very cool
@pierreswanepoel8561
6 жыл бұрын
this is just brilliant. your engineering skills are amazing
@hokepoke3540
4 жыл бұрын
Well there you go again, now you got me looking at my junk pile again. Thanks for the video I did enjoy it much.
@jamesdenney9653
7 жыл бұрын
I've seen a lot of DIY power hammers on YT vids, your's is definitey the smoothest operating and has the most style. Kind of a steampunk power hammer. Very cool =)
@BIGDOGFORGE
7 жыл бұрын
Thank you very much James I appreciate that very much, thanks for watching and take care.
@analog56x
8 жыл бұрын
im so torn for what style hammer to build... this is by FAR the most simple design ive seen, and that is a complement because a lot of them seem overly complicated... you found a way to be rid of all the excess and have something that still works as its supposed to. this may have changed my plans... i was leaning more towards a leaf spring style hammer before, just because of the spring mechanism for the dupont style looked really intricate...
@BIGDOGFORGE
8 жыл бұрын
Thanks for the kind words. I have built a helv hammer/leaf spring style hammer in the past. And didn`t have very much luck I could never get the hammer to deliver an efficient blow. So this seemed to be the simplest answer and as usual the simplest answer is usually the right one and in this case for me it was. Good luck on your build and if i can provide any info to help just let me know.
@analog56x
8 жыл бұрын
i subbed and just seen your replacement of the wood stump with that piece of 1045. looks like it works pretty good! so that spring is from a motorbike? im guessing there is constant tension on it to hold it in place, as i dont see a bolt or anything through it... do you just have a piece of round stock stuffed in the end to hold it in place? do you have the flywheel balanced? im now designing something pretty much the same, except ill have a spare tire as the clutch. mount it behind on the drive shaft with a flywheel like yours. how heavy is your flywheel? what is the OD of it, and how critical is the placement of the offset peg where the hammer linkage mounts? i think that should be enough to get me going haha! thank you very much!
@BIGDOGFORGE
7 жыл бұрын
I am going to be doing a Q$A video on the hammer soon and I'll try to answer all your questions, I will be covering every thing from materials to dimensions and much more. Thanks .
@analog56x
7 жыл бұрын
BIG DOG FORGE i cant wait man :) i need to hit up my local scrap yard before they close the yard for the winter haha! thank you
@analog56x
7 жыл бұрын
CoreyTheWolfTWC been looking up a ton of designs, and i think i may copy this one except for the linkage. a set of leaf spring halves mounted to the side with shackles going to the rotating assembly seems to be popular as well. anvilfire's X2 design is what im thinking.
@scootin123
6 жыл бұрын
You mean to say you figured out the spring loaded what Chama call it just from photos of a factory machine I wish I had them type brains. Glad you posted this video
@stantilton3339
8 жыл бұрын
Just came across your hammer. Pretty impressive for a scrap hammer. Looks like it will certainly get the job done. Great walk around and explanation of parts etc. Thanks for sharing.
@BIGDOGFORGE
8 жыл бұрын
Thanks Stan, surprisingly it works better then I ever though it would, I guess if you hold on to enough junk parts long enough it pays off. Thanks for checking it out
@Flyeroz
7 жыл бұрын
Excellent job! I love your ingenuity. To create such a functional machine out of the scrap is truly amazing. I really like the design of the hammer part - very elegant IMHO. Thank you for sharing. Greetings from Oz.
@BIGDOGFORGE
7 жыл бұрын
Thank you very much I appreciate the kind words. And thanks for tuning in.
@PhaseConverterampV
4 жыл бұрын
I’d rather have a tool that’s sinfully ugly and works amazing , than something new off of Amazon that’s looks shiny and is junk. Great repurposed parts. Good design ideas.
@BIGDOGFORGE
4 жыл бұрын
thanks for watching
@doelbaughman1924
3 жыл бұрын
Amen!
@RobertFay
6 жыл бұрын
Clever, cunning, creative ... and Brilliant. Bravo! It seems to have a good feel to it ... really nice feel to it. There is a quiet and relaxed sense about it. I hope the metal likes it too. || Yes, i understand and agree, having some additional mass below the bottom Rail anvil will help provide a countering to the inertia of the hammer rail, but that is not a hard thing to turn into an ongoing (adjustment project) experiment. Hell, a large metal box filled with melted lead would work under the big metal round you already have in place, i would suppose.
@GarysBBQSupplies
7 жыл бұрын
Love your build, it seems like it is more easily controlled than anything else I have seen. Thanks! :)
@BIGDOGFORGE
7 жыл бұрын
It seems to work better than any other hammer I've before' thank you very much for the kind words and thanks for the comment.
@snoopdog68
7 жыл бұрын
Id say its absolutely beautiful. An economically sound piece of engineering. Very well done. :) Id be thrilled to have that.
@p1stolp.521
7 жыл бұрын
beautiful working piece of art.. and you made it out of scraps. wow amazing..cheers from mexico brother..
@gozob
7 жыл бұрын
I really wish I could build this. I would love to have a forge some day I could actually work on but as it stands now I'm only allowed to have a soup can as a forge due to bylaws and I can't really afford to move. I hope I can really get into it later on. Would be great if I could have someone to teach me but the closest person who does this type of stuff is about 3 hours away. Anyway, enough griping. AWESOME stuff man. I love your design and your workshop.
@brodypayne1994
6 жыл бұрын
that was a great looking power hammer and looks great and simplistic and the fact that you made it from scratch from other parts is awesome. i wish we had salvage yards they would let us loose to find and get scrap but where i am from they are more afraid of liability then anything and i understand but man i just want to play! would love to see things you have used this hammer on!
@Hammerandhilt
6 жыл бұрын
Very ingenuitive, great to see the piece running.
@zoesdada8923
4 жыл бұрын
If you use a flux core welder and clad your dies with 11018 wire they'd last forever. Im sure you know that. Beautiful job.
@cerocero2817
3 жыл бұрын
Hopefully by the time I'm 150 years old I'll have plenty of scrap to build my power hammer
@pirreli5
7 жыл бұрын
helping yourself with intelligence and being diligent at the same time!!...cant be bad, well done:)
@BIGDOGFORGE
7 жыл бұрын
Thank you and thanks for watching.
@thornwarbler
6 жыл бұрын
Thats the nicest one of those ive seen..................Fantastic, thanks for showing it
@swierkupitok7264
3 жыл бұрын
Thank you soooo much- now I understand how it works!
@BIGDOGFORGE
3 жыл бұрын
You are so welcome!
@leperejoe1536
6 жыл бұрын
Very nice design, and it seems to work really well.
@bentoombs
6 жыл бұрын
can never get enough. Fancyest Scrappy ever..👍👍
@onemantwohands5224
7 жыл бұрын
Hey big dog, I love your videos very much! :-) and I've got to say that is one of the smoothest running units I've seen ! I'm about to embark on the same ideas for my hammer. I've thought of making some videos on the build as I go. love ya work mate cheers from Australia :-)
@BIGDOGFORGE
7 жыл бұрын
Hello Jezzimo, thank you very much I do appreciate that. I hope your hammer bill goes very well, it would be very cool to see some videos on that. Thanks again I hope things are going well in Australia, take care my friend and thanks for watching.
@MrTimNed
7 жыл бұрын
That's an awesome dohickey. Good job Tim. Thanks
@BIGDOGFORGE
7 жыл бұрын
Thanks again Tim, I do like my dohickey's, thanks again for watching.
@saksikasi
6 жыл бұрын
Great work! It seems to perform very well, watching your other videos. I'm looking forward to building something similar. Easiest sub of my life.
@doggonemess1
7 жыл бұрын
That's awesome! I would be a little concerned about the huge spinning part and accidentally getting body parts stuck in it, but I'm clumsy as crap and hurt myself on things that nobody else can.
@maplehouseknives
6 жыл бұрын
That my friend is quite the invention! Very cool!
@Armorcreations1
7 жыл бұрын
A quick comment, A piece of railroad track on end withe the round plate on top might work out. You could use a chainsaw and plung cut the center of the wooden beam to receive the track. brain storming lol love the videos!
@7.62forge3
8 жыл бұрын
I have a friend who made a tire hammer like this, used a bogie from a Stuart light tank as the hammer assembly.
@BIGDOGFORGE
8 жыл бұрын
Sounds cool I'd like to see some pics if you have any send them along.. And thanks for checking out my channel.
@7.62forge3
8 жыл бұрын
+BIG DOG FORGE Sure, I'll see if I can get him to send me some
@BIGDOGFORGE
8 жыл бұрын
Very cool thanks man.
@SteveOlan
7 жыл бұрын
So I am trying to figure out a design for a power hammer and I have seen several videos. I like your design a lot but I have a question. I am not even exactly sure of the terminology to use to ask it. There is obviously something I would want to refer to as throw in your hammer mechanism. If you were to manually place the hammer at it's lowest position with the flywheel shaft down how much space would be between the anvil and the hammer? Am I making sense? I am thinking there is a space there and the "spring-action" in the mechanism throws the hammer and closes then gap when running.
@thomshere
6 жыл бұрын
I would be very PROUD to own that! GREAT job!
@NomadMakes
6 жыл бұрын
This build is fantastic!
@deesterdee123
7 жыл бұрын
that is a very cool power hammer nice job !!!!!!
@BIGDOGFORGE
7 жыл бұрын
Thank you
@terrandroid
7 жыл бұрын
beautiful machine, cool design not to big. it runs really smooth
@thomaslaunhardt6733
6 жыл бұрын
Hi, it looks great. Have you made any plans at the beginning? I´d like to build one myself but don´t have any idea where to start. could you give me an advice or some hints how to build something like this nice peace of a hammer? I´d be thankful for any help :)
@robbinghook3571
5 жыл бұрын
Your video did it. I'm making a hammer like this. I think this is the most efficient one. No other model. But I think everyone bloat about how cheap it cost! I don't believe that. But anyway thank you.
@YayaFeiLong
7 жыл бұрын
Maybe not the best power hammer out there, but certainly the most impressive :)
@JonDingle
5 жыл бұрын
Hello young man, you have an interesting channel so after watching a few videos I thought this guy is clever man and worthy of subscribing too because I might just learn something. Cheers!
@phillipgraham1422
7 жыл бұрын
very creative and ingenious
@billybyrd8812
6 жыл бұрын
I GOTTA BUILD ME ONE --- WHAT A GREAT DESIGN Thanks
@nomadmad308
7 жыл бұрын
This is awesome. Think this is how I want to build mine.
@Mrinthewind
4 жыл бұрын
Awesome build my friend especially because you scavend most of it
@lemix69
3 жыл бұрын
Pretty cool!
@gregmundo6107
5 жыл бұрын
Great work , to me is a excellent machine, craftsmanship raw, awesome
@AZ.tattoo
5 жыл бұрын
Very nice job!
@ScottyBr4700
8 жыл бұрын
You need to put a guard in front of the coil spring. Blacksmiths have been killed and injured when that spring gives up. There are videos on u-tube that can help you figure out how to do it.
@BIGDOGFORGE
8 жыл бұрын
Thanks I will definitely check in to it I've never seen one before butt I will check it out on youtube, thanks for the info.
@NearlyNativeNursery
6 жыл бұрын
Very well done and super resourceful.
@paulorchard7960
4 жыл бұрын
Do you have a build video of this, I have similar ideas but yours seems better, my idea will be heavier and bigger and I now wonder if I’m better going smaller!
@mrbillaloo
4 жыл бұрын
Greetings from Aus! Love this hammer. I'm struck by how stable it is. Doesn't look like it moves at all. Can I ask, is the fly wheel exactly the same weight as the ram and that the reason why? and is that old 750 spring attached to the linkages by weld?
@TonyUrryMakes
6 жыл бұрын
Excellent build!
@nathanmayes2639
6 жыл бұрын
I wish I had the ingenuity to build something like this
@FletcherAndEdward
8 жыл бұрын
It looks really smooth and quiet. Great work, maybe I'll have to order pillow block bearings and take a second look at my own junk piles. That really is a great build, most are over complicated and end up clunky and wobbly. Is there anything you found really vital to getting the results you did?
@BIGDOGFORGE
8 жыл бұрын
Don't offset the crank in front to far and the spring between the front arm's shouldn't be to stifff. Good luck with your build, I would love to see it when your done.
@chacalcutelaria
4 жыл бұрын
good morning, thanks for sharing, how many hp has this engine and what is its rotation?
@BIGDOGFORGE
4 жыл бұрын
1hp at 1750 rpm Thanks for watching.
@chacalcutelaria
4 жыл бұрын
@@BIGDOGFORGE eu que agradeco thanks fron brazil
@shane-3170
6 жыл бұрын
I'm impressed with all of these tire hammer designs, but I'm stuck between these build designs and the ORIGINAL JUNK YARD HAMMER.
@tankadam6281
7 жыл бұрын
very nice I like junk I was wondering if you had a design you based your hammer off or just had an idea of the mechanics and ran with it
@fpbinkhorst
7 жыл бұрын
Hello Big Dog Forge, Thanks for the fast answer! Both links however, does not function on youtube.....
@djberg3483
7 жыл бұрын
Alexander Weygers would be proud! awesome work!
@BIGDOGFORGE
7 жыл бұрын
Wow that's very high praise, he was an amazing man with many talents. Thank you so much I do appreciate that. Thanks for watching and take care.
@djberg3483
7 жыл бұрын
BIG DOG FORGE his books were just recommend to me, great reads, and just what I love, making awesome from left overs!
@tatermorgan6559
7 жыл бұрын
Best one Ive seen so far
@rogergorden9023
3 жыл бұрын
I can’t believe you never show the whole machine... sure would help!
@BIGDOGFORGE
3 жыл бұрын
Here you go, check the full play list on the power hammer. kzitem.info/door/PLw0A5XGnSdxTFgqcsTRaf5l-VYQtDZ-jj And Thanks For Watching.
@alexlt007
7 жыл бұрын
fantastic build. thanks for posting it.
@BIGDOGFORGE
7 жыл бұрын
Thank you and thanks for watching.
@lastresortblades3433
7 жыл бұрын
great looking hammer... in the process of several expansions myself and about to start on a power hammer... wondering what kind of spring you used in the power head... have been looking at various strut springs but they all seem too stiff for proper timing.
@BIGDOGFORGE
7 жыл бұрын
You should check out my video called power hammer Q&A it covers just about everything I put into the hammer of the spring you're referring to came from a 1976 Honda CB750 I had to cut 1 inch off of it to get the right tension but it works perfectly. Thanks for watching and have a good one.
@2209beata
7 жыл бұрын
Well done on a quality build
@BIGDOGFORGE
7 жыл бұрын
Thanks Beata and thanks for watching.
@adambrennan558
22 күн бұрын
Great Hammer. Dimensions of the Du Pont Linkage?
@alfredsamson4089
7 жыл бұрын
no your right on the target the beer plus the barring would increase the hight so thank you for your time and if i have any more ? i will contact you
@BIGDOGFORGE
7 жыл бұрын
No worries Alfred :)
@chrisdaube5435
3 жыл бұрын
Hi Tim Have you had to replace your spring at any time? I've got ,just about, the identical spring and was wondering how much you compressed it initially? Cheers
@BIGDOGFORGE
3 жыл бұрын
I have been using the same spring from the beginning and I compressed it around 2 1/2"
@RFAM05
7 жыл бұрын
That looks exactly like what I would like to build.
@atgehumanidaes4304
7 жыл бұрын
Super idea Maestro!
@BIGDOGFORGE
7 жыл бұрын
Thank you so much. And thanks for tuning in take care.
@atgehumanidaes4304
7 жыл бұрын
BIG DOG FORGE Thank you too...
@chrisdaube5435
3 жыл бұрын
Hey Tim Another quick question, My coil spring wire is 3/8 in diameter, what is yours ? I'm trying to just get a gauge on this as I'm using a lot of your dimensions for the hammer . Thanks tim
@BIGDOGFORGE
3 жыл бұрын
Let me check
@ricklipp4029
5 жыл бұрын
OUTSTANDING, man!
@TheMaidenengland
7 жыл бұрын
That's awesome mate well done
@BIGDOGFORGE
7 жыл бұрын
Thank you sir.
@levkarmran8162
2 жыл бұрын
Гениально и просто!
@industriousus
7 жыл бұрын
Good job, Big Dog Forge!
@BIGDOGFORGE
7 жыл бұрын
Thanks Jake, and thanks for watching.
@donaldstearne446
6 жыл бұрын
i 'm surprised @ how little vibration your hammer creates . as some i have seen look like they will chase you out the door
@bluepigswag333
7 жыл бұрын
I love the idea, its simple yet effective. are the tracks mild or hardened steel? I'm a beginner and was told hard steel will chip and cut me with a miss hit
@BIGDOGFORGE
7 жыл бұрын
Hello and thanks for tuning in, the tracks are actually made from cold rolled steel it works well because it's harder but it's not hardened, thanks for watching and take care.
@bluepigswag333
7 жыл бұрын
Yes sir you also
@fpbinkhorst
7 жыл бұрын
I'm looking for a way to build a powerhammer myself too! This one works very smoothly, because of the light compression spring between the arms and because you have a perfect way to guide the RAM downworths. How did you construct the guide with the bearings? I cannot see it excactly in the video. Can you sent me a picture or sketch of it ?
@BIGDOGFORGE
7 жыл бұрын
Hello fpbinkhorst, I hope your power hammer build goes very well, there's a second video on the power hammer with much more detail describing exactly what you need, kzitem.info?o=U&video_id=2xoZgC6JiYQ this should help with your question. There's also a second link of an upgrade, kzitem.info?o=U&video_id=vm9KBhKCfG0 hopefully these will give you everything you need if not send me a message and I can provide further info. Thanks for tuning in take care.
@tjn2254
7 жыл бұрын
Pretty smooth action
@BIGDOGFORGE
7 жыл бұрын
Thank you sir and thanks for watching.
@impactajuvenile
7 жыл бұрын
Can you show us some things that you have been able to make with that ingenious machine of yours? Thanks
@BIGDOGFORGE
7 жыл бұрын
I sure will, I have a video coming out in a couple of days of a couple of different things that I've done recently. Thanks for checking out the video take care.
@carlthornton3076
3 жыл бұрын
Very Good!..
@BIGDOGFORGE
3 жыл бұрын
Thanks!
@artisansportsman8950
7 жыл бұрын
Great job , thanks for posting.
@BIGDOGFORGE
7 жыл бұрын
Thank you very much.
@deesterdee123
8 жыл бұрын
That looks very good
@BIGDOGFORGE
8 жыл бұрын
Thank you very much
@tankadam6281
7 жыл бұрын
guess I shouldn't of commented before I finished the video any way great job
@BIGDOGFORGE
7 жыл бұрын
Thanks for checking out the video I build most of my stuff on the fly it seems to come out better that way but if you need more detail on more than happy to provide it, thanks again and have a merry Christmas.
@john-helgehofstad4820
7 жыл бұрын
Wow, thats a real great hammer. Do you have any measurements and componentlists, or some drawing/sketch you followed. and possibly willing to share?
@BIGDOGFORGE
7 жыл бұрын
I will be doing a Q&A video on the hammer soon it should provide all the info to build one from start to finish.
@john-helgehofstad4820
7 жыл бұрын
That is awesome. Really looking forward to the Q&A
Пікірлер: 252