Great improvement. Can I offer a little trick . When you IU TO 3d more or acro give the heli some time to build up speed or you might lose tail authority. Also when doing tic tock the cyclic and collective pass 0 at almost same time. Pull cyclic then catch with collective. Do large rainbows 🌈 then slowly bring it vertical. I hope this helps Brian.. also never use trim buttons like fixed wing . Do a trim flight ..
@BrianPhillipsRC
2 жыл бұрын
It does, thanks for the tip!
@dbflyerr007
8 ай бұрын
Brian, you are a pretty darn good helicopter pilot, despite your self-deprecating comments. I'm jumping back into the hobby after over a decade away and dusting off my Blade MCP-X WITH DX6i. Ordered this bnf from Horizon and will fling around the MCPX to warm up while the bigger heli ships. Thanks for your video and I look forward to watching more from your channel. Keep flying!
@BrianPhillipsRC
7 ай бұрын
I hope my comments don't come off as too self loathing ;) I don't mean anything except to share that if you're a GREAT heli pilot, I may be the limiting factor in the performance of the craft. This is kinda what I mean when I caveat my flights and commentary. Gotta keep in mind, even though I'm a lot better than I was about 10 years ago, I'm still TERRIBLE compared to some of these guys I've watched fly in person at the feilds and events - they are fantastic...and I might be a better "analog" for the "average RC joe" but still, I am working on it...just not like the die hard heli fans. They would have it that I would quit my job, stop flying fixed wing, and just focus on helis - LOL ;) But seriously, I could get better, but we're spread thin at the moment, and I AM doing the best I can. Thanks for the kind words, and keep your eyes out for the upcoming and nicest heli we've ever done ;)
@whoknows8678
Жыл бұрын
The "bent" pushrods aren't for adjustment like they are on UMX airplanes. The U-bend is a shock relief point to hopefully prevent stripping the servo gears. The FBL unit has a menu you can enter and use the TX sticks to trim/level the swash at each point.
@westhobbiesrc8051
2 жыл бұрын
So a few things you need to do. Number one there is swap in the head block as soon as you go to a high head speed you were going to get a massive vibration and helicopter will shake violently. Use a piece of heat shrink on the main shaft before sliding the head back on. I have a video on my channel. Also you’re going to need to lower your tail game and forward programming big time if not you will get some massive tail oscillations and it will act crazy. Incredible helicopter now with those fixed.
@BrianPhillipsRC
2 жыл бұрын
sweet! Thanks
@westhobbiesrc8051
2 жыл бұрын
@@BrianPhillipsRC you’re welcome!
@sasquatchhadarock968
7 ай бұрын
Just got this baby myself this week. "Flown" three times, crashed twice 😅. Next biggest heli I've controlled is the 120 S2 and there is just... there is just no comparing the two. The 120 S2 is a big step up from say, an MSRx or the Nano, sure, but this 180 is a BEAST by comparison. The 120 is big enough to be dangerous but the 180 will straight up injure people if handled wrong. I've been humbled (snapped the dang tail rotor on my first battery) and I will be spending a great deal of time in SAFE mode and developing my basic control skills from scratch. "Small" he says. Pfft. Size is relative. Yeah, the 230/330 etc are huge by comparison, but my frame of reference is the Blade MSRx (fixed pitch, pre-Nano Blade heli). "Don't get cut" yeah, I failed that already 😑with my first crash. Glad I didn't have carbon fiber blades on it. Left a nice welt on my stomach but taught me a valuable lesson for the small price.
@gregoryosen9423
Жыл бұрын
I recently discovered your videos and love them. I bought a Habu RTF and then a UMX Ultrix and can fly them okay. I bought a Blade 330S RTF because of your video, but never even got it off the ground. I want to fly a Heli also. The 330S in normal (safe) mode would just flip over onto the right side before it would even get off the ground. Took it to the store I bought it from, and the owner tried to fly it and could not. He opened a new box and could get that one off the ground, but it immediately would move forward quickly. He told me to let him keep it and he would adjust it, but he could not. HH told him it needed a new Gyro and sent him one. It still would not work so they had him send it to them. He got it back a few days ago (been 4 months total). I came over to get it and he tried to demonstrate it but it immediately flew straight left and crashed into a barrier. He gave me my money back. Your videos make it look easy to fly in Normal mode. What do you recommend it I want to start learning to fly a Heli. My local club does not have any Heli pilots that I have been able to find.
@BrianPhillipsRC
Жыл бұрын
Heli's can be very tough!!! If they don't work right, and 100% right, they can destroy themselves in SECONDS! As for what happened in your experience, I can only speculate, which may not help, but I BET you didn't have SAFE ON or activated, as you may have thought. One trick...hold the heli with THROTTLE HOLD ON, by the rotor and swing it, and see if the blades move to correct it...it's weird feeling, and the other way is to hold it by the skids, and see if the blades correct when you pitch the heli forward and backward, then roll left and right and see if the heli RESISTS this movement. If it doesn't, you're NOT in SAFE (Sensor Aided Flight Envelope AKA AUTO LEVELING)...and if this is NOT on, as a beginner, you won't be flying for more than a few seconds. Here's my 2 cents...if you THINK you had it wrong...then don't even TRY to take off. You have to be 100% sure. There's not a lot of wiggle room on a heli, so you gotta get it figured out, unless you're more skilled than me (and you might be)...then if you're confident, sometimes even SPOOLING UP will make a heli TIP over, and this can be very disconcerting, so you gotta get it PAST this point of oscillation, if it happens, and sometimes it's easier to get into "IDLE UP" so the blades spin at FULL (or 80%) speed from essentially anything on the throttle side (the collective AKA the LEFT stick)...then you'll spin right PAST the part where the dang thing tips over. Say the left stick is at 40% - you'll still be SUCKING to the ground...but when you get to 50% or so, you'll be about NEUTRAL on lift, then at 55% you'll be JUST starting to take off...then so on and so forth, unless you change your THROTTLE CURVE &/OR PITCH CURVE...which is just a fancy way to tie the left stick to TWO things... HOW FAST the rotor spins, and WHAT PITCH the Blades on the rotor are pointed...0 degrees would be NEUTRAL lift ;) Hope this helps. I'm NOT a heli expert, but I'm "expert" enough to crash along side you ;) When and if you get up the courage to try again, hit up my links, since the hobby shop evidently can't help too much (unfortunately - sometimes this happens, but at least they gave you back your money!!!) 330S bit.ly/3cuZU2c 230S bit.ly/3yX2vJP 150S bit.ly/3OmmtUb 150FX bit.ly/3t0RxRc Infusion 180 bit.ly/3v2rsTe Keep in mind, these are BNF heli's so I assume you're using an NX8 or NX10? If not, you will eventually NEED this capability. This is not a cheap step up from an DXs or other similar RTF (Included with RTF) Transmitters....but if you've got the bug, you're putting good money after bad to do RTF's into perpetuity....and you NEED the features to get a good experience out of the heli. Plus then you can copy what I do. NX8 bit.ly/3Ou7Fmk NX10 bit.ly/3RGCgR6 We're here to help, but we admittedly can only help so much. I hope this is enough to point you into the right direction.
@gregoryosen9423
Жыл бұрын
@@BrianPhillipsRC I have a Blade CX 180 ETF Helicopter that is about 15 years old, and I can fly that one fine. I can also fly the 330S on my Real Flight Evolution flight simulator with no problem, even in mode 2. I have 3 micros and a drone also that I fly, so even though I consider myself a beginner, I actually can fly my other helicopters. They are all fixed pitched dual rotor with flybars and I was looking to upgrade to the collective pitch. I was in safe mode when I tried to fly the 330S (I bought the RTF with the DXS and had the mode switch in the down normal (safe) mode. I also know I was in Normal mode because I had control of the throttle. If I was in either of the other modes the rotor would have automatically spooled up. Since the store owner could not fly two of them using the DXS'smeantime,
@gregoryosen9423
Жыл бұрын
@@BrianPhillipsRC Thanks, I have the NX10SE and use it on my airplanes. I am going to hold off until the Horizon RC Fest in June so I can see and talk to others and then hopefully will leave with one. In the meantime, I will just fly my Blade CX and use the simulator to hone my skills.
@petewatts30
Жыл бұрын
I got the fusion 180 the belt driven tail is really nice, doesn't make all them squeaky noises, in normal it's very docile.
@BrianPhillipsRC
Жыл бұрын
I look forward to getting that one at some point!
@iamgnobes
2 жыл бұрын
Yes! Another Brian Phillips RC review video! 🥹
@BrianPhillipsRC
2 жыл бұрын
Thanks Greg!
@brianreece785
2 жыл бұрын
I have the OMP M2 and it flies amazing. They copied it but the OMP is much better for the money. Full metal head and comes with battery for same price.
@BrianPhillipsRC
2 жыл бұрын
We'll check it out.
@genodesan4954
8 ай бұрын
Excellent video I really enjoyed it! The best way I describe safe is a buddy box always with you at the flip of a switch. Taught myself how to fly with it by myself I always try to fly without safe but when a crash is inevitable it is the most important switch on my transmitter haha
@merlavery5057
2 жыл бұрын
You are getting better with hellies my friend.
@BrianPhillipsRC
2 жыл бұрын
Thanks Merl. I'm feeling more comfortable, but still not the same as with planes. I think it'll just "click" one day! Appreciate the encouragement!
@gbro8822
2 жыл бұрын
Thank you guys. That would be fun to take camping.
@BrianPhillipsRC
2 жыл бұрын
yeah, plus these helis are small!
@johncgibson4720
Жыл бұрын
I heard from Ethan Ater that the spare parts of Infusion are very different from the regular S180 and S150. And I am suspecting that this Infusion isn't designed in-house by horizon like the old days. Something changed in their business structure.
@Nox9lives
2 жыл бұрын
Mr Philips ,dis a nice 2 level beginner helicopter to have ,instead of dat drone from last time
@BrianPhillipsRC
2 жыл бұрын
sure!
@jakelang4387
2 жыл бұрын
Been meaning to get one,,gues there having problems with the rotor head block.. probably using up 150 ones ,and they fit loose I heard
@jimmytheriot8978
2 жыл бұрын
Check out my homemade fpv cockpit with the dji system hooked to it and like, share, and subscribe
@BrianPhillipsRC
2 жыл бұрын
I haven't had issues, but I'm not pushing the limits either.
@levinav2297
2 жыл бұрын
I always love your intro.
@BrianPhillipsRC
2 жыл бұрын
Thanks Levi!
@Runk3lsmcdougal
3 ай бұрын
Veryyyy cool copter
@BOPilot5517
2 жыл бұрын
Need to do some full blown acro with that little guy!
@BrianPhillipsRC
2 жыл бұрын
If I could - I would - LOL ;) I need more practice ;)
@k-ninebike2180
2 жыл бұрын
Nice job! I'm to old and slow to push the limits, anymore. Just do the best I can to keep flying. Did you say you were selling some RC stuff? Do you have a link to that? Thanks
@BrianPhillipsRC
2 жыл бұрын
www.brianphillipsrc.com - we have some plans in the works... think "merch" but more tailored to RC. Also just having people follow links is how we finance this whole thing ;)
@petewatts30
2 жыл бұрын
I do like the look of this but I have a 150s, the omp helis I would need to buy a satellite receiver to use the nx8.
@BrianPhillipsRC
2 жыл бұрын
Yes, true!
@STANG-us2mz
2 жыл бұрын
Hey Brian just a thought too, how about that new Goosky L2 legend... That is a basically M2 and Fusion with no safe but a baby looking raw sab and a awesome canopy design... Just a thought...👊👊
@BrianPhillipsRC
2 жыл бұрын
Not a bad idea
@nsbob70
2 жыл бұрын
yer fingers sure do move awful fast on that raido!! Was trying to keep up, pausing, rewinding, got myself all messed up! lol Having a hard time with mine.
@marckjato
2 жыл бұрын
It would be awesome to see you do a full review on the blade fusion 360 smart 3S
@BrianPhillipsRC
2 жыл бұрын
Soon, if HH permits ;)
@westhobbiesrc8051
2 жыл бұрын
I have one on my channel
@marckjato
2 жыл бұрын
@@westhobbiesrc8051 I’m trying to figure out if I’ll buy the 330s or the fusion 360
@westhobbiesrc8051
2 жыл бұрын
@@marckjato check out the videos on my channel. I have on boxing radio set up as well as Flight video. I would highly recommend the 360 over the 330. For multiple reasons, number one the 330 is an older design. It actually is the same frame, servo layout and motor as the original blade 400 from 10+ years ago. It is not a bad helicopter but it is definitely outdated in terms of performance design. The 360 is just incredible! Hands-down the best model blade has ever made. Carbon fiber main frame incredible tail performance and authority with oversize tail boom. Perfect flight stabilization for the beginner to hard-core 3-D a little bit bigger blade diameter so you’re gonna get a little bit more of a floaty feeling model.
@petewatts30
2 жыл бұрын
I think the fusion 360 will be your new favourite.
@keitha.9788
2 жыл бұрын
Today (Sept.9), Horizon recommends only an 850mAh battery. But that battery is now on back-order until December. They told me this morning that I could buy one from them, but it will come bundled with a dinky S120 charger. I already have a much higher capacity charger than the one they are trying to sell me. My guess is that they have a bunch of S120 chargers that they are desperately trying to get rid of....
@n1zgi
Жыл бұрын
FYI, Amazon has them in stock
@5td9jg
2 жыл бұрын
Hey Brian, can I ask you if you have ordered the Blade Fusion 180 for review yet? I'd love to see you do a review on it.
@BrianPhillipsRC
2 жыл бұрын
I don't have it on my list yet, but would definitely like to do it!
@mjflorido5458
Жыл бұрын
Can you do a video on how to set up pack voltage in telemetry to warn when throttle is low? I don’t want to use a timer.
@gregoryosen9423
Жыл бұрын
For a first Heii would you recommend the Blade 230S, the Fusion 180 or the FW200 to learn on?
@BrianPhillipsRC
Жыл бұрын
None of those, if you're totally new. They're AMAZING choices, but to be honest, I'd get a cheap one, and just learn the controls, then work your way up to one of them. IF you already know how to fly a FIXED WING PLANE or QUAD, you could start with Blade or Fusion...but the FW200 is too much help...it won't help you learn to fly, but it is AMAZING to see, and one of the few "Drone" heli's I would say is worth considering. HOWEVER, if you want to watch the amazing flight of a "Drone" type heli flight, why not get a "SCALE" looking one, like this - Coast Guard Heli - bprc.me/uscg_heli Here's some "cheap ones" (RTF - Ready to Fly) that might save you a few bucks while you're learning... E110 bit.ly/3yVniit
@skeeter06b
Жыл бұрын
cannot figure the settings for tx16s as values differ. any ideas?
@BrianPhillipsRC
Жыл бұрын
I don't have one, so I can't say. Very sorry about that Jay
@rylanstilwell7477
8 ай бұрын
Hello Brian sorry to bother you but I have a spectrum dxs and was wondering if it will work with this helicopter or would I have to buy a different transmitter thanks in advance
@sasquatchhadarock968
7 ай бұрын
Nice to get all the "necessary" tools in the box but uh, Horizon Hobby if you see this: those allen wrenches are almost worse than worthless. Too short, too awkward to get screws turning. Yes, they *can* get it done, but since 95% of the screws on the 180 Infusion are 1.5mm hex heads, why not just put a proper mini plastic handled hex driver in instead of the allen wrench? I had already ordered some nice, long-handled drivers from Dynamite which are worlds better than allen wrenches so it didn't matter too much for me, but still.
@57heeler
2 жыл бұрын
Dang, posted only 18 minutes ago and already 62 views. I hate to b late...........another cool shakedown of course.
@BrianPhillipsRC
2 жыл бұрын
Thanks Timmy ;)
@STANG-us2mz
2 жыл бұрын
So far the fusion 180s smart belted is better IMO.. Infusion is for beginners... HH is trying to copy OMP M1/M2 which is way better... I personally just picked up the Fusion 180s and own a gen 1 M2 OMP... From what other's I asked about the Infusion vs Fusion 180s belted, belted is better of the two.. I was told it's night and day hands down better from Coeshow619, man hes not joking... If you have a chance review M2 OMP it's a gen2 now but only skids are plastic over the gen1 carbon skids is the difference.. Gen1 M2s are not available anymore M1 I think is smaller some but I haven't tried it... The M2 and belted fusion 180s just a thought? Next heli up Brian??
@BrianPhillipsRC
2 жыл бұрын
I'm not 100% sure what the next HH heli will be, but we have a few in the "queue" now waiting for filing ;)
@STANG-us2mz
2 жыл бұрын
👊👊
@jbpark8719
2 жыл бұрын
와! 블레이드에서 괜찮은 기체가 나왔네요. 앞마당 비행장 너무 좋아요! ❤
@BrianPhillipsRC
2 жыл бұрын
Thanks! This is our home ;) Blade makes a good heli!
@davesfishingadventuressout8020
2 жыл бұрын
great video what size battery did you use
@BrianPhillipsRC
2 жыл бұрын
In the description (both) - we didn't have a 600mAh as they suggested, so we did a 350 and 800 (right???)
@THEMANCAVE2023
2 жыл бұрын
any idea why mine on normal mode had no limits control and it crashed brand new no stability at all
@BrianPhillipsRC
2 жыл бұрын
Did you turn on SAFE? That's one mistake I made when I first got my Blade 230S.
@THEMANCAVE2023
2 жыл бұрын
@@BrianPhillipsRC umm, just thought that was on by default in normal mode ? How do I turn that on?
@Mickado64
11 ай бұрын
Hello, which is better, the Blade 180 infusion or the GOOSKY S2?
@BrianPhillipsRC
11 ай бұрын
Okay, here's my BIAS, as you're probably aware, I prefer the Horizon Hobby / Spektrum products, since we have more experience with them, but in this case, the OMP M# lineup is so dang good!!! bprc.me/InFusion180 bprc.me/3S_850 | bprc.me/3S_450 bprc.me/Tx VS We never actually did the OMP M2, but we did the Goosky offering opposite it, but we work with Buddy RC...here's the link... bprc.me/OMP_M2 VS bprc.me/GooskyS2_BNF | bprc.me/Goosky_S2_RTF
@Mickado64
10 ай бұрын
@@BrianPhillipsRC I ordered the 180 infusion and the S2 Goosky
@mjflorido5458
Жыл бұрын
Do you know how to hover in all orientations?
@Vlad-fj8fz
2 жыл бұрын
My nx8 doesn’t have the forward programming button, is that something with the new update. How do I make sure my safe is working
@BrianPhillipsRC
2 жыл бұрын
Forward Programming button? Do you mean BIND button??? I'm not sure I understand your quesiton.
@Vlad-fj8fz
2 жыл бұрын
At 51:05 in the video you went into a tab called “forward programming” on the NX8. I was following along and noticed I don’t have that on my controller. 🤷♂️
@joegroves2517
2 жыл бұрын
Nice! How much more intense would you say that is than a 150s in and out of safe?
@BrianPhillipsRC
2 жыл бұрын
They're similar, but this heli is better put together...better features, better motors, cooler looking, but both are great heli's for a guy of my skill level. Probably comes down to availability and price.
@joegroves2517
2 жыл бұрын
@@BrianPhillipsRC Thanks, that helps a lot! I was thinking 150 but this looks niftier and runs on the batteries I already have for my Ultrix, but I was afraid it would be a lot scarier.
@Mickado64
10 ай бұрын
I don't have F mode, I have a DX6e. How to do ? 38:20
@BrianPhillipsRC
10 ай бұрын
I don't know anything about the DX6e from first hand use, but I THOUGHT you at least had FLIGHT MODE...
@protoplasmia
2 жыл бұрын
Anyone try flying this on a 450mah 4s battery?
@SupremeRC
2 жыл бұрын
Update
@BrianPhillipsRC
2 жыл бұрын
?
@pstarxxx78
2 жыл бұрын
How do I put stability on stunt 2 ?
@BrianPhillipsRC
2 жыл бұрын
In forward programming, if you want it
@pstarxxx78
2 жыл бұрын
@@BrianPhillipsRC thanks I see now. I had to flip the motor on switch to let the stunt modes come up on the display. The 1st time I did that it kicked the motor on. So I was a timid to do that again. Thinking about it now. I probably wasn’t in forward programming.
@maxair420
2 жыл бұрын
👍🏽
@BrianPhillipsRC
2 жыл бұрын
thanks!
@boomer2282
2 жыл бұрын
Nice electric trimmer 🤣
@BrianPhillipsRC
2 жыл бұрын
LOL - exactly!
@Twx97
2 жыл бұрын
You need to invest some time in a sim. YOU NEED
@BrianPhillipsRC
2 жыл бұрын
I have simulator.
@Twx97
2 жыл бұрын
@@BrianPhillipsRC spend some time on it. Just a 72 hours and you will see alot of progress. And stop flying in safe just use as rescue mode
@mastersteel1079
2 жыл бұрын
Hello Brian😁😁😁🍻🍻🍻🍻🍻🍻🏆🏆🏆🏆🔝🔝🔝
@BrianPhillipsRC
2 жыл бұрын
Welcome back Master Steel!
@giulianorodrigomedina8593
2 жыл бұрын
Show, poderia me dar de presente 🎁
@BrianPhillipsRC
2 жыл бұрын
You can buy one if you want it ;) Infusion 180 bit.ly/3tjqpgJ
@dalerbsr.5061
2 жыл бұрын
Sorry can't watch this entire video on another non-scale HH heli, same ol same ol thing... lmao
@BrianPhillipsRC
2 жыл бұрын
I too wish they'd make some scale helis - how hard would it be??? ;)
@DetoursRC
2 жыл бұрын
Omp m2 is better. Lol
@BrianPhillipsRC
2 жыл бұрын
Haven't tried that one yet. I have a few distributors offering it, so we'll have to check it out.
@DetoursRC
2 жыл бұрын
@@BrianPhillipsRC the M2 explore is the same price as this infusion including battery but the M2 v2 is like $100 more than this infusion. The new explore version has full metal head.
@shademe
Жыл бұрын
Omp m1 and m2 are far superior helis. I own blade helis and omp there is simply no comparison apple's to oranges
@BrianPhillipsRC
Жыл бұрын
We are working with OMP to do the new M ;) Not 100% settled, but working on it now - can't wait!
Пікірлер: 107